Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOW STRENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Acoustic fluidization - A new geologic process

A number of geologic processes, particularly seismic faulting, impact crater slumping, and long runout landslides, require the failure of geologic materials under differential stresses much smaller than expected on the basis of conventional rock mechanics. This paper proposes that the low strengths apparent in these phenomena are due to a state of 'acoustic fluidization' induced by a transient strong acoustic wave field. The strain rates possible in such a field are evaluated, and it is shown that acoustically fluidized debris behaves as a newtonian fluid with a viscosity in the range 100,000 to 10,000,000 P for plausible conditions. Energy gains and losses in the acoustic field are discussed, and the mechanism is shown to be effective if internal dissipation in the field gives a Q approximately greater than 100. Whether such values for Q are realized is not known at present. However, acoustic fluidization provides a qualitatively correct description of the failure of rock debris under low differential stresses in the processes of faulting, crater slumping, and long runout landslides. Acoustic fluidization thus deserves serious consideration as a possible explanation of these phenomena.

Melosh, H. J.↗
NASA NTRSDate not supplied

On-Orbit Glass Stress Measurement Tool Development

Exposed window surfaces on-orbit are vulnerable to a variety of damage including impacts. These impacts impart stress into the panes and reduce the remaining life of the window. Spacecraft windows are evaluated before and after flight to determine the minimum strength of the glass prior to launch. Currently, no method exists to accurately evaluate the windows on-orbit. An on-orbit optical system is under development to evaluate spacecraft windowpane material for remaining flight life by directly measuring the stress in the glass. This optical system builds on the industry-standard practice of calculating the amount of impact-induced stress through birefringence measurement. In industry, the birefringence is imaged through the pane with a detector and light source on opposite sides. On-orbit, there is only access to one side of the pane. This system has been designed to image birefringence by reflecting the light off the pane to a detector on the same side of the glass. Previous studies have shown a correlation between material stress distribution and the associated K-value. This system is designed to determine low strength areas which can be caused by defects due to impact damage. Glass samples will be imaged and broken in order to correlate impact-induced stress to the fracture strength of the material. Once this correlation is determined, a quantitative assessment of the stress areas in spacecraft windows will occur prior to and during mission operations to reliably determine the overall strength of the glass.

Max J Schneiderman↗
DOE OSTI2019

Seamless Nb tubes for SRF cavities

A. Executive Summary Understanding Developed Relationships between level of work, plastic strain orientation, level of annealing, grain size, strength, ductility, and texture were developed for heavily worked bulk RRR grade cast pure niobium (Nb). Technical Effectiveness of Approach Part A: The approach used for plastic deformation of bulk Nb was room temperature equal channel angular extrusion (ECAE). This approach is very effective for microstructural breakdown of worked and post-strain recrystallized Nb. A major problem with breaking down the microstructure of cast Nb is development of a consistent (repeatable) and uniform microstructure. This is most effectively accomplished by a series of orthogonal working steps (multipass ECAE (mECAE)) separated by full recrystallization. Forming tube from such material leads to a uniform microstructure in the tube. Part B: The approach developed to produce a microstructure in thin-walled tube that is very favorable for hydroforming into a superconducting radio frequency (SRF) cavity is tube-ECAE (tECAE). Tube-ECAE results in an axisymmetric circumferentially uniform microstructure with a texture more favorable for expansion hydroforming than tube formed by conventional methods such as extrusion, drawing, and ironing. Economic Feasibility of Methods Investigated and Demonstrated Although this was not demonstrated because of funding limitations, it is strongly believed that mECAE combined with intermediate recrystallization heat treatments and tECAE are economically viable approaches for producing a consistent, uniform, fine- or coarse-grained microstructure in RRR grade Nb tube starting from a large-grained and highly textured cast ingot. These methods are relatively easy to apply; the challenge is development of equipment and tooling that works well and is operator friendly. Commercially viable ECAE tooling for bulk Nb microstructure breakdown was developed; significant progress was made on the design of scaled-up equipment for tECAE. Patents on tECAE have been granted in Europe, Japan, and the United States. Public Benefit The approaches developed for fabricating RRR grade Nb tubing suitable for hydroforming into multi-cell SRF cavities have substantial public benefit because they will enable the manufacture of lower cost multicell SRF cavities for advanced linear particle accelerators. In addition, the approach developed for fabricating uniform and consistent axisymmetric microstructures in metal tubing can be applied to tubes made of metal alloys other than Nb. Applications exist in Ta tubing for superconductor wire applications, Mg alloy tubing for bio-implants, and aerospace tubing for structural hollow section components. The idea of tECAE can be applied to heal the heat affected zone (HAZ) in seam-welded tubing, thus erasing or healing the low-strength properties in the weld zone.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion

Copper is under consideration as the optimum material for both high heat flux applications and high pulsed magnets. One challenge is that copper has low strength which is problematic to deployment in these applications. One solution is to alloy copper with BCC elements to improve its mechanical properties. However, the limited solubility of the BCC elements in copper requires high deformation processes to be used in order to manufacture these 3D composites. Here, high energy ball milling combined with high pressure torsion was used to manufacture 3D Cu-Nb composites. After the consolidation the mechanical properties of the composites were measured using micro- and nanohardness testing at room and elevated temperature. The results indicated that after 10 turns during the high-pressure torsion consolidation, the mechanical properties of the composites were completely saturated displaying uniform properties across the manufactured disk. Performing the high pressure torsion at temperature further improved consolidation of the disk. The high temperature nanoindentation also indicated a change in the deformation mechanism between 200 and 500 ºC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Numerical modeling of electromagnetic field spatiotemporal evolution to evaluate the effects on calcium carbonate crystallization

Calcium carbonate (CaCO 3 ) scaling is a significant impediment to water systems. Electromagnetic field (EMF) treatment is a promising approach to control scaling owing to its simplicity and low or no energy requirements. However, the underlying mechanisms by which EMF impacts CaCO 3 crystallization remain unclear due to the challenges in measuring the EMFs in feed solutions and the lack of a fundamental understanding of the applied EMFs and the observed physicochemical phenomena. To fill this knowledge gap, a high-fidelity COMSOL model was first developed to simulate EMFs in bulk solutions for three alternating current-induced EMF devices with different configurations and properties. These were then integrated with experimental data to unveil the underlying mechanism by which applied EMFs alter the physicochemical processes. The study revealed that even low-strength EMFs (e.g., electric fields <0.15 V/m and magnetic fields <0.03 mT) promoted CaCO 3 precipitation in bulk solutions. The electric fields created by these EMF devices resulted in higher Lorentz force compared to their induced magnetic fields. In conclusion, the methodology of this study offers the capability to predict the effectiveness of different EMF devices in facilitating crystallization processes, and these mechanistic insights lay the foundation for the smart design of EMF devices for diverse water treatment applications.

COMSOL simulation↗
DOE OSTI2025

Experimental characterization and potential energy savings of insulated cladding for U.S. residential buildings

This study evaluates a novel insulated cladding composed of foamed cement and vinyl siding that is designed as a retrofit product to enhance thermal performance in U.S. residential buildings. Experimental measurements showed that foamed cement exhibits a thermal conductivity of 0.0334–0.0365 W/m-K (R-value of 4.0–4.3 °F⋅ft 2 ⋅h/BTU), which is significantly higher than that of conventional fiber cement boards. Although mechanical testing confirmed the material’s brittleness and low strength, it also indicated its suitability for nonstructural insulation applications. Water vapor permeability testing demonstrated effective moisture resistance with the polymer coating. To evaluate the insulated cladding’s energy performance, we used the U.S. Department of Energy’s prototype single-family building model and simulated across 50 locations spanning 16 International Energy Conservation Code climate zones. The R-7 (R-value of 7 °F⋅ft 2 ⋅h/BTU per inch) retrofit cladding resulted in heating energy savings up to 275 therms (Fairbanks, AK) and cooling energy savings up to 1,547 kWh (Phoenix, AZ). The energy cost savings varied by region, but the highest annual cost savings ($\$$434/year) were observed in Santa Maria, CA, and the highest annual cost savings percentage (37 %) were noted in Monterey, CA. On a national scale, the insulated retrofit provided an average annual energy cost reduction of 16 %, highlighting the cladding system’s broad applicability and financial viability.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Numerical Simulation of Reservoir Response to Depressurization

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths less than 300m and sub-sea depths of 2400m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-interbedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals,” that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth: models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Boswell, Ray↗
DOE OSTI2026

Leveraging Stereochemistry to Optimize the Properties of Polyhydroxyalkanoates

The recycling of low-density polyethylene (LDPE) is challenging due to difficulties with sorting and contamination, leading to environmental harm. Polyhydroxyalkanoates (PHAs) are at the forefront of high-performance biodegradable alternatives to olefinic plastics, but few offer LDPE-like properties such as low strength and crystallinity while maintaining high ductility and thermal stability. Herein, we report a series of isoenriched transpoly( 3-hydroxy-2-methylbutyrates) (trans-PHMBs) with tunable mechanical and thermal properties. These polymers were synthesized through ring-opening polymerization of racemic trans-3,4-dimethylpropiolactone (rac-trans-DMPL), sourced from C1 and C4 feedstocks, using a new class of “sandwich” C 2 symmetric rac-( Ar BDI*)ZnO i Pr catalysts (where BDI = β-diketiminate). Variation of aromatic groups (Ar) and polymerization temperature yielded mm%s between 45−79% and melting temperatures (T m ) between 141−174 °C. trans-PHMB with intermediate isotacticities of 73 and 75 mm% exhibit similar stress−strain profiles to LDPE, indicating that these polymers have the potential to serve as higher melting, degradable substitutes for LDPE.

Biopolymers↗
DOE OSTI2020

Crustal Structure of the Mesopotamian Plain, East of Iraq

The crustal structure of Iraq was investigated through analyzing teleseismic data from 12 new seismic stations. Three seismic stations are located within the Zagros Fold-Thrust Belt, and nine are within the Mesopotamian Plain. Joint inversion of P wave receiver function and Rayleigh wave dispersion data were employed to resolve S wave velocity structure models beneath each station. Combining these models with available Moho depths within and around the study area reveals that the Moho depth is smoothly increasing from the Arabian platform toward the Zagros Mountains. Further, an exceptional deeper root is observed near the eastern edge of the Mesopotamian Plain where sedimentary pile is the thickest. This root was interpreted as a structure inherited from the successive Mesozoic rifting of the NE Arabian platform enhanced by sedimentary loading and progressive subsidence. A low-velocity uppermost mantle was observed beneath the Arabian Foredeep attesting the existence of a low-strength lithospheric mantle beneath the region southwest from the Zagros deformation front. The weak rheology of the uppermost mantle may have allowed local sinking of the crust and deepening of the Moho boundary due to vertical loading and the Late Miocene lateral contraction.

58 GEOSCIENCES↗
DOE OSTI2022

Research on Deformation Law of Deep Foundation Pit of Station in Core Region of Saturated Soft Loess Based on Monitoring

Saturated soft loess has a large pore structure, high compressibility, low strength, fluid plastic state, and poor engineering properties. It is still one of the key problems that engineering needs to solve. In order to study the influence of deep foundation pit excavation in the saturated soft loess area on the deformation of foundation pits, the deformation laws of ground settlement, enclosure structure, and supporting axial force were clarified based on the field tests on the deformation characteristics of deep foundation pits in areas with the high-water level in saturated soft loess, combined with geological conditions and on-site construction procedures. The results indicate the following: water supply and construction process were found to be the main factor in changing the surface settlement curve of deep foundation pits in saturated soft loess; increasing the construction speed of the pit bottom floor, inverted braces, floor frame beams, and sidewall frame beams to close the structure, which is conducive to restraining the deformation of the continuous underground wall and foundation pits in similar areas. In the initial stage of support layout, the axial force of steel support tends to increase too fast or even exceed the standard control value. Therefore, a reasonable preadding axial force is an effective means to control the deformation of the continuous underground wall and the axial force of the steel support. The current research results may provide a reference for constructing deep foundation pits in similar areas.

Wang, Xueyan↗
DOE OSTI2019

Mechanical Behavior of D-Shaped Hiperco Specimens under Tension Measured by Digital Image Correlation

Hiperco, manufactured by Carpenter Technology Corporation, is the trademark name for an alloy of equal composition iron and cobalt, with 2 percent vanadium added for enhanced mechanical properties (49Fe-49Co-2V). The alloy is interesting due to its very high magnetic saturation and flux density, yet undesirable mechanical properties such as brittleness and low strength. Several Hiperco specimens cut to a "D”-shaped geometry were placed under tension in a load frame, with a constant strain rate at room temperature, until failure occurred. Digital image correlation was used to obtain strain field data throughout the experiment. The data is to be used to compare with a finite element model, to investigate if Hiperco's unusual behavior can be modeled accurately with chosen model parameters. Between the five specimens tested, high-level results were consistent. Maximum strain and ultimate tensile strength all fell within acceptable bounds. However, several qualitative results differed from specimen to specimen. These differing results include the point of failure, the start point of Liiders band formation, as well as the presence or absence of Liiders bands on the curved section of the "D” specimens.

36 MATERIALS SCIENCE↗
NASA NTRS1965

Magnetometer measures orthogonal components of magnetic fields

Driven magnetometer accurately measures the components of a low strength magnetic field in each of three mutually perpendicular directions. To accomplish this, it employs the principle of magnetic resonance in optically pumped rubidium vapor.

Source record↗
NASA NTRS1971

Study program of NASA/GSFC weld quality monitor system

The Weld Quality Monitor has provided online control through the application of linear transducers. The electronic systems must be upgraded to increase confidence level required in production. The Weld Quality Monitor has been used with a recent model solid state power supply to evaluate ability to differentiate between sound and defective weld joints. The Weld Quality Monitor has been evaluated on Dumet and Kovar to interconnect materials Nickel and Alloy 180 in weld joints used on microelectronic module fabrication. Distinct separation was achieved between low strength welds and sound welds by the Quality Monitor. Evaluation performed indicates a drift level at less than 2 percent on a series of 50 consecutive welds. Operation under shop conditions identified need for controlled electrode impact. This was achieved with pneumatic actuation.

Hutchinson, W. R.↗
NASA NTRS1980

Development of moldable, high density reaction bonded silicon nitride

It is noted that currently available reaction bonded silicon nitride (RBSN) materials are limited by relatively low strength (up to 300 MPa) and oxidation resistance, primarily due to open porosity. Attention is given to technology that was developed and used to produce an improved grade of injection molded RBSN having a density of 2.8 g/cc, with significantly decreased open porosity and a strength exceeding 350 MPa. It is shown that these results are primarily due to advances in two areas: silicon powder processing, and nitriding technique. A comparison of room temperature strength and oxidation resistance of the new material with that of state-of-the-art RBSN, showed significant improvements. It is concluded that turbine stator vanes were produced to show that this improved RBSN technology has been reduced to engineering practice.

Mangels, J. A.↗
NASA NTRS1982

Improved Tensile Test for Ceramics

For almost-nondestructive tensile testing of ceramics, steel rod is bonded to sample of ceramic. Assembly is then pulled apart in conventional tensile-test machine. Test destroys only shallow surface layer which can be machined away making specimen ready for other uses. Method should be useful as manufacturing inspection procedure for low-strength brittle materials.

Osiecki, R. A.↗
NASA NTRS1981

Study of Near-Threshold Fatigue Crack Propagation in Pipeline Steels in High Pressure Environments

Near threshold fatigue crack propagation in pipeline steels in high pressure environments was studied. The objective was to determine the level of threshold stress intensity for fatigue crack growth rate behavior in a high strength low alloy X60 pipeline-type steel. Complete results have been generated for gaseous hydrogen at ambient pressure, laboratory air at ambient pressure and approximately 60% relative humidity as well as vacuum of 0.000067 Pa ( 0.0000005 torr) at R-ratios = K(min)/K(max) of 0.1, 0.5, and 0.8. Fatigue crack growth rate behavior in gaseous hydrogen, methane, and methane plus 10 percent hydrogen at 6.89 MPa (100 psi) was determined.

Mitchell, M.↗