Search NASA⌕ Search

SEARCH · Search NASA

Results for “Imidazolium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fast and Non-Destructive Determination of Water Content in Ionic Liquids at Varying Temperatures by Raman Spectroscopy and Multivariate Regression Analysis

Imidazolium acetate ionic liquids (ILs) have been utilized as promising solvents in many applications that involve varying water content and temperature. These experimental variables affect the anion-cation intermolecular interactions, which in turn influence the performance of the ILs in these applications. Here, this paper shows Raman spectroscopy can be used as an operando method to measure water content in IL solvents when simultaneous temperature changes may occur. The Raman spectra of 1-alkyl-3-methylimidazolium acetate ILs (alkyl chain length n = 2, 4, 6, 8) with varying water content (from 0.028 to 0.899 water mole fraction) and temperature (from 78.1 K to 423.1 K) were measured. Increasing the water content or decreasing the temperature of the tested ILs weakens the anion-cation intermolecular interactions. The water content of these ILs can be quantified even in conditions when the temperature is changing using Raman spectroscopy combined with multivariate regression analysis, including principal component regression (PCR), partial-least-squares regression (PLSR), and artificial neural networks (ANNs). The ANN model combined with partial-least-squares (PLS) achieves the highest prediction accuracy of water content in ILs at varying temperatures (RMSECV = 0.017, R 2 CV = 99.1%, RMSEP = 0.019, R 2 P = 98.8%, RPD = 8.93). Raman spectroscopy provides a potential fast non-destructive operando method to monitor the water content of ILs even in applications when the temperature may be simultaneously altered; this information can lead to the optimized use of these ILs in many applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Modeling dissociation of ionic liquids with electrolyte NRTL model

Dissociation of ionic liquids (ILs) is critical to electrochemical process performance by affecting ionic conductivity. Prior studies of thermodynamic modeling either assumed no dissociation or complete dissociation that were not consistent with experimental observations. This work presented an eNRTL model for three aqueous imidazolium-based IL systems: [Emim][EtSO 4 ], [Emim][TFA], and [Emim][TfO]. The model accurately correlates the IL dissociation and VLE data in the entire concentration range from pure IL to infinite dilution aqueous solution. The system non-ideality is dominated by the dissociation chemistry. Dissociation behavior is driven by strong short-range interaction of the molecular IL-water pair relative to the dissociated IL-water pair, consistent with prior studies indicating that molecular IL and water can form an energetically favorable complex. The interaction energy parameters calculated in this work qualitatively agrees with the hydrogen bonding ability of the anions previously reported. This research not only provides a model that well describes the IL dissociation but also demonstrates the physical significance of eNRTL model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Anion-dependent phase behavior of methylimidazolium-based ionic liquids mixed with water: Correlation between local molecular structure and mesoscale behaviors

The mesoscopic phase behavior of decylmethylimidazolium (C 10 mim) ionic liquids (ILs) bearing three monovalent anions—thiocyanate (SCN − ), nitrate (NO 3 − ), and chloride (Cl − )—mixed with water at relatively high IL contents (50–95 wt%) was investigated. Small-angle and wide-angle X-ray scattering (SAXS/WAXS) were employed to follow the evolution of both local and mesoscale structures across this composition range. In the absence of water, C 10 mimSCN and C 10 mimCl behaved as disordered liquids, whereas C 10 mimNO 3 spontaneously formed a hexagonally ordered cylindrical mesophase and displayed a sticky-solid macroscopic appearance. Upon addition of water, C 10 mimSCN remained a viscous liquid and only weakly ordered lamellar domains were observed. This limited ordering is attributed to the lack of hydrogen bonding and weak interaction energy between SCN − anions and C 10 mim + cations. In contrast, the trigonal-planar NO 3 − and point-like Cl − anions promoted the formation of well-defined hexagonal mesophases up to 35–45 wt% water. The formation of hydrogen bonding of the two anions with imidazolium ring protons likely enabled the creation of compact ion clusters that effectively exclude water molecules from the immediate vicinity of the IL aggregates. These findings demonstrate that the interaction energy between ion pairs dictate IL-water interactions and therefore control the transition from disordered liquids to ordered mesophases in IL/water mixtures with high IL contents. In conclusion, the combined SAXS/WAXS analysis reveals a correlation between local intermolecular structure and the emergence of mesoscopic order, providing a systematic framework for tailoring mesoscale structures in alkylimidazolium-based IL/water systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding the Photochemical Properties of Polythiophene Polyelectrolyte Soft Aggregates with Sodium Dodecyl Sulfate for Antimicrobial Activity

The threat of antibiotic-resistant bacteria is an ever-increasing problem in public health. In this report, we examine the photochemical properties with a proof-of-principle biocidal assay for a novel series of regio-regular imidazolium derivative poly-(3-hexylthiophene)/sodium dodecyl sulfate (P3HT-Im/SDS) materials from ultrafast sub-ps dynamics to μs generation of reactive oxygen species (ROS) and 30 min biocidal reactivity with Escherichia coli (E. coli). This broad series encompassing pure P3HT-Im to cationic, neutral, and anionic P3HT-Im/SDS materials are all interrogated by a variety of techniques to characterize the physical material structure, electronic structure, and antimicrobial activity. Our results show that SDS complexation with P3HT-Im results in aggregate materials with reduced ROS generation and light-induced anti-microbial activity. However, our characterization reveals that the presence of non-aggregated or lightly SDS-covered polymer segments is still capable of ROS generation. Full encapsulation of the P3HT-Im polymer completely deactivates the light killing pathway. High SDS concentrations, near and above critical micelle concentration, further deactivate all anti-microbial activity (light and dark) even though the P3HT-Im regains its electronic properties to generate ROS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tuning Surface, Phase, and Magnetization of Superparamagnetic Magnetite by Ionic Liquids: Single-Step Microwave-Assisted Synthesis

Achieving colloidal and chemical stability in ferrofluids by surface modification requires multiple steps, including purification, ex situ modification steps, and operation at high temperatures. In this study, a single-step microwave-assisted methodology is developed for iron oxide nanoparticle (IONP) synthesis utilizing a series of imidazolium-based ionic liquids (ILs) with chloride, bis(trifluoromethylsulfonyl)imide, and pyrrolide anions as the reaction media, thus eliminating the use of volatile organics while enabling rapid synthesis at 80 °C as well as in situ surface functionalization. The characterized surface functionality, hydrodynamic particle size, magnetization, and colloidal stability of the IONPs demonstrate a strong dependence on the IL structure, ion coordination strength, reactivity, and hydrophilicity. The IONPs present primarily a magnetite (Fe 3 O 4 ) phase with superparamagnetism with the highest saturation magnetization at 81 and 73 emu/g at 10 and 300 K, respectively. Depending on the IL coating, magnetization and exchange anisotropy decrease by 20 and 2–3 emu/g (at 35 wt % IL), respectively, but still represent the highest magnetization achieved for coated IONPs by a coprecipitation method. Further, the surface-functionalized superparamagnetic magnetite nanoparticles show good dispersibility and colloidal stability in water and dimethyl sulfoxide at 0.1 mg/mL concentration over the examined 3 month period. This study reports on the intermolecular and chemical interactions between the particle surface and the ILs under synthetic conditions as they relate to the magnetic and thermal properties of the resulting IONPs that are well suited for a variety of applications, including separation and catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Layered Heterostructure Ionogel Electrolytes for High‐Performance Solid‐State Lithium‐Ion Batteries

Abstract Ionogel electrolytes based on ionic liquids and gelling matrices offer several advantages for solid‐state lithium‐ion batteries, including nonflammability, wide processing compatibility, and favorable electrochemical and thermal properties. However, the absence of ionic liquids that are concurrently stable at low and high potentials constrains the electrochemical windows of ionogel electrolytes and thus their high‐energy‐density applications. Here, ionogel electrolytes with a layered heterostructure are introduced, combining high‐potential (anodic stability: >5 V vs Li/Li + ) and low‐potential (cathodic stability: <0 V vs Li/Li + ) imidazolium ionic liquids in a hexagonal boron nitride nanoplatelet matrix. These layered heterostructure ionogel electrolytes lead to extended electrochemical windows, while preserving high ionic conductivity (>1 mS cm −1 at room temperature). Using the layered heterostructure ionogel electrolytes, full‐cell solid‐state lithium‐ion batteries with a nickel manganese cobalt oxide cathode and a graphite anode are demonstrated, exhibiting voltages that are unachievable with either the high‐potential or low‐potential ionic liquid alone. Compared to ionogel electrolytes based on mixed ionic liquids, the layered heterostructure ionogel electrolytes enable higher stability operation of full‐cell lithium‐ion batteries, resulting in significantly enhanced cycling performance.

Hyun, Woo Jin↗
DOE OSTI2025

Transparent and Conductive Polyimide‐Ionene Hybrid Interlayers for High Performance and Cost‐Effective Semitransparent Organic Solar Cells

The contradiction between high transmittance and favorable conductivity poses a great challenge in developing effective cathode interlayer (CIL) materials with sufficient thickness tolerance, which hinders the further advancement of organic solar cells (OSCs). Herein, a completely new class of alcohol processable polyimide-ionene hybrids (PIIHs) is proposed by melding pyromellitic diimide (PMD) subunits into imidazolium-based ionenes backbone covalently. These PIIHs, named PMD-DI and PMD-PD, boast high transparency, suitable energy levels, and decent conductivity. A higher PMD content endows PMD-PD with improved work function tunability, electrical properties, and crystallinity, enabling PMD-PD as CIL material with excellent thickness-insensitive characteristics, while simultaneously improving device stability significantly. Furthermore, PMD-PD also exhibits good compatibility with various electrodes and active layers, offering solar cell efficiencies of up to 19.91% and 19.29% with Ag and Cu cathodes, respectively. More importantly, the application of PMD-PD can improve the performance of semi-transparent OSCs without losing transmittance, thereby drastically enhancing the light utilization efficiency to 4.04% with an ultrathin, low-cost Cu cathode, that competes with leading optical modulation-free semitransparent OSCs with expensive Ag cathodes. This work opens a pathway to realize transparent and conductive interlayers by strategic molecular design, leading to highly efficient, stable, and cost-effective OSCs suitable for diverse applications.

You, Zuhao↗
DOE OSTI2026

A Solid State Zwitterionic Plastic Crystal With High Static Dielectric Constant

Solid materials with a high dielectric constant have a wide range of applications in the energy storage field. In this research, an imidazolium-based zwitterion is designed, synthesized, and confirmed to have a plastic crystal phase based on the following experimental and computational evidence: (i) the presence of long-range order with weak intermolecular forces and competing attractive-repulsive interactions along different crystallographic directions; (ii) the observation of more than one endotherm on heating including a solid-solid phase transition at T s-s = −26 °C and melting of the plastic crystal at T m = 72°C; (iii) a low entropy of fusion at melting (2.1 JK −1 mol −1 ); (iv) a strongly anisotropic morphology; (v) relatively fast dynamics originating from short-range degrees of freedom. Furthermore, it exhibits a very high dielectric constant in the plastic crystal solid state (147 at −10°C and 103 at 70°C) due to the rotational degrees of freedom of plastic crystals that arise from weak net intermolecular interactions of zwitterions due to only having two carbons between the anion and cation. This material conveniently remains in the plastic crystal phase within 50 K of ambient temperature. This discovery opens new opportunities in the search for solid-state high dielectric constant materials.

dielectric relaxation↗
DOE OSTI2025

Constructing Water‐Stable Porous Organic Salts via Suppressed Proton Integration Using Fluorinated Tetrazole Tectons

Porous organic salts (POSs) are an emerging class of materials with ordered ionic architectures, offering excellent proton transfer and water uptake properties. However, conventional POS synthesis via strong acid–base neutralization (e.g., ─SO₃H and ─NH₂) leads to extensive hydrogen bonding with water, compromising stability in aqueous and water-lean environments. Here, we address this challenge by designing POSs with hydrophobic porous channels and minimal hydrogen bonding formation. Our key innovation is the use of fluorinated tetrazole as a weak acid tecton and a tetra-substituted imidazole precursor devoid of active protons as the base. Single-crystal analysis and computational modeling reveal that the structural integrity of the synthesized POSs arises primarily from cation–anion interactions, with water confined as clusters in the pores, independent of hydrogen bonding with the scaffold. Robustness of the POS structure under aqueous and water-lean conditions is confirmed by X-ray and neutron scattering, as well as computational modeling, confirming preserved packing and crystal structures. The stability of POS is further demonstrated in aqueous iodine capture, with imidazolium cations and C–F functionalizations serving as strong adsorption sites. As a result, the approach developed herein further pushes the boundary of POS materials to withstand both aqueous and water-lean conditions.

Fluorinated tecton↗
DOE OSTI2023

Enhancing CO 2 Transport Across a PEEK‐Ionene Membrane and Water‐Lean Solvent Interface

Abstract Efficient direct air capture (DAC) of CO 2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO 2 ‐selective membrane coupled with a CO 2 capture solvent acting as a draw solution. Here, the interactions between a leading water‐lean carbon‐capture solvent, a polyether ether ketone (PEEK)‐ionene membrane, CO 2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO 2 , presenting spectroscopic evidence of CO 2 diffusion through benzylic regions within the PEEK‐ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water‐lean capture solvents provide a thermodynamic and kinetic funnel to draw CO 2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon‐capture solvent and CO 2 produces carbamic acid, disrupting interactions between the imidazolium (Im + ) cations and the bistriflimide anions within the PEEK‐ionene membrane, thereby creating structural changes through which CO 2 can diffuse more readily. Consequently, this restructuring results in CO 2 diffusion at the interface that is faster than CO 2 diffusion in the bulk carbon‐capture solvent.

Walter, Eric D.↗
DOE OSTI2025

Evaluation of Density-Functional Tight-Binding Methods for Simulation of Protic Molecular Ion Pairs

In this work, we benchmark the accuracy of the density-functional tight-binding (DFTB) method, namely the long-range corrected second-order (LC-DFTB2) and third-order (DFTB3) models, for predicting energetics of imidazolium-based ionic liquid (IL) ion pairs. We compare the DFTB models against popular density functionals such as LC-ωPBE and B3LYP, using ab initio domain-based local pair-natural orbital coupled cluster (DLPNO-CC) energies as reference. Calculations were carried out in the gas phase, as well as in aqueous solution using implicit solvent methods. We find that the LC-DFTB2 model shows excellent performance in the gas phase and agrees well with reference energies in implicit solvent, often outperforming DFTB3 predictions for complexation energetics. Our study identifies a range of opportunities for use of the LC-DFTB method and quantifies its sensitivity to protonation states and the types of chemical interactions between ion pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Imaging a solvent-swollen polymer gel network by open liquid transmission electron microscopy

Visualizing the network of a solvent-swollen polymer gel remains problematic. To address this challenge, open transmission electron microscopy (TEM) was applied to thin gel films permeated by a nonvolatile ionic liquid. The targeted physical gels were prepared by cooling concentrated solutions of poly(ethylene glycol) in 1-ethyl-3-methyl imidazolium ethyl sulfate [EMIM][EtSO 4 ]. During the cooling, gelation occurred by a frustrated crystallization of the dissolved polymer, leading to a percolated, solvent-permeated semicrystalline network in which nanoscale polymer crystals acted as crosslinks. Crystalline features ranging from ~5 to ~200 nm were observed, with the visible network strands dominantly consisting of long curvilinear crystallites of ~15–20 nm diameter. Nascent spherulites irregularly decorated the network, creating a complex structural hierarchy that complicated analyses. Lacking diffraction contrast, TEM did not visualize the many disordered, fully solvated PEG chains present in the voids between crystals. Finally, recognizing that a network's three dimensionality is ambiguous when assessed through two-dimensional microscopy projections, a small gel region was studied by TEM tomography, revealing a nearly isotropic three-dimensional arrangement of the curvilinear crystallites, which displayed remarkably uniform cylindrical cross sections.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Organometallic Synthesis of Bimetallic Cobalt‐Rhodium Nanoparticles in Supported Ionic Liquid Phases (Co x Rh 100− x @SILP) as Catalysts for the Selective Hydrogenation of Multifunctional Aromatic Substrates

Abstract The synthesis, characterization, and catalytic properties of bimetallic cobalt‐rhodium nanoparticles of defined Co:Rh ratios immobilized in an imidazolium‐based supported ionic liquid phase (Co x Rh 100− x @SILP) are described. Following an organometallic approach, precise control of the Co:Rh ratios is accomplished. Electron microscopy and X‐ray absorption spectroscopy confirm the formation of small, well‐dispersed, and homogeneously alloyed zero‐valent bimetallic nanoparticles in all investigated materials. Benzylideneacetone and various bicyclic heteroaromatics are used as chemical probes to investigate the hydrogenation performances of the Co x Rh 100− x @SILP materials. The Co:Rh ratio of the nanoparticles is found to have a critical influence on observed activity and selectivity, with clear synergistic effects arising from the combination of the noble metal and its 3d congener. In particular, the ability of Co x Rh 100− x @SILP catalysts to hydrogenate 6‐membered aromatic rings is found to experience a remarkable sharp switch in a narrow composition range between Co 25 Rh 75 (full ring hydrogenation) and Co 30 Rh 70 (no ring hydrogenation).

Rengshausen, Simon↗
DOE OSTI2026

Ionic Liquid‐Driven Modulation of DNA Brush Morphology on Nanoparticle Surfaces

Here, the morphology of DNA is strongly influenced by its surrounding environment, including factors such as pH, salt type and valency, and the presence of polymers. Inorganic salts are known to reduce the DNA chain length through mechanisms like electrostatic screening and ion bridging. In contrast, ionic liquids, a new class of organic salts, have previously been found to increase the DNA chain length, indicating a distinct mode of interaction between the ionic liquid and DNA chains. This study utilizes self-assembled DNA-AuNPs as a model system to examine changes in the DNA chain morphology and the nanoscale interaction mechanisms in an ionic liquid environment. The DNA chain lengths are measured in solution using X-ray scattering measurements at varying concentrations of two imidazolium ([$BMIM$] acetate and [$EMIM$] acetate) based ionic liquids. Additionally, Molecular Dynamics (MD) simulations are performed mimicking the experimental system. Our results suggest an interplay of electrostatic and groove-binding interactions governing the DNA chain morphology, which depends on IL concentration and the composition of the DNA chains. It has been found that for DNA chains with majority ssDNA, electrostatic interaction dominate, however with increasing composition of double strands, the DNA chains exhibit compaction due to a non-electrostatic hydrophobic groove-binding mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Spectroscopic and Chemical Properties of Ionic Liquids: Computational Study

A brief account is given of highlights of our computational efforts – often in collaboration with experimental groups – to understand spectroscopic and chemical properties of ionic liquids (ILs). Molecular dynamics, including their inhomogeneous character, responsible for key spectral features observed in dielectric absorption, infra-red (IR) and fluorescence correlation spectroscopy (FCS) measurements are elucidated. Mechanisms of chemical processes involving imidazolium-based ILs are illustrated for CO 2 capture and related reactions, transesterification of cellulose, and Au nanocluster-catalyzed Suzuki cross-coupling reaction with attention paid to differing roles of IL ions. A comparison with experiments is also made.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Radiation Controllable Synthesis of Robust Covalent Organic Framework Conjugates for Efficient Dynamic Column Extraction of 99 TcO4 -

Wang et al. report here an ultra-robust imidazolium-decorated covalent organic framework (COF) conjugate fabricated by an ionizing radiation strategy for efficient capture of 99 TcO 4 -, where tunable ReO 4 - uptake up to 952 mg g -1 can be achieved by simply adjusting the γ-ray dose. The COFs feature high porosity, ultra-robust nanofiber structure, and fast adsorption kinetics, thus emphasizing their advantages in terms of column experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dendrite-free Al recycling via electrodeposition using ionic liquid electrolytes: The effects of deposition temperature and cathode surface roughness

In this report, the electrodeposition of Al from aluminum scrap alloys (A2020) on copper cathode substrates with varied surface roughness under different deposition temperatures was studied using low-temperature AlCl 3 -1-butyl-3-methyl-imidazolium chloride (BMIC) ionic liquid electrolytes. The bulk electrodeposition of Al was carried out under a voltage of 1.5 V at a stirring rate of 120 rpm using a fixed ionic liquid electrolyte concentration (molar ratio AlCl 3 : BMIC = 2:1). The effects of deposition temperature (range from 80 °C to 140 °C) and surface roughness of Cu cathode substrates (polished by 320, 600, 800, 1200 grits SiC sandpapers and mirror polishing process) on the morphology of deposited Al, current density, current efficiency and energy consumption, were investigated. The Al deposits were characterized using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), profilometer, and electrochemical measurements for current density, current efficiency, and energy consumption. It is demonstrated that the deposition temperature and surface roughness of Cu electrodes play a critical role in the nucleation and growth of Al deposits. Higher deposition temperature promotes the diffusion and/or migration of Al 2 Cl 7 - ions and then enhances the current density and efficiency during the electrodeposition of Al. Smoother surface of Cu electrodes is preferred for the formation of dendrite-free Al deposits. Typically, on the mirror polished Cu electrode, no Al dendrite structure was observed, and only plate-like Al deposits were formed at the deposition temperature of 100 °C. Pure metallic Al was successfully deposited on Cu electrodes in AlCl 3 + BMIC ionic liquid electrolytes for all experiments with a current efficiency range from 72% to 99% and energy consumption of 4.6–6.3 kW h/kg Al.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Cosolvent-tuned interactions in ionic liquids: A vibrational and quantum-chemical study of ethylene glycol ratio effects

Ionic liquids (ILs) are attractive media for CO 2 capture but remain limited by viscosity and cost. Blending ILs with ethylene glycol (EG) is a practical route to mitigate these constraints, yet the molecular origins of cosolvent effects and their dependence on composition are not well resolved. We combine Fourier-transform infrared (FT-IR) spectroscopy with quantum-chemical (DFT) analysis to elucidate how the IL:EG molar ratio modulates intermolecular interactions and electronic structure. Computed vibrational frequencies enable mode assignment and deconvolution of overlapping bands, revealing systematic, ratio-dependent shifts and broadenings in (i) EG O–H stretching, (ii) cation and EG C–H stretchings (imidazolium C2–H, C4–H, C5–H, methyl and ethyl groups, -CH2 of EG), (iii) anion signature modes (e.g., CN motifs), and (iv) EG C–O and C–C stretchings, consistent with the redistribution of hydrogen-bonding networks. Molecular electrostatic potential (MESP) maps quantify attenuation of extreme potential regions with increasing EG, indicating progressive screening of cation–anion electrostatic interactions. Quantum Theory of Atoms in Molecules (QTAIM) identifies emergent bond critical points between EG and the IL ions, while Reduced Density Gradient–Noncovalent Interaction (RDG–NCI) analysis differentiates strong directional hydrogen bonds from dispersive contacts across compositions. Together, these results show that EG fraction controls a switch from predominantly ion–ion to mixed ion–EG coordination, altering local polarity and polarizability that underlie the observed FT-IR trends. The framework provides composition–structure–spectrum relationships that can guide rational selection of IL:EG ratios to balance favorable molecular interactions with practical performance targets in scalable CO 2 capture systems.

DAC↗