Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetic Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Design and application of a kinetic model of lipid metabolism in Saccharomyces cerevisiae

Lipid biosynthesis plays a vital role in living cells and has been increasingly engineered to overproduce various lipid-based chemicals. However, owing to the tightly constrained and interconnected nature of lipid biosynthesis, both understanding and engineering of lipid metabolism remain challenging, even with the help of mathematical models. Here we report the development of a kinetic metabolic model of lipid metabolism in Saccharomyces cerevisiae that integrates fatty acid biosynthesis, glycerophospholipid metabolism, sphingolipid metabolism, storage lipids, lumped sterol synthesis, and the synthesis and transport of relevant target-chemicals, such as fatty acids and fatty alcohols. The model was trained on lipidomic data of a reference S. cerevisiae strain, single knockout mutants, and lipid overproduction strains reported in literature. The model was used to design mutants for fatty alcohol overproduction and the lipidomic analysis of the resultant mutant strains coupled with model-guided hypothesis led to discovery of a futile cycle in the triacylglycerol biosynthesis pathway. In addition, the model was used to explain successful and unsuccessful mutant designs in metabolic engineering literature. Thus, this kinetic model of lipid metabolism can not only enable the discovery of new phenomenon in lipid metabolism but also the engineering of mutant strains for overproduction of lipids.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Experimental and Kinetic Modeling Study of 3-Methyl-2-butenol (Prenol) Oxidation

Longer chain alcohols with 4–5 carbon atoms are attractive alternative fuels as they can be derived from biological sources and since their combustion leads to lower exhaust gas levels of NO x and soot compared to commercial fossil fuels. The auto-ignition behavior of fuels that contain both a hydroxyl group and a C=C double bond in their molecular structure is not well established in the literature. Understanding the influence of these functional groups on the ignition behavior of fuels is critical in the development of tailor-made fuels for advanced combustion engines. In this study, ignition delay times of an unsaturated alcohol, 3-methyl-2-butenol (prenol), are measured using a high-pressure shock tube and a rapid compression machine at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 in “air” in the temperature range 600–1400 K. Furthermore, a detailed kinetic model is developed and validated using the new experimental data in this study. In addition, speciation data in a jet-stirred reactor, ignition delay times, and laminar burning velocities available in the literature were also used to validate the new kinetic model. Fuel flux and sensitivity analyses are performed using this new model to determine the important fuel consumption pathways and critical reactions that affect the reactivity of prenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An experimental and kinetic modeling study of NO x sensitization on methane autoignition and oxidation

An experimental and kinetic modeling study of the influence of NO x (i.e. NO 2 , NO and N 2 O) addition on the ignition behavior of methane/‘air’ mixtures is performed. Ignition delay time measurements are taken in a rapid compression machine (RCM) and in a shock tube (ST) at temperatures and pressures ranging from 900–1500 K and 1.5–3.0 MPa, respectively for equivalence ratios of 0.5–2.0 in ‘air’. The conditions chosen are relevant to spark ignition and homogeneous charge compression ignition engine operating conditions where exhaust gas recirculation can potentially add NO x to the premixed charge. The RCM measurements show that the addition of 200 ppm NO 2 to the stoichiometric CH 4 /oxidizer mixture results in a factor of three increase in reactivity compared to the baseline case without NOx for temperatures in the range 600–1000 K. However, adding up to 1000 ppm N 2 O does not show any appreciable effect on the measurements. The promoting effect of NO 2 was found to increase with temperature in the range 950–1150 K, while the sensitization effect decreases at higher pressures. The experimental results measured are simulated using NUIGMech1.2 comprising an updated NO x sub-chemistry in this work. A kinetic analysis indicates that the competition between the reactions ĊH 3 + NO 2 ↔ CH 3 Ȯ + NO and ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), the former being a propagation reaction and the latter being a termination reaction governs NO x sensitization on CH 4 ignition. Recent calculations by Matsugi and Shiina (A. Matsugi, H. Shiina, J. Phys. Chem. A. 121 (2017) 4218–4224) for the nitromethane formation reaction CH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), together with the recently calculated rate constants for HONO/HNO 2 reactions significantly improve ignition delay time predictions in the temperature range 600–1000 K. Furthermore, the experiments with NO addition reveal a non-monotonous sensitization impact on CH 4 ignition at lower temperatures with NO initially acting as an inhibitor at low NO concentrations and then as a promoter as NO concentrations increase in the mixture. This non-monotonous trend is attributed to the role of the chain-termination reaction ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M) and the impact of NO on the transition to the chain-branching steps CH 2 O + HȮ 2 ↔ HĊO + H 2 O 2 , H 2 O 2 (+M) ↔ ȮH + ȮH (+M), HĊO ↔ CO + Ḣ followed by CO + O 2 ↔ CO 2 + Ö and Ḣ + O 2 ↔ Ö + ȮH. NUIGMech1.2 is systematically validated against the new ignition delay measurements taken here together with species measurements and high temperature ignition delay time data available in the literature for CH 4 /oxidizer mixtures diluted with NO 2 /N 2 O/NO and is observed to accurately capture the sensitization trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Developing the Oxidation Kinetic Model for Magnetite Pellet

Oxidation is a vital phenomenon for magnetite pellets in their excursion through the furnace during induration. One of the pre-requisites for magnetite pellets to achieve homogeneously structured good quality pellets is to have complete oxidation before sintering begins. Partially oxidized magnetite pellets, upon sintering, might result in inhomogeneous structured pellets which could be detrimental to pellet quality. It is necessary to understand the mechanisms responsible for magnetite oxidation, and hence, it is intended in this study to investigate experimentally as well as develop a mathematical model based on oxidation kinetics. Oxidation of pellets is largely influenced by the oxidation kinetics of particles and hence should be studied at particle as well as at pellet scale. The principles of the Grain Model have been adopted to develop the Oxidation Model at pellet scale, whereas the particles’ oxidation follows the Avrami Kinetic Model. Isothermal oxidation experiments performed Thermogravimetric Analyzer showed that oxidation rate of magnetite at pellet scale contained two peaks. They were complemented well by oxidation rates predicted from the model. Further, the pellet was investigated microstructurally at pellet and particle scale to substantiate the findings from the experiments and the model. The oxidation model developed is used to predict the progression of oxidation in the magnetite pellet with respect to the reaction time at three different temperatures (873 K, 973 K, and 1073 K (600 °C, 700 °C, and 800 °C)) and at four levels of oxygen (0.21, 0.30, 0.60, and 1.00 atm) in the oxidizing gas.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A wide range experimental study and further development of a kinetic model describing propane oxidation

This work presents an experimental and kinetic modeling study of propane oxidation. Ignition delay times of propane were measured in a high-pressure shock tube and in rapid compression machines in the temperature range 689 - 1700 K at equivalence ratios of 0.5, 1.0 and 2.0 in 'air', for a wide range of pressures from 20 to 90 bar. CO and H 2 O mole fraction profiles for propane oxidation were measured in a shock tube behind reflected shock waves in the temperature range 1370-1840 K at equivalence ratios of 0.5, 1.0 and 2.0 and at a pressure of approximately 1.3 atm. Moreover, propane oxidation was studied using a jet-stirred reactor coupled to a synchrotron vacuum ultraviolet photoionization mass spectrometer at low temperatures in the range 565 - 690 K and at a pressure of 1 atm. Further, this wide range of experimental datasets for propane oxidation was used to reoptimize and update our previous kinetic mechanisms, AramcoMech3.0 and NUIGMech1.1. In the current mechanism, NUIGMech1.3, the thermo-chemical parameters of all species relevant to low-temperature propane oxidation chemistry, including propyl-peroxyl, hydroperoxyl-propyl, hydroperoxyl-propyl-peroxyl, and carbonyl-hydroperoxide radicals, are updated based on newly calculated values at the CCSD(T)-F12/TZ-F12//B2PLYPD3/TZ///B2PLYP-D3/TZ level of theory. The improvements made in the thermochemical values and in the kinetic parameters for the low-temperature propane oxidation reactions in NUIGMech1.3 result in better model agreement with the new IDTs and speciation data, including carbon monoxide, formaldehyde, propene, acetaldehyde and various minor products such as ethylene, acetic acid, acrolein as well as various hydroperoxide and cyclic ether species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A drift kinetic model for the expander region of a magnetic mirror

Here, we present a drift kinetic model for the free expansion of a thermal plasma out of a magnetic nozzle. This problem relates to plasma space propulsion systems, natural environments such as the solar wind, and end losses from the expander region of mirror magnetically confined fusion concepts such as the gas dynamic trap. The model incorporates trapped and passing orbit types encountered in the mirror expander geometry and maps to an upstream thermal distribution. This boundary condition and quasineutrality require the generation of an ambipolar potential drop of ~5T e /e, forming a thermal barrier for the electrons. The model for the electron and ion velocity distributions and fluid moments is confirmed with data from a fully kinetic simulation. Finally, the model is extended to account for a population of fast sloshing ions arising from neutral beam heating within a magnetic mirror, again resulting in good agreement with a corresponding kinetic simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1987

Assessment of two-temperature kinetic model for ionizing air

A two-temperature chemical-kinetic model for air is assessed by comparing theoretical results with existing experimental data obtained in shock-tubes, ballistic ranges, and flight experiments. In the model, named the TTv model, one temperature (T) is assumed to characterize the heavy-particle translational and molecular rotational energies, and another temperature (Tv) to characterize the molecular vibrational, electron translational, and electronic excitation energies. The theoretical results for nonequilibrium air flow in shock tubes are obtained using the computer code STRAP (Shock-Tube Radiation Program), and for flow along the stagnation streamline in the shock layer over spherical bodies using the newly developed code STRAP (Stagnation-Point Radiation Program). Substantial agreement is shown between the theoretical and experimental results for relaxation times and radiative heat fluxes. At very high temperatures the spectral calculations need further improvement. The present agreement provides strong evidence that the two-temperature model characterizes principal features of nonequilibrium air flow. New theoretical results using the model are presented for the radiative heat fluxes at the stagnation point of a 6-m-radius sphere, representing an aeroassisted orbital transfer vehicle, over a range of free-stream conditions. Assumptions, approximations, and limitations of the model are discussed.

Park, Chul↗
DOE OSTI2022

A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 1

We report di-isobutylene has received significant attention as a promising fuel blendstock, as it can be synthesized via biological routes and is a short-listed molecule from the Co-Optima initiative. Di-isobutylene is also popularly used as an alkene representative in multi-component surrogate models for engine studies of gasoline fuels. However, there is limited experimental data available in the literature for neat di-isobutylene under engine-like conditions. Hence, most existing di-isobutylene models have not been extensively validated, particularly at lower temperatures (< 1000 K). Most gasoline surrogate models include the di-isobutylene sub-mechanism published by Metcalfe et al. with little or no modification. The current study is undertaken to develop a detailed kinetic model for di-isobutylene and validate the model using a wide range of relevant experimental data. Part 1 of this study exclusively focuses on the low- to intermediate temperature kinetics of di-isobutylene. An upcoming part 2 discusses the high-temperature model development and validation of the relevant experimental targets. Ignition delay time measurements for the di-isobutylene isomers were performed at pressures ranging from 15 - 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in air and in the temperature range 650 - 900 K using two independent rapid compression machine facilities. In addition, measurements of species identified during the oxidation of these isomers were performed in a jet-stirred reactor and in a rapid compression machine. A detailed kinetic model for the di-isobutylene isomers is developed to capture the wide range of new experimental targets. For the first time, a comprehensive low-temperature chemistry submodel is included. The differences in the important reaction pathways for the accurate prediction of the oxidation of the two DIB isomers are compared using reaction path analysis. In conclusion, the most sensitive reactions controlling the ignition delay times of the DIB isomers under the pressure and temperature conditions necessary for autoignition in engines are identified.

09 BIOMASS FUELS↗
DOE OSTI2020

The Sensitivity of Chemical Kinetic Models on Flame Transfer Functions in Acoustic Fluctuation Environments with Varying Equivalence Ratios

Various factors affect the heat release response of flames – thermodynamics, hydrodynamics, acoustics, etc. The coupling of heat release rate and acoustics, in particular, is essential to the design of combustion devices so as to avoid adverse effects during their operation. Modeling flames in acoustic environments requires an accurate understanding of the fundamental physics that occurs when flames interact with a fluctuating pressure field. Over the past couple of decades, researchers have been quantifying the impact of this fluctuating pressure field on the unsteady heat release rate. The flame transfer functions computed have also been shown to depend on the level of detail in the chemical kinetic model. This paper attempts to bridge the gap between these studies to understand how sensitive the flame transfer function is to various kinetic models. The problem is studied by performing multiple one-dimensional simulations using the low-Mach solver NGA. The detailed GRI-Mech 3.0 will be used for comparison. Also, the pressure amplitude and reactant equivalence ratio are varied to understand how the environment affects this sensitivity.

Girdhar, Anant↗
DOE OSTI2025

Challenges in integrating dissolved organic matter chemodiversity into kinetic models of soil respiration

The chemodiversity of dissolved organic matter (DOM) in soil has been proposed to influence the microbial metabolism and fate of belowground organic carbon (C). However, integrating DOM chemistry into soil C cycle models to improve predictions of C stocks and fluxes—beyond simply considering DOM pool size—remains a challenge. While recent research suggests that incorporating DOM chemodiversity into models can improve predictions of microbial respiration, there is still a lack of mechanistic understanding describing how DOM chemodiversity affects microbial metabolism and soil respiration. Here, we evaluated whether DOM chemodiversity was a determinant of soil respiration using paired measurements of high-resolution DOM chemistry, obtained from Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS), and potential soil respiration rates from across the United States (U.S.), all data provided by the Molecular Observation Network. Our objectives were to (1) assess statistical relationships between DOM chemodiversity and microbial respiration, and (2) evaluate the ability of kinetic models to leverage DOM chemistry to explain empirical relationships found in statistical models. Statistical regressions revealed that DOM chemodiversity (alpha diversity) was nonlinearly related to potential soil respiration rates, both independently and through its interactions with DOM and total C concentrations. In soils with relatively high DOM but low total C concentrations, potential soil respiration rates were negatively correlated with DOM alpha diversity, whereas in soils with relatively low DOM and high total C concentrations showed the opposite trend. However, when metabolic transition theory kinetic models were modified to include chemodiversity, their performance was comparable to traditional Monod kinetics approaches, which simulate respiration rates as a function of DOM concentration. The inability to account for nonlinearities in DOM chemodiversity–respiration relationships highlight an opportunity to advance substrate uptake kinetics by establishing causal links between DOM chemodiversity, microbial metabolism trade-offs, and potential interactions under varied environmental conditions.

Bioenergetic model↗
DOE OSTI2020

An experimental and kinetic modeling study of cyclopentane and dimethyl ether blends

Cyclopentane is a suitable naphthene, or cycloalkane, in a palette for multi-component gasoline surrogate fuels due to its presence in market fuels and its relevance to alkyl substituted cyclopentanes also present. However, the previous oxidation studies of cyclopentane have primarily focused on neat mixtures. Blending cyclopentane with dimethyl ether in this work therefore serves to inform our understanding of, and improve predictive models for, multi-component mixtures. Here, the auto-ignition of cyclopentane/dimethyl ether blends was studied in a high-pressure shock tube and in a rapid compression machine. A wide range of temperatures (650 – 1350 K) and elevated pressures of 20 and 40 bar were studied at equivalence ratios of 0.5, 1.0 and 2.0 in air for two blending ratios (30/70 and 70/30 mole% cyclopentane/di-methyl ether mixtures). A detailed kinetic model for cyclopentane was revised to capture the measured ignition delay times and apparent heat release rates in this study. Literature ignition delay time, jet-stirred reactor, and laminar burning velocity measurements of neat cyclopentane were used as additional validation. Improvements to the kinetic model were based on recent literature studies related to sub-models including cyclopentene and cyclopentadiene which allowed the removal of previous local rate-constant optimizations. Low temperature reactivity of cyclopentane was found to be controlled by the branching ratio between concerted elimination of HO͘ 2 and the strained formation of Q&#775OOH radicals in agreement with previous studies. In this study, the low branching ratio of Q&#775OOH formation increases the influence of a competing consumption pathway for cyclopentyl-peroxy (CPTO͘ 2 J) radicals. The sensitivity of the simulated ignition delay times to the formation of cyclopentyl hydroperoxide (CPTO 2 H), from CPTO͘ 2 J and HO͘ 2 , is discussed. The current model is used to analyze the influence of dimethyl ether on the reactivity of cyclopentane in the context of previous literature studies of dimethyl ether binary blends with ethanol and toluene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

Equations for the kinetic modeling of supersonically flowing electrically excited lasers

The equations for the kinetic modeling of a supersonically flowing electrically excited laser system are presented. The work focuses on the use of diatomic gases, in particular carbon monoxide mixtures. The equations presented include the vibrational rate equation which describes the vibrational population distribution, the electron, ion and electronic level rate equations, the gasdynamic equations for an ionized gas in the presence of an applied electric field, and the free electron Boltzmann equation including flow and gradient coupling terms. The model developed accounts for vibration-vibration collisions, vibration-translation collisions, electron-molecule inelastic excitation and superelastic de-excitation collisions, charge particle collisions, ionization and three body recombination collisions, elastic collisions, and radiative decay, all of which take place in such a system. A simplified form of the free electron Boltzmann equation is developed and discussed with emphasis placed on its coupling with the supersonic flow. A brief description of a possible solution procedure for the set of coupled equations is then discussed.

Lind, R. C.↗
NASA NTRS1991

'Self-consistent' production of ion conics on return current region auroral field lines - A time-dependent, semi-kinetic model

We describe initial results from a time-dependent, semi-kinetic model of plasma outflow incorporating wave-particle interactions along current-carrying auroral field lines. Electrostatic waves are generated by the current driven ion cyclotron instability (CDICI), causing perpendicular velocity diffusion of ions plus electron heating via anomalous resistivity when and where the relative drift between electrons and ions exceeds certain critical velocities. Using the local bulk parameters we calculate these critical velocities, and so are able to self-consistently switch on and off the heating of the various particle species. Due to the dependence of these critical velocities on the bulk parameters of the species the heating effects exhibit quite complex spatial and temporal variations. A wide range of ion distribution functions are observed in these simulations, including conics with energies of a few electron volts and 'ring' distributions. The rings are seen to be a natural result of transverse heating and velocity filter effects and do not require coherent acceleration processes. We also observe the formation of a density depletion in hydrogen and enhanced oxygen densities at high altitudes.

Brown, David G.↗
DOE OSTI2026

Kinetic model development for single step ethanol to butene rich olefin process over Cu-Y/Beta catalysts

Here, this study presents the first intrinsic kinetic model for the single-step conversion of ethanol to butene-rich olefins over bifunctional Cu-Y/Beta catalysts, addressing a critical gap in the design and scale-up of Sustainable Aviation Fuel (SAF) processes. The reaction network comprises ten global steps involving dehydrogenation, aldol condensation, hydrogenation, and dehydration reactions, distributed across Cu and rare-earth (Y) active sites. The model incorporates dual-site functionality (Cu and Y site) and explicitly accounts for key intermediates such as crotonaldehyde and butanal. Reaction rates are formulated using Langmuir–Hinshelwood–Hougen–Watson (LHHW) kinetics. Kinetic parameters are extracted by fitting the model to lab-scale packed-bed reactor data across a wide range of temperatures and space velocities, demonstrating strong agreement in ethanol conversion and product selectivity. The reaction kinetics developed in this work provide a foundational basis for constructing reactor models that enable process optimization and scale-up of ethanol-to-jet fuel technologies.

Cu-Y/Beta catalyst↗
DOE OSTI2024

An improved semi-global intrinsic kinetics model for high temperature carbon oxidation

Measurements of the oxidation rates of various forms of carbon (soot, graphite, coal char) have often shown an unexplained attenuation with increasing temperatures in the vicinity of 2000 K, even when accounting for diffusional transport limitations and gas-phase chemical effects (e.g. CO 2 dissociation). With the development of oxy-fuel combustion approaches for pulverized coal utilization with carbon capture, high particle temperatures are readily achieved in sufficiently oxygen-enriched environments. Here, in this work, a new semi-global intrinsic kinetics model for high temperature carbon oxidation is created by starting with a previously developed 5-step mechanism that was shown to reproduce all major known trends in carbon oxidation, except for its high temperature kinetic falloff, and incorporating a recently discovered surface oxide decomposition step. The predictions of this new model are benchmarked by deploying the kinetic model in a steady-state reacting particle code (SKIPPY) and comparing the simulated results against a carefully measured set of pulverized coal char combustion temperature measurements over a wide range of oxygen concentrations in N 2 and CO 2 environments. The results show that the inclusion of the spontaneous surface oxide decomposition reaction step significantly improves predictions at high particle temperatures. Furthermore, the simulations reveal that O atoms released from the oxide decomposition step enhance the radical pool in the near-surface region and within the particle interior itself. Incorporation of literature rates for O and OH reactions with the carbon surface results in a reduction in the predicted radical pool concentrations and a very minor enhancement of the overall carbon oxidation rate.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1977

Cooling rate estimations based on kinetic modelling of Fe-Mg diffusion in olivine

A finite one-dimensional kinetic model was developed to estimate the cooling rates of lunar rocks. The model takes into consideration the compositional zonation of olivine and applies Buening and Buseck (1973) data on ion diffusion in olivine. Since the 'as-solidified' profile of a given olivine is not known, a step-function, with infinite gradient, is assumed; the position of this step is based on mass balance considerations of the measured compositional profile. A minimum cooling rate would be associated with the preservation of a given gradient. The linear cooling rates of lunar rocks 12002 and 15555 were estimated by use of the olivine cooling-rate indicator to be 10 C/day and 5 C/day, respectively. These values are lower than those obtained by dynamic crystallization studies (10-20 C/day).

Taylor, L. A.↗