Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterogeneity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Worst crosstalk analysis in heterogeneous and trench assisted heterogeneous multicore fiber for different core counts and layouts

In order to obtain appreciably low worst crosstalk level in high core count multicore fiber, heterogeneous MCF with different core configurations and layouts have been investigated analytically using coupled mode equation. The variations in worst crosstalk behavior with respect to the bending radius, core configurations, core layouts, and outer cladding thickness have been analyzed. Further, the core count dependent variations in worst crosstalk level, core pitch, and peak bending radius in different core layouts have been presented. It has been observed that the selection of core configuration, core layout, and outer cladding thickness have significant impact on the reduction in worst crosstalk level. For example, in 12-core normal-index heterogeneous MCF with SLS structure, the core Configuration 1 can provide the worst crosstalk level reduced by 7.09 dB and 16.92 dB in comparison to the other two core configurations, i.e., Configuration 2, and Configuration 3, respectively. Further, for the same core count with TA Configuration 1, SLS core layout can achieve the reduced worst crosstalk level in comparison with circular ORS and DRS, hexagonal ORS and DRS respectively by 24.62 dB, 25.86 dB, 28.87 dB and 30.64 dB.

36 MATERIALS SCIENCE↗

Experimental characterization and crystal plasticity modeling of heterogeneous deformation in polycrystalline {alpha}-Ti.

Grain-level heterogeneous deformation was studied in a polycrystalline {alpha}-Ti specimen deformed by four-point bending. Dislocation slip activity in the microstructure was investigated by surface slip trace analysis. Three-dimensional-X-ray diffraction (3D-XRD) was used to investigate subsurface lattice rotations and to identify geometrically necessary dislocations (GNDs). The slip systems of local GNDs were analyzed by studying the streaking directions of reflections in corresponding Laue patterns. The analysis performed in one grain indicated that the subsurface GNDs were from the same slip system identified using slip trace analysis in backscattered electron images. A crystal plasticity finite element (CPFE) model was used to simulate deformation of the same microstructural region. The predictions of dislocation slip activity match the general aspects of the experimental observations, including the ability to simulate the activation of different slip systems in grains where multiple slip systems were activated. Prediction of local crystal rotations, however, was the least accurate aspect of the CPFE model.

36 MATERIALS SCIENCE↗

Surface Induced Dissociation Coupled with High Resolution Mass Spectrometry Unveils Heterogeneity of a 211 kDa Multicopper Oxidase Protein Complex

Manganese oxidation is an important biogeochemical process that is largely regulated by bacteria through enzymatic reactions. However, the detailed mechanism is poorly understood due to challenges in isolating and characterizing these unknown enzymes. A manganese oxidase, Mnx, from Bacillus sp. PL-12 has been successfully overexpressed in active form as a protein complex with a molecular mass of 211 kDa. We have recently used surface induced dissociation (SID) and ion mobility-mass spectrometry (IM-MS) to release and detect folded subcomplexes for determining subunit connectivity and quaternary structure. The data from the native mass spectrometry experiments led to a plausible structural model of this multicopper oxidase, which has been difficult to study by conventional structural biology methods. It was also revealed that each Mnx subunit binds a variable number of copper ions. Becasue of the heterogeneity of the protein and limited mass resolution, ambiguities in assigning some of the observed peaks remained as a barrier to fully understanding the role of metals and potential unknown ligands in Mnx. In this study, we performed SID in a modified Fourier transform-ion cyclotron resonance (FTICR) mass spectrometer. The high mass accuracy and resolution offered by FTICR unveiled unexpected artificial modifications on the protein that had been previously thought to be iron bound species based on lower resolution spectra. Additionally, isotopically resolved spectra of the released subcomplexes revealed the metal binding stoichiometry at different structural levels. This method holds great potential for in-depth characterization of metalloproteins and protein–ligand complexes. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Self-consistent clustering analysis: an efficient multiscale scheme for inelastic heterogeneous materials

A predictive computational theory is shown for modeling complex, hierarchical materials ranging from metal alloys to polymer nanocomposites. The theory can capture complex mechanisms such as plasticity and failure that span across multiple length scales. This general multiscale material modeling theory relies on sound principles of mathematics and mechanics, and a cutting-edge reduced order modeling method named self-consistent clustering analysis (SCA) [Zeliang Liu, M.A. Bessa, Wing Kam Liu, “Self-consistent clustering analysis: An efficient multi-scale scheme for inelastic heterogeneous materials,” Comput. Methods Appl. Mech. Engrg. 306 (2016) 319–341]. SCA reduces by several orders of magnitude the computational cost of micromechanical and concurrent multiscale simulations, while retaining the microstructure information. This remarkable increase in efficiency is achieved with a data-driven clustering method. Computationally expensive operations are performed in the so-called offline stage, where degrees of freedom (DOFs) are agglomerated into clusters. The interaction tensor of these clusters is computed. In the online or predictive stage, the Lippmann-Schwinger integral equation is solved cluster-wise using a self-consistent scheme to ensure solution accuracy and avoid path dependence. To construct a concurrent multiscale model, this scheme is applied at each material point in a macroscale structure, replacing a conventional constitutive model with the average response computed from the microscale model using just the SCA online stage. A regularized damage theory is incorporated in the microscale that avoids the mesh and RVE size dependence that commonly plagues microscale damage calculations. The SCA method is illustrated with two cases: a carbon fiber reinforced polymer (CFRP) structure with the concurrent multiscale model and an application to fatigue prediction for additively manufactured metals. For the CFRP problem, a speed up estimated to be about 43,000 is achieved by using the SCA method, as opposed to FE2, enabling the solution of an otherwise computationally intractable problem. The second example uses a crystal plasticity constitutive law and computes the fatigue potency of extrinsic microscale features such as voids. This shows that local stress and strain are capture sufficiently well by SCA. This model has been incorporated in a process-structure-properties prediction framework for process design in additive manufacturing.

Liu, Z.↗

A two-set order parameters phase-field modeling of crack deflection/penetration in a heterogeneous microstructure

Modeling of crack deflection/penetration or manifested as intergranular/transgranular fracture in polycrystals has long been a challenge in both fracture mechanics and materials science. A phase-field model formulated with two-set order parameters describing the crack field and the microstructure field respectively, is herein established to investigate the competition between crack penetration and deflection at an interface. The advantages of the proposed model are three-fold: (1) the fracture toughness of grain boundaries and/or interfaces, besides single crystal properties (e.g., Young’s modulus, Poisson ratio, and fracture toughness), can be automatically incorporated, (2) cohesive interfaces are treated in one phase-field framework in comparison with the integrated phase-field and cohesive zone model in which cohesive elements have to be manually placed at the interface, and (3) two-set order parameters enable to describe the concurrent crack propagation and microstructure evolution. The proposed model is validated by comparing the simulated critical deflection angles with the results from theoretical analysis of the linear elastic fracture mechanics and the experiments. The model is then applied to a heterogeneous Silicon Nitride polycrystal to determine the effect of interface fracture toughness on the intergranular/transgranular fracture transition and the effective toughness of the materials.

Chen, Hu↗

Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys

Performance enhancement of structural materials in extreme radiation environments has been activelyinvestigated for many decades. Traditional alloys, such as steel, brass and aluminum alloys, normallycontain one or two principal element(s) with a low concentration of other elements. While these existin either a mixture of metallic phases (multiple phases) or in a solid solution (single phase), limited orlocalized chemical disorder is a common characteristic of the main matrix. Fundamentally different fromtraditional alloys, recently developed single-phase concentrated solid-solutio n alloys (CSAs) contain mul-tiple elemental species in equiatomic or high concentrations with different elements randomly arrangedon a crystalline lattice. Due to the lack of ordered elemental arrangement in these CSAs, they exhibit sig-nificant chemical disorder and unique site-to-site lattice distortion. While it is well recognized intraditional alloys that minor additions lead to enhanced radiation resistance, it remains unclear inCSAs how atomic-level heterogeneity affects defect formation, damage accumulation, and microstruc-tural evolution. These knowledge gaps have acted as roadblocks to the development of future-generation energy technology. CSAs with a simple crystal structure, but complex chemical disorder,are unique systems that allow us, through replacing principal alloying elements and modifying concen-trations, to study how compositional complexity influences defect dynamics, and to bridge the knowl-edge gaps through understanding intricate electronic- and atomic-level interactions, mass and energytransfer processes, and radiation resistance performance. Recent advances in defect dynamics and irradi-ation performance of CSAs are reviewed, intrinsic chemical effects on radiation performance arediscussed, and direction for future studies is suggested.

Zhang, Yanwen↗

Multimodal Analysis of Spatially Heterogeneous Microstructural Refinement and Softening Mechanisms in Three-Pass Friction Stir Processed Al4Si Alloy

Multiple thermally and thermomechanically induced microstructural refinement mechanisms can be activated in metallic alloys when subjected to solid phase processing methods such as friction stir processing (FSP). In this work, we provide detailed descriptions of the relationship between region-specific microstructural refinement mechanisms and the variation in microhardness, through a systematic and multimodal microstructural characterization of an FSP-processed 75% cold-rolled Al-4 at.% Si model binary alloy. Spatially resolved high-energy synchrotron X-ray diffraction, electron backscattered diffraction, and scanning transmission electron microscopy were used to understand the spatially heterogeneous microstructural evolution due to FSP. Results provide insights into how mechanisms such as static recovery, static recrystallization, dynamic recovery and recrystallization, geometric and continuous dynamic recrystallization, and particle-stimulated static or dynamic grain nucleation may occur heterogeneously in the microstructure as a function of the distance from the stir zone in processed alloys, directly influencing the degree of softening. The systematic analysis of microstructures and hardness in the FSP-processed model binary alloy given in this work highlights the rich microstructural domains that can be uniquely harnessed through solid phase processing of metallic alloys.

Al4Si, Friction Stir Processing, Geometric Dynamic↗

Establishing a geochemical heterogeneity model for a contaminated vadose zone – Aquifer system

A large set of sediment samples from a 1600 m2 experimental plot within a 2.2 km2 vadose zone and groundwater uranium (VI) plume were subject to physical, chemical, and mineralogic characterization. The plot is being used for field experimentation on U(VI) recharge and transport processes within a persistent groundwater plume that exists in the groundwater-river interaction zone of the Columbia River at the U.S. DOE Hanford site. The samples were obtained during the installation of 35 tightly spaced (10 m separation) groundwater monitoring wells. The characterization measurements for each sample included total contaminant concentrations (U and Cu primarily), bicarbonate extractable U(VI), sequential 238U(VI) contaminant desorption Kd, 233U(VI) adsorption Kd, grain size distribution, surface area, extractable poorly crystalline Fe(III) oxides, and mineralogy. The characterization objective was to inform a conceptual model of coupled processes controlling the anomalous longevity of the plume, and to quantify the spatial heterogeneity of the contaminant inventory and the primary properties effecting reactive transport. Correlations were drawn between chemical, physical, and reaction properties, and Gaussian simulation was used to compute multiple 3-D realizations of extractable U(VI), the 233U(VI) adsorption Kd, and the distribution of the reactive < 2 mm fraction. Adsorbed contaminant U(VI) was highest in the vadose zone and the zone of seasonal water table fluctuation lying at its base. Adsorbed U(VI) was measureable, but low, in the groundwater plume region where very high hydraulic conductivities existed. The distribution of adsorbed U(VI) displayed no apparent correlation with sediment physical or chemical properties. Desorption [238U(IV)] and adsorption [233U(VI)] Kd values showed appreciable differences due to mass transfer controlled surface complexation and the effects of long subsurface residence times. The 233U(VI) adsorption Kd, a combined measure of surface complexation strength and site concentration, was relatively uniform throughout the domain, displaying correlation with fines distribution and surface area. The characterization results revealed U(VI) supplied to the groundwater plume through spatially heterogeneous recharge from residual contamination in the zone of seasonal water table fluctuation, and transport of U(VI) controlled by weak, kinetically-controlled surface complexation in the coarse-textured saturated zone. Geostatistical relationships for the adsorbed contaminant U distribution in the characterization domain allow an extrapolation to inventory at the plume scale, a critical unknown for remedial action.

contaminant heterogeniety, uranium groundwater plu↗

Bayesian and variational Bayesian approaches for flows in heterogeneous random media

In this paper, we study porous media flows in heterogeneous stochastic media. We propose an efficient forward simulation technique that is tailored for variational Bayesian inversion. As a starting point, the proposed forward simulation technique decomposes the solution into the sum of separable functions (with respect to randomness and the space), where each term is calculated based on a variational approach. This is similar to Proper Generalized Decomposition (PGD). Next, we apply a multiscale technique to solve for each term (as in ) and, further, decompose the random function into 1D fields. As a result, our proposed method provides an approximation hierarchy for the solution as we increase the number of terms in the expansion and, also, increase the spatial resolution of each term. We use the hierarchical solution distributions in a variational Bayesian approximation to perform uncertainty quantification in the inverse problem. We conduct a detailed numerical study to explore the performance of the proposed uncertainty quantification technique and show the theoretical posterior concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coaxial Ceramic Direct Ink Writing on Heterogenous and Rough Surfaces: Investigation of Core–Shell Interactions

In this work, coaxial conductor–ceramic direct ink writing enables the printing of sensitive or encapsulated materials onto heterogeneous and rough substrates. While encasing the core fluid within a stiff ceramic shell, continuity may be maintained, even while printing onto conventionally challenging substrates. Here, we report the development of a coaxial ceramic direct ink writing suite and explore coflow interrelationships based on microfluidic principles. A coaxial nozzle is designed to facilitate the coextrusion of an alumina shell, whereas indium–tin-oxide inks constitute the core. In this manner, a core–shell ceramic element may be printed onto rough substrates for future high-temperature applications. Colloidal inks are engineered to provide the required rheological and sintering performance. Moreover, flow simulations in conjunction with microfluidic coflow principles are used to explore the coaxial printing processing space, thus controlling the core–shell architectures. Physical modeling is further used to analyze core deformations and eccentricity. As a result, simulations are validated experimentally, and the analyses are used to deposit coaxial ceramic features onto heterogeneous, high-temperature ceramic substrates.

20 FOSSIL-FUELED POWER PLANTS↗

Method of Distributions for Two‐Phase Flow in Heterogeneous Porous Media

Abstract Multiscale heterogeneity and insufficient characterization data for a specific subsurface formation of interest render predictions of multi‐phase fluid flow in geologic formations highly uncertain. Quantification of the uncertainty propagation from the geomodel to the fluid‐flow response is typically done within a probabilistic framework. This task is computationally demanding due to, for example, the slow convergence of Monte Carlo simulations (MCS), especially when computing the tails of a distribution that are necessary for risk assessment and decision‐making under uncertainty. The frozen streamlines method (FROST) accelerates probabilistic predictions of immiscible two‐phase fluid flow problems; however, FROST relies on MCS to compute the travel‐time distribution, which is then used to perform the transport (phase saturation) computations. To alleviate this computational bottleneck, we replace MCS with a deterministic equation for the cumulative distribution function (CDF) of travel time. The resulting CDF‐FROST approach yields the CDF of the saturation field without resorting to sampling‐based strategies. Our numerical experiments demonstrate the high accuracy of CDF‐FROST in computing the CDFs of both saturation and travel time. For the same accuracy, it is about 5 and 10 times faster than FROST and MCS, respectively.

Yang, Hyung Jun↗

Revealing spatially heterogeneous relaxation in a model nanocomposite

The detailed nature of spatially heterogeneous dynamics of glycerol-silica nanocomposites is unraveled by combining dielectric spectroscopy with atomistic simulation and statistical mechanical theory. Analysis of the spatial mobility gradient shows no “glassy” layer, but the α-relaxation time near the nanoparticle grows with cooling faster than the α-relaxation time in the bulk and is ∼20 times longer at low temperatures. The interfacial layer thickness increases from ∼1.8 nm at higher temperatures to ∼3.5 nm upon cooling to near bulk T{sub g}. A real space microscopic description of the mobility gradient is constructed by synergistically combining high temperature atomistic simulation with theory. Our analysis suggests that the interfacial slowing down arises mainly due to an increase of the local cage scale barrier for activated hopping induced by enhanced packing and densification near the nanoparticle surface. The theory is employed to predict how local surface densification can be manipulated to control layer dynamics and shear rigidity over a wide temperature range.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-resolution 2-D Bragg diffraction reveal heterogeneous domain transformation behavior in a bulk relaxor ferroelectric

In-situ measurement of fine-structure of neutron Bragg diffraction peaks from a relaxor single-crystal using a time-of-flight instrument reveals highly heterogeneous mesoscale domain transformation behavior under applied electric fields. We observed that only 25% of domains undergo reorienta- tion or phase transition contributing to large average strains, while at least 40% remain invariant and exhibit microstrains. Such insights could be central for designing new relaxor materials with better performance and longevity. The current experimental technique can also be applied to resolve com- plex mesoscale phenomena in other functional materials.

36 MATERIALS SCIENCE↗

Heterogeneous Seeding of a Prion Structure by a Generic Amyloid Form of the Fungal Prion-forming Domain HET-s(218-289)

The fungal prion-forming domain HET-s(218–289) forms infectious amyloid fibrils at physiological pH that were shown by solid-state NMR to be assemblies of a two-rung β-solenoid structure. Under acidic conditions, HET-s(218–289) has been shown to form amyloid fibrils that have very low infectivity in vivo, but structural information about these fibrils has been very limited. We show by x-ray fiber diffraction that the HET-s(218–289) fibrils formed under acidic conditions have a stacked β-sheet architecture commonly found in short amyloidogenic peptides and denatured protein aggregates. At physiological pH, stacked β-sheet fibrils nucleate the formation of the infectious β-solenoid prions in a process of heterogeneous seeding, but do so with kinetic profiles distinct from those of spontaneous or homogeneous (seeded with infectious β-solenoid fibrils) fibrillization. Several serial passages of stacked β-sheet-seeded solutions lead to fibrillization kinetics similar to homogeneously seeded solutions. Our results directly show that structural mutation can occur between substantially different amyloid architectures, lending credence to the suggestion that the processes of strain adaptation and crossing species barriers are facilitated by structural mutation.

Wan, William↗

Next Generation Workload Management System For Big Data on Heterogeneous Distributed Computing

The Large Hadron Collider (LHC), operating at the international CERN Laboratory in Geneva, Switzerland, is leading Big Data driven scientific explorations. Experiments at the LHC explore the fundamental nature of matter and the basic forces that shape our universe, and were recently credited for the discovery of a Higgs boson. ATLAS and ALICE are the largest collaborations ever assembled in the sciences and are at the forefront of research at the LHC. To address an unprecedented multi-petabyte data processing challenge, both experiments rely on a heterogeneous distributed computational infrastructure. The ATLAS experiment uses PanDA (Production and Data Analysis) Workload Management System (WMS) for managing the workflow for all data processing on hundreds of data centers. Through PanDA, ATLAS physicists see a single computing facility that enables rapid scientific breakthroughs for the experiment, even though the data centers are physically scattered all over the world. The scale is demonstrated by the following numbers: PanDA manages O(10 2 ) sites, O(10 5 ) cores, O(10 8 ) jobs per year, O(10 3 ) users, and ATLAS data volume is O(10 17 ) bytes. In 2013 we started an ambitious program to expand PanDA to all available computing resources, including opportunistic use of commercial and academic clouds and Leadership Computing Facilities (LCF). The project titled 'Next Generation Workload Management and Analysis System for Big Data' (BigPanDA) is funded by DOE ASCR and HEP. Extending PanDA to clouds and LCF presents new challenges in managing heterogeneity and supporting workflow. The BigPanDA project is underway to setup and tailor PanDA at the Oak Ridge Leadership Computing Facility (OLCF) and at the National Research Center "Kurchatov Institute" together with ALICE distributed computing and ORNL computing professionals. Our approach to integration of HPC platforms at the OLCF and elsewhere is to reuse, as much as possible, existing components of the PanDA system. Finally, we will present our current accomplishments with running the PanDA WMS at OLCF and other supercomputers and demonstrate our ability to use PanDA as a portal independent of the computing facilities infrastructure for High Energy and Nuclear Physics as well as other data-intensive science applications.

97 MATHEMATICS AND COMPUTING↗

Comprehensive Monitoring for Heterogeneous Geographically Distributed Storage

Storage capacity at CMS Tier-1 and Tier-2 sites reached over 100 Petabytes in 2014, and will be substantially increased during Run 2 data taking. The allocation of storage for the individual users analysis data, which is not accounted as a centrally managed storage space, will be increased to up to 40%. For comprehensive tracking and monitoring of the storage utilization across all participating sites, CMS developed a space monitoring system, which provides a central view of the geographically dispersed heterogeneous storage systems. The first prototype was deployed at pilot sites in summer 2014, and has been substantially reworked since then. In this paper we discuss the functionality and our experience of system deployment and operation on the full CMS scale.

Ratnikova, N.↗

Preemptive resource management for dynamically arriving tasks in an oversubscribed heterogeneous computing system

We design resource management heuristics that assign serial tasks to the nodes of a heterogeneous high performance computing (HPC) system. The value of completing these tasks is modeled using monotonically decreasing utility functions that represent the time-varying importance of the task. The value of completing a task is equal to its utility function at the time of its completion. The overall performance of this system is measured using the total utility earned by all tasks during some interval of time. To maximize the performance of such a system where the preemption of tasks is possible, we have designed, analyzed, and compared a set of resource allocation heuristic techniques. We combine two utility-aware heuristics with three different preemption techniques to create six preemption-capable heuristics. We also consider the two utility-aware heuristics without preemption. We use simulation studies to evaluate this set of eight heuristics and compare them with an FCFS heuristic, which is often used in real systems, and random assignments. In general, our set of eight heuristics is able to significantly outperform the comparison heuristics, and the preemption-capable heuristics are able to significantly increase the utility earned compared to the heuristics that do not use preemption. We analyze the performance tradeoffs among the different preemption-capable heuristics under a variety of oversubscribed workload environments.

97 MATHEMATICS AND COMPUTING↗