Search NASA⌕ Search

SEARCH · Search NASA

Results for “High salinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Evaluation of Deep Subsurface Resistivity Imaging for Hydrofracture Monitoring

This report describes the results of the first of its kind monitoring of a hydrofracture operation with electromagnetic measurements. The researchers teamed with oil and gas producer Encana Corporation to design and execute a borehole to surface monitoring of three fracture stages at a well pad in central Colorado. The field project consisted of an equipment upgrade, a survey design and modeling phase, several weeks of data collection, and data processing and interpretation. Existing Depth to Surface Resistivity (DSR) instrumentation was upgraded to allow for continuous high precision recording from downhole sources. The full system can now collect data continuously for up to 72 hours, which is sufficient to measure data for 10 frac stages. Next we used numerical modeling and frac treatment data supplied by Encana to design a field survey to detect EM signal from induced fractures. Prior to modeling we developed a novel technique for using well casing as an antenna for a downhole source. Modeling shows that 1) a measurable response for an induced fracture could be achieved if the facture fluid was of high salinity 2) an optimum fracture response is created when the primary source field is parallel to the well casing but perpendicular to the fracture direction. In mid-July, 2014 we installed an array of more than 100 surface sensors, distributed above the treatment wells and extending for approximately 1 km north and 750 m eastward. We applied a 0.6 Hz square wave signal to a downhole current electrode located in a horizontal well 200 m offset from the treatment well with a return electrode on the surface. The data were transmitted to a recording trailer via Wi-Fi where we monitored receiver and transmitter channels continuously in a 72-hour period which covered 7 frac stages, three of which were high salinity. Although the background conditions were very noisy we were able to extract a clear signal from the high salinity stages. Initial data interpretation attempts consisting of trying to directly invert collected data using a simple background starting model did not produce reasonable models. We next used a simulated data set to develop a constrained inversion workflow that places the downhole fracture in the correct location. Finally, we used a combination of forward and inverse models to fit the collected data to a model that incorporated 3 frac stages. This project provided a first-of-its-kind application of EM technology to map an induced fracture. The results demonstrated a clear anomaly during the operation that can be fit to a reasonable model of an induced fracture.

42 ENGINEERING↗

Thermohaline circulation below the Ross Ice Shelf - A consequence of tidally induced vertical mixing and basal melting

The warmest water below parts of the Ross Ice Shelf resides in the lowest portion of the water column because of its high salinity. Vertical mixing caused by tidal stirring can thus induce ablation by lifting the warm but dense water into contact with the ice shelf. A numerical tidal simulation indicates that vertically well-mixed conditions predominate in the southeastern part of the sub-ice shelf cavity, where the water column thickness is small. Basal melting in this region is expected to be between 0.05 and 0.5 m/yr and will drive a thermohaline circulation having the following characteristics: high salinity shelf water (at - 1.8 C), formed by winter sea ice production in the open Ross Sea, flows along the seabed toward the tidal mixing fronts below the ice shelf; and meltwater (at -2.2 C), produced in the well-mixed region, flows out of the sub-ice shelf cavity along the ice shelf bottom. Sensitivity of this ablation process to climatic change is expected to be small because high salinity shelf water is constrained to have the sea surface freezing temperature.

Macayeal, D. R.↗

Elucidating the Unique Physiological Responses of Halotolerant Scenedesmus sp. Cultivated in Sea Water for Biofuel Production

Utilization of saline or sea water for large-scale cultivation of microalgae can potentially provide a leap towards the reduction of both cost and sustainability challenges for biofuel production. The present investigation evaluated the temporal changes in carbohydrates and fatty acids of a halotolerant microalga Scenedesmus sp. IITRIND2 grown in natural seawater salinity to delineate the differential physiological response towards salt stress and subsequent potential for biofuel production. The microalga showed remarkable ability to tolerate different salinity environments under given temperature and light conditions. Such tolerance was attributed to the increase in neutral sugars, such as glucose, mannose, galactose, fucose and ribose, associated with both structural and storage (and potentially osmoprotectant) polymeric carbohydrates. The carbohydrate rearrangements may aid in the remodeling of cellular components to circumvent the detrimental effects of high salinity. The observed high carbohydrate and lipid accumulation in this microalga signifies its potential for integrated bioethanol and biodiesel production. This work provides a basic understanding towards high salinity adaption of Scenedesmus sp. IITRIND2, which could further be explored for identifying targets for halotolerance in other microalgal strains.

09 BIOMASS FUELS↗

Ecophysiological Changes in Microbial Mats Incubated in a Greenhouse Collaboratory

Microbial mats are modern examples of the earliest microbial communities known. Among the best studied are microbial mats growing in hypersaline ponds managed for the production of salt by Exportadora de Sal, S.A. de C.V., Guerrero Negro, Baja California Sur, Mexico. In May, 2001, we collected mats from Ponds 4 and 5 in this system and returned them to Ames Research Center, where they have been maintained for a period of over nine months. We report here on both the ecophysiological changes occurring in the mats over that period of time as well as the facility in which they were incubated. Mats (approximately 1 sq. meter total area) were incubated in a greenhouse facility modified to provide the mats with natural levels of visible and ultraviolet radiation as well as constantly flowing, temperature-controlled water. Two replicated treatments were maintained, a 'high salinity' treatment (about 120 ppt) and a 'low salinity' treatment (about 90 ppt). Rates of net biological activity (e.g., photosynthesis, respiration, trace gas production) in the mats were relatively constant over the several months, and were similar to rates of activity measured in the field. However, over the course of the incubation, mats in both treatments changed in physical appearance. The most obvious change was that mats in the higher salinity treatments developed a higher proportion of carotenoid pigments (relative to chlorophyll), resulting in a noticeably orange color in the high salinity mats. This trend is also seen in the natural salinity gradient present at the field site. Changes in the community composition of the mats, as assayed by denaturing gradient gel electrophoresis (DGGE), as well as biomarker compounds produced in the mats were also monitored. The degree to which the mats kept in the greenhouse changed from the originally collected mats, as well as differences between high and low salinity mats will be discussed. Additional information is contained in the original extended abstract.

Bebout, Brad↗

Genome sequence of the moderately thermophilic halophile Flexistipes sinusarabici strain (MAS10T)

Flexistipes sinusarabici Fiala et al. 2000 is the type species of the genus Flexistipes in the fami- ly Deferribacteraceae. The species is of interest because of its isolated phylogenetic location in a genomically under-characterized region of the tree of life, and because of its origin from a multiply extreme environment; the Atlantis Deep brines of the Red Sea, where it had to struggle with high temperatures, high salinity, and a high concentrations of heavy metals. This is the fourth completed genome sequence to be published of a type strain of the family Deferribacteraceae. The 2,526,590 bp long genome with its 2,346 protein-coding and 53 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

59 BASIC BIOLOGICAL SCIENCES↗

Formation of Kinetically Trapped Nanoscopic Unilamellar Vesicles from Metastable Nanodiscs

Zwitterionic long-chain lipids (e.g., dimyristoyl phosphatidylcholine, DMPC) spontaneously form onion-like, thermodynamically stable structures in aqueous solutions (commonly known as multilamellar vesicles, or MLVs). It has also been reported that the addition of zwitterionic short-chain (i.e., dihexanoyl phosphatidylcholine, DHPC) and charged long-chain (i.e., dimyristoyl phosphatidylglycerol, DMPG) lipids to zwitterionic long-chain lipid solutions results in the formation of unilamellar vesicles (ULVs). Here, we report a kinetic study on lipid mixtures composed of DMPC, DHPC, and DMPG. Two membrane charge densities (i.e., [DMPG]/[DMPC] = 0.01 and 0.001) and two solution salinities (i.e., [NaCl] = 0 and 0.2 M) are investigated. Upon dilution of the high-concentration samples at 50 °C, thermodynamically stable MLVs are formed, in the case of both weakly charged and high salinity solution mixtures, implying that the electrostatic interactions between bilayers are insufficient to cause MLVs to unbind. Importantly, in the case of these samples small angle neutron scattering (SANS) data show that, initially, nanodiscs (also known as bicelles) or bilayered ribbons form at low temperatures (i.e., 10 °C), but transform into uniform size, nanoscopic ULVs after incubation at 10 °C for 20 h, indicating that the nanodisc is a metastable structure. The instability of nanodiscs may be attributed to low membrane rigidity due to a reduced charge density and high salinity. Moreover, the uniform-sized ULVs persist even after being heated to 50 °C, where thermodynamically stable MLVs are observed. This result clearly demonstrates that these ULVs are kinetically trapped, and that the mechanical properties (e.g., bending rigidity) of 10 C nanodiscs favor the formation of nanoscopic ULVs over that of MLVs. From a practical point of view, this method of forming uniform-sized ULVs may lend itself to their mass production, thus making them economically feasible for medical applications that depend on monodisperse lipid-based systems for therapeutic and diagnostic purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Aquarius Ocean Salinity Mission High Stability L-band Radiometer

The NASA Earth Science System Pathfinder (ESSP) mission Aquarius, will measure global ocean surface salinity with approx.120 km spatial resolution every 7-days with an average monthly salinity accuracy of 0.2 psu (parts per thousand). This requires an L-band low-noise radiometer with the long-term calibration stability of less than or equal to 0.15 K over 7 days. The instrument utilizes a push-broom configuration which makes it impractical to use a traditional warm load and cold plate in front of the feedhorns. Therefore, to achieve the necessary performance Aquarius utilizes a Dicke radiometer with noise injection to perform a warm - hot calibration. The radiometer sequence between antenna, Dicke load, and noise diode has been optimized to maximize antenna observations and therefore minimize NEDT. This is possible due the ability to thermally control the radiometer electronics and front-end components to 0.1 Crms over 7 days.

Pellerano, Fernando A.↗

The Aquarius ocean salinity mission high stability L-band radiometer

The NASA Earth Science System Pathfinder (ESSP) mission Aquarius, will measure global ocean surface salinity with ~120 km spatial resolution every 7-days with an average monthly salinity accuracy of 0.2 psu (parts per thousand) [1]. This requires an L-band low-noise radiometer with the long-term calibration stability of ≤0.15 K over 7 days. The instrument utilizes a push-broom configuration which makes it impractical to use a traditional warm load and cold plate in front of the feedhorns. Therefore, to achieve the necessary performance Aquarius utilizes a Dicke radiometer with noise injection to perform a warm – hot calibration. The radiometer sequence between antenna, Dicke load, and noise diode has been optimized to maximize antenna observations and therefore minimize NEDT. This is possible due the ability to thermally control the radiometer electronics and front-end components to 0.1 °Crms over 7 days.

Freedman, Adam↗

Porous condensers can double the efficiency of membrane distillation

Among membrane distillation (MD) configurations, air gap MD (AGMD) has superior energy efficiency at high salinity. However, flooding of the gap prevents optimal thin gap depths as water removal is a challenge. To address these challenges, this work provides the first analysis of efficiency enhancement via porous wicking conductive condensers in MD. To do so, we examined performance with experiments and comprehensive thermo-fluid numerical models; we find that the porous wick condenser significantly improves thermal efficiency, gain output ratio (GOR), and flux. MD experiments show that the porous copper foam improves the thermal efficiency of air gap membrane distillation up to 40 % and water flux up to 144 %. Numerical modeling shows the porous copper foam improves the GOR of membrane distillation in high salinity by 98.7 %, outperforming air gap MD, permeate gap MD, and conductive gap MD. Furthermore, the optimized thickness and permeability of porous condensers significantly help eliminate the risk of flooding in AGMD.

42 ENGINEERING↗

Molecular thermodynamic modeling of aqueous Na + -K + -Mg 2+ -Ca 2+ -SO 4 2- quinary system

As part of the effort to develop a comprehensive molecular thermodynamic model for high salinity produced water based on the electrolyte nonrandom two-liquid theory, this work presents the model results for the aqueous Na + -K + -Mg 2+ -Ca 2+ -SO 4 2- quinary system. With the binary interaction parameters fully parameterized for the water-electrolyte pairs and the electrolyte-electrolyte pairs, the model satisfactorily describes the thermodynamic properties for the aqueous quinary system and its binary, ternary, and quaternary subsystems for the temperature range 273.15–473.15 K and the salt concentrations up to saturation. The model results are compared with the salt solubility and thermodynamic data available for the subsystems with special attention to systems involving (Ca 2+ SO 4 2- ).

Chemistry↗

Argo Observations of the Deep Mixing Band in the Southern Ocean: A Salinity Modeling Challenge

The Southern Ocean plays an important role in mediating oceanic uptake of CO 2 and heat due to a strong meridional overturning circulation. Gridded Argo float data for 2004–2017 were used to evaluate subsurface processes at the mixed layer depth (MLD) that occur in a narrow deep mixing band. Shifts in the value of the Turner Angle at the MLD indicate that early in the season the MLD deepens slowly as it encounters and is stabilized by a subsurface salt maximum. By September mixing has penetrated this salinity feature and the rate of deepening is faster once the MLD is deeper than the depth where the maximum salinity occurs (~150–200 m). This distinctive salinity layer is the result of surface Ekman transport of fresh water from the south and subsurface advection of high-salinity water from the north. Two configurations of the Community Earth System Model (CESM) ocean-ice forced hindcast experiments—one with 1° and the other with 0.1° horizontal resolution (Parallel Ocean Program low and high resolutions [POP-LR and POP-HR], respectively)—are compared with the Argo data for 2005–2009. POP-LR has a shallow MLD bias common to many Fifth Coupled Models Intercomparison Project (CMIP5) models, while POP-HR has a mix of deep and shallow MLD biases. While both models were able to replicate the large-scale processes leading to formation of a high-salinity layer, the salinity feature in POP-HR is too strong and deep. Neither model was able to replicate the vertical mixing processes leading to penetration of the subsurface salt maximum.

54 ENVIRONMENTAL SCIENCES↗

Influence of Microbial Membranes on Biofilm Formation, Scaling Reactions, and Production Chemistry in Engineered Energy Systems (Final Report)

Humans are engineering the deep subsurface for the purposes of energy-capture, energy-storage, and environmental mitigation. Despite the potential for microbial communities to significantly alter the effectiveness of these technologies, we have historically lacked a clear understanding of how microbial cells interact in a fractured shale system. Existing knowledge has been heavily based on genomic information, lacking studies on in situ physiologies, kinetic rates, and attachment mechanisms governing biogeochemical reactions in the system. The overarching goal of this research was to advance understanding of engineered hydrocarbon extraction systems as they evolve from newly developed environments to mature use. Plasma membranes protect microbial cells, mediate many critical functions, and respond to intracellular cues and ecological perturbations through physicochemical modifications. The project objectives were to 1) characterize variables influencing growth and membrane features of shale taxa, 2) characterize the interactions between shale matrices and microorganisms and 3) elucidate engineered and environmental processes driving biogeochemical signatures at the field scale. Objectives were realized through laboratory experiments involving growth of pure cultures and enrichments in continuous culture and biofilms; access to samples from two DOE-NETL funded energy-capture sites: Marcellus Shale Energy and Environmental Laboratory (MSEEL and MSEEL II); and through collaborations with scientists and engineers at the Environmental Molecular Science Laboratory (EMSL) and National Energy Technology Laboratory (NETL). Key findings showed (a) Halanaerobium congolense WG10 makes its membrane more fluid and thicker through increasing its polyunsaturated fatty acid (PUFA) composition under non-optimal salinities (7% and 20%) compared to the optimum (13% NaCl); (b) anionic phospholipids within the plasma membrane are important for high salinity tolerance in H. congolense WG10 while zwitterionic species modulate biofilm physiologies in both isolate and mixed cultures, and (c) tyrosine accumulation with overexpression of Na+/H+ antiporters are essential for osmoprotection in H. congolense WG10 under high salinity while upregulation of aromatic amino acid synthesis and cell envelope maintenance underpin biofilm formation. It is clear from these results that microbial persistence in fractured shale reservoirs under environmental and engineered perturbations requires strategic plasma membrane lipid chemistry adjustments and metabolic restructuring, with implications for improved shale microbiology management and more efficient hydrocarbon extraction approaches targeting microorganisms.

03 NATURAL GAS↗

The Dielectric Constant at P-Band for Salinity from 0 to 150 pss

Measurements have been made at P-band (0.707 GHz) to construct a model for the dielectric constant of sea water and extend the model for the dielectric constant to high salinity (50-150 pss). The measurements are part of research to develop a model for the dielectric constant suitable for future wide-bandwidth remote sensing of salinity and for application to water bodies such as the Great Salt Lake with salinity significantly above that found in the open ocean. Measurements have been made at temperatures from 2 to 30 °C and salinity from 0 to 138 pss. The data have been fit to a Debye model for the dielectric constant with a single resonance as has been employed at L-band (1.413 GHz) where remote sensing of salinity is currently done. Comparison with contemporary models developed from data at L-band indicates that the L-band model and new P-band model do well at both frequencies for salinity less than 50 pss but at higher values of salinity the L-band models diverge from the data. The data has also been used to test at high salinity the mathematical relationship between salinity and conductivity which is the basis for the practical salinity scale (pss).

Dielectric Constant↗

Factors influencing water quality in surface water and alluvial groundwaters downgradient of a reclaimed surface coal mine in the Powder River Basin of southeastern Montana, USA

Abstract Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Keeshin, Skye I. (ORCID:0009000986449872)↗

Drying model of a high salt content cementitious waste form: Effect of capillary forces and salt solution

Highlights: • Drying model for a high salt content cementitious waste form is developed. • Water vapor diffusion and capillary liquid flow are distinguished. • Capillary and salt solution effects are considered in vapor-liquid equilibrium. A water transport model coupling capillary liquid flow with vapor diffusion is developed to describe the drying process for a cementitious waste form with high salinity porewater. Vapor-liquid equilibrium is formulated as the driving force for vapor diffusion and the model accounts for pore capillary and high salinity effects on water thermodynamic activity. Pore filling and porewater surface tension as a function of pore size distribution and water saturation have been quantified for the material. Geochemical speciation modeling is used to simulate porewater activity as a function of composition over the range of saturation. The theoretical relationship between relative humidity and water saturation generally agrees with experimental measurement, and the developed model is capable of predicting drying rates under various external relative humidity conditions. The model was developed to be incorporated into reactive transport models considering the effects of drying such as salt redistribution and efflorescence.

36 MATERIALS SCIENCE↗

Advanced Mineral Separations with Novel Simulated Moving Beds

Lithium is a critical mineral that is widely used in batteries and energy storage applications, making it increasingly important in the next few decades. To meet the growing demand for lithium and secure domestic supply chains, there is a need to exploit unconventional lithium resources. However, utilizing current lithium extraction processes is challenging due to the high salinity in those resources. Thus, it is essential to develop energy-efficient, and less chemical-intensive separation processes that can exploit high-salinity lithium resources. Accordingly, this project aims to design a novel zwitterionic stationary phase and use it to develop a continuous chromatography process to recover LiCl minerals from traditionally unexploited domestic saline resources. The developed zwitterionic stationary phase allows fractionating minerals based on their different sorbent affinities under water elution. A systematically designed continuous process can separate lithium from other minerals, reducing the risk of material fouling and the overall chemical consumption to produce battery-grade lithium. This approach is expected to significantly enhance the efficiency and sustainability of the lithium extraction process while also reducing the environmental impact associated with traditional processes. At the end of the project, the technology will be demonstrated in continuous mode using a simulated moving bed (SMB) to recover >100 g of LiCl from real resource waters. The U.S.-based resources that this project targets for LiCl recovery are formation water, oil-produced water, and geothermal brines, supplied by Standard Lithium Ltd. and Shell Inc, respectively.

critical minerals↗

Incorporation of salinity, nitrogen, and shading stress factors into the Huesemann Algae Biomass Growth model

The Huesemann Algae Biomass Growth (HABG) model predicts microalgae biomass growth in outdoor raceways as a function of water temperature and incident light intensity. The model over-predicted growth in several Regional Algal Feedstock Testbed (RAFT) experiments. Inspection of the culture conditions suggested that salinity stress, nutrient limitation, and shading reduced growth, which were not included in the original model. Laboratory experiments were carried out to measure growth response of S. obliquus to high salinity and limited nitrogen. In addition, the shading effect was estimated based on raceway geometry, solar angle, albedo and measured light intensity data. In this study, the improvement of model performance is presented step by step as each growth limiting factor is incorporated into the model. The new salinity, shanding, and nutrient stress factors remove most of the over-prediction of the original model. Comparison of the model with observed data indicated that ignoring the lag phase also resulted in overprediction. Delaying the start of the simulation until the end of the lag phase and inclusion of stress factors lowered model inaccuracy from 90% over-prediction to within ±10% in six out of seven batches.

09 BIOMASS FUELS↗