Search NASA⌕ Search

SEARCH · Search NASA

Results for “Homogeneous flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Macroscopic thermoplastic model applied to the high pressure torsion of metallic glasses

Shear deformation generated temperature rise in metallic glasses is estimated in a macroscopic three-dimensional axial symmetric thermoplastic model. Numerical solution of heat-conduction equation provides the time evolution and spatial distribution of temperature for high pressure torsion in the present paper. We have shown that small sample thickness and/or high deformation rate enables the temperature to exceed the glass transition in the entire sample, yielding a transition of the deformation mode from inhomogeneous to homogeneous viscous flow. However, in other cases only a small temperature increase is predicted in line with literature data.

36 MATERIALS SCIENCE↗

Current oscillations as a manifestation of spatio-temporal inhomogeneity of temperature distribution in vanadium dioxide films at semiconductor-metal phase transition

A spatial temperature distribution in VO{sub 2} film was first investigated at current oscillations using infrared microscope. The oscillations are revealed to arise from the periodic formation and disappearance of a narrow high-temperature channel in VO{sub 2} film. The nature of the oscillations in VO{sub 2} films is considered from the standpoint of a well-known phenomenon: spatio-temporal instability of current flow in homogeneous semiconductors. The temperature of the channel significantly exceeds the semiconductor-metal transition temperature being the cause of film destruction and oscillations cessation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of the electrical contact resistance at rough interfaces using two dimensional materials

Reducing the electronic contact resistance at the interfaces of nanostructured materials is a major goal for many kinds of planar and three dimensional devices. In this work, we develop a method to enhance the electronic transport at rough interfaces by inserting a two dimensional flexible and conductive graphene sheet. We observe that an ultra-thin graphene layer with a thickness of 0.35 nm can remarkably reduce the roughness of a sample in a factor of 40%, avoiding the use of thick coatings, leading to a more homogeneous current flow, and extraordinarily increasing the total current compared to the graphene-free counterpart. Due to its simplicity and performance enhancement, this methodology can be of interest to many interface and device designers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic phases, clustering, and chain formation for driven disk systems in the presence of quenched disorder

In this paper, we numerically examine the dynamic phases and pattern formation of two-dimensional monodisperse repulsive disks driven over random quenched disorder. We show that there is a series of distinct dynamic regimes as a function of increasing drive, including a clogged or pile-up phase near depinning, a homogeneous disordered flow state, and a dynamically phase separated regime consisting of high-density crystalline regions surrounded by a low density of disordered disks. At the highest drives the disks arrange into one-dimensional moving chains. The phase separated regime has parallels with the phase separation observed in active matter systems, but arises from a distinct mechanism consisting of the combination of nonequilibrium fluctuations with density-dependent mobility. We discuss the pronounced differences between this system and previous studies of driven particles with longer-range repulsive interactions moving over random substrates, such as superconducting vortices or electron crystals, where dynamical phase separation and distinct one-dimensional moving chains are not observed. Finally, our results should be generic to a broad class of systems in which the particle-particle interactions are short ranged, such as sterically interacting colloids or Yukawa particles with strong screening driven over random pinning arrays, superconducting vortices in the limit of small penetration depths, or quasi-two-dimensional granular matter flowing over rough landscapes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimizing thermal stability and mechanical behavior in segregation-engineered nanocrystalline Al–Ni–Ce alloys: A combinatorial study

The deliberate use of solute enrichment at grain boundaries, otherwise known as segregation engineering, is a promising approach to tailor the properties of interface-dominated materials such as nanocrystalline alloys. Here, the ensuing chemical and structural evolution at grain boundaries can give rise to thermal stability and excellent mechanical properties, but the interplay between enrichment, phase decomposition, grain growth, and mechanical behavior exists in a vast composition and processing space. In this study, a combinatorial synthesis and rapid characterization approach was applied to segregation-engineered nanocrystalline Al–Ni–Ce alloys to assess the evolution of microstructure and resulting mechanical behavior as functions of alloying content and annealing conditions. In addition to the identification of alloys and processing conditions that give rise to exceptional thermal stability, strength retention, and homogeneous plastic flow, we construct combined thermal stability and deformation mechanism maps that demarcate several important regimes of behavior.

36 MATERIALS SCIENCE↗

Evaluation of idealized large-eddy simulations performed with the Weather Research and Forecasting model using turbulence measurements from a 250 m meteorological mast

Abstract. We investigate the ability of the Weather Research and Forecasting model to perform large-eddy simulation of canonical flows. This is achieved through comparison of the simulation outputs with measurements from sonic anemometers on a 250 m meteorological mast located at Østerild, in northern Denmark. Østerild is on a flat and rough area, and for the predominant wind directions, the atmospheric flow can be considered to be close to homogeneous. The idealized simulated flows aim at representing atmospheric boundary layer turbulence under unstable, neutral, and stable stability conditions at the surface, which are statistically significant conditions observed at Østerild. We found that the resolved fields from the simulations appear to have the characteristics of the three stability regimes. Vertical profiles of observed mean wind speeds and direction are well reproduced by the simulations, with the largest differences under near-neutral conditions, where the effect of the subgrid-scale model is evident on the vertical wind shear close to the surface. Vertical profiles of observed eddy fluxes are also well reproduced by the simulations, with the largest differences for the three velocity component variances under stable stability conditions, although nearly always within the observed variability. With regards to turbulent kinetic energy, we find good agreement between observations and simulations at all vertical levels. Simulated and observed velocity spectra match very well and show very similar behavior with height and with atmospheric stability within the low-frequency interval; at the effective resolution, the simulated spectra show the typical drop-off of finite differences. Our findings demonstrate that these idealized simulations reproduce the characteristics of atmospheric stability regimes often observed at a high turbulent and flat site within a direction sector, where the air flows over nearly homogeneous land.

17 WIND ENERGY↗

Simulation of Boiling Flow in a Helical Coil Using a Homogeneous Equilibrium Model with the Nek-2P CFD Code

Recent developments in the field of nuclear energy have lead to an increased interest in the design of helically coiled steam generators. In particular, their compact size, and high heat transfer rates make them ideal for small modular reactors. This has lead to a renewed effort to investigate the characteristics of fluid flow and heat transfer in and around helical coils both numerically and experimentally. The focus of this work is on the development of a consistent modeling, formulation, and simulation framework for boiling flows in helical coils using the highly scalable Nek-2P CFD code. As a first step, two phase flow is accounted for using a homogeneous equilibrium model. Results for both single and multiphase flows are compared to results obtained from Star-CCM+. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Turbulence statistics in a spectral element code: a toolbox for High-Fidelity Simulations

In the present document we describe a toolbox for the spectral-element code Nek5000, aimed at computing turbulence statistics. The toolbox is presented for a small test case, namely a square duct with L x = 2h, L y = 2h and L z = 4h, where x, y and z are the horizontal, vertical and streamwise directions, respectively. The number of elements in the xy-plane is 16 X 16 = 256, and the number of elements in z is 4, leading to a total of 1,204 spectral elements. A polynomial order of N = 5 is chosen, and the mesh is generated using the Nek5000 tool genbox. The toolbox presented here allows to compute mean-velocity components, the Reynolds-stress tensor as well as turbulent kinetic energy (TKE) and Reynolds-stress budgets. Note that the present toolbox allows to compute turbulence statistics in turbulent flows with one homogeneous direction (where the statistics are based on time-averaging as well as averaging in the homogeneous direction), as well as in fully three-dimensional flows (with no periodic directions, where only time-averaging is considered).

97 MATHEMATICS AND COMPUTING↗

Experimental and numerical analysis of parallel reactant flow and transverse mixing with mineral precipitation in homogeneous and heterogeneous porous media

Formation of mineral precipitates in the mixing interface between two reactant solutions flowing in parallel in porous media is governed by reactant mixing by diffusion and dispersion and is coupled to changes in porosity/permeability due to precipitation. The spatial and temporal distribution of mixing-dependent precipitation of barium sulfate in porous media was investigated with side-by-side injection of barium chloride and sodium sulfate solutions in thin rectangular flow cells packed with quartz sand. The results for homogeneous sand beds were compared to beds with higher or lower permeability inclusions positioned in the path of the mixing zone. In the homogeneous and high permeability inclusion experiments, BaSO 4 precipitate (barite) formed in a narrow deposit along the length and in the center of the solution–solution mixing zone even though dispersion was enhanced within, and downstream of, the high permeability inclusion. In the low permeability inclusion experiment, the deflected BaSO 4 precipitation zone broadened around one side and downstream of the inclusion and was observed to migrate laterally toward the sulfate solution. A continuum-scale fully coupled reactive transport model that simultaneously solves the nonlinear governing equations for fluid flow, transport of reactants and geochemical reactions was used to simulate the experiments and provide insight into mechanisms underlying the experimental observations. Lastly, migration of the precipitation zone in the low permeability inclusion experiment could be explained by the coupling effects among fluid flow, reactant transport and localized mineral precipitation reaction.

54 ENVIRONMENTAL SCIENCES↗

An approach for drag correction based on the local heterogeneity for gas-solid flows

The drag models typically used for gas-solids interaction are mainly developed based on homogeneous systems of flow passing fixed particle assembly. It has been shown that the heterogeneous structures, i.e., clusters and bubbles in fluidized beds, need to be resolved to account for their effect in the numerical simulations. Since the heterogeneity is essentially captured through the local concentration gradient in the computational cells, this study proposes a simple approach to account for the non-uniformity of solids spatial distribution inside a computational cell and its effect on the interaction between gas and solid phases. Finally, to validate this approach, the predicted drag coefficient has been compared to the results from direct numerical simulations. In addition, the need to account for this type of heterogeneity is discussed for a periodic riser flow simulation with highly resolved numerical grids and the impact of the proposed correction for drag is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tilted lidar profiling: Development and testing of a novel scanning strategy for inhomogeneous flows

The most common profiling techniques for the atmospheric boundary layer based on a monostatic Doppler wind lidar rely on the assumption of horizontal homogeneity of the flow. This assumption breaks down in the presence of either natural or human-made obstructions that can generate significant flow distortions. The need to deploy ground-based lidars near operating wind turbines for the American WAKE experimeNt (AWAKEN) spurred a search for novel profiling techniques that could avoid the influence of the flow modifications caused by the wind farms. With this goal in mind, two well-established profiling scanning strategies have been retrofitted to scan in a tilted fashion and steer the beams away from the more severely inhomogeneous region of the flow. Results from a field test at the National Renewable Energy Laboratory's 135-m meteorological tower show that the accuracy of the horizontal mean flow reconstruction is insensitive to the tilt of the scan, although higher-order wind statistics are severely deteriorated at extreme tilts mainly due to geometrical error amplification. A numerical study of the AWAKEN domain based on the Weather Research and Forecasting Model and large-eddy simulation are also conducted to test the effectiveness of tilted profiling. It is shown that a threefold reduction of the error on inflow mean wind speed can be achieved for a lidar placed at the base of the turbine using tilted profiling.

17 WIND ENERGY↗

Calculation of Permeability for Porous Media with Platy Grains - 18095

The permeability is calculated numerically for a porous medium with granules of platy shape when pressure gradient is imposed externally across the medium by considering slow flow of a viscous fluid in the pores. Under the assumption of periodicity a unit cell which contains solid phase of platy granules is selected on the microscale and the flow field is calculated by solving Stokes problem in which inertial effects are ignored. A Boundary-Vale Problem is obtained in the course of applying the theory of homogenization to fluid flow through porous media. It is shown that the permeability is strongly influenced by the flow direction along which the pressure gradient on the macro-scale is imposed and the particle arrangement pattern in the unit cell used in the numerical computation. (authors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of molten salt inflow on the temperature distribution in thermal energy storage tanks at startup for central receiver concentrating solar power plants

Concentrating Solar Power (CSP) systems with molten salt thermal energy storage (TES) tanks are one of the most promising, renewable-based energy conversion technologies for larger-scale power generation. The TES tank is one of the most critical components in CSP plants due to its high-temperature operation (up to 565 °C), daily thermal cycling, and intermittent solar radiation conditions. The plant startup is one of the most challenging operation conditions that could lead to damaging thermal gradients due to low salt inventory levels. In this study an analytical model for the sparger ring was developed and integrated with a detailed computational fluid dynamics model of a commercial-scaled molten salt tank. The integrated model allows an accurate representation of the tank operation to evaluate the effect of molten salt inflow on the mixing process. The tank filling process during plant startup was analyzed considering sparger rings with variations in design features, including inlet orifice configurations, number of orifices, direction of the inlets, and orifice diameter. The results demonstrated that higher temperature gradients are obtained in the tank floor during the plant startup. A sparger ring configuration with a predetermined orifice inlet inclination (30°, 45° and 60°) leads to significant temperature differences in the floor, between 57 °C and 62 °C, but better homogeneity in the temperature of the salt inventory. Lower salt inflow velocities result in a more homogeneous floor temperature, with maximum temperature differences under 38 °C. The sparger ring configuration with 52 orifices of 1-in. diameter and vertical flow showed better homogeneity in the temperature differences as a function of the salt level and lower temperature gradients in the tank floor. Because large temperature gradients in the tank's floor have been identified as one of the main factors contributing to tank failures, assessing various sparger ring design features is fundamental to determining proper inflow conditions that lead to low-temperature gradients and reducing failure susceptibility.

14 SOLAR ENERGY↗

In-situ synchrotron X-ray diffraction study of dual-step strain variation in laser shock peened metallic glasses

Atomic-structure evolution is significant in understanding the deformation mechanism of metallic glasses. Here, we firstly find a dual-step atomic strain variation in laser-shock-peened (LSPed) metallic glasses during compression tests by using in-situ synchrotron X-ray diffraction. Under low compressive load, LSP-deformed zone’s atomic-structure shows low Young’s Modulus (E); with load increase, atomic-structure are re-hardened, showing high E. An atomic deformation mechanism is proposed by using flow unit model, that LSP could induce interconnected flow units and 2 homogenize the atomic-structure. Furthermore, these interconnected flow units are metastable and start to annihilate during compressive loading, causing the dual-step atomic strain variation.

36 MATERIALS SCIENCE↗

Experimental platform for the investigation of magnetized-reverse-shock dynamics in the context of POLAR

The influence of a strong external magnetic field on the collimation of a high Mach number plasma flow and its collision with a solid obstacle is investigated experimentally and numerically. The laser irradiation ( $I\sim 2\times 10^{14}~\text{W}\cdot \text{cm}^{-2}$ ) of a multilayer target generates a shock wave that produces a rear side plasma expanding flow. Immersed in a homogeneous 10 T external magnetic field, this plasma flow propagates in vacuum and impacts an obstacle located a few mm from the main target. A reverse shock is then formed with typical velocities of the order of 15–20 $\pm$ 5 km/s. The experimental results are compared with 2D radiative magnetohydrodynamic simulations using the FLASH code. This platform allows investigating the dynamics of reverse shock, mimicking the processes occurring in a cataclysmic variable of polar type.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

3-D Unsteady Model for Be-Steam Reaction in Water-Cooled Ceramic Breeder Blanket

Here, the design of the water-cooled ceramic breeder (WCCB) blanket includes beryllium multiplier layers. At elevated temperature, beryllium reacts with steam in an exothermic reaction producing beryllium oxide and hydrogen. Such situation may occur in WCCB in the case of the rupture of one of the cooling pipes in the blanket module. This process occurs locally in a complex 3-D geometry of the blanket containing several different granular levels and a network of cooling pipes and structural supports. The process is also inherently unsteady since reaction rate depends on concentration of steam and pure beryllium which changes in time. In order to perform the detailed analysis of the process, the model of the reacting flowthrough porous media was developed and introduced into 3-D computational fluid dynamics code. In this model, granular beds are introduced as porous solids simplifying the model geometry and reducing typical mesh size to manageable amount of tens of millions of elements. A reaction rate between solid beryllium and steam is obtained from experimental results, and depends on temperature and concentration of the reactants. The differential equation for beryllium oxide fraction is introduced, allowing obtaining distributions of beryllium oxide in space and time. Multicomponent flow consisting of a homogenous mixture of steam and hydrogen is considered flowing through the porous solid with variable properties. Sink and source terms for steam and hydrogen fractions are determined by local beryllium oxide mass fraction source according to the molar ratios of beryllium steam reaction. The conjugated heat transfer approach is applied to calculate heat transfer in support structures as well as coolant flow, simultaneously with the porous medium steam flow in a blanket's granular beds. The model is validated using experimental data on beryllium steam reaction for granular bed samples.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗