Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impact phenomena”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Penetration and ricochet phenomena in oblique hypervelocity impact

An experimental investigation of phenomena associated with the oblique hypervelocity impact of spherical projectile on multisheet aluminum structures is described. A model that can be employed in the design of meteoroid and space debris protection systems for space structures is developed. The model consists of equations that relate crater and perforation damage of a multisheet structure to parameters such as projectile size, impact velocity, and trajectory obliquity. The equations are obtained through a regression analysis of oblique hypervelocity impact test data. This data shows that the response of a multisheet structure to oblique impact is significantly different from its response to normal hypervelocity impact. It was found that obliquely incident projectiles produce ricochet debris that can severely damage panels or instrumentation located on the exterior of a space structure. Obliquity effects of high-speed impact must, therefore, be considered in the design of any structure exposed to the meteoroid and space debris environment.

Schonberg, William P.↗
NASA NTRS1993

Effects of hydrodynamics and thermal radiation in the atmosphere after comet impacts

Radiation phenomena in the atmosphere after impacts of cosmic bodies have special features in comparison with the surface nuclear explosions. First, initial concentration of energy after the impact is lower, and second, a wake after the passage of the meteoroid through the atmosphere has a dramatic effect on the atmospheric flow and radiation transfer. Consequently, scaling laws can not be employed for prediction of the flow in the atmosphere and the light flux on the Earth's surface. If a density of high-velocity impactor is low relative to the ground, as in a case of a comet impact on rocks, a major part of the kinetic energy is converted to internal energy of dense hot vapors. But radiation effects can be essential even for fairly low velocities of the impactor. To clarify this issue we have undertaken calculations of 100-Mt explosions at the Earth's surface caused by small comets with velocities from 10 to 70 km/sec. That is, the initial concentration of energy has been varied. The calculations have shown that for velocities of the comet greater or about 20 km/sec a portion of energy emitted from the fireball exceeds 20% of the total energy of the explosion and this quantity does not change very much with the velocity. Other aspects of this investigation are discussed.

Nemchinov, I. V.↗
NASA NTRS2022

Dayside Transient Phenomena and Their Impact on the Magnetosphere and Ionosphere

Dayside transients, such as hot flow anomalies, foreshock bubbles, magnetosheath jets, flux transfer events, and surface waves, are frequently observed upstream from the bow shock, in the magnetosheath, and at the magnetopause. They play a significant role in the solar wind-magnetosphere-ionosphere coupling. Foreshock transient phenomena, associated with variations in the solar wind dynamic pressure, deform the magnetopause, and in turn generates field-aligned currents (FACs) connected to the auroral ionosphere. Solar wind dynamic pressure variations and transient phenomena at the dayside magnetopause drive magnetospheric ultra low frequency (ULF) waves, which can play an important role in the dynamics of Earth’s radiation belts. These transient phenomena and their geoeffects have been investigated using coordinated in-situ spacecraft observations, spacecraft-borne imagers, ground-based observations, and numerical simulations. Cluster, THEMIS, Geotail, and MMS multi-mission observations allow us to track the motion and time evolution of transient phenomena at different spatial and temporal scales in detail, whereas ground-based experiments can observe the ionospheric projections of transient magnetopause phenomena such as waves on the magnetopause driven by hot flow anomalies or flux transfer events produced by bursty reconnection across their full longitudinal and latitudinal extent. Magnetohydrodynamics (MHD), hybrid, and particle-in-cell (PIC) simulations are powerful tools to simulate the dayside transient phenomena. This paper provides a comprehensive review of the present understanding of dayside transient phenomena at Earth and other planets, their geoeffects, and outstanding questions.

Bow shock↗
DOE OSTI2022

Performance evaluation of an industrial ceramic nanofiltration unit for wastewater treatment in oil production

An industrial ceramic nanofiltration membrane (pore size 0.9 nm) was tested in a Canadian oil field for more than 12,500 h to treat wastewater directly from daily operations, without any type of pre-treatment. This wastewater contained a high content of total suspended solids (13 to 510 mg/kg), and total organic carbon (31 to 134 mg/kg). The membrane unit was operated at different transmembrane pressure (TMP) set points (4–16 bar) and recovery set points (40–80%). The data show that ion and compound rejection depend strongly on a combination of both TMP and recovery, with the largest rejection occurring at low recovery values and high TMP values. Two mechanisms were responsible for rejection: sieving, which mostly impacted compound rejection, and electrostatic phenomena that impacted ion rejection. It is shown that ion rejection depends linearly on charge density of the ion. Ion rejection was measured as high as 85% and compounds (such as TSS) were rejected as high as 100%. The specific flux varied between 1–10 L/(m 2 .h.bar). Results from this field testing indicate the possibility of using these types of ceramic membranes for oil field wastewater treatment.

42 ENGINEERING↗
NASA NTRS1987

Impact vaporization: Late time phenomena from experiments

While simple airflow produced by the outward movement of the ejecta curtain can be scaled to large dimensions, the interaction between an impact-vaporized component and the ejecta curtain is more complicated. The goal of these experiments was to examine such interaction in a real system involving crater growth, ejection of material, two phased mixtures of gas and dust, and strong pressure gradients. The results will be complemented by theoretical studies at laboratory scales in order to separate the various parameters for planetary scale processes. These experiments prompt, however, the following conclusions that may have relevance at broader scales. First, under near vacuum or low atmospheric pressures, an expanding vapor cloud scours the surrounding surface in advance of arriving ejecta. Second, the effect of early-time vaporization is relatively unimportant at late-times. Third, the overpressure created within the crater cavity by significant vaporization results in increased cratering efficiency and larger aspect ratios.

Schultz, P. H.↗
DOE OSTI2024

Numerical modelling of impact seismic sources using the stress glut theory

SUMMARY Meteorite impacts have proved to be a significant source of seismic signal on the Moon, and have now been recorded on Mars by InSight seismometers. Understanding how impacts produce seismic signal is key to the interpretation of this unique data, and to improve their identification in continuous seismic records. Here, we use the seismic Representation Theorem, and particularly the stress glut theory, to model the seismic motion resulting from impact cratering. The source is described by equivalent forces, some resulting from the impactor momentum transfer, and others from the stress glut, which represents the mechanical effect of plasticity and non linear processes in the source region. We condense these equivalent forces into a point-source with a time-varying single force and nine-component moment tensor. This analytical representation bridges the gap between the complex dynamics of crater formation, and the linear point-source representation classically used in seismology. Using the multiphysics modelling software HOSS, we develop a method to compute the stress glut of an impact, and the associated point-source from hypervelocity impact simulations. For a vertical and an oblique impact at 1000 m s−1, we show that the moment tensor presents a significant deviatoric component. Hence, the source is not an ideal isotropic explosion contrary to previous assumptions, and draws closer to a double couple for the oblique impact. The contribution of the point force to the seismic signal appears negligible. We verify this model by comparing two signals: (1) HOSS is coupled to SPECFEM3D to propagate the near-source signal elastically to remote seismic stations; (2) the point-source model derived from the stress-glut theory is used to generate displacements at the same distance. The comparison shows that the point-source model is accurately simulating the low-frequency impact seismic waveform, and its seismic moment is in trend with Lunar and Martian impact data. High-frequencies discrepancies exist, which are partly related to finite-source effects, but might be further explained by the difference in mathematical framework between classical seismology and HOSS’ numerical modelling.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Predicting Asteroid Material Properties from a DART-like Kinetic Impact

Abstract NASA’s Double Asteroid Redirection Test (DART) mission is the first full-scale test of the kinetic impactor method for asteroid deflection, in which a spacecraft intentionally impacts an asteroid to change its trajectory. DART represents an important first step for planetary defense technology demonstration, providing a realistic assessment of the effectiveness of the kinetic impact approach on a near-Earth asteroid. The momentum imparted to the asteroid is transferred from the impacting spacecraft and enhanced by the momentum of material ejected from the impact site. However, the magnitude of the ejecta contribution is dependent on the material properties of the target. These properties, such as strength and shear modulus, are unknown for the DART target asteroid, Dimorphos, as well as most asteroids since such properties are difficult to characterize remotely. This study examines how hydrocode simulations can be used to estimate material properties from information available post-impact, specifically the asteroid size and shape, the velocity and properties of the impacting spacecraft, and the final velocity change imparted to the asteroid. Across >300 three-dimensional simulations varying seven material parameters describing the asteroid, we found many combinations of properties could reproduce a particular asteroid velocity. Additional observations, such as asteroid mass or crater size, are required to further constrain properties like asteroid strength or outcomes like the momentum enhancement provided by impact ejecta. Our results demonstrate the vital importance of having as much knowledge as possible prior to an impact mission, with key material parameters being the asteroid’s mass, porosity, strength, and elastic properties.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1966

Momentum Transfer and Cratering Phenomena Associated With the Impact of Aluminum Spheres Into Thick Aluminum Targets at Velocities to 24,000 Feet Per Second

Spheres of 2017-T4 aluminum with diameters of, 1/16, 1/8, and ½ inch were launched into semi-infinite targets of 2024-T4 and 1100-0 aluminum. The momentum transfer during impact was measured by means of a simple ballistic pendulum to which the target was attached. The ratio of target momentum to projectile momentum increased with increasing projectile velocity and with projectile diameter. Mass loss due to cratering, penetration, and crater diameter were also obtained for these experiments. It was noted that the variation of these parameters was also a function of the projectile diameter. No conclusive evidence was uncovered to explain this apparent scale effect. However, close examination of the various craters suggests that the cratering process is, in fact, different for the different size projectiles. The cause for this difference has yet to be resolved.

MOMENTUM TRANSFER↗
DOE OSTI2025

High-Fidelity Modeling of Fuel-To-Coolant Thermomechanical Transport Behaviors Under Transient Conditions

This report summarizes the work completed under NEUP project number 21-24006. The objectives of this project are to advance the high-fidelity modeling capabilities and important phenomena that is important for high-burnup UO 2 and accident tolerant fuels (ATF) during transient conditions. Accurate modeling of the time-dependent phenomena that impact material performance must be used to determine the figures of merit and safety margin. Phenomena such as fuel fragmentation, cladding oxidation, pellet-clad interaction, clad ballooning, and clad rupture are examples that pose challenges to modeling during these transients. This project focused on the development of high-fidelity tightly coupled multiphysics models that can capture the time-dependent material response and associated thermal hydraulic conditions during these events. These models can then be validated against existing separate effects tests and in-pile integral experiments and will be used to model Transient Reactor Test facility (TREAT) loss-of-coolant accidents (LOCA) experiments. To achieve the project objective, we used a combination of NEAMS and NRC codes to model various LOCA test sets for the separate effects and in-pile integral experiments. BlueCRAB tool set, which can accurately predict material response at a sub-fuel pin level, as well as modeling the entire reactor system response to these events. Fuel performance was modeled using BISON (various versions) and FAST (version 1.2.1). BISON and FAST can model on a sub-fuel pin level the fuel performance under transient conditions. Both have simplified thermal hydraulic models that are capable of providing basic coolant boundary conditions. To better capture the thermomechanical interaction between the fuel, clad, and coolant, more sophisticated thermal hydraulic models are necessary.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1972

Lunar microcraters and interplanetary dust.

The ratio of spall to pit diameter of lunar microcraters decreases with decreasing crater size. The trend from micron-sized to cm-sized craters involves a transition of crater types from pit-only to pit-plus-spall craters. Some spall-only craters may have possessed a pit originally. Most microcraters are formed by the impact of primary interplanetary dust particles because melting occurred during their formation. According to experimental and theoretical data such melting phenomena require impact velocities which are consistent only with the velocity distribution of extralunar particles.

Hartung, J. B.↗
NASA NTRS1992

Hypervelocity impact facility for simulating materials exposure to impact by space debris

The Space Power Institute at Auburn University has constructed an electromagnetically driven particle accelerator for simulating the effects of space debris on the materials for use in advanced spacecraft. The facility consists of a capacitively driven accelerator section, a drift tube and a specimen impact chamber. The drift tube is sufficiently long that all electrical activity has ceased prior to impact in the specimen chamber. The impact chamber is large enough to allow a wide range of specimen geometries, ranging from small coupons to active portions of advanced spacecraft. The electric drive for the accelerator consists of a 67 kJ, 50 k capacitor bank arranged in a low inductance configuration. The bank is discharged through an aluminum armature/plastic ablator plate/projectile load in roughly 1.2 microsec. The evaporation of the ablaitor plate produces an expanding gas slug, mostly H2, traveling at a velocity of some 60 km/sec. Because of the pressure and local density, the expanding gas cloud accelerates projectiles due to plasma drag. To date, we have utilized projectiles consisting of 100 micron SiC, 100 and 400 micron Al2O3, 100 and 145 micron olivines. Since many particles are accelerated in a given experiment, there is a range of velocities for each shot as well as some particle breakup. Advanced diagnostics techniques allow determination of impact coordinates, velocity, and approximate size for as many as 50 individual impacts in a given experiment. We routinely measure velocities in the range 1-15 km/sec. We have used this facility to study a variety of impact generated phenomena on coated surfaces, both paint and plastic, thermal blanket material, solar cell arrays, and optical materials such as glass and quartz lenses. The operating characteristics of the gun, the advanced diagnostic scheme, and the results of studies of crater morphology are described in detail. Projectile residue analysis, as a function of impact velocity for the materials listed above, is also discussed. Wherever possible, these results are compared to those obtained by LDEF investigators and future experiments suggested which could help to explain unique features associated with LDEF impacts.

Rose, M. Frank↗
DOE OSTI2025

Microstructure-sensitive mechanical behavior of an additively manufactured psuedoelastic shape memory alloy

The additive manufacturing of shape memory alloys into complex geometries enables fabrication of advanced functional systems across a variety of fields and domains. This work presents results focused on the mechanical behavior of additively manufactured shape memory pseudoelastic NiTi. The deformation induced solid state phase transformation from austenite to martensite allows this system to accommodate large recoverable strains. This deformation behavior is fundamentally driven by crystal-scale transformation physics. Laser powder bed fusion processing reveals that the resulting microstructure, both grain morphology and crystallographic texture, is strongly dependent on the manufacturing processing history. Exhaustive mechanical testing demonstrates that these microstructural factors strongly impact both tensile and cyclic stress–strain behavior. Cyclic dissipative behavior, however, is similar across all tested microstructures following an initial transient period. Remarkably, analysis of spatial strain fields during tensile loading reveals two distinctly different localization “modes”. The first is initiation of localized deformation bands which continuously propagate through the tensile bar during loading. In the second mode localization is observed but lacks propagation; instead additional localization cites nucleate during subsequent loading. The latter phenomena is suspected to be driven by grain-scale deformation physics as the localized band morphologies coincide with grain morphologies. These phenomena strongly impact the resulting aggregate stress–strain behavior. Hence, manufacturers and designers of psuedoelastic functional components must at the very least consider the potential variability in properties when considering additive manufacturing processing. More ideally the process–structure–property relations can be used to further tailor and optimize final functional performance.

Additive manufacturing↗
NASA NTRS2010

Stability of Basalt plus Anhydrite plus Calcite at HP-HT: Implications for Venus, the Earth and Mars

"Canali" observed at Venus surface by Magellan are evidence for very long melt flows, but their composition and origin remain uncertain. The hypothesis of water-rich flow is not reasonable regarding the temperature at Venus surface. The length of these channels could not be explained by a silicate melt composition but more likely, by a carbonate-sulfate melt which has a much lower viscosity (Kargel et al 1994). One hypothesis is that calcite CaCO3 and anhydrite CaSO4 which are alteration products of basalts melted during meteorite impacts. A famous example recorded on the Earth (Chicxulub) produced melt and gas rich in carbon and sulfur. Calcite and sulfate evaporites are also present on Mars surface, associated with basalts. An impact on these materials might release C- and S-rich melt or fluid. Another type of planetary phenomenon (affecting only the Earth) might provoke a high pressure destabilization of basalt+anhydrite+calcite. Very high contents of C and S are measured in some Earth s magmas, either dissolved or in the form of crystals (Luhr 2008). As shown by the high H content and high fO2 of primary igneous anhydrite-bearing lavas, the high S content in their source may be explained by subduction of an anhydrite-bearing oceanic crust, either directly (by melting followed by eruption) or indirectly (by release of S-rich melt or fluid that metasomatize the mantle) . Calcite is a major product of oceanic sedimentation and alteration of the crust. Therefore, sulfate- and calcite-rich material may be subducted to high pressures and high temperatures (HP-HT) and release S- and C-rich melts or fluids which could influence the composition of subduction zone lavas or gases. Both phenomena - meteorite impact and subduction - imply HP-HT conditions - although the P-T-time paths are different. Some HP experimental/theoretical studies have been performed on basalt/eclogite, calcite and anhydrite separately or on a combination of two. In this study we performed piston-cylinder experiments at 1 GPa between 950 and 1700 C using a mixture of 70wt% tholeiitic basalt + 15wt% anhydrite + 15wt% calcite. Up to ~1440 C, an ultracalcic (CaO>13.5 wt%; CaO/Al2O3>1 wt%) picrobasaltic (SiO2~40-45 wt%; Na2O+K2O<2 wt%) melt containing up to 5 wt% SO3 and up to 5.3 wt% CO2+H2O (calculated by difference) is present in equilibrium with clinopyroxene, anhydrite, spinel-chromite, a CAS-phase and a gas composed mainly of CO and an aliphatic thiol (CH2)4SH. Hydrogen was incorporated either by contact between the starting material and air or by diffusion through the capsule during the experiments. The S content in the gas increases with temperature and run duration, implying that gases with various C/S ratios might be released during an impact or at subduction zones, depending on the P-T-t path and on the H content. Above approx.1440 C, a Ca-rich carbonate-sulfate melt forms (in equilibrium with the picrobasaltic melt) which contains a few percents of Na and K. Such melt is not expected to form at Earth s subduction temperatures. If it forms by meteorite impact, it might crystallize too fast to explain long flows like Venus canali. A different basalt/anhydrite/calcite ratio might, however, decrease its formation temperature.

Martin, A. M.↗
DOE OSTI2021

Amphiphile conformation impacts aggregate morphology and solution structure across multiple lengthscales

Although the self-assembly of amphiphiles is well-studied in aqueous solutions, much less is understood about the fundamental driving forces and structure property relationships in non-polar media. In recent work [Journal of Physical Chemistry B, 2020, 124, 10822.] the authors have studied a series of malonomide-based amphiphiles that are relevant to liquid-liquid extraction. That work demonstrated that aggregation is largely driven by local dipole-dipole interactions between molecules. Here, we build upon this observation to develop a more detailed understanding of how the balance of dipole-dipole interactions (controlled by conformation) and molecular architecture influences the morphology of the aggregates across lengthscales. Using constrained molecular dynamics about key degrees of freedom, we demonstrate that the conformation of N,N-dimethyl,N,N-dioctylhexylethoxy malonamide (DMDOHEMA) and N,N-dimethyl,N,N-dibutyltetradecyl malonamide (DMDBTDMA) has a significant impact upon self-association - where appropriate conformational sampling is essential. To quantify the aggregate morphology, several graph theoretic and persistent homology based properties are determined. The former examines the patterns of intermolecular interactions within clusters, while the latter examines the 3-dimensional spatial distribution. Based upon these analyses, we find that the morphology of aggregates, particularly at higher malonamide concentration, depends on a balance of dipole alignment and alkyl tail sterics. Dipole alignment encourages linear patterns of the intermolecular interactions within aggregates, while the alkyl tail steric interactions between the malonamide result in noticeably less linear aggregates for DMDOHEMA than DMDBTDMA. This is reflected in the spatial distribution, where more holes or voids exist between extractants within the DMDOHEMA that distribute within the solution in more of a "swiss cheese" arrangement as opposed to the more filamentous distribution of DMBDTDMA. This study links conformation and molecular structure to the morphology of amphiphile assemblies, and serves as a basis for ongoing study of multicomponent amphiphile solutions with polar and other solutes, and how these impact aggregation phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Roles of Mn and Co in the Air Synthesizability of Layered Oxide Cathodes for Lithium-Based Batteries

High-nickel layered oxides (LiNi 1-x-y Mn x Co y O 2 ) are the prevailing cathode materials for high-energy-density lithium-based batteries, but they are plagued with deleterious surface air instabilities stemming from residual lithium formation. These issues severely hinder mass production as cathode calcination is limited to a flowing oxygen atmosphere, which entails high manufacturing costs as opposed to simpler and more economical air calcination. Here, while higher Ni contents are known to worsen air instabilities, the influence of Mn and Co contents on impacting these phenomena are less elucidated. We herein present the synthesis in ambient air and flowing oxygen atmospheres of three cathode variants with the same Ni contents, but varying Mn and Co contents: LiNi 0.7 Mn 0.3 O 2 , LiNi 0.7 Mn 0.15 Co 0.15 O 2 , and LiNi 0.7 Co 0.3 O 2 . It is found that the critical parameter influencing the air stability of the cathodes is the average Ni oxidation state, which is greatly dependent on the Mn and Co contents. Substitution of Mn for Ni drives down the Ni oxidation state as Mn exists as Mn4 + and reduces surface residual lithium formation, which vastly improves the overall air stability and, therefore, the synthesizability in air, but with a penalty of lowered capacity. In contrast, substitution of Co for Ni maintains Ni 3+ as Co exists as Co 3+ , offering increased initial capacity, but worsens the air stability and cyclability as the driving force for residual lithium formation and surface reactivity is increased.

25 ENERGY STORAGE↗