Search NASA⌕ Search

SEARCH · Search NASA

Results for “INFRARED PHOTOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Public health applications of remote sensing of the environment, an evaluation

The available techniques were examined in the field of remote sensing (including aerial photography, infrared detection, radar, etc.) and applications to a number of problems in the wide field of public health determined. The specific areas of public health examined included: air pollution, water pollution, communicable disease, and the combined problems of urban growth and the effect of disasters on human communities. The assessment of the possible applications of remote sensing to these problems was made primarily by examination of the available literature in each field, and by interviews with health authorities, physicists, biologists, and other interested workers. Three types of programs employing remote sensors were outlined in the air pollution field: (1) proving ability of sensors to monitor pollutants at three levels of interest - point source, ambient levels in cities, and global patterns; (2) detection of effects of pollutants on the environment at local and global levels; and (3) routine monitoring.

Source record↗

Census cities experiment in urban change detection

The author has identified the following significant results. Computer compatible tapes for an early ERTS-1 multispectral scanner image over the San Francisco Bay area are being used to classify and analyze land use in this metropolitan region. NASA aircraft underflight data and land use maps from the Census Cities ERTS-1 experiment are providing training samples. The tape record has been reformatted for use with the LARSYSSA pattern recognition and classification algorithms developed at the Purdue University Laboratory for Applications of Remote Sensing. Trial land use classification systems are being compared with color infrared photography and ground truth data for San Jose and vicinity.

Wray, J. R.↗

Basic forest cover mapping using digitized remote sensor data and automated data processing techniques

Remote sensing equipment and automatic data processing techniques were employed as aids in the institution of improved forest resource management methods. On the basis of automatically calculated statistics derived from manually selected training samples, the feature selection processor of LARSYS selected, upon consideration of various groups of the four available spectral regions, a series of channel combinations whose automatic classification performances (for six cover types, including both deciduous and coniferous forest) were tested, analyzed, and further compared with automatic classification results obtained from digitized color infrared photography.

Coggeshall, M. E.↗

Preliminary study of Lake Pontchartrain and vicinity using remotely sensed data from the ERTS-A satellite

The author has identified the following significant results. During the summer of 1972, huge mats of duckweeds (Lemnaceae) appeared on Lake Pontchartrain, a shallow estuary in southeastern Louisiana. In color infrared photography, duckweeds show a characteristic light lavender color, unlike algal mats or water hyacinth, as observed in low level aerial photography. Although at least five species are present in the area, most water coverage is by Lemna minor and Spirodela oligorrhiza. ERTS-1 imagery shows many areas of bayous, swamps, and marginal waters of Lake Pontchartrain covered with duckweeds. Subsequent passes show a seasonal decreases in duckweeds.

Hidalgo, J. U.↗

Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

The author has identified the following significant results. The 70mm black and white infrared photography acquired in March 1973 at an approximate scale of 1:115,000 permits the identification of areas of mine subsidence not readily evident on other films. This is largely due to the high contrast rendition of water and land by this film and the excessive surface moisture conditions prevalent in the area at the time of photography. Subsided areas consist of shallow depressions which have impounded water. Patterns with a regularity indicative of the room and pillar configuration used in subsurface coal mining are evident.

Wier, C. E.↗

Evaluation of ERTS-1 imagery in mapping and managing soil and range resources in the Sand Hills Region of Nebraska

The author has identified the following significant results. Collection of ground truth data provided ground cover percent and the components of ground cover makeup. Percent bare soil appears to have greatest influence on imagery density of sites studied. Forage density estimates can be made on band 5 of MSS, provided site category identification is known. Additional data are provided concerning forage density and vegetation-soil relationship by color composites of MSS imagery. Reflectance differences shown on MSS bands 6 and 7 by Sand Hills lakes are related to water quality and possibly more specifically to total dissolved ions present in the water. Winter imagery with snow cover and low sun angle shows a marked enhancement of topography are associated with differences in forage density. High altitude color infrared photography appears to be a usable tool for recognition, measurement, and evaluation of go-back land.

Seevers, P. M.↗

Fracture mapping and strip mine inventory in the Midwest by using ERTS-1 imagery

Analysis of the ERTS-1 imagery and high-altitude infrared photography indicates that useful fracture data can be obtained in Indiana and Illinois despite a glacial till cover. ERTS MSS bands 5 and 7 have proven most useful for fracture mapping in coal-bearing rocks in this region. Preliminary results suggest a reasonable correlation between image-detected fractures and mine roof-fall accidents. Information related to surface mined land, such as disturbed area, water bodies, and kind of reclamation, has been derived from the analysis of ERTS imagery.

Wier, C. W.↗

Application of EREP imagery to fracture-related mine safety hazards and environmental problems in mining

The author has identified the following significant results. Numerous fracture traces were detected on both the color transparencies and black and white spectral bands. Fracture traces of value to mining hazards analysis were noted on the EREP imagery which could not be detected on either the ERTS-1 or high altitude aircraft color infrared photography. Several areas of mine subsidence occurring in the Busseron Creek area near Sullivan, Indiana were successfully identified using color photography. Skylab photography affords an increase over comparable scale ERTS-1 imagery in level of information obtained in mined lands inventory and reclamation analysis. A review of EREP color photography permitted the identification of a substantial number of non-fuel mines within the Southern Indiana test area. A new mine was detected on the EREP photography without prior data. EREP has definite value for estimating areal changes in active mines and for detecting new non-fuel mines. Gob piles and slurry ponds of several acres could be detected on the S-190B color photography when observed in association with large scale mining operations. Apparent degradation of water quality resulting from acid mine drainage and/or siltation was noted in several ponds or small lakes and appear to be related to intensive mining activity near Sullivan, Indiana.

Wier, C. E.↗

Application of EREP imagery to fracture-related mine safety hazards and environmental problems in mining

The author has identified the following significant results. All Skylab 2 imagery received to date has been analyzed manually and data related to fracture analysis and mined land inventories has been summarized on map-overlays. A comparison of the relative utility of the Skylab image products for fracture detection, soil tone/vegetation contrast mapping, and mined land mapping has been completed. Numerous fracture traces were detected on both color and black and white transparencies. Unique fracture trace data which will contribute to the investigator's mining hazards analysis were noted on the EREP imagery; these data could not be detected on ERTS-1 imagery or high altitude aircraft color infrared photography. Stream segments controlled by fractures or joint systems could be identified in more detail than with ERTS-1 imagery of comparable scale. ERTS-1 mine hazards products will be modified to demonstrate the value of this additional data. Skylab images were used successfully to update a mined land map of Indiana made in 1972. Changes in mined area as small as two acres can be identified. As the Energy Crisis increases the demand for coal, such demonstrations of the application of Skylab data to coal resources will take on new importance.

Wier, C. E.↗

Thermal contouring of forestry data: Wallops Island

The contouring of 8-13.5 micrometer thermal data collected over a forestry site in Virginia is described. The data were collected at an altitude of 1000 ft above terrain on November 4, 1970. The site was covered on three approximately parallel lines. The purpose of the contouring was to attempt to delineate pine trees attacked by southern pine bark beetle, and to map other important terrain categories. Special processing steps were required to achieve the correct aspect ratio of the thermal data. The reference for the correction procedure was color infrared photography. Data form and quality are given, processing steps are outlined, a brief interpretation of results is given, and conclusion are presented.

Thomson, F.↗

Evaluation of Skylab data for land use mapping

The present work compares four multispectral data sets acquired within a 24-hour time period over an area in south-central Indiana in a land use analysis of the study area. Data sets were acquired by the 4-channel multispectral scanner (MSS) on the ERTS satellite, the Earth Resource Environmental Package (EREP) 13-channel MSS on Skylab, the color infrared photography from the EREP camera system, and the black and white multiband photography from the EREP camera system. Overall performance of MSS data sets was better than that of digitized photographic data sets. Digitized color IR data sets were better overall than digitized black and white sets. Also, overall performance of 'optimum' four channels in Skylab MSS data set was essentially the same as that for the ERTS MSS data sets. However, when the four channels in the Skylab MSS which most nearly correspond to those in the ERTS MSS were used, overall performance of Skylab MSS data set was significantly lower than that for the ERTS MSS.

Biehl, L. L.↗

Urban environmental health applications of remote sensing

An urban area was studied through the use of the inventory-by-surrogate method rather than by direct interpretation of photographic imagery. Prior uses of remote sensing in urban and public research are examined. The effects of crowding, poor housing conditions, air pollution, and street conditions on public health are considered. Color infrared photography was used to categorize land use features and the grid method was used in photo interpretation analysis. The incidence of shigella and salmonella, hepatitis, meningitis, tuberculosis, myocardial infarction and veneral disease were studied, together with mortality and morbidity rates. Sample census data were randomly collected and validated. The hypothesis that land use and residential quality are associated with and act as an influence upon health and physical well-being was studied and confirmed.

Rush, M.↗

Vegetational analysis with Skylab-3 imagery

The author has identified the following significant results. Color infrared photography from Skylab 3 appeared to be superior to ERTS imagery in a vegetational study of northeastern North Carolina. An accuracy of 87% was achieved in delimiting species composition and zonation patterns of three coastal, vegetation classes. A vegetation map of Perquimans County, North Carolina, seemed to have a high degree of correlation with information provided by high altitude U-2 photography. Random verification sites revealed an overall interpretation accuracy above 84%. Comparison of maps drawn utilizing Skylab photography with North Carolina Dept. of Agriculture estimates of crop acreage revealed some marked discrepancies. The chief difference lies in the nonagricultural category in which there is a 30% discrepancy. This fact raised some questions as to the definition of nonagricultural land uses and methods used by the State Dept. of Agriculture to determine actual percentages of crops grown.

Welby, C. W.↗

Remote sensing over North Merritt Island

The author has identified the following significant results. For monitoring the surface environment of North Merritt Island, two methods are studied, namely, color infrared photography and machine processing of LANDSAT multispectral scanner data. C.I.R. photos made at a height of about 12,000 ft were found to define the borders of ground features around the space shuttle runway with a nonsignificant mean error of 0.138 meters but a wide range, which can be reduced with photos taken at about 6,000 ft. LANDSAT multispectral scanner data, transformed by use of the function f(g) = g1 + g2 -g3 -g4 where g1, g2, g3, and g4 represent reflectance or grey levels of multispectral channels 1,2,3, and 4, gave values which are classifiable into a relatively small number of categories.

Poonai, P.↗

Application of remote sensing to the location of hydrologically active /source/ areas

Recent hydrologic research has provided theoretical support for a hypothesis generally known as the variable source area concept. However, experimental study of variable source areas has been hampered by lack of suitable methods for identifying and mapping them on a large scale basis. Field studies combined with color infrared photography and direct measurement of soil moisture and other hydrologic variables have shown that it is definitely possible to differentiate high and low soil moisture zones in a watershed. Furthermore, mapping of high moisture zones for the 1839 hectare Lowery Creek, Wisconsin drainage basin has revealed a pattern that is fully consistent with hypotheses concerning source areas. Examination of transmittance curves for high moisture zones indicates that source areas may be delineated on the basis of the ratio of their transmittance at 550 nm to that at 675 nm.

Ishaq, A. M.↗

Planning applications in east central Florida

The author has identified the following significant results. St. Johns National Wildlife Refuge, a 4000 acre marsh, was established primarily to protect the Dusky Seaside Sparrow. A vegetation map of the refuge based on ground observations and color infrared photography was made. The preferred habitat of this sparrow is high-to-medium density spartina (a marsh grass) with no trees nearby. An increase in spartina density corresponds to an increase in marsh wetness. A thematic map shows the birds habitat preferences.

Hannah, J. W.↗

An assessment of the impact of water impoundment and diversion structures on vegetation in Southern Arizona

High-altitude color infrared photography was used to survey existing conditions, both upstream and downstream, from nineteen diversion structures in Southern Arizona to determine their effect upon vegetation health, vigor, and cover. A diversion structure is defined as a man/made feature constructed to control storm runoff. The results are used to determine the policy for future structure design.

Conn, J. S.↗

Toward the modeling of land use change: A spatial analysis using remote sensing and historical data

It was hypothesized that the chronological observation of land use change could be shown to follow a predictable pattern and these patterns could be correlated with other statistical data to develop transition probabilities suitable for modeling purposes. A literature review and preliminary research, however, indicated a totally stochastic approach was not practical for simulating land use change and thus a more deterministic approach was adopted. The approach used assumes the determinants of the land use conversion process are found in the market place, where land transactions among buyers and sellers occur. Only one side of the market transaction process is studied, however, namely, the purchaser's desires in securing an ideal or suitable site. The problem was to identify the ideal qualities, quantities or attributes desired in an industrial site (or housing development), and to formulate a general algorithmic statement capable of identifying potential development sites. Research procedures involved developing a list of variables previously noted in the literature to be related to site selection and streamlining the list to a set suitable for statistical testing. A sample of 157 industries which have located (or relocated) in the 16-county Knoxville metropolitan region since 1950 was selected for industrial location analysis. Using NASA color infrared photography and Tennessee Valley Authority historical aerial photography, data were collected on the spatial characteristics of each industrial location event. These data were then subjected to factor analysis to determine the interrelations of variables.

Honea, R. B.↗