Search NASA⌕ Search

SEARCH · Search NASA

Results for “KRYPTON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Squeezing the box: isoreticular contraction of pyrene-based linker in a Zr-based metal–organic framework for Xe/Kr separation

Isoreticular synthesis is a powerful tool to enhance specific attributes of a metal–organic framework (MOF). While the isoreticular expansion of MOF structure are prevalent in the literature, the compression of a topology holds great promise for separations due to the contracted pore apertures and/or cavities. Herein, we report the synthesis, characterization and Xe/Kr separation capability of a new Zr-based MOF, NU-1106, connected by the tetratopic linker 1,3,6,8-pyrene tetracarboxylate, which exhibits a compressed ftw topology compared to the extended ones reported previously. NU-1106 showed selective uptake of Xenon over Krypton, providing the potential for use for separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Order-of-magnitude laser imprint reduction using pre-expanded high-Z coatings on targets driven by a third harmonic Nd:glass laser

A hybrid early time x-ray drive followed by conventional laser direct drive obtained by utilizing a thin high-Z overcoat on plastic ablator targets has proven to be very effective at reducing laser imprint in experiments driven by the Nike krypton-fluoride laser. An inherent low level laser prepulse from that laser system heated and expanded the coating prior to the main pulse. Here, we report on results using a frequency tripled Nd:glass laser system (Omega EP) where the inherent prepulse was several orders of magnitude smaller. By applying a separate prepulse, these experiments allowed us to test if the prepulse is important for mitigating imprint with the high-Z layer. The results show that the high-Z coating is much more effective at reducing laser imprint when it is pre-expanded, in this case, by an externally generated low level soft x-ray prepulse of ∼10 J/cm2. With the x-ray prepulse, laser imprint at spatial wavelengths below 100 μm was reduced by an order of magnitude, similar to that observed with the laser prepulse on Nike. Furthermore, the experiments here establish that high-Z coating is effective in reducing imprint even in the case of a fixed speckle pattern. Rayleigh–Taylor-amplified laser imprint and high-Z layer dynamics were measured using through-foil and side-on x-ray radiography. Pre-expansion times from 30 down to 6 ns were effective, potentially compatible with laser prepulse generation using existing NIF and OMEGA front ends; however, temporal beam smoothing appears to be necessary for the laser prepulse that directly illuminates the high-Z coating. The highest imprint reduction is observed for Pd and Au coatings of at least 400 Å thickness; thicknesses down to 200 Å show a reduction in imprint with an adjusted prepulse.

Karasik, Max (ORCID:0000000162354670)↗
DOE OSTI2023

The importance of laser wavelength for driving inertial confinement fusion targets. II. Target design

We describe details of radiation-hydrodynamics simulations of directly driven targets for inertial confinement fusion using laser drivers with different laser wavelengths. Of particular interest here are comparisons of frequency-tripled glass (laser wavelength 351 nm) lasers with the argon fluoride (193 nm) and krypton fluoride (248 nm) excimer lasers and the effects that these laser wavelengths have on the target designs. We explore the effect these drivers have on the compromise involved between lowering laser plasma instabilities (LPIs) or hydrodynamic instabilities while providing high gains and seek to quantify this trade-off. Short-wavelength drivers have significant advantages, primarily in using less power and energy to drive targets. Additionally, they expand the allowed operating regime that is constrained by LPI avoidance and the production of higher pressures needed for more hydrodynamically stable targets. Potential disadvantages to shorter drive wavelengths, such as increased imprint, are examined and found to be unimportant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Multiplexed structured imaging of laser induced fluorescence at 10 GHz rate

The frame rate of conventional high-speed imaging devices is limited by exposure time and signal read-out time. Structured imaging is able to push the frame rate beyond the limit of the imaging device. This work demonstrates the feasibility of potential TeraHz rate structured imaging with a multiplexed structured imaging setup. In this work, a multiplexed structured image capture system was employed to image UV laser induced krypton-II emission lines at 10 GHz. The measured emission intensity of the 764 nm line over time suggests a temporal resolution of 97 ps. The temporal resolution is adjustable, and the frame rate can be further increased to the TeraHz level.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Quantifying fission yields at the National Ignition Facility using depleted uranium foil experiments

There are programs for high-Z shell experiments at the National Ignition Facility (NIF). For shells made of actinide material, a quantitative fission diagnostic is needed in order to determine how much fission took place and whether the fission was sufficient to produce a non-negligible heat source in the burning capsule. Here, we present a viable coupled experimental and theoretical technique for making quantitative fission measurements possible. The proposed scheme involves using a well-characterized set of depleted uranium foils outside an NIF capsule to verify the conversion of xenon and krypton fission fragments collected at the Radiochemical Analysis of Gaseous Samples (RAGS) facility into total fission yield. We present the calculations needed for this conversion, including the decays in and out of fission fragment chains during the RAGS pump-down of the NIF chamber.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Measurements of the electron energy distribution function in partially magnetized low temperature plasmas

While Langmuir probes (LPs) are relatively simple and inexpensive plasma diagnostics for the electron density, temperature, and the electron energy distribution function (EEDF), the interpretation of the measured current–voltage (I–V) characteristic is complicated considerably by the presence of a magnetic field. In regimes where the electron gyroradius is comparable to the probe radius, the electron flux to the probe surface is retarded by reduced mobility across field lines and can no longer be described by a thermal model. Predicting the current collected by the probe in these regimes requires accurate estimates of the plasma diffusion coefficients, which are usually difficult to obtain. In this work, we measure electron energy distribution functions in E×B plasmas with magnetized electrons and non-magnetized ions in argon and krypton gases, using both a LP and laser Thomson scattering (LTS) at various magnetic fields. Using the LTS measurements to provide a robust benchmark for comparison, we compare existing theories describing the flux to the probe under magnetized conditions. We find that even when the electron gyroradius associated with the effective electron temperature is small compared to the probe radius, the EEDF computed using classical probe theory is still robust at energies higher than the energy at which the gyroradius becomes larger than the probe size. For plasmas that are not strongly non-Maxwellian, we formulate a method to extract robust density and temperature measurements using physics-informed fitting techniques to analyze EEDFs computed using classical theory.

Devin, E. G. [Princeton Plasma Physics Laboratory ↗
DOE OSTI2020

Planar multifrequency mid-IR microwave-pumped lasers

The characteristics of planar repetitively pulsed diffusion-cooled HF, DF, HF – DF, Xe, and HF – DF – Xe(Kr) lasers pumped by a microwave discharge (2.45 GHz) are studied depending on the pump pulse duration (10 – 40 μs) and repletion rate (50 – 400 Hz), as well as on the composition and pressure of the working gas mixture (30 – 200 Torr) at low (to 0.6 L s{sup −1}) gas flow rates. It is demonstrated for the first time that a HF – DF – Xe gas-discharge laser may simultaneously operate as a HF – DF chemical molecular laser and a recombination laser based on xenon atom transitions and generate broadband (octave) radiation in the range 2.0 – 4.2 μm with an average output power of 43 mW and an efficiency of 0.9 %. With substitution of xenon for krypton, lasing in a HF – DF – Kr laser is obtained at wavelengths of 2.52 – 4.15 μm. Lasing in a HF – DF laser was achieved simultaneously in two spectral regions (2.7 – 2.9 and 3.6 – 4.2 μm) with an output power of ∼50 mW. It is found that a decrease in the pump pulse duration with a simultaneous increase in the pulse repletion rate for retaining the average energy deposition leads to an increase in the average output power and efficiency of the laser. At low pulse repetition rates (50 – 100 Hz) and a low gas mixture flow rate, helium buffer gas can be effectively substituted for neon. Operation of the Xe laser was achieved in the spectral range 2.03 – 3.65 μm with an average output power of 580 Mw at a pump pulse duration of 20 μs, a pulse repetition rate to 10 kHz, and a maximum efficiency of 55 %. The obtained experimental results demonstrate the possibility of creating broadband HF – DF – Xe lasers emitting in the frequency range 2 – 4 μm with a desired ratio of intensities in different spectral ranges. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Influence of Surfactants on Noble Metal Liquid-Gas Interface Mass Transfer in Molten Salt Reactors

Noble metals, a group of insoluble fission products (FPs), can accumulate in molten salt reactors (MSRs) and influence system performance and safety through deposition. Upon generation in fission, noble metals are transported by circulating salt and may either deposit on structural surfaces or enter the circulating gas bubble interfaces. While sparging was primarily designed for xenon and krypton removal, the mass transfer of noble metals into bubble interfaces highlights a potential pathway for their transport and partial extraction. The properties of the liquid-gas interface therefore play an important role in noble metal deposition and removal behaviors. Observations from earlier studies suggest that noble metals accumulated at the bubble interface can act as surfactants, making the bubble interface partially immobile. This behavior reduces the mass transfer capacity of circulating bubbles and affects both the overall distribution of noble metals in the loop and their removal efficiency. To investigate the influence of surfactants on noble metal transport, deposition, and extraction behaviors in MSRs, a previously developed and validated species transport model incorporating noble metal interphase mass transfer was used to simulate these behaviors. Two designed cases were studied to predict the distribution of 132Te along the Molten Salt Reactor Experiment (MSRE) loop under different bubble interface conditions. The results show that the mass transfer coefficients at the liquid-gas interface, determined by bubble interface characteristics, significantly influence noble metal distribution within the reactor loop. These findings emphasize the importance of continuously introducing fresh circulating bubbles into the molten salt to improve the removal efficiency of insoluble FPs from the MSR primary loop.

MSR↗
DOE OSTI2024

Characterizing the negative triangularity reactor core operating space with integrated modeling

Negative triangularity (NT) has received renewed interest as a fusion reactor regime due to its beneficial power-handling properties, including low scrape-off layer power and a larger divertor wetted area that facilitates simple divertor integration. NT experiments have also demonstrated core performance on par with positive triangularity (PT) high confinement mode (H-mode) without edge-localized modes (ELMs), encouraging further study of an NT reactor core. In this work, we use integrated modeling to scope the operating space around two NT reactor strategies. The first is the high-field, compact fusion pilot plant concept Modular, Adjustable, NT ARC (MANTA) and the second is a low field, high aspect ratio concept based on work by Medvedev et al. By integrating equilibrium, core transport, and edge ballooning instability models, we establish a range of operating points with less than 50 MW scrape-off layer power and fusion power comparable to PT H-mode reactor concepts. Heating and seeded impurities are leveraged to accomplish the same fusion performance and scrape-off layer exhaust power for various pressure edge boundary conditions. Scans over these pressure edge conditions accommodate any current uncertainty of the properties of the NT edge and show that the performance of an NT reactor will be extremely dependent on the edge pressure. The high-field case is found to enable lower scrape-off layer power because it is capable of reaching high fusion powers at a relatively compact size, which allows increased separatrix density without exceeding the Greenwald density limit. Adjustments in NT shaping exhibit small changes in fusion power, with an increase in fusion power density seen at weaker NT. Infinite-n ballooning instability models indicate that an NT reactor core can reach fusion powers comparable to leading PT H-mode reactor concepts while remaining ballooning-stable. Seeded krypton is leveraged to further lower scrape-off layer power since NT does not have a requirement to remain in H-mode while still maintaining high confinement. We contextualize the NT reactor operating space by comparing to popular PT H-mode reactor concepts, and find that NT exhibits competitive ELM-free performance with these concepts for a variety of edge conditions while maintaining relatively low scrape-off layer power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

The Auger Radioisotope Microscope: an instrument for characterization of Auger electron multiplicities and energy distributions

We describe a new instrument, the Argonne Auger Radioisotope Microscope (ARM), capable of characterizing the Auger electron (AE) emission of radionuclides, including candidates relevant in nuclear medicine. Our approach relies on event-by-event ion–electron coincidence, time-of-flight, and spatial readout measurement to determine correlated electron multiplicity and energy distributions of Auger decays. We present a proof-of-principle measurement with the ARM using x-ray photoionization of stable krypton beyond the K-edge and identify a bifurcation in the electron multiplicity distribution depending on the emission of K-LX electrons. Extension of the ARM to the characterization of radioactive sources of AE emissions is enabled by the combination of two recent developments: (1) cryogenic buffer gas beam technology to introduce Auger emitters into the detection region with well-defined initial conditions, and (2) large-area micro-channel plate detectors with multi-hit detection capabilities to simultaneously detect multiple electrons emitted in a single decay.

Auger emitters↗
DOE OSTI2024

First tungsten radiation studies in DIII-D’s ITER baseline demonstration discharges

Abstract ITER Baseline Scenario plasmas were studied in DIII-D using krypton and xenon gases as a proxy for the tungsten that will be present in ITER. These impurities were chosen for having the same radiative loss rate Lz as tungsten would exhibit in the hotter ITER core. Results show that the scenario with these core radiators spans the range of impurity concentration and W radiated fraction expected for ITER, and up to 50% higher values, explored at zero injected torque, as well as 1 Nm and full co-torque injection with T ∼ 3 Nm. Stationary discharges with duration >2–4 τ R are achieved with f rad ⩾ 30% leading to a reduction in confinement of ∼10%, and a comparison with real metal radiators in the same range of f rad shows that the higher Lz at the lower temperatures in these plasmas yields too pessimistic results on the survivability and performance of this scenario in ITER. Simulations of ITER power balance including W radiation show that with concentration up to three times higher than in the DIII-D plasmas the scenario can be stationary, remaining at acceptable core radiated fraction values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Fluorescence time profile measurement of LAB based liquid scintillator in response to medium relativistic ion particles

Liquid scintillator is widely used in particle physics experiments due to its high light yield, good timing resolution, scalability and low cost. Certain liquid scintillators exhibit pulse shape discrimination capabilities because of difference in fluorescence timing properties induced by different particles. Its fluoresence timing properties have been measured mostly for radioactive decay sources at MeV energies. Here, we present a novel measurement of fluorescence time properties of Linear Alkyl Benzene (LAB) based liquid scintillator in response to high-energy ions of hydrogen (Z = 1), helium (Z = 2) and krypton at around 200–300 MeV/u for the first time. We compared the results to those from radioactive sources and observed a distinct dE / dX dependence, regardless of the particle type. These findings are essential for physics searches such as the diffuse supernova neutrino background in large liquid scintillator detectors like JUNO, and are also critical towards understanding the underlying scintillation timing mechanism.

Ion identification systems↗
DOE OSTI2020

Direct drive with the argon fluoride laser as a path to high fusion gain with sub-megajoule laser energy

Argon fluoride (ArF) is currently the shortest wavelength laser that can credibly scale to the energy and power required for high gain inertial fusion. ArF's deep ultraviolet light and capability to provide much wider bandwidth than other contemporary inertial confinement fusion (ICF) laser drivers would drastically improve the laser target coupling efficiency and enable substantially higher pressures to drive an implosion. Our radiation hydrodynamics simulations indicate gains greater than 100 are feasible with a sub-megajoule ArF driver. Our laser kinetics simulations indicate that the electron beam-pumped ArF laser can have intrinsic efficiencies of more than 16%, versus about 12% for the next most efficient krypton fluoride excimer laser. We expect at least 10% ‘wall plug' efficiency for delivering ArF light to target should be achievable using solid-state pulsed power and efficient electron beam transport to the laser gas that was demonstrated with the U.S. Naval Research Laboratory's Electra facility. These advantages could enable the development of modest size and lower cost fusion power plant modules. This would drastically change the present view on inertial fusion energy as being too expensive and the power plant size too large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Stellar s-process neutron capture cross sections on 78,80,84,86 Kr determined via activation, atom trap trace analysis and decay counting

We present a detailed account of neutron capture experiments of astrophysical relevance on 78,80,84,86 Kr (n, γ) reactions at the border between weak and main s process. The experiments were performed with quasi-Maxwellian neutrons from the Liquid-Lithium Target (LiLiT) and the mA-proton beam at 1.93 MeV (2-3 kW) of the Soreq Applied Research Accelerator Facility (SARAF). The setup yields high-intensity approximate to 40 keV quasi-Maxwellian neutrons (3-5 x10 10 n/s) closely reproducing the conditions of s-process stellar nucleosynthesis. A sample of 100 mg of atmospheric, pre-nuclear-age Kr gas contained in a Ti spherical shell was activated in the LiLiT neutron field. The abundances of long-lived Kr isotopes ( 81,85g Kr) were measured by atom counting via atom trap trace analysis (ATTA) at Argonne National Laboratory and low-level counting (LLC) at University of Bern. This work is the first measurement of a nuclear cross section using atom counting via ATTA. The activities of short-lived Kr isotopes ( 79,85m,87 Kr) were measured by gamma-decay counting with a high-purity germanium detector. Maxwellian-averaged cross sections for s-process thermal energies are extracted. By comparison to reference values, our nucleosynthesis network calculations show that the experimental cross sections have a strong impact on calculated abundances of krypton and neighboring nuclides, in some cases improving agreement between theory and observations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Production of the most neutron-deficient Zn isotopes by projectile fragmentation of Kr 78

The cross sections for the production of three most neutron-deficient zinc isotopes, 54–56 Zn, in the projectile fragmentation of 78 Kr at 345 MeV/nucleon on a beryllium target, were measured. Although the results are smaller by over an order of magnitude from those obtained with a 58 Ni beam at 75 MeV/nucleon on a nickel target, the rates of reaction products are found to be larger in the case of high-energy fragmentation of 78 Kr. The experimental cross sections for the most neutron-deficient isotopes of even-Z nuclei between zinc and krypton were analyzed in the framework of the abrasion-ablation model. A very good agreement with the data was found when the nuclear masses predicted by a particular variant of the Hartree-Fock-Bogoliubov mass model were used. The prospects for the observation of more exotic isotopes in this region are discussed in context of 2p radioactivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Two-Center Interference in the Photoionization Delays of Kr 2

Herein we present the experimental observation of two-center interference in the ionization time delays of Kr 2 . Using attosecond electron-ion-coincidence spectroscopy, we simultaneously measure the photoionization delays of krypton monomer and dimer. The relative time delay is found to oscillate as a function of the electron kinetic energy, an effect that is traced back to constructive and destructive interference of the photoelectron wave packets that are emitted or scattered from the two atomic centers. Our interpretation of the experimental results is supported by solving the time-independent Schrödinger equation of a 1D double-well potential, as well as coupled-channel multiconfigurational quantum-scattering calculations of Kr 2 . This work opens the door to the study of a broad class of quantum-interference effects in photoionization delays and demonstrates the potential of attosecond coincidence spectroscopy for studying weakly bound systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Transfer Learning of High-Fidelity Opacity Spectra in Autoencoders and Surrogate Models

Simulations of high energy density physics are expensive, largely in part for the need to produce nonlocal thermodynamic equilibrium opacities. High-fidelity spectra may reveal new physics in the simulations not seen with low-fidelity spectra, but the cost of these simulations also scales with the level of fidelity of the opacities being used. Neural networks are capable of reproducing these spectra, but neural networks need data to train them, which limits the level of fidelity of the training data. Here this article demonstrates that it is possible to reproduce high-fidelity spectra with median errors in the realm of 3%–4% using as few as 50 samples of high-fidelity Krypton data by performing transfer learning on a neural network trained on many times more low-fidelity data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Novel complex ceramic oxides, Ln 2 TiO 5 (Ln = La, Sm, Gd, Tb, Dy, Ho, Er, and Yb), for polyphase nuclear waste‐forms

Abstract As part of a broader study of ceramic nuclear waste‐forms, four different lanthanide titanates were fabricated; La 0.1 Sm 0.1 Gd 0.1 Tb 0.1 Dy 0.3 Ho 0.1 Er 0.2 YbTiO 5 , Sm 0.3 Gd 0.3 Dy 0.3 Yb 1.1 TiO 5 , Sm 0.1 Gd 0.4 Dy 0.4 Yb 1.1 TiO 5 , and Sm 0.2 Gd 0.2 Dy 0.2 Yb 1.4 TiO 5 . The aim was to produce single‐phase novel materials with cubic symmetry, capable of incorporating a wide variety of cations and with acceptable radiation tolerance. The chemistry flexibility and radiation tolerance are some of the major desirable properties for nuclear waste‐form materials. By using multiple lanthanides the average lanthanide radius can be controlled and consequently the structure, along with properties such as radiation tolerance. The radiation tolerance was assessed using in situ 1 MeV krypton irradiation and transmission electron microscopy characterization. Those materials for which cubic symmetry was achieved displayed better radiation tolerance; a greater critical fluence of ions ( F c ) was required for the crystalline to amorphous transition, and a lower temperature was required to maintain crystallinity ( T c ) during irradiation.

Aughterson, Robert D.↗