SEARCH · Search NASA

Results for “LUNAR TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Topographic analysis of lunar secondary craters of Copernicus and implications

An analysis is conducted of the topography of lunar secondary craters and the associated herringbone pattern observed on lunar topophotomaps. The topography and the patterns are compared with those of crater pairs produced in the laboratory. The results are used to identify secondaries on the lunar uplands. The chain of craters that was selected for mapping and which is described is known to be a secondary impact crater chain produced by material ejected from Copernicus Crater because it lies on a well-developed ray system of Copernicus. Oberbeck et al. (1977) had hypothesized that most lunar areas exhibit more craters smaller than 50 km than are observed on Mars and Mercury because lower lunar gravity permitted more widespread distribution of secondaries for the moon. After removal of basin secondaries it is found that the surfaces of the lunar uplands are only sparsely populated by craters between 5 and 50 km. The lunar uplands appear then similar to the Mercurian terrain.

Oberbeck, V. R.↗

NASA NTRS1966

The structure and texture of the floor of Alphonsus

Textural units and lineaments on lunar crater floor studied from Ranger IX photographs

LUNAR TOPOGRAPHY↗

NASA NTRS2010

Illumination Conditions of the Lunar Polar Regions Using LOLA Topography

We use high-resolution altimetry data obtained by the Lunar Orbiter Laser Altimeter instrument onboard the Lunar Reconnaissance Orbiter to characterize present illumination conditions in the polar regions of the Moon. Compared to previous studies, both the spatial and temporal extent of the simulations are increased significantly, as well as the coverage (fill ratio) of the topographic maps used, thanks to the 28 Hz firing rate of the five-beam instrument. We determine the horizon elevation in a number of directions based on 240 m-resolution polar digital elevation models reaching down to 75 latitude. The illumination of both polar regions extending to 80 can be calculated for any geometry from those horizon longitudinal profiles. We validated our modeling with recent Lunar Reconnaissance Orbiter Wide-Angle Camera images. We assessed the extent of permanently shadowed regions (PSRs, defined as areas that never receive direct solar illumination), and obtained total areas generally larger than previous studies (12,866 and 16,055 sq. km, in the north and south respectively). We extended our direct illumination model to account for singly-scattered light, and found that every PSR does receive some amount of scattered light during the year. We conducted simulations over long periods (several 18.6-years lunar precession cycles) with a high temporal resolution (6 h), and identified the most illuminated locations in the vicinity of both poles. Because of the importance of those sites for exploration and engineering considerations, we characterized their illumination more precisely over the near future. Every year, a location near the Shackleton crater rim in the south polar region is sunlit continuously for 240 days, and its longest continuous period in total darkness is about 1.5 days. For some locations small height gains ( 10 m) can dramatically improve their average illumination and reduce the night duration, rendering some of those particularly attractive energy-wise as possible sites for near-continuous sources of solar power.

E. Mazarico↗

NASA NTRS1971

Terrestrial and lunar analogues of Martian topography

Comparison of Martian tectonic and topographic features with earth and moon based on Mariner 6 and 7 photographs

Lowman, P. D., Jr.↗

NASA NTRS2014

Global Characteristics of Porosity and Density Stratification Within the Lunar Crust from GRAIL Gravity and Lunar Orbiter Laser Altimeter Topography Data

The Gravity Recovery and Interior Laboratory (GRAIL) mission is providing unprecedentedly high-resolution gravity data. The gravity signal in relation to topography decreases from 100 km to 30 km wavelength, equivalent to a uniform crustal density of 2450 kg/cu m that is 100 kg/cu m smaller than the density required at 100 km. To explain such frequency-dependent behavior, we introduce rock compaction models under lithostatic pressure that yield radially stratified porosity (and thus density) and examine the depth extent of porosity. Our modeling and analysis support the assertion that the crustal density must vary from surface to deep crust by up to 500 kg/cu m. We found that the surface density of mega regolith is around 2400 kg/cu m with an initial porosity of 10-20%, and this porosity is eliminated at 10-20 km depth due to lithostatic overburden pressure. Our stratified density models provide improved fits to both GRAIL primary and extended mission data.

Density↗

NASA NTRS1999

The Lunar Crustal Thickness from Analysis of the Lunar Prospector Gravity and Clementine Topography Datasets

UNKNOWN

Lunar↗

NASA NTRS2002

An Imaging Laser Altimeter for Lunar Scientific Exploration

A new approach to laser altimetry is offered by the development of micro-lasers and pixilated detectors that enable very high resolution measurement of topography and relatively wide swath observations. An imaging altimeter with a 8x8 array detector working at a probability of less than a single photon/shot could map the Moon or similar sized body in approximately 2 years and provide 5 meter horizontal resolution topography and a 10 centimeter vertical accuracy. In addition, it would provide surface roughness and surface slopes on similar length scales of 5 meters and be able to address a range of problems for which topography or lunar shape is important at the decimeter level. This includes the topography of the polar regions, where ice is thought to have been identified, and also the cratering history of the Moon which could be assessed with a dataset of uniform quality and high resolution.

Source record↗

NASA NTRS2002

An Imaging Laser Altimeter for Lunar Scientific Exploration

Smith, David E.↗

NASA NTRS2008

The Effects of Terrain and Navigation on Human Extravehicular Activity Walkback Performance on the Moon

Results of the EVA Walkback Test showed that 6 male astronauts were able to ambulate 10 km on a level treadmill while wearing a prototype EVA suit in simulated lunar gravity. However, the effects of lunar terrain, topography, and real-time navigation on ambulation performance are unknown. Primary objective: To characterize the effect of lunar-like terrain and navigation on VO2 and distance traveled during an unsuited 10 km (straight-line distance) ambulatory return in earth gravity.

Norcross, Jason↗

NASA NTRS1966

Lunar slope angles and surface roughness from Ranger photographs.

Errors in estimates of lunar crater slope angles and surface roughness in Ranger VII and Ranger VIII pictures due to interpretation of dark areas as shadows

TOPOGRAPHY↗

NASA NTRS2008

Lagrangian Trajectory Modeling of Lunar Dust Particles

Apollo landing videos shot from inside the right LEM window, provide a quantitative measure of the characteristics and dynamics of the ejecta spray of lunar regolith particles beneath the Lander during the final 10 [m] or so of descent. Photogrammetry analysis gives an estimate of the thickness of the dust layer and angle of trajectory. In addition, Apollo landing video analysis divulges valuable information on the regolith ejecta interactions with lunar surface topography. For example, dense dust streaks are seen to originate at the outer rims of craters within a critical radius of the Lander during descent. The primary intent of this work was to develop a mathematical model and software implementation for the trajectory simulation of lunar dust particles acted on by gas jets originating from the nozzle of a lunar Lander, where the particle sizes typically range from 10 micron to 500 micron. The high temperature, supersonic jet of gas that is exhausted from a rocket engine can propel dust, soil, gravel, as well as small rocks to high velocities. The lunar vacuum allows ejected particles to travel great distances unimpeded, and in the case of smaller particles, escape velocities may be reached. The particle size distributions and kinetic energies of ejected particles can lead to damage to the landing spacecraft or to other hardware that has previously been deployed in the vicinity. Thus the primary motivation behind this work is to seek a better understanding for the purpose of modeling and predicting the behavior of regolith dust particle trajectories during powered rocket descent and ascent.

Lane, John E.↗

NASA NTRS1962