SEARCH · Search NASA

Results for “Interfacial modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Effect of Co-Reactants on Interfacial Oxidation in Atomic Layer Deposition of Oxides on Metal Surfaces

We have examined the ALD of Al 2 O 3 using TMA as the precursor and t-BuOH and H 2 O as the co-reactants, focusing on the effects of the latter on both the ALD process and the possible modification of the underlying substrate. We have employed a quartz-crystal microbalance (QCM) to monitor ALD in situ and in real-time, and the deposited thin films have been characterized using X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and X-ray reflectivity. Growth of thin films of Al 2 O 3 using TMA and either t-BuOH or H 2 O as the co-reactant at T = 285 °C produces thin films of similar physical properties (density, stoichiometry, minimal carbon incorporation), and the growth rate per cycle is similar for the two co-reactants at this temperature. At a lower temperature of T = 120 °C, the behavior is starkly different, where growth occurs with H 2 O but not with t-BuOH. At either process temperature, we find no evidence for significant coverages of a long-lived tert-butoxy species from the reaction of t-BuOH. Deposition of thin films of Al 2 O 3 on metal surfaces of Cu and Co has been examined for evidence of interfacial oxidation. While growth with either co-reactant does not lead to the oxidation of the underlying Cu substrate, use of H 2 O leads to the oxidation of Co, while use of t-BuOH as the co-reactant does not. Thermodynamic factors may affect early stages of growth as Al species will likely scavenge all free O species. In contrast, at later times diffusion of species through the deposited Al 2 O 3 thin film could result in oxidation at the Al 2 O 3 |metal interface, a process that is strongly hindered in the case of t-BuOH due to its size. Furthermore, this observation highlights the importance of the choice of the co-reactant concerning ALD of oxides on metal surfaces.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Interfacial oxide and other species in trimethylaluminum-pretreated atomic layer deposition-Al 2 O 3 /GaN characterized by sputter-assisted ToF-SIMS

Deposition techniques, like atomic layer deposition (ALD), are used to form high-quality dielectrics for GaN-based metal–oxide–semiconductor (MOS) gate structures due to the lack of a reliable thermal oxide in GaN. Moreover, interfacial GaO x from pre-existing native oxides is thought to adversely impact channel carrier dynamics and induce undesired threshold voltage shifts in GaN-based MOS gate structures. Exposure of the GaN surface to the trimethylaluminum (TMA) precursor prior to standard alumina ALD decreases the native oxide layer on GaN, but the extent of chemical modification has not been well studied in the context of interface composition in a MOS gate structure. Herein, we compare annealed 55 nm Al 2 O 3 dielectric films on GaN grown using either a water-first ALD process or a process including sequential pulses of TMA immediately before the initiation of Al 2 O 3 ALD. Time-of-Flight Secondary Ion Mass Spectrometry measures differences in the interfacial GaO x content between each ALD film. Here, it also detects surface contaminant species like Si, F, S, and C. Furthermore, we report the formation of an AlN species at the Al 2 O 3 /GaN interface, which is more prominent for the film grown using the TMA pre-pulse step. In general, this work demonstrates that the TMA pre-pulse step is an effective strategy for cleaning substrate surfaces prior to ALD.

Atomic layer deposition↗

DOE OSTI2023

Interfacial engineering via laser ablation for high-performing PEM water electrolysis

A rationalized interfacial design strategy was applied to tailor the porous transport layer (PTL)-catalyst layer (CL) contact and the PTL bulk-phase architecture. Particularly, at the PTL-CL interface, our results reveal that laser ablated sintered titanium power-based PTLs improve electrolyzer performance at both the H2NEW Consortium baseline catalyst loading of 0.4 mgIr cm -2 as well as at the ultra-low catalyst loading of 0.055 mgIr cm -2 . Under ultra-low catalyst loadings, the laser ablated PTL demonstrates maximum reduction of 230 mV compared to the commercial PTL at 4 A cm -2 , and reduces by 68 mV at 3.2 A cm -2 under H2NEW baseline loading. Laser ablation alters the titanium phase at the interface, so it forms more uniform structure like a microporous layer or a backing layer, leading to an increase in the surface area in contact with the catalyst layer while preventing the membrane from deforming into the PTL. Moreover, we reveal that bulk-phase architecture modification of the PTL by ablating patterned pores at the flow field-PTL interface improves mass transport without sacrificing contact at the CL-PTL interface. Overall, laser ablation of the PTL is an effective method to customize interfacial design to enhance proton exchange membrane electrolyzer performance.

08 HYDROGEN↗

DOE OSTI2024

Hydrolysis-Induced Morphology Evolution of Linear and Bottlebrush Block Copolymers in Thin Films with Acid Vapor or Photoacid Generators

The self-assembly of high-χ low-N block copolymers (BCPs) can give patterns with sub-10 nm full pitch, serving as a promising alternative to photolithographic methods. Here, in this work, we synthesized poly(solketal methacrylate)-block-polystyrene copolymers, PSM-b-PS, with various volume ratios of the two blocks. After hydrolysis of the PSM block into poly(glycerol monomethacrylate), PGM, the BCPs had both lamellar and cylindrical microdomain morphologies in the bulk phase and in thin films. In addition to our previously developed solid-state hydrolysis strategy involving trifluoroacetic acid vapor, we developed a new photoinduced solid-state hydrolysis using photoacid generators, PAGs, embedded within the polymer films. After exposure to UV followed by a postexposure baking or solvent vapor annealing, the BCPs transitioned from the disordered, phase-mixed state into laterally ordered cylindrical patterns. In comparison to linear BCPs that rely on a random copolymer layer to modify interfacial interactions with the substrate to promote an orientation of the microdomains normal to the interface, we found that the microdomains in bottlebrush multiblock copolymers oriented normal to the interface absent substrate modification due to the chain architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Electrolyte design for LiF-rich solid–electrolyte interfaces to enable high-performance microsized alloy anodes for batteries

Lithium batteries with Si, Al or Bi microsized (>10 µm) particle anodes promise a high capacity, ease of production, low cost and low environmental impact, yet they suffer from fast degradation and a low Coulombic efficiency. In this paper, we demonstrate that a rationally designed electrolyte (2.0 M LiPF 6 in 1:1 v/v mixture of tetrahydrofuran and 2-methyltetrahydrofuran) enables 100 cycles of full cells that contain microsized Si, Al and Bi anodes with commercial LiFePO 4 and LiNi 0.8 Co 0.15 Al 0.05 O 2 cathodes. Alloy anodes with areal capacities of more than 2.5 mAh cm -2 achieved >300 cycles with a high initial Coulombic efficiency of >90% and average Coulombic efficiency of >99.9%. These improvements are facilitated by the formation of a high-modulus LiF–organic bilayer interphase, in which LiF possesses a high interfacial energy with the alloy anode to accommodate plastic deformation of the lithiated alloy during cycling. Lastly, this work provides a simple yet practical solution to current battery technology without any binder modification or special fabrication methods.

25 ENERGY STORAGE↗

DOE OSTI2020

Variation of sign and magnitude of the Dzyaloshinskii-Moriya interaction of a ferromagnet with an oxide interface

We demonstrate that both the magnitude and sign of the Dzyaloshinskii-Moriya interaction can be tuned by modifying the type and thickness of an oxide layer adjacent to a ferromagnet. In this work, we focus on Ti/Cu/Co 90 Fe 10 /Ta($d_{\text{Ta}}$)/Oxide/Ta structures, where the Ta interlayer thickness $d_{\text{Ta}}$ ranged from 0 nm to 3 nm, followed by an exposure to oxygen and “Oxide” can mean CoFeO x and/or TaO x . We used Brillouin light scattering spectroscopy to directly determine the volume-averaged Dzyaloshinskii-Moriya interaction from the nonreciprocity of the spin-wave frequency. The magnitude of the interfacial Dzyaloshinskii-Moriya interaction, $D_{\text{DMI}}$, ranges from – 0.17 to +0.09(±0.02) mJ/m 2 , clearly showing a change in both sign and magnitude, with an increase of Ta interlayer thickness. The modification of the oxide interface allows us to systematically change the hybridization of the 3$\textit{d}$–CoFe orbitals from 3$\textit{d}$–5$\textit{d}$ to 3$\textit{d}$–2$\textit{p}$ and analyze the influence on the Dzyaloshinskii-Moriya interaction. Importantly, we can vary the Dzyaloshinskii-Moriya interaction while maintaining a relatively small value of the damping parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li⁺-conducting cathode-electrolyte interphase

Ni-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes are investigated to realize high energy density Li ion batteries for long life electric vehicle applications. However, capacity decay and thermal instability due to cathode-electrolyte interfacial degradation remain challenges that require sophisticated surface stabilization methods to address. Here, we propose a strategy, for the first time, to form an artificial Li + -conducting cathode-electrolyte interphase (ALCEI) on the NCM811 cathode surface using a nucleophilic reaction between polysulfides and vinylene carbonate (VC). Furthemore, the as-formed ALCEI layer simultaneously protects the NCM particles from electrolyte corrosion and facilitates Li + ion transport, thus enabling stable and high rate cycling of NCM811. As a result, the ALCEI-modified NCM811 cathode exhibits a high capacity (211.6 mA h g -1 at 0.1C), notable rate capability (134 mA h g -1 at 10C), and superior cycle stability (94.2% over 200 cycles at 1C). These results underscore the use of interfacial engineering in high voltage cathode material development and provide a feasible strategy for stabilizing Ni-rich cathode interfaces in practical Li ion battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Interface Modifications of Lithium Metal Anode for Lithium Metal Batteries

Lithium metal batteries (LMBs) enable much higher energy density than lithium–ion batteries (LIBs) and thus hold great promise for future transportation electrification. However, the adoption of lithium metal (Li) as an anode poses serious concerns about cell safety and performance, which has been hindering LMBs from commercialization. To this end, extensive effort has been invested in understanding the underlying mechanisms theoretically and experimentally and developing technical solutions. In this review, we devote to providing a comprehensive review of the challenges, characterizations, and interfacial engineering of Li anodes in both liquid and solid LMBs. Finally, we expect that this work will stimulate new efforts and help peer researchers find new solutions for the commercialization of LMBs.

25 ENERGY STORAGE↗

DOE OSTI2024

Interfacial engineering for high performance carbon-based perovskite solar cells

Perovskite solar cells fabricated with carbon-based counter electrodes demonstrate decreased cost, enhanced simplicity and speed of production, and increased stability compared to those produced with standard metallic electrodes. This significant improvement of device stability, cost reduction, and production scalability indicates a promising direction for commercial development and availability of perovskite solar technology. The main limitation of carbon-based perovskite devices is the flawed contact between the carbon electrode and perovskite film which decreases device quality and performance, thereby necessitating treatment of the carbon/perovskite interface. This review provides an overview of the current state of carbon-based perovskite devices, discusses progress in carbon/perovskite interface modification methods, and suggests future directions for the research of carbon electrode/perovskite film interface manipulation.

14 SOLAR ENERGY↗

DOE OSTI2024

Engineered Water for Improved Oil Recovery from Fractured Reservoirs (Final Scientific/Technical Report)

The goal of this proposal is to field test the novel technology of engineered water (modifying ionic composition and/or adding surfactants or nanoparticles) injection to improve oil recovery from the carbonate matrix in fractured reservoirs. Carbonate reservoirs tend to be oil-wet/mixed-wet due to positively charged carbonate mineral surfaces and negatively charged acidic/asphaltic components in the oil. Many carbonate reservoirs are also highly fractured. Water injection does not work efficiently in fractured oil-wet reservoirs because water does not imbibe into the matrix. The water composition can be engineered with ionic modification, surfactants and nanoparticles which can change the wettability of carbonate rocks towards more water-wet conditions which can imbibe water into the matrix and push the oil into the fractures. The engineered water can also lower interfacial tension and minimize capillary forces so that gravity can push the oil up and out of the matrix. Wettability alteration also increases water relative permeability which can also improve oil recovery in non-fractured carbonate reservoirs. This technology, if successful, can be a game changer for West Texas carbonates.

02 PETROLEUM↗

DOE OSTI2022

The Roles of Interface, Adherend, and Adhesive in Plasma- and Other-treated Joints of Metals and FRP Materials Under Shear Deformation

This work investigated the role of interface, adherend, and adhesive in adhesively-bonded metal-metal, metal-CFRTP, and CFRTP-CFRTP combinations with plasma-treated surfaces under shear deformation. To this end, aluminum alloys (AA5052 and AA6061) and short-carbon-fiber-reinforced polyamide 66 (CFRPA66) were used as examples and performed through single lap shear testing. The results showed that air plasma surface treatment can improve the shear behavior of adhesively-bonded AA5052-CFRPA66 and CFRPA66-CFRPA66 joints with about 20% enhanced lap shear strength compared to non-treated cases. Failure surface morphology of plasma-treated CFRPA66 adherend confirmed this improvement by showing an increased amount of adhesive failure than interfacial failure between CFRPA66 and adhesive. But this is not true for AA5052-AA6061 joints with plasma-treated surfaces exhibiting almost no enhanced lap shear strength. This study also showed the importance of selecting a proper surface modification method for the enhancement of adhesive-bonded structures under shear deformation through the analysis of the results in this study and in the literature. For fiber-reinforced polymers (FRPs), improving FRP/adhesive interface may be prioritized via different surface modification methods (e.g., plasma, chemical coating, etc.) than adhesive modification methods. However, for surface-cleaned metals, toughening adhesive via different enhancement methods (e.g., nano-particles, chemical enhancement, etc.) may be more important than improving metal/adhesive interface. These insightful results are valuable in the area of multi-materials joining.

Qiao, Yao↗

DOE OSTI2021

Effect of the Segmental Structure of Thermoplastic Polyurethane (Hardness) on the Interfacial Adhesion of Textile-Grade Carbon Fiber Composites

In polymer composites, the fiber–matrix interface is primarily influenced by the surface treatment of the fibers and polymer morphology. Previous studies have investigated the effect of surface treatment of carbon fiber on the mechanical properties of the resulting composites. However, very few studies have explored the chemical structural modification of polymer effect on the fiber–matrix adhesion. In this work, the interfaces of soft thermoplastic polyurethane (S-TPU) and hard-segmented TPU (H-TPU) were investigated through surface, thermal, and mechanical characterization. A textile-grade carbon fiber (TCF) with 1% concentration of epoxy sizing (an emerging material for nonaerospace applications with 450 K filament tows) was used as a reinforcement to investigate the structure–property relationship at the interface. Atomic force microscopy results showed 39% higher surface roughness for S-TPU than for H-TPU. X-ray photoelectron spectroscopy results revealed a 550% increase in C=O content, which can provide multiple hydrogen bonding networks in H-TPU, and these C=O bonds can produce a strong chemical bond at the fiber–matrix interface. Additionally, dynamic mechanical analysis and differential scanning calorimetry results confirmed the presence of hydrogen bonding that enhances the cross-linked density by 232% in H-TPU compared to S-TPU. The improved mechanical properties of H-TPU composites, such as flexural, impact and tensile by 30, 50, and 130% compared to S-TPU composites, prove that the crystallinity and hydrogen bonding significantly increase the load bearing capacity due to the strong interface. The mechanical properties of TCF–TPU composites validate the formation of chemical bonds through a nucleophilic addition reaction at the interface and improve the bond strength of the composites. Thus, tailoring the polyurethane structure broadens the performance of segmented TPU in conjunction with TCF reinforcement, which has implications for cost-effective, high-strength composites.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Interfacial Charge Transfer in Lead Sulfide/Cadmium Sulfide Quantum Dot–Monolayer Molybdenum Disulfide Heterostructures

We investigate the ultrafast interfacial charge transfer dynamics in mixed-dimensional PbS/CdS quantum dot (QD)–monolayer MoS 2 heterostructures exhibiting a type-II band alignment. These 0D–2D heterostructures were assembled using oleic acid-capped PbS/CdS QDs with systematically varied core sizes deposited onto molecular beam epitaxy-grown monolayer MoS 2 . Steady-state and time-resolved optical spectroscopies revealed pronounced bidirectional charge transfer between the 0D and 2D components, involving both electron and hole exchange across the interface. The quenching of the monolayer MoS 2 A-exciton bleach and the modifications of its decay dynamics provide direct evidence for efficient hole transfer from photoexcited MoS 2 into the PbS QD core. Concurrently, attenuation of the QD ground-state bleach and the emergence of ultrafast decay components confirmed electron transfer from photoexcited QDs to monolayer MoS 2 . Both hole and electron transfer processes are dependent on the QD core size, with smaller cores enabling faster transfer rates and higher efficiencies due to enhanced band offsets and interfacial coupling. The complementary insights gained from transient absorption and time-resolved photoluminescence measurements clarify the mechanisms governing interfacial carrier exchange and highlight the importance of both hole and electron transfer as key components in the functioning of such 0D–2D heterostructures. This study underscores the potential of 0D–2D semiconductor heterostructures for advanced optoelectronic and light-energy conversion applications.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Phase Stability and Electrochemical Performance of La-Site-Doped Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 High-Entropy Garnets

We investigate La-site substitution in the high-entropy garnet Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 (LLZNTH) using Ba2+, Sr2+, and Sm3+ to elucidate how dopant governs phase stability, Li-site distribution, and electrochemical behavior. X-ray diffraction shows that Sr2+ is incorporated homogeneously into the garnet lattice, whereas the larger Ba2+ and smaller Sm3+ ions partially exceed the structural tolerance, generating secondary phases. Nevertheless, the Sm-doped composition (x = 0.05) exhibits the highest room-temperature ionic conductivity (2.7 × 10–4 S cm–1). Neutron powder diffraction reveals that Sm substitution drives a redistribution of Li+ from the tetrahedral 24 d sites into the higher-mobility 96 h positions, enhancing the connectivity of the three-dimensional Li-ion migration network. A Sm-doping series (x = 0.01–0.05) further shows that only sufficiently high Sm levels induce this redistribution, whereas lower concentrations retain Li arrangements similar to the undoped garnet. Critical current density measurements demonstrate that La-site dopants also influence interfacial stability against Li metal, underscoring a trade-off between bulk transport enhancement and mechanical robustness. Collectively, these findings reveal that in high-entropy garnets improved ionic conductivity can originate not only from phase-pure structures but also from targeted modification of the Li sublattice, even when accompanied by secondary phases, offering a compositional design principle for garnet electrolytes.

Li, Chang [Mechanical Engineering, School of Scien↗

DOE OSTI2019

Influence of Surface Ligands on Energetics at FASnI 3 /C 60 Interfaces and Their Impact on Photovoltaic Performance

Interfacial chemistry and energetics significantly impact the performance of photovoltaic devices. In the case of Pb-containing organic metal halide perovskites, photoelectron spectroscopy has been used to determine the energetic alignment of frontier electronic energy levels at various interfaces present in the photovoltaic device. For the Sn-containing analogues, which are less toxic, no such measurements have been made. Through a combination of ultraviolet, inverse, and X-ray photoelectron spectroscopy (UPS, IPES, and XPS, respectively) measurements taken at varying thickness increments during stepwise deposition of C 60 on FASnI 3 , we present the first direct measurements of the frontier electronic energy levels across the FASnI 3 /C 60 interface. The results show band bending in both materials and transport gap widening in FASnI 3 at the interface with C 60 . The XPS results show that iodide diffuses into C 60 and results in n-doping of C 60 . This iodide diffusion out of FASnI 3 impacts the valence and conduction band energies of FASnI 3 more than the core levels, with the core level shifts displaying a different trend than the valence and conduction bands. Surface treatment of FASnI 3 with carboxylic acids and bulky ammonium substituted surface ligands results in slight alterations in the interfacial energetics, and all surface ligands result in similar or improved PV performance relative to the untreated devices. Finally, the greatest PV stability results from treatment with a fluorinated carboxylic acid derivative; however, iodide diffusion is still observed to occur with this surface ligand.

interfacial energetics↗

DOE OSTI2026

Quantitative Analysis of the Semiconductor–Electrolyte Interface Using Cyclic Voltammetry Measurements

Small changes in the chemical potential at a semiconductor interface can result in dramatic changes to the space-charge layer that underpins applications in the electronic and photovoltaic industries as well as in photoelectrochemical cells for fuel production. There has hence been great interest in techniques that directly probe the space-charge layer, yet many fail at the semiconductor–electrolyte interface due to the potential drop in the electric double-layer region of the electrolyte. This article demonstrates that photovoltages, obtained from straightforward cyclic voltammetry measurements, provide an experimental and quantitative approach for characterizing the semiconductor–electrolyte interface. Key parameters accessible through this approach include the flat-band potential ( E fb ), the fraction of the total potential that drops across the space-charge layer (γ sc ) and the electric double layer, as well as the surface recombination lifetime (τ s ). Here, we report photovoltage measurements for p -type Si(111) photoelectrodes in contact with electrolytes containing redox-active species with a range of known reduction potentials that exceed the 1.1 eV bandgap. In tetrabutylammonium [NBu 4 ] + electrolyte, the flat-band potential determined for hydrogen-terminated ( p -Si–H), methyl-terminated ( p -Si–CH 3 ), and chemically oxidized ( p -Si–cSiO x ) surfaces were −0.02, −0.31, and 0.30 V vs Fc +/0 , respectively, agreeing well with expected shifts arising from surface dipole modifications. The quantitative analysis also reveals that 67% of the applied bias drops across the space-charge layer for p -Si–H, 73% for p -Si–CH 3 , and only 44% for p -Si–cSiO x . The remaining potential drop is attributed to the interfacial surface layer, which consists of a molecular dipole or oxide overlayer, and the Helmholtz layer within the electrolyte. When the larger [NBu 4 ] + electrolyte was replaced with Li + , the flat-band position showed minimal changes, but the fraction of the potential drop across the space-charge layer increased significantly, consistent with the small cation altering the structure of the electric double layer.

electrolytes↗

DOE OSTI2020

Tuning the Anode–Electrolyte Interface Chemistry for Garnet-Based Solid-State Li Metal Batteries

Lithium (Li) metal anode is a promising candidate for high energy density solid-state batteries. However, the interface issues, including large interfacial resistance and Li dendrite generation, have always frustrated the attempt to commercialize solid-state Li metal batteries (SSLBs). Here, we report that infusing the garnet-type solid electrolytes (GSEs) with air-stable electrolyte Li 3 PO 4 (LPO) dramatically reduces the interfacial resistance to ~1 Ω cm 2 and achieves a high critical current density of 2.2 mA cm -2 under ambient condition due to enhanced interfacial stability to Li metal anode. The coated and infused LPO electrolytes not only improve the mechanical strength and Li-ion conductivity of grain boundaries, but also form a stable Li-ion conductive but electron-insulating LPO-derived solid-electrolyte interphase between Li metal and GSEs, and consequently eliminates the Li dendrites growth and prevents the direct reduction of GSEs by Li metal over a long cycle life. This interface engineering approach together with grain-boundary modification on GSEs represents a promising strategy to revolutionize the anode-electrolyte interface chemistry for SSLBs and provides new design strategy for other-types of solid-state batteries.

25 ENERGY STORAGE↗

DOE OSTI2024

Factors influencing quantum evaporation of helium from polar semiconductors from first principles

While there is much indirect evidence for the existence of dark matter (DM), to date it has evaded detection. Current efforts focus on DM masses over ~GeV—to push the sensitivity of DM searches to lower masses, new DM targets and detection schemes are needed. In this work, we focus on the latter—a novel detection scheme recently proposed to detect 10–100 meV phonons in polar target materials. Previous work showed that well-motivated models of DM can interact with polar semiconductors to produce an athermal population of phonons. This new sensing scheme proposes that these phonons then facilitate quantum evaporation of 3 He from a van der Waals film deposited on the target material. However, a fundamental understanding of the underlying process is still unclear, with several uncertainties related to the precise rate of evaporation and how it can be controlled. In this work, we use ab initio density functional theory calculations to compare the adsorption energies of helium atoms on a polar target material, sodium iodide, to understand the underlying evaporation physics. We explore the role of surface termination, monolayer coverage, and elemental species on the rate of He evaporation from the target material. Using this, we discuss the optimal target features for He-evaporation experiments and their range of tunability through chemical and physical modifications such as applied field and surface termination.

36 MATERIALS SCIENCE↗