Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYDROLOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Interconnected Hydrologic Extreme Drivers and Impacts Depicted By Remote Sensing Data Assimilation

In a changing climate, the likelihood of hydrologic extremes has been increasing as climate change can impact both means and extremes4 of hydrologic cycle processes, potentially resulting in an increased frequency of floods in some regions and decreases in others. In a warming world, the physical processes that affect hydrologic response, such as rain-on snow runoff events, are also changing, such that the seasonality of streamflow has been shifting. The geography of rain-on-snow runoff events is predicted to move from low to high elevations. In addition to floods, there is also potential for an increase in dry extremes in a warming world with increased drought frequency and occurrences in many parts of the world. The increased frequency of drought and heatwave events is expected to have consequences such as escalating crop failures in future projection scenarios1. Thus, the consensus of literature shows that climate change is increasing the magnitude and frequency of extreme hydrologic events, and the human influence in many of these events is substantial.

Timothy M. Lahmers↗

How Have Hydrological Extremes Changed Over the Past 20 Years?

Severe floods and droughts, including their back-to-back occurrences (weather whiplash), have been increasing in frequency and severity around the world. Improved understanding of systematic changes in hydrological extremes is essential for preparation and adaptation. In this study, we identified and quantified extreme wet and dry events globally by applying a clustering algorithm to terrestrial water storage (TWS) data from the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (FO). The most intense events, ranked using an intensity metric, often reflect impacts of large-scale oceanic oscillations such as El Niño–Southern Oscillation and consequences of climate change. The severity of both wet and dry events, represented by standardized TWS anomalies, increased significantly in most cases, likely associated with intensification of wet and dry weather regimes in a warmer world, and consequently, exhibited strongest correlation with global temperature. In the Dry climate, the number of wet events decreased while the number of dry events increased significantly, suggesting a drying trend that may be attributed to climate variability and possible increases in irrigation and reliance on groundwater. In the Continental climate where temperature has risen faster than global average, dry events increased significantly. Characteristics of extreme events often showed strong correlations with global temperature, especially when averaged over all climates. These results suggest changes in hydrological extremes and underscore the importance of quantifying total water storage changes when studying hydrological extremes. Extending the GRACE/FO record, which spans 2002 to the present, is essential to continuously tracking changes in TWS and hydrological extremes.

Bailing Li↗

An Observation-Driven Framework for Modeling Post-Fire Hydrologic Response: Evaluation for Two Central California Case Studies

In a warming climate, wildfires are becoming increasingly common, especially in semi-arid environments. Wildfires can disrupt forest ecosystems and induce changes to the land surface. Collectively, these impacts can alter the hydrologic response of a catchment following a fire, resulting in increased potential for surface runoff, reduced evapotranspiration, and, ultimately, a higher risk for flash flooding and mass wasting. The timescale for post-fire recovery of hydrological processes to return to pre-fire conditions is not well established due to the lack of ground measurements. Accurate characterization of fire impacts on hydrologic response is also challenging to simulate, given the complex interplay of various processes. Here, we present a generalized framework to quantify wildfire impacts on runoff generation. We consider the vegetation and soil disturbances as the primary contributors to post-fire floods. Using an ensemble modeling structure to account for parameter uncertainty and consider model sensitivity, remotely sensed leaf area index (LAI) is assimilated into a land surface model (LSM) to simulate vegetation disturbance, and the maximum land surface saturation LSM parameter is decreased to parameterize the soil disturbance following observed fires. We evaluated the impacts of fire-induced changes to LAI and soil saturation on hydrologic states like runoff and evapotranspiration. Analysis of two events in central California shows that 1) the LAI assimilation has a greater impact on water balance; and 2) the soil scheme captures a range of outcomes, with substantial impacts on surface runoff for some ensemble members, which could affect flood potential.

Timothy M Lahmers↗

Assessment of Required Accuracy of Digital Elevation Data for Hydrologic Modeling

The effect of vertical accuracy of Digital Elevation Models (DEMs) on hydrologic models is evaluated by comparing three DEMs and resulting hydrologic model predictions applied to a 7.2 sq km USDA - ARS watershed at Mahantango Creek, PA. The high resolution (5 m) DEM was resempled to a 30 m resolution using method that constrained the spatial structure of the elevations to be comparable with the USGS and SIR-C DEMs. This resulting 30 m DEM was used as the reference product for subsequent comparisons. Spatial fields of directly derived quantities, such as elevation differences, slope, and contributing area, were compared to the reference product, as were hydrologic model output fields derived using each of the three DEMs at the common 30 m spatial resolution.

HYDROLOGIC MODELS↗

A Model-Model and Data-Model Comparison for the Early Eocene Hydrological Cycle

A range of proxy observations have recently provided constraints on how Earth's hydrological cycle responded to early Eocene climatic changes. However, comparisons of proxy data to general circulation model (GCM) simulated hydrology are limited and inter-model variability remains poorly characterised. In this work, we undertake an intercomparison of GCM-derived precipitation and P - E distributions within the extended EoMIP ensemble (Eocene Modelling Intercomparison Project; Lunt et al., 2012), which includes previously published early Eocene simulations performed using five GCMs differing in boundary conditions, model structure, and precipitation-relevant parameterisation schemes. We show that an intensified hydrological cycle, manifested in enhanced global precipitation and evaporation rates, is simulated for all Eocene simulations relative to the preindustrial conditions. This is primarily due to elevated atmospheric paleo-CO2, resulting in elevated temperatures, although the effects of differences in paleogeography and ice sheets are also important in some models. For a given CO2 level, globally averaged precipitation rates vary widely between models, largely arising from different simulated surface air temperatures. Models with a similar global sensitivity of precipitation rate to temperature (dP=dT ) display different regional precipitation responses for a given temperature change. Regions that are particularly sensitive to model choice include the South Pacific, tropical Africa, and the Peri-Tethys, which may represent targets for future proxy acquisition. A comparison of early and middle Eocene leaf-fossil-derived precipitation estimates with the GCM output illustrates that GCMs generally underestimate precipitation rates at high latitudes, although a possible seasonal bias of the proxies cannot be excluded. Models which warm these regions, either via elevated CO2 or by varying poorly constrained model parameter values, are most successful in simulating a match with geologic data. Further data from low-latitude regions and better constraints on early Eocene CO2 are now required to discriminate between these model simulations given the large error bars on paleoprecipitation estimates. Given the clear differences between simulated precipitation distributions within the ensemble, our results suggest that paleohydrological data offer an independent means by which to evaluate model skill for warm climates.

Boundary conditions↗

Length Scales of Hydrological Variability as Inferred from SMAP Soil Moisture Retrievals

Hydrological variability at a given location is characterized in part by a horizontal length scale – a measure of how far one can travel from that location and still see similar time variations of a hydrological variable of interest. Here, using Level-2 soil moisture retrievals produced by the NASA Soil Moisture Active Passive (SMAP) mission, we compute global distributions of these length scales for the Northern Hemisphere warm and cold seasons (May-September and November-March, respectively). The length scales show significant spatial and seasonal variability, with, as expected, much larger values (e-folding scales of greater than 500 km) often seen in the cold season, when convective rainfall is less prominent. The SMAP-derived length scales are found to be largely consistent with those derived directly, where possible, from precipitation measurements. This suggests a unique value of the retrievals: outside of well-instrumented areas, satellite-based soil moisture datasets have the potential to provide otherwise unattainable estimates of the horizontal length scales of hydrological variability.

Hydrology↗

Tropical peatland hydrology simulated with a global land surface model

Tropical peatlands are among the most carbon-dense ecosystems on Earth, and their water storage dynamics strongly control these carbon stocks. The hydrological functioning of tropical peatlands differs from that of northern peatlands, which has not yet been accounted for in global land surface models (LSMs). Here, we integrated tropical peat-specific hydrology modules into a global LSM for the first time, by utilizing the peatland-specific model structure adaptation (PEATCLSM) of the NASA Catchment Land Surface Model (CLSM). We developed literature-based parameter sets for natural (PEATCLSM(Trop,Nat)) and drained (PEATCLSM(Trop,Drain)) tropical peatlands. Simulations with PEATCLSM(Trop,Nat) were compared against those with the default CLSM version and the northern version of PEATCLSM (PEATCLSM(North,Nat)) with tropical vegetation input. All simulations were forced with global meteorological reanalysis input data for the major tropical peatland regions in Central and South America, the Congo Basin, and Southeast Asia. The evaluation against a unique and extensive data set of in situ water level and eddy covariance-derived evapotranspiration showed an overall improvement in bias and correlation compared to the default CLSM version. Over Southeast Asia, an additional simulation with PEATCLSM(Trop,Drain) was run to address the large fraction of drained tropical peatlands in this region. PEATCLSM(Trop,Drain) outperformed CLSM, PEATCLSM(North,Nat) and PEATCLSM(Trop,Nat) over drained sites. Despite the overall improvements of PEATCLSM(Trop,Nat) over CLSM, there are strong differences in performance between the three study regions. We attribute these performance differences to regional differences in accuracy of meteorological forcing data, and differences in peatland hydrologic response that are not yet captured by our model.

Peatland↗

A sensitivity analysis of regional and small watershed hydrologic models

Continuous simulation models of the hydrologic behavior of watersheds are important tools in several practical applications such as hydroelectric power planning, navigation, and flood control. Several recent studies have addressed the feasibility of using remote earth observations as sources of input data for hydrologic models. The objective of the study reported here was to determine how accurately remotely sensed measurements must be to provide inputs to hydrologic models of watersheds, within the tolerances needed for acceptably accurate synthesis of streamflow by the models. The study objective was achieved by performing a series of sensitivity analyses using continuous simulation models of three watersheds. The sensitivity analysis showed quantitatively how variations in each of 46 model inputs and parameters affect simulation accuracy with respect to five different performance indices.

Ambaruch, R.↗

The application of remote sensing to the development and formulation of hydrologic planning models

The development of a remote sensing model and its efficiency in determining parameters of hydrologic models are reviewed. Procedures for extracting hydrologic data from LANDSAT imagery, and the visual analysis of composite imagery are presented. A hydrologic planning model is developed and applied to determine seasonal variations in watershed conditions. The transfer of this technology to a user community and contract arrangements are discussed.

Fowler, T. R.↗

Remote sensing inputs to landscape models which predict future spatial land use patterns for hydrologic models

A tropical forest area of Northern Thailand provided a test case of the application of the approach in more natural surroundings. Remote sensing imagery subjected to proper computer analysis has been shown to be a very useful means of collecting spatial data for the science of hydrology. Remote sensing products provide direct input to hydrologic models and practical data bases for planning large and small-scale hydrologic developments. Combining the available remote sensing imagery together with available map information in the landscape model provides a basis for substantial improvements in these applications.

Miller, L. D.↗

The utility of short wavelength (1mm) remote sensing techniques for the monitoring and assessment of hydrologic parameters

Remote sensing programs that respond to the requirements of the water resources management and hydrologic communities are reviewed. The major areas where the needs of water resources management are being met involve the mapping and monitoring of snowcovered areas, hydrologic landuse, and surface water area. In the case of snowcovered area mapping the transfer of technology process is now being accomplished in the Western United States in a cooperative effort involving 6 federal agencies and 3 state agencies along with NASA. A new collaborative effort of the U.S. Army Corps of Engineers and NASA involves the mapping of landuse by Landsat and its use in hydrologic engineering watershed models employed in flood control/waterworks planning, design, and management. Improved systems planned for implementation in the 1978-1981 time frame can be expected to result in increased utilization of visible and near infrared remote sensing observations.

Rango, A.↗

Utilization of remote sensing observations in hydrologic models

Most of the remote sensing related work in hydrologic modeling has centered on modifying existing models to take advantage of the capabilities of new sensor techniques. There has been enough success with this approach to insure that remote sensing is a powerful tool in modeling the watershed processes. Unfortunately, many of the models in use were designed without recognizing the growth of remote sensing technology. Thus, their parameters were selected to be map or field crew definable. It is believed that the real benefits will come through the evolution of new models having new parameters that are developed specifically to take advantage of our capabilities in remote sensing. The ability to define hydrologically active areas could have a significant impact. The ability to define soil moisture and the evolution of new techniques to estimate evoportransportation could significantly modify our approach to hydrologic modeling. Still, without a major educational effort to develop an understanding of the techniques used to extract parameter estimates from remote sensing data, the potential offered by this new technology will not be achieved.

Ragan, R. M.↗

Strategies for using remotely sensed data in hydrologic models

Present and planned remote sensing capabilities were evaluated. The usefulness of six remote sensing capabilities (soil moisture, land cover, impervious area, areal extent of snow cover, areal extent of frozen ground, and water equivalent of the snow cover) with seven hydrologic models (API, CREAMS, NWSRFS, STORM, STANFORD, SSARR, and NWSRFS Snowmelt) were reviewed. The results indicate remote sensing information has only limited value for use with the hydrologic models in their present form. With minor modifications to the models the usefulness would be enhanced. Specific recommendations are made for incorporating snow covered area measurements in the NWSRFS Snowmelt model. Recommendations are also made for incorporating soil moisture measurements in NWSRFS. Suggestions are made for incorporating snow covered area, soil moisture, and others in STORM and SSARR. General characteristics of a hydrologic model needed to make maximum use of remotely sensed data are discussed. Suggested goals for improvements in remote sensing for use in models are also established.

Peck, E. L.↗

Review of Hydrologic Models for Evaluating Use of Remote Sensing Capabilities

Hydrologic models most commonly used by federal agencies for hydrologic forecasting are reviewed. Six catchment models and one snow accumulation and ablation model are reviewed. Information on the structure, parameters, states, and required inputs is presented in schematic diagrams and in tables. The primary and secondary roles of parameters and state variables with respect to their function in the models are identified. The information will be used to evaluate the usefulness of remote sensing capabilities in the operational use of hydrologic models.

Peck, E. L.↗

Global Hydrologic Cycle

One of the major scientific questions in hydrology is: Can remote sensing data be used effectively with models to improve our understanding of hydrologic processes? Virtually all hydrologic models, with only a few exceptions, were designed to interface with conventional point data. These models must be modified or new ones developed to be compatible with remote sensing capabilities (areal coverage, high spatial resolution, repetitiveness, etc.). A comprehensive program of development and testing of these models at various application scales ranging from flash flood modeling and small tributary streams to continental size general circulation models must be carried out.

Rango, A.↗

Multispectral Imaging Science Working Group for Hydrologic Science: Executive summary

The following working objectives were adopted: (1) define the current state of knowledge concerning the role of multispectral imaging science in hydrology; (2) identify critical areas where gaps in our knowledge limit opportunities for significant improvements in our understanding of the hydrologic processes; (3) evaluate the potential of multispectral imaging sciences as tools to close these gaps in knowledge; and (4) develop guidelines for a series of remote-sensing-based experiments that would help close these gaps in knowledge and, thereby, provide man with the improved scientific base necessary for better utilization of the world's water resource. The resulting documentation is intended to provide guidance for multispectral imaging programs in the hydrologic sciences with special emphasis on the visible and infrared (IR) wavelengths.

Source record↗

Microwave hydrology: A trilogy

Microwave hydrology, as the term in construed in this trilogy, deals with the investigation of important hydrological features on the Earth's surface as they are remotely, and passively, sensed by orbiting microwave receivers. Microwave wavelengths penetrate clouds, foliage, ground cover, and soil, in varying degrees, and reveal the occurrence of standing liquid water on and beneath the surface. The manifestation of liquid water appearing on or near the surface is reported by a microwave receiver as a signal with a low flux level, or, equivalently, a cold temperature. Actually, the surface of the liquid water reflects the low flux level from the cosmic background into the input terminals of the receiver. This trilogy describes and shows by microwave flux images: the hydrological features that sustain Lake Baykal as an extraordinary freshwater resource; manifestations of subsurface water in Iran; and the major water features of the Congo Basin, a rain forest.

Stacey, J. M.↗

Hydrologic models for land-atmosphere retrospective studies of the use of LANDSAT and AVHRR data

The use of a Geographic Information System (GIS) and LANDSAT analysis in conjunction with the Simulator for Water Resources on a Rural Basin (SWRRB) hydrologic model to examine the water balance on the Little Washita River basin is discussed. LANDSAT analysis was used to divide the basin into eight non-contiguous land covers or subareas: rangeland, grazed range, winter wheat, alfalfa/pasture, bare soil, water, woodland, and impervious land (roads, quarry). The use of a geographic information system allowed for the calculation of SWRRB model parameters in each subarea. Four data sets were constructed in order to compare SWRRB estimates of hydrologic processes using two methods of maximum LAI and two methods of watershed subdivision. Maximum LAI was determined from a continental scale map, which provided a value of 4.5 for the entire basin, and from its association with the type of land-cover (eight values). The two methods of watershed subdivision were determined according to drainage subbasin (four) and the eight land-covers. These data sets were used with the SWRRB model to obtain daily hydrologic estimates for 1985. The results of the one year analysis lead to the conclusion that the greater homogeneity of a land-cover subdivision provides better water yield estimates than those based on a drainage properties subdivision.

Duchon, Claude E.↗