Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOAD FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Static aeroelastic analysis and tailoring of missile control fins

A concept for enhancing the design of control fins for supersonic tactical missiles is described. The concept makes use of aeroelastic tailoring to create fin designs (for given planforms) that limit the variations in hinge moments that can occur during maneuvers involving high load factors and high angles of attack. It combines supersonic nonlinear aerodynamic load calculations with finite-element structural modeling, static and dynamic structural analysis, and optimization. The problem definition is illustrated. The fin is at least partly made up of a composite material. The layup is fixed, and the orientations of the material principal axes are allowed to vary; these are the design variables. The objective is the magnitude of the difference between the chordwise location of the center of pressure and its desired location, calculated for a given flight condition. Three types of constraints can be imposed: upper bounds on static displacements for a given set of load conditions, lower bounds on specified natural frequencies, and upper bounds on the critical flutter damping parameter at a given set of flight speeds and altitudes. The idea is to seek designs that reduce variations in hinge moments that would otherwise occur. The block diagram describes the operation of the computer program that accomplishes these tasks. There is an option for a single analysis in addition to the optimization.

Mcintosh, S. C., Jr.↗
NASA NTRS1992

A study of the Lute Metering Structure

Two Metering Structure configurations were investigated. The first case was the traditional style metering structure which is larger than the outside diameter of the primary mirror. The second case investigated was the center support concept in which the outside diameter of the structure is less than the inside diameter of the primary mirror. Beryllium was used as the baseline material for this study. Four other materials were considered as candidates for the metering structure. These materials are: Graphite Epoxy, Aluminum, Titanium, and Invar. The loading conditions used for this study were estimated to be: Quasi Static: 6.0 G (all three directions); and Random Vibration: 30.0 G (applied 1 axis at a time). Taking advantage of symmetry, it was necessary to apply the lateral loading to only one axis. These loads were applied to both concepts and to all material configurations. The loadings as described above were based on the best available information and is felt to be adequate for this study since it was consistently used for all configurations. A load factor 2.00 was applied to both quasi static and random vibration loads. The allowable stresses are conservatively based yield strength of the material, except for the struts which are controlled by elastic stability. The stresses determined from each individual loading direction were conservatively combined by the absolute sum method.

Foreman, James W.↗
NASA NTRS1984

An evolutionary GEO transportation system

Several transportation system options that utilize the Space Station as a base for delivery of payloads to geosynchronous earth orbit are examined and compared to each other as well as to the reference case, which uses the orbiter as the staging base. The factors evaluated include impact on Kennedy Space Center (KSC) flow, STS traffic, load factor, and the cost effectiveness of each transportation system option. With respect to KSC flow, it is determined that utilizing the Space Station as a staging base could lead to a reduction of 3000 man-hours off-line and an additional 475 man-hours on-line. Launch costs for STS are reduced by 10 percent. The actual number of STS flights varies depending on the transportation system option, and the delivery of multiple payloads results in the least cost.

Markus, G.↗
NASA NTRS2016

Moving Aerospace Structural Design Practice to a Load and Resistance Factor Approach

Aerospace structures are traditionally designed using the factor of safety (FOS) approach. The limit load on the structure is determined and the structure is then designed for FOS times the limit load - the ultimate load. Probabilistic approaches utilize distributions for loads and strengths. Failures are predicted to occur in the region of intersection of the two distributions. The load and resistance factor design (LRFD) approach judiciously combines these two approaches by intensive calibration studies on loads and strength to result in structures that are efficient and reliable. This paper discusses these three approaches.

Larsen, Curtis E.↗
NASA NTRS1954

Matrix methods for determining the longitudinal-stability derivatives of an airplane from transient flight data

Three matrice methods are developed and presented for determining the longitudinal-stability derivatives from transient flight data. In these methods the expressions for some of the stability derivatives are in the form generally used in stability calculations. The first method requires the combination of four measurements in time-history form, two of which must be incremental elevator deflection and incremental tail load and the other two measurements can be chosen from a possible three, namely incremental load factor, pitching velocity, and angle of attack. The method demonstrates the use of the tail load to separate the pitching-moment derivatives and to determine the downwash derivative. (author)

Donegan, James J↗
NASA NTRS1968

Internal velocity factors

Computer program analyzes the entries and planetary trajectories of space vehicles. It obtains the equivalence of altitude and flight path angle, respectively, to acceleration load factor with respect to velocity for a given inertial velocity.

Cathcart, J. R.↗
NASA NTRS1937

On the actual loads on airplane landing gears

This investigation was intended to throw light on a number of problems: 1) obtain a time history of the force acting on the gear wheels during take-off and landing runs; 2) obtain the time history of the direction of this force (magnitude of its three components along the coordinate axes); 3) derive conclusions as to the design load factors. In connection with the latter, of special interest was the solution of such problems as: a) the dynamic loads in the three main landing attitudes; b) the problem of the true direction of the forces for each of the three "pure" types of landing; c) combination of the above types; d) the comparison for each of the chassis members of the computed force (according to the design standards) with the actual force measured in the tests so as to determine the actual factors of safety.

Shiskin, S↗
NASA NTRSDate not supplied

Passenger Aggregation Network with Very Efficient Listing (PANVEL) Ridesharing Model for Urban Air Mobility

This paper introduces a ridesharing model useful for examining the role of ridesharing in advancing Urban Air Mobility (UAM) operations. Although the success of UAM will likely require a host of new technologies in aircraft design, airspace management, autonomy, and more, operational innovations like ridesharing may also be key, especially to lower operating costs and attract a broader market. The ridesharing algorithm introduced, termed the Passenger Aggregation Network with Very Efficient Listing (PANVEL) model, estimates trip numbers and passenger occupancy aboard particular aircraft within a UAM network in a metropolitan area. This algorithm is applied within a transportation computational framework to determine the impact of ridesharing on mode choice, passenger travel patterns, and transportation costs. The algorithm aggregates passengers traveling between identical origin-destination pairs, factoring in individual-specific metrics, such as value of time and alternative mode options, to generate high load factors on UAM aircraft. The computational framework simulates passenger mode-choice selections using an effective-cost approach to determine the number of ridesharing UAM-preferred trips, and results with ridesharing are representative of a rough upper bound on UAM ridership potential for a given metro area. A case study in the Cleveland metro area is presented to demonstrate the algorithm and assess ridesharing potential.

advanced air mobility↗
NASA NTRSDate not supplied

Passenger Aggregation Network with Very Efficient Listing (PANVEL) Ridesharing Model for Urban Air Mobility

This presentation introduces a ridesharing model useful for examining the role of ridesharing in advancing Urban Air Mobility (UAM) operations. Although the success of UAM will likely require a host of new technologies in aircraft design, airspace management, autonomy, and more, operational innovations like ridesharing may also be key, especially to lower operating costs and attract a broader market. The ridesharing algorithm introduced, termed the Passenger Aggregation Network with Very Efficient Listing (PANVEL) model, estimates trip numbers and passenger occupancy aboard particular aircraft within a UAM network in a metropolitan area. This algorithm is applied within a transportation computational framework to determine the impact of ridesharing on mode choice, passenger travel patterns, and transportation costs. The algorithm aggregates passengers traveling between identical origin-destination pairs, factoring in individual-specific metrics, such as value of time and alternative mode options, to generate high load factors on UAM aircraft. The computational framework simulates passenger mode-choice selections using an effective-cost approach to determine the number of ridesharing UAM-preferred trips, and results with ridesharing are representative of a rough upper bound on UAM ridership potential for a given metro area. A case study in the Cleveland metro area is presented to demonstrate the algorithm and assess ridesharing potential.

advanced air mobility↗
NASA NTRS1952

A theoretical investigation of the effect of partial wing lift of hydrodynamic landing characteristics of V-bottom seaplanes in step impacts

A theoretical investigation is made of the loads and motions in water-landing impacts of wide prismatic V-bottom seaplanes for constant partial wing-lift conditions where the resultant velocity of the seaplane is normal to the keel. An approximate method is given for applying the results of this investigation to the more general case of oblique impact. The increase in vertical hydrodynamic load factor due to wing-lift reduction is shown to be approximately 133 percent of the decrease in air load.

HYDRODYNAMIC THEORY↗
NASA NTRS2003

Cost Effective Measures to Reduce CO2 Emissions in the Air Freight Sector

This paper presents cost effective measures to reduce CO2 emissions in the air freight sector. One door-to-door transport chain is studied in detail from a Scandinavian city to a city in southern Europe. The transport chain was selected by a group of representatives from the air freight sector in order to encompass general characteristics within the sector. Three different ways of shipping air cargo are studied, i.e., by air freighter, as belly freight (in passenger aircrafts) and trucking. CO2 emissions are calculated for each part of the transport chain and its relative importance towards the total amount CO2 emitted during the whole transport chain is shown. It is confirmed that the most CO2 emitting part of the transport chain is the actual flight and that it is in the take-off and climbing phases that most fuel are burned. It is also known that the technical development of aircraft implies a reduction in fuel consumption for each new generation of aircraft. Thus, the aircraft manufacturers have an important role in this development. Having confirmed these observations, this paper focuses on other factors that significantly affects the fuel consumption. Analyzed factors are, e.g., optimization of speed and altitude, traffic management, congestion on and around the airfields, tankering, "latest acceptance time" for goods and improving the load factor. The different factors relative contribution to the total emission levels for the transport chain has been estimated.

Blinge, Magnus↗
NASA NTRS1949

Comparison of Water-Load Distributions Obtained during Seaplane Landings with Bureau of Aeronautics Specifications. TED No. NACA 2413

Bureau of Aeronautics Design Specifications SS-IC-2 for water loads in sheltered water are compared with experimental water loads obtained during a full--scale landing investigation. This investigation was conducted with a JRS-1 flying boat which has a 20 degrees dead-rise V-bottom with a partial chine flare. The range of landing conditions included airspeeds between 88 and 126 feet per second, sinking speeds between 1.6 and 9.1 feet per second, flight angles less than 6 degrees, and trims between 2 degrees and 12 degrees. Landings were moderate and were made in calm water. Measurements were obtained of maximum over-all loads, maximum pitching moments, and pressure distributions. Maximum experimental loads include over-all load factors of 2g, moments of 128,000 pound-feet, and maximum local pressures greater than 40 pounds per square inch. Experimental over-all loads are approximately one-half the design values, while local pressures are of the same order as or larger than pressures calculated from specifications for plating, stringer, floor, and frame design. The value of this comparison is limited, to some extent, by the moderate conditions of the test and by the necessary simplifying assumptions used in comparing the specifications with the experimental loads.

Smiley, Robert F.↗
NASA NTRS1966

Control circuit maintains unity power factor of reactive load

Circuit including feedback control elements automatically corrects the power factor of a reactive load. It maintains power supply efficiency where negative load reactance changes and varies by providing corrective error signals to the control windings of a power supply transformer.

Kramer, M.↗
NASA NTRS2011

Test-Anchored Vibration Response Predictions for an Acoustically Energized Curved Orthogrid Panel with Mounted Components

rich body of vibroacoustic test data was recently generated at Marshall Space Flight Center for component-loaded curved orthogrid panels typical of launch vehicle skin structures. The test data were used to anchor computational predictions of a variety of spatially distributed responses including acceleration, strain and component interface force. Transfer functions relating the responses to the input pressure field were generated from finite element based modal solutions and test-derived damping estimates. A diffuse acoustic field model was applied to correlate the measured input sound pressures across the energized panel. This application quantifies the ability to quickly and accurately predict a variety of responses to acoustically energized skin panels with mounted components. Favorable comparisons between the measured and predicted responses were established. The validated models were used to examine vibration response sensitivities to relevant modeling parameters such as pressure patch density, mesh density, weight of the mounted component and model form. Convergence metrics include spectral densities and cumulative root-mean squared (RMS) functions for acceleration, velocity, displacement, strain and interface force. Minimum frequencies for response convergence were established as well as recommendations for modeling techniques, particularly in the early stages of a component design when accurate structural vibration requirements are needed relatively quickly. The results were compared with long-established guidelines for modeling accuracy of component-loaded panels. A theoretical basis for the Response/Pressure Transfer Function (RPTF) approach provides insight into trends observed in the response predictions and confirmed in the test data. The software developed for the RPTF method allows easy replacement of the diffuse acoustic field with other pressure fields such as a turbulent boundary layer (TBL) model suitable for vehicle ascent. Structural responses using a TBL model were demonstrated, and wind tunnel tests have been proposed to anchor the predictions and provide new insight into modeling approaches for this environment. Finally, design load factors were developed from the measured and predicted responses and compared with those derived from traditional techniques such as historical Mass Acceleration Curves and Barrett scaling methods for acreage and component-loaded panels.

Frady, Gregory P.↗
NASA NTRS1952

Matrix Method of Determining the Longitudinal-Stability Coefficients and Frequency Response of an Aircraft from Transient Flight Data

A matrix method is presented for determining the longitudinal-stability coefficients and frequency response of an aircraft from arbitrary maneuvers. The method is devised so that it can be applied to time-history measurements of combinations of such simple quantities as angle of attack, pitching velocity, load factor, elevator angle, and hinge moment to obtain the over-all coefficients. Although the method has been devised primarily for the evaluation of stability coefficients which are of primary interest in most aircraft loads and stability studies, it can be used also, with a simple additional computation, to determine the frequency-response characteristics. The entire procedure can be applied or extended to other problems which can be expressed by linear differential equations.

Donegan, James J↗
NASA NTRS1994

In-flight lift-drag characteristics for a forward-swept wing aircraft and comparisons with contemporary aircraft)

Lift (L) and drag (D) characteristics have been obtained in flight for the X-29A airplane (a forward swept-wing demonstrator) for Mach numbers (M) from 0.4 to 1.3. Most of the data were obtained near an altitude of 30,000 ft. A representative Reynolds number for M = 0.9, and a pressure altitude of 30,000 ft, is 18.6 x 10(exp 6) based on the mean aerodynamic chord. The X-29A data (forward-swept wing) are compared with three high-performance fighter aircraft: the F-15C, F-16C, and F/A18. The lifting efficiency of the X-29A, as defined by the Oswald lifting efficiency factor, e, is about average for a cantilevered monoplane for M = 0.6 and angles of attack up to those required for maximum L/D. At M = 0.6 the level of L/D and e, as a function of load factor, for the X-29A was about the same as for the contemporary aircraft. The X-29A and its contemporaries have high transonic wave drag and equivalent parasite area compared with aircraft of the 1940's through 1960's.

Saltzman, Edwin J.↗
NASA NTRS1978

Characteristics of future air cargo demand and impact on aircraft development - A report on the Cargo/Logistic Airlift Systems Study /CLASS/ project

The considered study has been conducted to evaluate the future potential for an advanced air cargo transport. A current operations analysis is discussed, taking into account the traffic structure, modal cost comparisons, terminal operations, containerization, and institutional factors. Attention is also given to case studies, a demand forecast, and an advanced air cargo systems analysis. The effects of potential improvements on reducing costs are shown. Improvement to the current infrastructure can occur from 1978 to 1985 with off-the-shelf technology, which when combined with higher load factors for aircraft and containers, can provide up to a 16 percent reduction in total operating costs and a 15 percent rate reduction. The results of the analysis indicate that the proposed changes in the infrastructure and improved cargo loading efficiencies are as important to improving the airlines' financial posture as is the anticipated large dedicated cargo aircraft.

Whitehead, A. H., Jr.↗
NASA NTRS2011

Isotopic Evidence for the Source and Fate of Phosphorus in Everglades Wetland Ecosystems

Phosphorus has historically been a limiting nutrient in the Florida Everglades. Increased P loading to the Everglades over the past several decades has led to significant changes in water quality and plant communities. Stormwater runoff that drains agricultural lands and enters the Water Conservation Areas (WCAs) are known to contain elevated levels of P, but the exact source of this P has not been fully determined. Here the results of an O isotope study of dissolved inorganic phosphate (DIP) in both polluted and relatively pristine (or reference) areas of the Everglades are reported. The data reveal spatial and temporal variations in the delta 18O signature of DIP, reflecting the source and the degree of cycling of P. The delta 18O values of DIP collected from the Everglades National Park were close or equal to the predicted delta 18O values of DIP formed in situ in equilibrium with ambient water, indicating that P is quickly cycled in the water column in oligotrophic ecosystems with very low P concentrations. However, most DIP samples collected from areas impacted by agricultural runoff yielded delta 18O values that deviated from the predicted equilibrium DIP delta 18O values based on the delta 18O of water and water temperature, suggesting that biological cycling of P was not rapid enough to remove the fertilizer ?18O signature in the DIP pool from areas receiving high P loading. The delta 18O signature of DIP in impacted areas reflects a mixing of fertilizer P and biologically cycled P, where the relative proportions of biologically cycled vs. fertilizer DIP are controlled by both biological (microbial activities and plant uptake) and hydrologic factors (loading rate and residence time). Using a two-end-member (i.e., fertilizer P and biologically cycled P) mixing model, fertilizers were estimated to contribute about 15 100% of the DIP pool in the highly impacted areas of the northern Everglades, whereas the DIP pool in the reference (i.e., relatively pristine) wetlands in the Everglades National Park was dominated by biologically cycled P. The study shows that O isotopic measurements of dissolved PO(exp 3-, sub 4) can be a useful tool for tracing the fertilizer P inputs to freshwater ecosystems.

Li, Xin↗