Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interpretive analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Urban air quality estimation study, phase 1

Possibilities are explored for applying estimation theory to the analysis, interpretation, and use of air quality measurements in conjunction with simulation models to provide a cost effective method of obtaining reliable air quality estimates for wide urban areas. The physical phenomenology of real atmospheric plumes from elevated localized sources is discussed. A fluctuating plume dispersion model is derived. Individual plume parameter formulations are developed along with associated a priori information. Individual measurement models are developed.

Diamante, J. M.↗
NASA NTRS1985

Preliminary report on tests of tensile specimens with a part-through surface notch for a filament wound graphite/epoxy material

The behavior of tensile coupons with surface notches of various semi-elliptical shapes were evaluated for specimens obtained from a filament wound graphite/epoxy cylinder. The quasi-static test results, in some instances, are inadequate for defining complete trend curves and the interpretive analysis is considered to be preliminary. Specimens with very shallow notches were observed to be notch insensitive and the unnotched strength from these specimens was determined to be 54.97 Ksi. The failure strain of the laminate was found to be 1.328%. Specimens with deeper notches were sensitive to notch depth, notch aspect ratio, and specimen width. Using the unnotched strength of 54.97 Ksi and Poe's general toughness parameter, the fracture toughness was estimated to be 27.2 Ksi square root of In. Isotropic linear elastic fracture mechanics together with the estimated fracture toughness correctly predicted the influence of notch depth, aspect ratio, and specimen finitewidth.

Harris, C. E.↗
NASA NTRS1987

Evidence for large-scale winds from starburst galaxies. I - The nature of the ionized gas in M82 and NGC 253

The results of long-slit spectroscopy and narrow-band imaging of M82 and NGC 253, the two nearest examples of FIR luminous galaxies believed to be undergoing intense bursts of star formation, are presented. The profile of the gas pressure in the emission-line filaments in M82 is derived and found to be in good agreement with the model of Chevalier and Clegg (1985) of a supernovae-driven wind from a starburst nucleus. Lower quality data from NGC 253 support the same interpretation. Analysis of the emission-line ratios suggests that the line-emitting gas may be heated by low-velocity shocks, although photoionization from dilute UV radiation from unusually hot stars in the central starburst may also be important.

Mccarthy, Patrick J.↗
NASA NTRS1988

Digital enhancement of flow field images

Most photographs of experimentally generated fluid flow fields have inherently poor photographic quality, specifically low contrast. Thus, there is a need to establish a process for quickly and accurately enhancing these photographs to provide improved versions for physical interpretation, analysis, and publication. A sequence of digital image processing techniques which have been demonstrated to effectively enhance such photographs is described.

Kudlinski, Robert A.↗
NASA NTRS1995

Ground-based grasslands data to support remote sensing and ecosystem modeling of terrestrial primary production

Estimating terrestrial net primary production (NPP) using remote-sensing tools and ecosystem models requires adequate ground-based measurements for calibration, parameterization, and validation. These data needs were strongly endorsed at a recent meeting of ecosystem modelers organized by the International Geosphere-Biosphere Program's (IGBP's) Data and Information System (DIS) and its Global Analysis, Interpretation, and Modelling (GAIM) Task Force. To meet these needs, a multinational, multiagency project is being coordinated by the IGBP DIS to compile existing NPP data from field sites and to regionalize NPP point estimates to various-sized grid cells. Progress at Oak Ridge National Laboratory (ORNL) on compiling NPP data for grasslands as part of the IGBP DIS data initiative is described. Site data and associated documentation from diverse field studies are being acquired for selected grasslands and are being reviewed for completeness, consistency, and adequacy of documentation, including a description of sampling methods. Data are being compiled in a database with spatial, temporal, and thematic characteristics relevant to remote sensing and global modeling. NPP data are available from the ORNL Distributed Active Archive Center (DAAC) for biogeochemical dynamics. The ORNL DAAC is part of the Earth Observing System Data and Information System, of the US National Aeronautics and Space Administration.

Olson, R. J.↗
NASA NTRS1999

Automated Testing Experience of the Linear Aerospike SR-71 Experiment (LASRE) Controller

System controllers must be fail-safe, low cost, flexible to software changes, able to output health and status words, and permit rapid retest qualification. The system controller designed and tested for the aerospike engine program was an attempt to meet these requirements. This paper describes (1) the aerospike controller design, (2) the automated simulation testing techniques, and (3) the real time monitoring data visualization structure. Controller cost was minimized by design of a single-string system that used an off-the-shelf 486 central processing unit (CPU). A linked-list architecture, with states (nodes) defined in a user-friendly state table, accomplished software changes to the controller. Proven to be fail-safe, this system reported the abort cause and automatically reverted to a safe condition for any first failure. A real time simulation and test system automated the software checkout and retest requirements. A program requirement to decode all abort causes in real time during all ground and flight tests assured the safety of flight decisions and the proper execution of mission rules. The design also included health and status words, and provided a real time analysis interpretation for all health and status data.

Larson, Richard R.↗
NASA NTRS2000

ISS Microgravity Environment Monitoring System (MEMS): System Design - Part 1

The Principal Investigator Microgravity Services project at the NASA Glenn Research center supports Principal Investigators of the microgravity science community as they evaluate the effects of acceleration on their experiments. The Principal Investigator Microgravity Services' primary responsibility is to support NASA sponsored investigators in the area of acceleration data analysis, interpretation and the monitoring of the microgravity environment on-board various carriers. The microgravity environment is a rich and very complex dynamic one. It is subject to quasi-steady accelerations, higher frequency acceleration, and transient disturbances. With the advent of the International Space Station operation, a significant amount of data is expected to be downlinked and processed for both the space station microgravity environment characterization (verification) and scientific experiments. Therefore, to help principal investigator teams monitor the microgravity environment on-board the International Space Station in order to avoid negative impact on their experiment, when possible, the NASA Glenn Principal Investigator Microgravity Services project is currently developing an artificial intelligence monitoring system, which will notify the principal investigator teams in near real time of any change in the microgravity environment susceptible to affect their experiments.

Jules, Kenol↗
NASA NTRS2002

Contrast and harmonic imaging improves accuracy and efficiency of novice readers for dobutamine stress echocardiography

BACKGROUND: Newer contrast agents as well as tissue harmonic imaging enhance left ventricular (LV) endocardial border delineation, and therefore, improve LV wall-motion analysis. Interpretation of dobutamine stress echocardiography is observer-dependent and requires experience. This study was performed to evaluate whether these new imaging modalities would improve endocardial visualization and enhance accuracy and efficiency of the inexperienced reader interpreting dobutamine stress echocardiography. METHODS AND RESULTS: Twenty-nine consecutive patients with known or suspected coronary artery disease underwent dobutamine stress echocardiography. Both fundamental (2.5 MHZ) and harmonic (1.7 and 3.5 MHZ) mode images were obtained in four standard views at rest and at peak stress during a standard dobutamine infusion stress protocol. Following the noncontrast images, Optison was administered intravenously in bolus (0.5-3.0 ml), and fundamental and harmonic images were obtained. The dobutamine echocardiography studies were reviewed by one experienced and one inexperienced echocardiographer. LV segments were graded for image quality and function. Time for interpretation also was recorded. Contrast with harmonic imaging improved the diagnostic concordance of the novice reader to the expert reader by 7.1%, 7.5%, and 12.6% (P < 0.001) as compared with harmonic imaging, fundamental imaging, and fundamental imaging with contrast, respectively. For the novice reader, reading time was reduced by 47%, 55%, and 58% (P < 0.005) as compared with the time needed for fundamental, fundamental contrast, and harmonic modes, respectively. With harmonic imaging, the image quality score was 4.6% higher (P < 0.001) than for fundamental imaging. Image quality scores were not significantly different for noncontrast and contrast images. CONCLUSION: Harmonic imaging with contrast significantly improves the accuracy and efficiency of the novice dobutamine stress echocardiography reader. The use of harmonic imaging reduces the frequency of nondiagnostic wall segments.

Non-NASA Center↗
NASA NTRS2018

Overview of Solar-Induced Chlorophyll Fluorescence (SIF) from the Orbiting Carbon Observatory-2: Retrieval, Cross-Mission Comparison, and Global Monitoring for GPP

The Orbiting Carbon Observatory-2 (OCO-2), launched in July 2014, is capable of measuring Solar-Induced chlorophyll Fluorescence (SIF), a functional proxy for terrestrial gross primary productivity (GPP). Although its primary mission is to measure the column-averaged mixing ratio of CO2 (Xco(sub 2)) to constrain global carbon source/sink distribution, one of the OCO-2 spectrometers allows for a robust SIF retrieval solely based on solar Fraunhofer lines. Here we present a technical overview of the OCO-2 SIF product, aiming to provide the scientific community guidance on best practices for data analysis, interpretation, and application. This overview consists of the retrieval algorithms, OCO-2 specific bias correction, retrieval uncertainty evaluation, cross-mission comparison with other existing SIF products, and a global-scale examination of the SIF-GPP relationship. With the initial three years of data (September 2014 onward), we compared OCO-2 SIF with retrievals from Greenhouse Gases Observing Satellite (GOSAT) and Global Ozone Monitoring Experiment-2 (GOME-2), and examined its relationship with FLUXCOM and MODIS GPP datasets. Our results show that OCO-2 SIF, along with GOSAT products, closely resemble the mean spatial and temporal patterns of FLUXCOM GPP from regions to the globe. Compared with GOME-2, however, OCO-2 depicts a more realistic spatial contrast between the tropics and extra-tropics. The linear relationship between OCO-2 SIF and existing modeled GPP products diverges somewhat across biomes at the global scale, consistent with previous GOSAT or GOME-2 based findings when modeled GPP products were used, but in contrast to a consistent cross-biome SIF-GPP relationship obtained at flux tower sites with OCO-2 products. This contrast suggests a critical need to reconcile differences in diverse SIF and GPP products and the relationships among them. Overall, the OCO-2 SIF products are robust and valuable for monitoring the global terrestrial carbon cycle and for constraining the carbon source/sink strengths of the Earth system. Finally, insights are offered for future satellite missions optimized for SIF retrievals.

GPP↗
NASA NTRS2023

First VLTI/GRAVITY Observations of HIP 65426 b: Evidence for a Low or Moderate Orbital Eccentricity

Giant exoplanets have been directly imaged over orders of magnitude of orbital separations, prompting theoretical and observational investigations of their formation pathways. In this paper, we present new VLTI/GRAVITY astrometric data of HIP 65426 b, a cold, giant exoplanet which is a particular challenge for most formation theories at a projected separation of 92 au from its primary. Leveraging GRAVITY's astrometric precision, we present an updated eccentricity posterior that disfavors large eccentricities. The eccentricity posterior is still prior dependent, and we extensively interpret and discuss the limits of the posterior constraints presented here. We also perform updated spectral comparisons with self-consistent forward-modeled spectra, finding a best-fit ExoREM model with solar metallicity and C/O = 0.6. An important caveat is that it is difficult to estimate robust errors on these values, which are subject to interpolation errors as well as potentially missing model physics. Taken together, the orbital and atmospheric constraints paint a preliminary picture of formation inconsistent with scattering after disk dispersal. Further work is needed to validate this interpretation. Analysis code used to perform this work is available on GitHub: https://github.com/sblunt/hip65426.

Sarah Blunt↗
NASA NTRSDate not supplied

Performance Risk Model Validation with Operationally Relevant Tasks

Human Research Program aims to develop methods to support astronauts’ health and productivity during spaceflight. The Crew Health and Performance Probabilistic Risk Assessment (CHP-PRA) team uses powerful computational methods to predict mission risk in both domains: medical and performance. Here, we show how CHP-PRA uses the Performance Risk Model (PRisM) to quantify the performance risk and show an application of the model on operationally relevant tasks. There are various metrics adopted across performance researchers that PRisM can accommodate. For data analysis, interpretation, and integration, we use a method of unifying data from multiple sources by converting each to a single metric. We consult subject matter experts prior to integrating the converted data into PRisM. The method we use is inspired by the Cooper-Harper rating scale [1]. Using this unified metric, we can easily combine data from various tests and lab groups. We explain our conversion method in detail and show how it pertains to the process of testing and validation of PRisM on operational tasks. We conducted an initial validation in collaboration with the Behavioral Health and Performance (BHP) lab. We test PRisM using data on their operationally relevant task ROBoT-r, a track-and-capture task for grappling incoming resupply vehicles [2]. Several other labs at NASA Johnson Space Center worked together to design 7 Functional Task Tests (FTTs) in pursuit of simulating the tasks required after landing on a planetary surface and after return to Earth [3]. Here we use the results from both ROBoT-r and the 7 FTTs and compare their experiment data to PRisM’s computational output to demonstrate how PRisM can support operations by predicting crew performance on future missions.

performance modeling↗
NASA NTRS1969

Structural Analysis and Matrix Interpretive System /SAMIS/

SAMIS digital computer program simplifies automated structural analysis and eliminates reprogramming for problem changes. Program objectives are achieved by standardizing, by providing a modular program, and by programming for intermediate-size problems.

Source record↗
NASA NTRS1995

Scientific visualization tools for the ISTP project: Mission planning, data analysis and model interpretation

Visualization tools are being developed to meet the challenges of mission planning and data analysis presented by the International Solar-Terrestrial Physics (ISTP) program. ISTP encompasses a large number of spacecraft, multiple ground-based observatories, and several theoretical investigations, with the goal of understanding the global behavior of the solar wind/magnetosphere/ionosphere system. The tools include three-dimensional displays of key boundaries in geospace along with spacecraft trajectories, which can be animated and synchronized to universal time. Magnetic field models and MHD simulation results can be invoked to reveal the magnetic topology or to identify magnetic conjunctions between spacecraft and/or ground-based facilities. Simultaneous displays of satellite trajectories, spacecraft-borne observations, and model predictions are available to facilitate data processing and interpretation efforts. The current status of these tools is described, and their implementation at the ISTP Science Planning and Operations Facility and distribution to the entire ISTP community are discussed.

Peredo, M.↗
NASA NTRS2000

Postural control model interpretation of stabilogram diffusion analysis

Collins and De Luca [Collins JJ. De Luca CJ (1993) Exp Brain Res 95: 308-318] introduced a new method known as stabilogram diffusion analysis that provides a quantitative statistical measure of the apparently random variations of center-of-pressure (COP) trajectories recorded during quiet upright stance in humans. This analysis generates a stabilogram diffusion function (SDF) that summarizes the mean square COP displacement as a function of the time interval between COP comparisons. SDFs have a characteristic two-part form that suggests the presence of two different control regimes: a short-term open-loop control behavior and a longer-term closed-loop behavior. This paper demonstrates that a very simple closed-loop control model of upright stance can generate realistic SDFs. The model consists of an inverted pendulum body with torque applied at the ankle joint. This torque includes a random disturbance torque and a control torque. The control torque is a function of the deviation (error signal) between the desired upright body position and the actual body position, and is generated in proportion to the error signal, the derivative of the error signal, and the integral of the error signal [i.e. a proportional, integral and derivative (PID) neural controller]. The control torque is applied with a time delay representing conduction, processing, and muscle activation delays. Variations in the PID parameters and the time delay generate variations in SDFs that mimic real experimental SDFs. This model analysis allows one to interpret experimentally observed changes in SDFs in terms of variations in neural controller and time delay parameters rather than in terms of open-loop versus closed-loop behavior.

NASA Program Biomedical Research and Countermeasur↗
NASA NTRS1980

Ion microprobe analysis and petrogenetic interpretations of Li, Mg, Ti, K, Sr, Ba in lunar plagioclase

The ion microprobe employed in the considered investigation utilizes a focused primary ion beam to sputter a tiny volume of a sample. A small fraction of the sputtered atoms is ionized and extracted from the sample region for subsequent analysis with a mass spectrometer. A systematic study was conducted to determine which elements can be detected and analyzed in lunar Ca-rich plagioclase. Attention is given to the method of quantitative determination, the selected samples, and aspects of data presentation. A number of general conclusions are discussed. All minor elements in plagioclases from anorthosites from several lunar sites show a restricted range consistent with a common origin. The simplest interpretation is that the anorthosites developed from a moon-wide event, or at least from closely-related events. A moon-wide magma ocean would satisfy this condition.

Steele, I. M.↗
NASA NTRS1982

Interpretation methodology and analysis of in-flight lightning data

A methodology is presented whereby electromagnetic measurements of inflight lightning stroke data can be understood and extended to other aircraft. Recent measurements made on the NASA F106B aircraft indicate that sophisticated numerical techniques and new developments in corona modeling are required to fully understand the data. Thus the problem is nontrivial and successful interpretation can lead to a significant understanding of the lightning/aircraft interaction event. This is of particular importance because of the problem of lightning induced transient upset of new technology low level microcircuitry which is being used in increasing quantities in modern and future avionics. Inflight lightning data is analyzed and lightning environments incident upon the F106B are determined.

Rudolph, T.↗
NASA NTRS1978

Analysis and geological interpretation of gravity data from GEOS-3 altimeter

A number of detailed gravimetric geoids of portions of the world's oceans from marine gravity measurements were constructed. The geoids were constructed by computing 1 x 1 deg or 10 x 10 deg averages of free-air anomaly data and subtracting these values from currently used satellite derived Earth models. The resulting difference gravity anomalies are then integrated over a sphere using a simplified form of Stoke's equation to obtain a difference geoid. This difference geoid is added to the satellite derived model to obtain a 1 x 1 deg or 10 x 10 deg total gravimetric geoid. The geoid undulations are studied by comparison of the altimeter measurements with the morphology of the ocean floor. Utilizing a combination of altimetry data, gravity and seismic reflection data, geophysical models of the earth can be constructed.

Talwani, M.↗