Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Novel method for the prediction of an interface bonding species at alumina/metal interfaces

Interface bonding between alumina and various metals is discussed from the viewpoint of chemical thermodynamics. A method to predict the interface bonding species at an alumina/metal interface under equilibrium conditions is proposed by using the concept of chemical equilibrium for interface termination. The originality of this method is in the way a simple estimation of the interface binding energy, which is generally applicable to most metals, is developed. The effectiveness of this method is confirmed by careful examination of the experimental results. Comparison of the predicted and experimentally observed interface terminations reveals that the proposed method agrees well with the reported results. The method uses only basic quantities of pure elements and the formation enthalpy of oxides. Therefore, it can be applied to most metals in the periodic table and is useful for screening materials in the quest to develop interfaces with particular functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fe-Al interface intermixing and the role of Ti, V, and Zr as a stabilizing interlayer at the interface

Fe-Al bilayer interfaces with and without interface stabilizing layers (Ti, V or Zr) were fabricated using dc magnetron sputtering. Intermixing layer thickness and the effectiveness of the stabilizing layer (Ti, V, Zr) at the interface were studied using Rutherford backscattering spectrometry (RBS) and X-ray reflectometry (XRR). The result for the intermixing thickness of the AlFe layer is always larger when Fe is deposited on Al as compared to when Al is deposited on Fe. By comparing measurements with computer simulations, the thicknesses of the AlFe layers were determined to be 20.6 Å and 41.1 Å for Al/Fe and Fe/Al bilayer systems, respectively. The introduction of Ti and V stabilizing layers at the Fe-Al interface reduced the amount of intermixing between Al and Fe, consistent with the predictions of model calculations. The Zr interlayer, however, was ineffective in stabilizing the Fe-Al interface in spite of the chemical similarities between Ti and Zr. In addition, analysis suggests that the Ti interlayer is not effective in stabilizing the Fe-Al interface when the Ti interlayer is extremely thin (~3 Å) for these sputtered metallic films.

36 MATERIALS SCIENCE↗

Dependence of interface energetics and kinetics on catalyst loading in a photoelectrochemical system

Solar hydrogen production by the photoelectrochemical method promises a means to store solar energy. While it is generally understood that the process is highly sensitive to the nature of the interface between the semiconductor and the electrolyte, a detailed understanding of this interface is still missing. For instance, few prior studies have established a clear relationship between the interface energetics and the catalyst loading amount. Here we aim to study this relationship on a prototypical Si-based photoelectrochemical system. Two types of interfaces were examined, one with GaN nanowires as a protection layer and one without. It was found that when GaN was present, higher Pt loading (> 0.1 μg/cm 2 ) led to not only better water reduction (and, hence, hydrogen evolution) kinetics but also more favorable interface energetics for greater photovoltages. In the absence of the protection layer, by stark contrast, increased Pt loading exhibited no measurable influence on the interface energetics, and the main difference was observed only in the hydrogen evolution kinetics. Furthermore, the study sheds new light on the importance of interface engineering for further improvement of photoelectrochemical systems, especially concerning the role of catalysts and protection layers.

14 SOLAR ENERGY↗

Modeling Thermal and Stress Behavior of the Fuel-clad Interface in Monolithic Fuel Mini-plates

As part of the Global Threat Reduction Initiative, a fuel development and qualification program is in process with the objective of qualifying very high density low enriched uranium fuel that will enable the conversion of high performance research reactors with operational requirements beyond those supported with currently available low enriched uranium fuels. The high density of the fuel is achieved by replacing the fuel meat with a single monolithic low enriched uranium-molybdenum fuel foil. Doing so creates differences in the mechanical and structural characteristics of the fuel plate because of the planar interface created by the fuel foil and cladding. Furthermore, the monolithic fuel meat will dominate the structural properties of the fuel plate rather than the aluminum matrix, which is characteristic of dispersion fuel types. Understanding the integrity and behavior of the fuel-clad interface during irradiation is of great importance for qualification of the new fuel, but can be somewhat challenging to determine with a single technique. Efforts aimed at addressing this problem are underway within the fuel development and qualification program, comprised of modeling, as-fabricated plate characterization, and post-irradiation examination. An initial finite element analysis model has been developed to investigate worst-case scenarios for the basic monolithic fuel plate structure, using typical mini-plate irradiation conditions in the Advanced Test Reactor. Initial analysis shows that the stress normal to the fuel-clad interface dominates during irradiation, and that the presence of small, rounded delaminations at the interface is not of great concern. However, larger and/or fuel-clad delaminations with sharp corners can create areas of concern, as maximum principal cladding stress, strain, displacement, and peak fuel temperature are all significantly increased. Furthermore, stresses resulting from temperature gradients that cause the plate to bow or buckle in an unconstrained fuel plate configuration is greatly enhanced in a constrained fuel plate configuration. The sensitivities of the model and input parameters are discussed, along with some overlap of initial experimental observations using as-fabricated plate characterization and post-irradiation examination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Exact sub-grid interface correction schemes for elliptic interface problems

We introduce a non-conforming finite element method for second order elliptic interface problems. Our approach applies to problems in which discontinuous coefficients and singular sources on the interface may give rise to jump discontinuities in either the solution or its normal derivative. Given a standard background mesh and an interface that passes between elements, the key idea is to construct a singular correction function which satisfies the prescribed jump conditions, providing accurate sub-grid resolution of the discontinuities. Utilizing the closest point extension and an implicit interface representation by the signed distance function, an algorithm is established to construct the correction function. The result is a function which is supported only on the interface elements, represented by the regular basis functions, and bounded independently of the interface location with respect to the background mesh. In the particular case of a constant second order coefficient, our regularization by singular function is straightforward, and the resulting left-hand-side is identical to that of a regular problem without introducing any instability. The influence of the regularization appears solely on the right-hand-side, which simplifies the implementation. In the more general case of discontinuous second order coefficients, a normalization is invoked which introduces a constraint equation on the interface. This results in a problem statement similar to that of a saddle-point problem. We employ two-level-iteration as the solution strategy, which exhibits aspects similar to those of iterative preconditioning strategies.

97 MATHEMATICS AND COMPUTING↗

Simulations and Analysis of the Reshocked Inclined Interface Richtmyer–Meshkov Instability for Linear and Nonlinear Interface Perturbations

A computational study of the Richtmyer–Meshkov instability (RMI) is presented for an inclined interface perturbation in support of experiments being performed at the Texas A&M shock tube facility. The study is comprised of 2D, viscous, diffusive, compressible simulations performed using the arbitrary Lagrange Eulerian code, ARES, developed at Lawrence Livermore National Laboratory. These simulations were performed to late times after reshock with two initial interface perturbations, in the linear and nonlinear regimes each, prescribed by the interface inclination angle. The interaction of the interface with the reshock wave produced a complex 2D set of compressible wave interactions including expansion waves, which also interacted with the interface. Distinct differences in the interface growth rates prior to reshock were found in previous work. The current work provides in-depth analysis of the vorticity and enstrophy fields to elucidate the physics of reshock for the inclined interface RMI. After reshock, the two cases exhibit some similarities in integral measurements despite their disparate initial conditions but also show different vorticity decay trends, power law decay for the nonlinear and linear decay for the linear perturbation case.

42 ENGINEERING↗

Hidden Interface Driven Exchange Coupling in Oxide Heterostructures

A variety of emergent phenomena have been enabled by interface engineering in complex oxides. The existence of an intrinsic interfacial layer has often been found at oxide heterointerfaces. However, the role of such an interlayerin controlling functionalities is not fully explored. Here, we report the control of the exchange bias (EB) in single-phase manganite thin films with nominallyuniform chemical composition across the interfaces. The sign of EB depends on the magnitude of the cooling field. A pinned layer, confirmed by polarized neutron reflectometry, provides the source of unidirectional anisotropy. The origin of the exchange bias coupling is discussed in terms of magnetic interactions between the interfacial ferromagnetically reduced layer and the bulk ferromagnetic region. The sign of EB is related to the frustration of antiferromagnetic coupling between the ferromagnetic region and the pinned layer. Our results shed new light on using oxide interfaces to design functional spintronic devices.

epitaxial thin films↗

A method for site-specific and cryogenic specimen fabrication of liquid/solid interfaces for atom probe tomography

A site-specific, cryogenic, focused ion beam (FIB) method is presented for the preparation of atom probe tomography (APT) specimens from a frozen liquid/solid interface. As a practical example, the interface between water and a corroded boroaluminosilicate glass has been characterized by APT for the first time. The water/glass interface is preserved throughout specimen preparation by plunge freezing the corroding glass particles with the corrosion solution into slush nitrogen. Site-specific specimen preparation is enabled through a new approach to extract and mount a small volume of material using a cryogenically cooled FIB stage and micromanipulator. The prepared APT specimens are subsequently transferred from the FIB to APT under cryogenic and high-vacuum conditions using a novel FIB/APT transfer shuttle and home-built environmental transfer hub attached to the APT system. Particular focus is given to the technical methods for specimen fabrication under cryogenic conditions. Persistent challenges are discussed in addition to future opportunities for this new specimen preparation method.

cryogenic FIB, atom probe tomography (APT), corros↗

New Insights into Secondary Organic Aerosol Formation at the Air–Liquid Interface

Air-liquid interfacial processing of volatile organic compound oxidation has been suggested as an important source of secondary organic aerosols. However, owing to the lack of techniques for in situ air-liquid interface analysis, the detailed interfacial mechanism remains speculative. To obviate this, the analysis of air-liquid interfacial reactions and the dynamics of glyoxal oxidation as a model volatile organic compound using in situ liquid synchrotron-based vacuum ultraviolet single photon ionization mass spectrometry enabled by the system for analysis at the liquid vacuum interface microreactor is reported. This approach allows for determination of reaction intermediates and oxidation products including polymers and oligomers at the air-liquid interface by mass spectral analysis and appearance energy measurements. Furthermore, an expanded reaction mechanism of photooxidation free radical induced reactions as a source of aqueous secondary organic aerosol formation is proposed based on these new results, suggesting that single photon ionization could be applied to provide unique insights into interfacial chemistry changing the earth atmospheric composition.

aqueous secondary organic aerosol, glyoxal, photoo↗

Accelerated Cu2O Reduction by Single Pt Atoms at the Metal-Oxide Interface§

The reducibility of metal oxides, when serving as the catalyst support or the active sites themselves, plays an important role in heterogeneous catalytic reactions. Here we present an integrated experimental and theoretical study that reveals how the addition of small amounts of atomically dispersed Pt at the metal/oxide interface dramatically enhances the reducibility of a Cu2O thin film by H2. X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD) results reveal that upon oxidation, a PtCu single-atom alloy (SAA) surface is covered by a thin Cu2O film and is therefore unable to dissociate H2. Despite this, in situ studies using ambient pressure (AP) XPS reveal that the presence of a small amount of Pt under the oxide layer can, at the single-atom limit, promote the reduction of Cu2O by H2 at room temperature. We build two density functional theory based surface models to better understand these experimental findings: A Cu2O/Cu(111)-like surface oxide layer, known as the ‘29’ oxide, in which Pt is alloyed into the Cu(111) surface as well as a PtCu SAA. Our calculations suggest that the increased activity is due to the presence of atomically dispersed Pt under the surface oxide layer, which weakens the Cu-O bonds in its immediate vicinity, thus making the interface between subsurface Pt and the surface oxide a nucleation site for the formation of metallic Cu. This initial step in the reduction process results in the presence of surface Pt atoms surrounded by metallic Cu patches, and the Pt atoms become active in H2 dissociation, which consequently accelerates the reduction of the oxide layer. This work demonstrates how isolated Pt atoms at the metal/oxide interface of a Cu-based catalyst accelerate the reduction of the oxide and, therefore, helps maintain the active, reduced state of the catalyst under reaction conditions, as is required for the synthesis of methanol from CO2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PHIL Interface Design for Use With a Voltage-Regulated Amplifier

Power hardware-in-the-loop (PHIL) has emerged as a leading strategy to thoroughly assess the impact of proprietary inverter controls on a specific power system. The development of a PHIL test bed typically involves an inverter under test, a power amplifier, controllable DC supply, and a digital real-time simulator (DRTS) to simulate the power system under study. As a result of PHIL nonidealities, a form of digital compensation within the DRTS is used, which is commonly referred to as a PHIL interface. Many existing methods use legacy power amplifiers that do not contain internal voltage regulation. These existing interface methods are based around a voltage regulator within the DRTS and do not consider the interaction with the controls in newer amplifiers. In this study, a three-step approach of PHIL interface development for modern power amplifiers with built-in voltage regulation is introduced and is validated in hardware with a 30-kW grid-following inverter.

DRTS↗

Discovering Reactant Supply Pathways at Electrode/PEM Reaction Interfaces Via a Tailored Interface-Visible Characterization Cell

In situ and micro-scale visualization of electrochemical reactions and multiphase transports on the interface of porous transport electrode (PTE) materials and solid polymer electrolyte (SPE) has been one of the greatest challenges for electrochemical energy conversion devices, such as proton exchange membrane electrolyzer cells (PEMECs), CO 2 reduction electrolyzers, PEM fuel cells, etc. Here, an interface-visible characterization cell (IV-CC) is developed to in situ visualize micro-scaled and rapid electrochemical reactions and transports in PTE/SPE interfaces. Taking the PEMEC of a green hydrogen generator as a study case, the unanticipated local gas blockage, micro water droplets, and their evolution processes are successfully visualized on PTE/PEM interfaces in a practical PEMEC device, indicating the existence of unconventional reactant supply pathways in PEMs. Further comprehensive results reveal that PEM water supplies to reaction interfaces are significantly impacted with current densities. Here these results provide critical insights about the reaction interface optimization and mass transport enhancement in various electrochemical energy conversion devices.

30 DIRECT ENERGY CONVERSION↗

Accurate gradient approximation for complex interface problems in 3D by an improved coupling interface method

Most elliptic interface solvers become complicated for complex interface problems at those “exceptional points” where there are not enough neighboring interior points for high order interpolation. Such complication increases especially in three dimensions. Usually, the solvers are thus reduced to low order accuracy. In this paper, we classify these exceptional points and propose two recipes to maintain order of accuracy there, aiming at improving the previous coupling interface method [26]. Yet the idea is also applicable to other interface solvers. The main idea is to have at least first order approximations for second order derivatives at those exceptional points. Recipe 1 is to use the finite difference approximation for the second order derivatives at a nearby interior grid point, whenever this is possible. Recipe 2 is to flip domain signatures and introduce a ghost state so that a second-order method can be applied. This ghost state is a smooth extension of the solution at the exceptional point from the other side of the interface. The original state is recovered by a post-processing using nearby states and jump conditions. The choice of recipes is determined by a classification scheme of the exceptional points. The method renders the solution and its gradient uniformly second-order accurate in the entire computed domain. Numerical examples are provided to illustrate the second order accuracy of the presently proposed method in approximating the gradients of the original states for some complex interfaces which we had tested previous in two and three dimensions, and a real molecule ( (1D63)) which is double-helix shape and composed of hundreds of atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carrier lifetimes and interface recombination velocities in CdTe/Mg{sub x}Cd{sub 1−x}Te double heterostructures with different Mg compositions grown by molecular beam epitaxy

The interface recombination velocities of CdTe/Mg{sub x}Cd{sub 1−x}Te double heterostructure (DH) samples with different CdTe layer thicknesses and Mg compositions are studied using time-resolved photoluminescence measurements. A lowest interface recombination velocity of 30 ± 10 cm/s has been measured for the CdTe/Mg{sub 0.46}Cd{sub 0.54}Te interface, and a longest carrier lifetime of 0.83 μs has been observed for the studied DHs. These values are very close to the best reported numbers for GaAs/AlGaAs DHs. The impact of carrier escape through thermionic emission over the MgCdTe barrier on the recombination process in the DHs is also studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quasi-two-dimensional electron gas at the interface of γ-Al{sub 2}O{sub 3}/SrTiO{sub 3} heterostructures grown by atomic layer deposition

We report the formation of a quasi-two-dimensional electron gas (2-DEG) at the interface of γ-Al{sub 2}O{sub 3}/TiO{sub 2}-terminated SrTiO{sub 3} (STO) grown by atomic layer deposition (ALD). The ALD growth of Al{sub 2}O{sub 3} on STO(001) single crystal substrates was performed at temperatures in the range of 200–345 °C. Trimethylaluminum and water were used as co-reactants. In situ reflection high energy electron diffraction, ex situ x-ray diffraction, and ex situ cross-sectional transmission electron microscopy were used to determine the crystallinity of the Al{sub 2}O{sub 3} films. As-deposited Al{sub 2}O{sub 3} films grown above 300 °C were crystalline with the γ-Al{sub 2}O{sub 3} phase. In situ x-ray photoelectron spectroscopy was used to characterize the Al{sub 2}O{sub 3}/STO interface, indicating that a Ti{sup 3+} feature in the Ti 2p spectrum of STO was formed after 2–3 ALD cycles of Al{sub 2}O{sub 3} at 345 °C and even after the exposure to trimethylaluminum alone at 300 and 345 °C. The interface quasi-2-DEG is metallic and exhibits mobility values of ∼4 and 3000 cm{sup 2} V{sup −1} s{sup −1} at room temperature and 15 K, respectively. The interfacial conductivity depended on the thickness of the Al{sub 2}O{sub 3} layer. The Ti{sup 3+} signal originated from the near-interfacial region and vanished after annealing in an oxygen environment.

36 MATERIALS SCIENCE↗