Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAURA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Nonequilibrium radiative heating prediction method for aeroassist flowfields with coupling to flowfield solvers

A method for predicting radiation adsorption and emission coefficients in thermochemical nonequilibrium flows is developed. The method is called the Langley optimized radiative nonequilibrium code (LORAN). It applies the smeared band approximation for molecular radiation to produce moderately detailed results and is intended to fill the gap between detailed but costly prediction methods and very fast but highly approximate methods. The optimization of the method to provide efficient solutions allowing coupling to flowfield solvers is discussed. Representative results are obtained and compared to previous nonequilibrium radiation methods, as well as to ground- and flight-measured data. Reasonable agreement is found in all cases. A multidimensional radiative transport method is also developed for axisymmetric flows. Its predictions for wall radiative flux are 20 to 25 percent lower than those of the tangent slab transport method, as expected, though additional investigation of the symmetry and outflow boundary conditions is indicated. The method was applied to the peak heating condition of the aeroassist flight experiment (AFE) trajectory, with results comparable to predictions from other methods. The LORAN method was also applied in conjunction with the computational fluid dynamics (CFD) code LAURA to study the sensitivity of the radiative heating prediction to various models used in nonequilibrium CFD. This study suggests that radiation measurements can provide diagnostic information about the detailed processes occurring in a nonequilibrium flowfield because radiation phenomena are very sensitive to these processes.

Hartung, Lin C.↗

Calculation of convective and radiative heating on the forebody heatshield of the aeroassist flight experiment vehicle

The total (convective and radiative) heating is calculated over the entire forebody heatshield of the Aeroassist Flight Experiment (AFE) vehicle. The convective heating is calculated using a three-dimensional Navier-Stokes code (LAURA) which includes both chemical and thermal nonequilibrium effects. The flowfield solution is then used to provide inputs to a nonequilibrium air radiation code (NEQAIR) to calculate the nonequilibrium radiative heating. Results are presented at two points on the current Baseline 5A trajectory corresponding to the start of the primary data taking period and peak heating.

Hamilton, H. Harris, II↗

Review of a code development and calibration program in support of the aeroassist flight experiment

The code development and calibration program for the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) is reviewed, with emphasis directed toward support of the Aeroassist Flight Experiment (AFE). The flight project is designed to obtain data which will be used in the validation of computational fluid dynamic approximation methods. Comparisons between experimental data and numerical simulation focus on perfect-gas tests over a scale model of the AFE and on flight and ground tests which challenge some aspect of the thermochemical nonequilibrium model. In the first case, the gas model is simple, but the grid-related problems of defining the real vehicle are present. In the second case, the vehicle geometries are simple, but thermochemical processes must be modeled correctly in order to compare with the experimental data. These comparisons are described as calibration runs because they test elements of the numerical simulation, but no single data set adequately simulates the full-scale AFE flight conditions. Comparisons between computation and experiment over a broad range of data sets show generally good agreement, though some aspects of the numerical model require further development.

Gnoffo, Peter A.↗

On the computation of near wake, aerobrake flowfields

Simulations of the near wake flowfield behind three aerobrakes have been implemented with Program LAURA, an algorithm for obtaining the numerical solution to the governing equations for three-dimensional, viscous, hypersonic flows in chemical and thermal nonequilibrium. Emphasis is placed on understanding the conditons which are likely to cause the shear layer to impinge on a payload positioned behind the aerobrake. A linear relationship between shear layer deflection angle and angle of attack (or lift-to-drag ratio) has been identified in several ground based tests. A similar relation appears in the numerical simulations, though there is some evidence that deflection angels may increase somewhat due to the effects of gas chemistry. Shear layer impingement can raise local heating levels a factor of 10 higher than levels present without impingement. Payload heating levels near impingement points are a larger percentage of stagnation point heating levels at higher altitudes and peak payload heating levels are likely to occur earlier in the trajectory than peak heating on the forebody stagnation point.

Gnoffo, Peter A.↗

A high angle of attack inviscid shuttle orbiter computation

As a preliminary step toward predicting the leeside thermal environment for winged reentry vehicles at flight conditions, a computational solution for the flow about the Shuttle Orbiter at wind tunnel conditions was made using a point-implicit, finite volume scheme known as the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). The surface pressures resulting from the computational solution are compared with wind tunnel data. The results indicate that the dominant inviscid flow features are being accurately predicted on the leeside of the Shuttle Orbiter at a moderately high angle of attack.

Kleb, William L.↗

Stagnation-point heat-transfer rate predictions at aeroassist flight conditions

The results are presented for the stagnation-point heat-transfer rates used in the design process of the Aeroassist Flight Experiment (AFE) vehicle over its entire aeropass trajectory. The prediction methods used in this investigation demonstrate the application of computational fluid dynamics (CFD) techniques to a wide range of flight conditions and their usefulness in a design process. The heating rates were computed by a viscous-shock-layer (VSL) code at the lower altitudes and by a Navier-Stokes (N-S) code for the higher altitude cases. For both methods, finite-rate chemically reacting gas was considered, and a temperature-dependent wall-catalysis model was used. The wall temperature for each case was assumed to be radiative equilibrium temperature, based on total heating. The radiative heating was estimated by using a correlation equation. Wall slip was included in the N-S calculation method, and this method implicitly accounts for shock slip. The N-S/VSL combination of projection methods was established by comparison with the published benchmark flow-field code LAURA results at lower altitudes, and the direct simulation Monte Carlo results at higher altitude cases. To obtain the design heating rate over the entire forward face of the vehicle, a boundary-layer method (BLIMP code) that employs reacting chemistry and surface catalysis was used. The ratio of the VSL or N-S method prediction to that obtained from the boundary-layer method code at the stagnation point is used to define an adjustment factor, which accounts for the errors involved in using the boundary-layer method.

Gupta, Roop N.↗

Electron number density profiles for the Aeroassist Flight Experiment

The basic features of a Microwave Reflectometer Ionization Sensor (MRIS) as designed for utilization on the Aeroassist Flight Experiment are described. A parametric study of the effects of trajectory and unknowns in the thermochemical nonequilibrium models for translational and vibrational-electronic energy exchange rates, reaction rates, and the average electronic excitation level of atoms is performed to illustrate how the MRIS data may be employed for code validation. This study, implemented with program LAURA, shows a particular sensitivity of the onset and severity of an electron avalanche phenomena associated with changes in these physical models.

Greendyke, Robert B.↗

A parametric analysis of radiative structure in aerobrake shock layers

A broad-spectrum version of the NEQAIR code was modified to account for self-absorption and applied to AFE flowfields calculated by the LAURA code with a variety of kinetic models. The resulting radiative fluxes were obtained in a decoupled fashion from the flowfield solver along the vehicle's stagnation streamline. The radiative flux obtained was broken down by causative process to study the radiative structure of the AFE's flowfield for the various kinetic models. In addition, the radiative fluxes for several points on a typical AFE trajectory were analyzed to examine how the radiative structure changes as the vehicle completes its aeropass. Only two radiative processes dominated the stagnation radiative flux, and the flow field conditions near the wal were found to exert considerable influence over the radiative flux to the wall.

Greendyke, Robert B.↗

Coupled radiation effects in thermochemical nonequilibrium shock-capturing flowfield calculations

Lunar and Mars return conditions are examined using the LAURA flowfield code and the LORAN radiation code to assess the effect of radiative coupling on axisymmetric thermochemical nonequilibrium flows. Coupling of the two codes is achieved iteratively. Special treatment required to couple radiation in a shock-capturing method is discussed. Results indicate that while coupling effects are generally the same as occur in equilibrium flows, under certain conditions radiation can modify the chemical kinetics of a nonequilibrium flow and thus alter relaxation processes. Coupling effects are found to be small for all cases considered, except for a five meter diameter aerobrake returning from Mars at 13.6 km/sec.

Hartung, Lin C.↗

Solution strategies and heat transfer calculations for three-dimensional configurations at hypersonic speeds

A procedure which reduces the memory requirements for computing the viscous flow over a modified Orbiter geometry at a hypersonic flight condition is presented. The Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) code which incorporates a thermochemical nonequilibrium chemistry model, a finite rate catalytic wall boundary condition and wall temperature distribution based on radiation equilibrium is used in this study. In addition, the effect of choice of 'min mod' function, eigenvalue limiter and grid density on surface heating is investigated. The surface heating from a flowfield calculation at Mach number 22, altitude of 230,000 ft and 40 deg angle of attack is compared with flight data from three Orbiter flights.

Weilmuenster, K. J.↗

High angle-of-attack inviscid Shuttle Orbiter computation

Results are presented of a comparison between the pressure distributions predicted by the perfect-gas computational fluid dynamics and the Shuttle Orbiter wind-tunnel data for high angles of attack, using the LAURA (for Langley Aerothermodynamic Upwind Relaxation Algorithm) as applied to the wind-tunnel condition to predict the flow over the vehicle. It is shown that the calculated pressures compare well with the wind tunnel data for both the windward and the leeward sides, indicating that the salient inviscid flow features were properly modeled.

Kleb, William L.↗

Heating analysis for a Lunar Transfer Vehicle at near-equilibrium flow conditions

A heating analysis for a 15.2 m diameter Lunar Transfer Vehicle (LTV) at 0 and 10.6 deg angle of attack for a nominal trajectory through the earth's atmosphere is described. The analysis utilizes the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) with thin-layer, Navier-Stokes, thermochemical nonequilibrium options. Radiative heating levels are calculated using the Langley Optimized RAdiative Nonequilibrium (LORAN) and the Non-EQuilibrium AIr Radiation (NEQAIR) codes. At peak heating, the shock layer is substantially in equilibrium. Comprehensive spatial and spectral grid convergence studies have been implemented to quantify grid effects on the convective and radiative heating levels. Axisymmetric tests including the coupled effects of radiative energy transfer show negligible change to the convective heating and a 20 percent reduction in the radiative heating.

Gnoffo, Peter A.↗

Analysis of hypersonic arcjet flow fields and surface heating of blunt bodies

A Gauss-Seidel implicit aerothermodynamic Navier-Stokes computational CFD code with thermochemical surface conditions (GIANTS) and with appropriate boundary conditions was developed for the analysis of hypersonic arcjet flows over large angle blunt bodies. Two-dimensional axisymmetric multicomponent full Navier-Stokes equations were solved, together with boundary conditions, to account for the surface slip, surface catalysis, and energy and mass conservation at the body surface. It is shown that the predictions for isothermal, noncatalytic, and no-slip surface conditions which are made using the GIANTS code with simple boundary conditions agree with those of the LAURA code, and the predicted normalized heating distributions over the forebody surface with boundary conditions for various cone angles are consistent with the trends of data from arcjet experiments.

Chen, Y.-K.↗

A multiblock analysis for shuttle orbiter re-entry heating from Mach 24 to Mach 12

A multiblock, laminar heating analysis for the shuttle orbiter at three trajectory points ranging from Mach 24.3 to Mach 12.86 on re-entry is described. The analysis is performed using the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) with both a seven species chemical nonequilibrium model and an equilibrium model. A finite-catalytic-wall model appropriate for shuttle tiles at a radiative equilibrium wall temperature is applied. Computed heating levels are generally in good agreement with the flight data though a few rather large discrepancies remain unexplained. The multiblock relaxation strategy partitions the flowfield into manageable blocks requiring a fraction of the computational resources (time and memory) required by a full domain approach. In hot, the computational cost for a solution at even a single trajectory point would be prohibitively expensive at the given resolution without the multiblock approach. Converged blocks are reassembled to enable a fully coupled converged solution over the entire vehicle, starting from a nearly converged initial condition.

Gnoffo, Peter A.↗

A convective and radiative heat transfer analysis for the FIRE II forebody

A Navier-Stokes flowfield solution method (LAURA code) using finite-rate chemistry and two-temperature thermal nonequilibrium was used in combination with two nonequilibrium radiative heat transfer codes to calculate heating for the FIRE II vehicle. An axisymmetric model of the actual body shape was used. One radiative heating code (NEQAIR) was used in uncoupled fashion with the flowfield solver's energy equations, while the other code (LORAN) was used in both coupled and uncoupled variations. Several trajectory points ranging from highly nonequilibrium flow to near-equilibrium flow were used for a study of both convective and radiative heating over the vehicle. Considerable variation in radiative heating was seen at the extremes, while agreement was good in the intermediate trajectory points. Total heat transfer calculations gave good comparison until the peak heating trajectory points were encountered, and returned to good agreement for the last two equilibrium points.

Greendyke, Robert B.↗

Hypersonic, nonequilibrium flow over a cylindrically blunted 6 deg wedge

The numerical simulation of hypersonic flow in chemical nonequilibrium over cylindrically blunted 6 degree wedge is described. The simulation was executed on a Cray C-90 with Program LAURA 92-vl. Code setup procedures and sample results, including grid refinement studies and variations of species number are discussed. This simulation relates to a study of wing leading edge heating on transatmospheric vehicles.

Gnoffo, Peter A.↗

Hypersonic, nonequilibrium flow over the FIRE 2 forebody at 1634 sec

The numerical simulation of hypersonic flow in thermochemical nonequilibrium over the forebody of the FIRE 2 vehicle at 1634 sec in its trajectory is described. The simulation was executed on a Cray C90 with the program Langley Aerodynamic Upwind Relaxation Algorithm (LAURA) 4.0.2. Code setup procedures and sample results, including grid refinement studies, are discussed. This simulation relates to a study of radiative heating predictions on aerobrake type vehicles.

Chambers, Lin Hartung↗

Developing a Graphical User Interface for the ALSS Crop Planning Tool

The goal of my project was to create a graphical user interface for a prototype crop scheduler. The crop scheduler was developed by Dr. Jorge Leon and Laura Whitaker for the ALSS (Advanced Life Support System) program. The addition of a system-independent graphical user interface to the crop planning tool will make the application more accessible to a wider range of users and enhance its value as an analysis, design, and planning tool. My presentation will demonstrate the form and functionality of this interface. This graphical user interface allows users to edit system parameters stored in the file system. Data on the interaction of the crew, crops, and waste processing system with the available system resources is organized and labeled. Program output, which is stored in the file system, is also presented to the user in performance-time plots and organized charts. The menu system is designed to guide the user through analysis and decision making tasks, providing some help if necessary. The Java programming language was used to develop this interface in hopes of providing portability and remote operation.

Koehlert, Erik↗