Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf{sub 2}N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 {mu}mol/m{sup 2} at 300 K. For [bmim][Tf{sub 2}N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are {+-}0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf{sub 2}N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

36 MATERIALS SCIENCE↗

Polymer electrolyte based on crosslinked poly(glycidyl methacrylate) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Polymer electrolytes based on crosslinked poly(glycidyl methacrylate) as polymer host and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) as incorporated salt were prepared by in-situ photopolymerization technique. The complexes with different mass ratio of glycidyl methacrylate (GMA) monomer to BmimTFSI were investigated. The ionic conductivity of the polymer electrolyte was increased and reach the highest value of 7.50 × 10{sup −4} S cm{sup −1} at the ratio of 3:7 (GMA: BmimTFSI). The interaction between the polymer host and ionic liquid was proved by Attenuated Total Reflectance-Fourier Transformation Infra-Red Spectroscopy (ATR-FTIR). Meanwhile, the X-ray diffraction analysis shows the amorphousity of the polymer electrolyte film increase with the ionic liquid ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Terminal and Super‐Basic Parent Imides of Hafnium

Abstract A dinuclear hafnium complex containing the parent imido ligand [(PN)(PNC)Hf=NH{μ 2 ‐K}] 2 ( 2 ) (PN − =(N‐(2‐P i Pr 2 ‐4‐methylphenyl)‐2,4,6‐Me 3 C 6 H 2 ; PNC 2− =(N‐(2‐P i Pr 2 ‐4‐methylphenyl)‐2,4,6‐CH 2 Me 2 C 6 H 2 ), was prepared by reduction of the bisazide trans‐[(PN) 2 Hf(N 3 ) 2 ] ( 1 ) with two equiv of KC 8 . Encapsulation of K + in 2 with crown‐ether or cryptand affords the first discrete salt [K(encap)][(PN)(PNC)Hf≡NH] (encap=18‐crown‐6(THF) 2 , 3 ; 2,2,2‐Kryptofix, 4 ), featuring a terminal parent imide and possessing some of the shortest Hf−N bond lengths known to date. DFT calculations revealed formation of 2 to proceed via an extremely basic monomeric nitrido, [(PN) 2 Hf≡N] − ( A ), having a computed p K BH+ of ∼57 followed by heterolytic splitting of an inert 1,2‐CH bond of a benzylic methyl group across the Hf≡N triple bond in A . An electronic structure analysis reveals A to possess a covalent Hf≡N triple bond and of super‐basic character. We also showcase reactivity of the Hf≡NH bond with various electrophiles.

Chemistry↗

An Eco-friendly Porous Poly(imide-ether)s for the Efficient Removal of Methylene Blue: Adsorption Kinetics, Isotherm, Thermodynamics and Reuse Performances

Poly(imide-ether)s (PIEs), which is porous in nature, was synthesized using aromatic diamines and dianhydrides via the solution polycondenzation reaction. In the process, PIEs was used as an adsorbent for the removal of basic dye [Methylene blue (MB)] from the aqueous solution. The structure and the thermal stability of PIEs were characterized by FT-IR, {sup 1}H-NMR, XRD and TG analysis, and the adsorption behaviour of the PIEs was confirmed using UV/Visible, FT-IR and SEM with EDX analysis. Batch adsorption experiments were carried out and their parameters (pH 6.95), initial MB concentration (200 mg/L), adsorbent dosage (50 mg), contact time (120 min) and temperature (28 °C) were optimized. The batch adsorption experimental data of the effect of contact time, initial MB concentration and temperature were evaluated using the adsorption kinetics (Pseudo-first order, Pseudo-second order, Elovich and Intra-particle diffusion kinetic), isotherm (Langmuir, Freundlich, Redlich–Peterson and Sips isotherms) and thermodynamic models respectively. In the study, adsorption of MB onto PIEs followed Pseudo-second kinetics and found to be the best fitting model based on the obtained experimental data. The homogeneity and heterogeneity surface nature of PIEs were elucidated with two and three isotherm parameters respectively. The adsorption thermodynamic study indicates that the adsorption of MB onto PIEs was endothermic and spontaneous in nature. The adsorbed PIEs solid waste was utilized to prepare the polymer composite, and its property was characterized. Graphical Abstract: .

54 ENVIRONMENTAL SCIENCES↗

Designing difluoro substituted benzene ring based fullerene free acceptors for small Naphthalene Di-Imide based molecules with DFT approaches

Herein current research work, we designed four new acceptor materials for small solar cell molecules with Naphthalene Di-Imide central unit by employing the wB97xd/6-31 G (d,p) and TD-wB97xd/6-31 G (d,p) level of density functional theories. Absorption properties of designed materials are excellent between the 400 nm to 510 nm with chloroform solvent and 340 nm to 490 nm in gas phase, small reorganization energy values 0.0163–0.0172 eV for electron (λ{sub e}) and 0.0205–0.0257 eV for hole transfer (λ{sub h}), large expected open circuit voltages (V{sub oc}) from 3.60 to 4.53 eV with respect to [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM), high dipole moment strength ranging from 4.0199 to 8.9647 Debye in excited state and 3.3847 Debye to 7.2632 Debye in ground state which are very helpful for the further construction of organic solar cell (OSC) devices with improved and better power conversion efficiencies (PCEs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How mixing tetraglyme with the ionic liquid 1- n -hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide changes volumetric and transport properties: An experimental and computational study

The viscosity and density of the ionic liquid (IL) 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C 6 mim][NTf 2 ]), the molecular solvent tetraethylene glycol dimethyl ether (tetraglyme or G4) and their binary mixtures were measured experimentally as a function of temperature. The same systems were also studied using classical molecular dynamics (MD) simulations. The viscosities of the [C 6 mim][NTf 2 ]/G4 mixtures decrease with increasing G4 concentration, though not as much as an ideal mixing model would predict. Detailed analysis of the MD results reveals that G4 preferentially solvates cations, leading to a reduction in the interaction energy between cations and anions and a subsequent enhancement in anion mobility. A similar effect has been reported when glymes are mixed with salts containing alkali metal cations, with the resulting mixtures being called “solvate” ionic liquids. The simulations predict that the ionic conductivity will be maximized when the G4 mole fraction is around 10–20%. The ability of G4 to effectively solvate the cations stems from localized charges on the oxygen. In conclusion, the simulations predict that solvents having large localized positive charges would preferentially solvate anions, leading to enhanced cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extraction chromatography of 225 Ac and lanthanides on N,N-dioctyldiglycolamic acid /1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvent impregnated resin

The alpha-emitter 225 Ac (t 1/2 = 9.92 d) is currently under development for targeted alpha-particle therapy of cancer, and accelerator production of 225 Ac via proton irradiation of thorium targets requires robust separations of 225 Ac from chemically similar fission product lanthanides. Additionally, the lanthanide elements represent critical components in modern technologies, and radiolanthanides such as 140 Nd (t 1/2 = 3.37 d) also have potential application in the field of nuclear medicine. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf 2 ]), combined with the diglycolamide extractant, N,N-dioctyldiglycolamic acid (DODGAA), was adsorbed on macroporous resin support to produce a solvent impregnated resin (SIR) that was investigated for separations of 225 Ac and lanthanides. The equilibrium distribution coefficients (Kd) of the rare earth elements (Sc(III), Y(III), Ln(III)), 225 Ac(III), Th(IV), and U(VI) on the prepared DODGAA/[Bmim][NTf 2 ]-SIR were determined from batch adsorption experiments in HCl and HNO 3 media. The DODGAA/[Bmim][NTf2]-SIR exhibited preferential uptake of the heavier lanthanide elements while allowing for the separation of the lighter lanthanides. Column separations utilizing the DODGAA/[Bmim][NTf 2 ]-SIR were effective at separating the lighter lanthanides from each other, and separating 225 Ac from a mixture of lanthanides, 213 Bi, and 225 Ra without the need for additional complexing agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A convenient strategy to functionalize carbon nanotubes with ascorbic acid and its effect on the physical and thermomechanical properties of poly(amide–imide) composites

Multi-walled carbon nanotubes (MWCNTs) were functionalized by ascorbic acid by a fast strategy under microwave irradiation to improve interfacial interactions and dispersion of CNTs in a poly(amide–imide) (PAI) matrix. This technique provides a rapid and economically viable route to produce covalently functionalized CNTs. The as-prepared, new type of functionalized CNTs were analyzed by several techniques. The thermal stabilities and mechanical interfacial properties of CNT/PAI composites were investigated using several techniques. The dispersion state of CNTs in the PAI matrix was observed by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The mechanical interfacial property of the composites was significantly increased by the addition of ascorbic acid treated CNTs. The FE-SEM and TEM results showed that the separation and uniform dispersion of CNTs in the PAI matrix. The overview of these recent results is presented. -- Graphical abstract: Presentation of possible interactions of hydrogen bonding between the MWCNT-AS and the PAI chains. Highlights: • Surface functionalization of MWCNTs with ascorbic acid under microwave irradiation. • The MWCNT-AS/PAI composite films were fabricated by solution blending process. • Microstructure and MWCNT states in the composites were studied. • Thermal and mechanical properties of the composite films were evaluated. • Films of different contents of the MWCNTs-AS showed a superior tensile behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The use of novel biodegradable, optically active and nanostructured poly(amide-ester-imide) as a polymer matrix for preparation of modified ZnO based bionanocomposites

Highlights: Black-Right-Pointing-Pointer A novel biodegradable and nanostructured PAEI based on two amino acids, was synthesized. Black-Right-Pointing-Pointer ZnO nanoparticles were modified via two different silane coupling agents. Black-Right-Pointing-Pointer PAEI/modified ZnO BNCs were synthesized through ultrasound irradiation. Black-Right-Pointing-Pointer ZnO particles were dispersed homogeneously in PAEI matrix on nanoscale. Black-Right-Pointing-Pointer The effect of ZnO nanoparticles on the properties of synthesized polymer was examined. -- Abstract: A novel biodegradable and nanostructured poly(amide-ester-imide) (PAEI) based on two different amino acids, was synthesized via direct polycondensation of biodegradable N,N Prime -bis[2-(methyl-3-(4-hydroxyphenyl)propanoate)]isophthaldiamide and N,N Prime -(pyromellitoyl)-bis-L-phenylalanine diacid. The resulting polymer was characterized by FT-IR, {sup 1}H NMR, specific rotation, elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) analysis. The synthesized polymer showed good thermal stability with nano and sphere structure. Then PAEI/ZnO bionanocomposites (BNCs) were fabricated via interaction of pure PAEI and ZnO nanoparticles. The surface of ZnO was modified with two different silane coupling agents. PAEI/ZnO BNCs were studied and characterized by FT-IR, XRD, UV/vis, FE-SEM and TEM. The TEM and FE-SEM results indicated that the nanoparticles were dispersed homogeneously in PAEI matrix on nanoscale. Furthermore the effect of ZnO nanoparticle on the thermal stability of the polymer was investigated with TGA and DSC technique.

36 MATERIALS SCIENCE↗

Relationship of the Molecular Structure and Transport Properties of Imide-Based Lithium Salts of “Acetonitrile/Water-in-Salt” Electrolytes

“Water-in-salt” (WIS) electrolytes exhibit excellent safety and electrochemical performance. However, they possess high concentrations, relatively low diffusion coefficient, and high viscosity. “Acetonitrile/water in salt” (AWIS) electrolytes can overcome the disadvantages of WIS electrolytes. Under relatively low concentrations, AWIS electrolytes show good electrochemical performance comparable to WIS electrolytes and low conductivity. Herein, we investigate the relationship between the solvation structures and the transport properties using small-angle X-ray scattering and molecular dynamics simulation. We observed two solvation behaviors of AWIS: anions dissolved in acetonitrile forming small acetonitrile/anion clusters and additional water further dissolving the small acetonitrile/anion clusters. The introduction of acetonitrile weakens the water–solute interaction and enhances the cation–anion interaction, which results in an enhanced dynamical slowdown as the concentration increases. In conclusion, this work provides molecular-level understanding of the connection between two-stage solvation structures and transport properties for imide-based lithium salt solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport and Morphology of a Proton Exchange Membrane Based on a Doubly Functionalized Perfluorosulfonic Imide Side Chain Perflourinated Polymer

There is a critical need for higher performing proton exchange membranes for electrochemical energy conversion devices that would enable higher temperature and drier operating conditions to be utilized. A novel approach is to utilize multiacid side chains in a perfluorinated polymer, maintaining the mechanical properties of the material, while dramatically increasing the ion-exchange capacity; however, as we show in this paper, the more complex side chain gives rise to unexpected physical phenomena in the material. In this work we have thoroughly investigated a doubly functionalized perfluorosulfonic imide acid side chain perfluorinated polymer (PFIA), the simplest of many possible multiacid side chains currently being developed. The material is compared to its simpler perfluorosulfonic acid (PFSA) analogue via a battery of characterization and modeling investigations. The doubly functional side chain profoundly influences the properties of the PFIA polymer as it gives rise to both inter- and intraside chain interactions. These affect the nature of thermal decomposition of the material but, more importantly, force the backbone of the polymer into an unusually highly ordered more crystalline configuration. Under water saturated conditions, the PFIA has the same proton conductivity as the PFSA material, indicating that the additional proton does not contribute to the ionic conductivity, but the PFIA shows higher proton conductivity at lower RH conditions owing to dynamic changes in its local molecular environment. A transition is observed between 30 and 60 °C, indicating an order/disorder transition that is not present in the PFSA analogue. The mechanism of proton transport in the PFIA is due to more delocalized protons and more flexible side chains with better-dispersed, smaller water clusters forming the hydrophilic domains than in the PFSA analogue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying the Lewis Acidity of Mono-, Di-, and Trivalent Cations in Anhydrous Bis(trifluoromethylsulfonyl)imide Salts

While the bis(trifluoromethylsulfonyl)imide anion (TFSI – ; formula [N(SO 2 CF 3 ) 2 ] – ) has been noted for its practical utility, the use of TFSI – salts as sources of Lewis acidic metal cations for studies of cation-driven tuning effects has not been reported. Here, the effective Lewis acidity of mono-, di-, and trivalent cations (namely, K + , Na + , Li + , Ba 2+ , Ca 2+ , Mg 2+ , Zn 2+ , La 3+ , Y 3+ , Lu 3+ , and Sc 3+ ) in the form of their TFSI – salts is described, along with quantitative comparisons to salts of several other weakly coordinating anions (namely, SO 3 CF 3 – , PF 6 – , and BArF 24 – ). Triphenylphosphine oxide (TPPO) was used as a 31 P NMR probe in titration experiments for quantification of key parameters describing the effective Lewis acidity of the salts in acetonitrile (CH 3 CN) solutions. Notably, the TFSI – salts of di- and trivalent cations were found to display strong binding to TPPO with significant speciation and were found to be quite hygroscopic. Taken together, the measurements demonstrate that TFSI – salts are systematically better/stronger effective Lewis acids than their triflate analogues. And, considering the excellent solubility of TFSI – salts, these materials appear attractive for further use and development in Lewis-acidity-dependent applications, including catalysis and tuning of multimetallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Rotational Dynamics of Carbon Dioxide in 1-Alkyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide Ionic Liquids: The Effect of Chain Length

Ionic liquids (ILs) have been proposed as possible carbon dioxide (CO 2 ) carbon capture media, and so it is useful to understand the dynamics of both the dissolved gas and its IL environment as well as how altering the IL affects these dynamics. With increasing alkyl chain length, it is well established that ILs obtain a mesoscopic structural feature assigned to polarapolar segregation, and the change in structure with chain length affects dynamics. In this work, the dynamics of CO 2 in a series of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids (ILs), where alkyl is ethyl, butyl, hexyl, or decyl, were investigated using ultrafast infrared spectroscopy by measuring the reorientation and spectral diffusion of carbon dioxide in the ILs. It was found that reorientation of the carbon dioxide occurs on 3 timescales, which correspond to 2 different timescales of restricted wobbling-in-a-cone motions and a long time complete diffusive reorientation. The complete reorientation slows with increasing chain length but less than the increases in viscosity of the bulk liquids. Spectral diffusion, measured with 2D IR spectroscopy, is caused by a combination of the liquids’ structural fluctuations and reorientation of the CO 2 . The data were analyzed using recent theory that takes into account both contributions to spectral diffusion and extracts the structural spectral diffusion. Different components of the structural fluctuations have distinct dependences on the alkyl chain length. All of the dynamics are fast compared to the complete orientational randomization of the bulk ILs, as measured with optical heterodyne detected optical Kerr effect measurements. The results indicate a hierarchy of constraint releases in the liquids that give rise to increasingly slower dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bridging Atomic Solvation Environment with Electrochemical Properties for the Bis(trifluoromethylsulfonyl)imide-Based Divalent Cation Electrolytes for the Next-Generation Energy Storage Systems

A deep molecular-level understanding of the multivalent electrolyte and its correlation with the electrochemical properties is crucial for designing optimized electrolytes for next-generation rechargeable batteries. Comprehensive knowledge of the atomic level of the solvation structure and its connection with electrochemical stability and ion transport properties is especially critical. However, the interaction of these three components coupled with clear atomistic insights is lacking in the literature. Here, our current contribution evaluates representative electrolytes with the bis(trifluoromethanesulfonyl)imide (TFSI) anions for multivalent cations of Mg, Ca, and Zn, at different ionic conditions with and without a cosolvated environment in ether-based solvent. Two critical problems are investigated: first, resolving the solvation structures in the electrolyte solutions as a function of concentrations through pair distribution function analysis and the corresponding electrochemical transport properties; second, unmasking the quantitative correlation of the atomistic environment with both electrochemical kinetics and cation dependence. We discovered that the magnesium- and calcium-based electrolytes display versatile coordination lengths but poor average anodic stability due to ion pairing with TFSI - . On the contrary, the zinc-based electrolytes show the shortest solvent coordination lengths, shielding the Zn cation from rigid solvent interactions and resulting in the highest anodic stabilities. Calcium-based electrolytes exhibit the longest and most concentration-independent coordination lengths. This work provides valuable insights into the molecular structural and electrochemical features of diverse multivalent electrolyte systems with cations in various solvation environments, emphasizing the importance of the solvation structure and construction in designing high-performance electrolytes.

cation coordination↗

Activity Coefficients at Infinite Dilution of Organic Compounds in Trihexyl(tetradecyl)phophonium Bis(trifluoromethylsulfonyl)imide Using Inverse Gas Chromatography

Activity coefficients at infinite dilution of organic compounds in the ionic liquid (IL) trihexyl(tetradecyl) phosphonium bis(trifluoromethylsulfonyl)imide were determined using inverse gas chromatography at three temperatures, T ) (302.45, 322.35, and 342.45) K. Linear free energy relationship (LFER) correlations have been obtained for describing the gas-to-IL and water-to-IL partition coefficients.

Revelli, Anne-Laure↗

Electrochemical formation of bis(fluorosulfonyl)imide-derived solid-electrolyte interphase at Li-metal potential

Lithium bis(fluorosulfonyl)imide-based liquid electrolytes are promising for realizing high Coulombic efficiency and long cycle life for next-generation Li-metal batteries. However, the role of anions in the formation of solid-electrolyte interphase remains unclear. Herein, we combine electrochemical analyses and X-ray photoelectron spectroscopy measurements both with and without sample washing, together with computational simulations, to propose the reaction pathways of electrolyte decomposition and correlate the interphase component solubility with the efficacy of passivation. Additionally, we discovered that not all the products derived from interphase-forming reactions were incorporated into the resulting passivation layer, with a notable portion present in the liquid electrolyte. Further, we found that the high-performance electrolytes can afford a sufficiently passivating interphase with minimized electrolyte decomposition, by incorporating more anion-decomposition products. Overall, this work presents a systematic approach of coupling electrochemical and surface analyses to paint a comprehensive picture of solid-electrolyte interphase formation, while identifying key attributes of high-performance electrolytes for guiding future designs.

Yu, Weilai [Stanford University, CA (United States↗

Vapor pressures of 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with long alkyl chains

This work presents the vapor pressure at several temperatures for the 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide series, [C{sub N/2}C{sub N/2}im][NTf{sub 2}] (N = 14, 16, 18, and 20), measured by a Knudsen effusion method combined with a quartz crystal microbalance. The thermodynamic properties of vaporization of the ionic liquids under study are analysed together with the results obtained previously for the shorter alkyl chain length [C{sub N/2}C{sub N/2}im][NTf{sub 2}] (N = 2, 4, 6, 8, 10, and 12), in order to evaluate the effect of the alkyl side chains of the cation and to get additional insights concerning the nanostructuration of ionic liquids. The symmetry effect is explored, based on the comparison with the asymmetric imidazolium based ionic liquids, [C{sub N-1}C{sub 1}im][NTf{sub 2}]. A trend shift on the thermodynamic properties of vaporization along the alkyl side chains of the extended symmetric ionic liquids, around [C{sub 6}C{sub 6}im][NTf{sub 2}], was detected. An intensification of the odd-even effect was observed starting from [C{sub 6}C{sub 6}im][NTf{sub 2}], with higher enthalpies and entropies of vaporization for the odd numbered ionic liquids, [C{sub 7}C{sub 7}im][NTf{sub 2}] and [C{sub 9}C{sub 9}im][NTf{sub 2}]. Similar, but less pronounced, odd-even effect was found for the symmetric ionic liquids with lower alkyl side chains length, [C{sub N/2}C{sub N/2}im][NTf{sub 2}] (with N = 4, 6, 8, 10, and 12). This effect is related with the predominant orientation of the terminal methyl group of the alkyl chain to the imidazolium ring and their influence in the cation-anion interaction. The same Critical Alkyl length at the hexyl, (C{sub 6}C{sub 1}and C{sub 6}C{sub 6}) was found for both asymmetric and symmetric series indicating that the nanostructuration of the ionic liquids is related with alkyl chain length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗