SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Satellite remote sensing technology is overviewed with particular emphasis on the present and planned LANDSAT satellite systems. Satellite-borne instrumentation and their capabilities are discussed including multispectral scanners, return beam vidicons, the thermal inertia mapper, and STEREOSAT instrumentation.
The Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) project is creating a record of forest disturbance and regrowth for North America from the Landsat satellite record, in support of the carbon modeling activities. LEDAPS relies on the decadal Landsat GeoCover data set supplemented by dense image time series for selected locations. Imagery is first atmospherically corrected to surface reflectance, and then change detection algorithms are used to extract disturbance area, type, and frequency. Reuse of the MODIS Land processing system (MODAPS) architecture allows rapid throughput of over 2200 MSS, TM, and ETM+ scenes. Initial ("Beta") surface reflectance products are currently available for testing, and initial continental disturbance products will be available by the middle of 2006.
The advent of the Landsat Data Continuity Mission (LDCM), currently with a launch readiness date of December, 2012, will see evolutionary changes in the Landsat data products available from the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. The USGS initiated a revolution in 2009 when EROS began distributing Landsat data products at no cost to requestors in contrast to the past practice of charging the cost of fulfilling a request; that is, charging $600 per Landsat scene. To implement this drastic change, EROS terminated data processing options for requestors and began to produce all data products using a consistent processing recipe. EROS plans to continue this practice for the LDCM and will required new algorithms to process data from the LDCM sensors. All previous Landsat satellites flew multispectral scanners to collect image data of the global land surface. Additionally, Landsats 4, 5, and 7 flew sensors that acquired imagery for both reflective spectral bands and a single thermal band. In contrast, the LDCM will carry two pushbroom sensors; the Operational Land Imager (OLI) for reflective spectral bands and the Thermal InfraRed Sensor (TIRS) for two thermal bands. EROS is developing the ground data processing system that will both calibrate and correct the data from the thousands of detectors employed by the pushbroom sensors and that will also combine the data from the two sensors to create a single data product with registered data for all of the OLI and TIRS bands.
Since the systematic use of earth surface data collection by orbital sensor systems started in 1972 with the launching of the North American LANDSAT satellite, a great effort has been made to assimilate, develop and transfer remote sensing technology (data acquisition and analysis) in its many applications in Brazil. The availability of sensor systems and existing data is considered approached, as well as those which will soon be available to the Brazilian researchers. The new systems of the LANDSAT-4, of the Columbia space shuttle and of the French satellites of the SPOT series are discussed. Some characteristics of the sensor system for the first Brazilian remote sensing satellite, to be launched by the end of the decade, are presented. Some LANDSAT-4 and SPOT simulation products are shown, emphasizing how the data obtained by these new satellites can be applied.
The study deals with the integration of a practical information resource - data from the earth orbiting satellite Landsat - with alternate forms of data to structure a state resource data base. State use of Landsat data within a comprehensive resource management scheme is examined. The efforts of NASA in the transfer of this space technology to state resource management applications are outlined. The role two nongovernmental sectors, universities and private industry, play in assisting states to develop Landsat data analysis capability is described.
Landsat satellites have acquired single-band thermal images since 1978. The next satellile in the heritage, Landsat Data Continuity Mission (LDCM), is scheduled to launch in December 2012. LDCM will contain the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS), where TIRS operates in concert with, but independently of OLI. This paper will provide an overview of the remote sensing instrument TIRS. The T1RS instrument was designed at National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC) where it will be fabricated and calibrated as well. Protecting the integrity of the Scientific Data that will be collected from TIRS played a strong role in definition of the calibration test equipment and procedures used for the optical, radiometric, and spatial calibration. The data that will be produced from LCDM will continue to be used world wide for environment monitoring and resource management.
The Perseids are one of the more prolific annual showers, known for high rates and for producing bright meteors. Outbursts of this shower have been noted in the 1860s, the early 1990s, 2004, and 2009, with the 1993 outburst being especially active (peak ZHR above 300). The 1993 Perseids also affected the space-faring nations, as the launch of the STS-51 mission was delayed by NASA until after the shower maximum due to an inability to predict the shower intensity, and the ESA telecommunications satellite Olympus suffered a mission-ending anomaly attributed to a static discharge caused by a Perseid impact [1]. Rates were again high (peak ZHR around 200) in 2009, when the NASA/USGS imaging satellite Landsat-5 experienced a gyro anomaly just before the shower peak; however in this case, the satellite was recovered and normal operations resumed one week later [2]. It is interesting to note that both spacecraft anomalies were not what is typically expected from meteoroid strikes, i.e., physical damage or an attitude displacement due to transfer of momentum. It would appear that the very fast Perseids (59 km s(sup -1) have a marked ability to produce plasma upon impact, which can then serve as a conductive path for discharge currents. The shower is expected to outburst again in 2016, and we present the results from the MSFC Meteoroid Stream Model [4], which predicts enhanced activity on a level similar to that of 2009 as the Earth passes through several debris trails on the night of August 11-12 (UT). We then compare our results to those of other modelers.
The role data from the first three LANDSAT satellites have in geologic exploration and their current level of acceptance is reviewed and the advantages of LANDSAT 4 TM data over MSS data are discussed. Specially enhanced Thematic Mapper imager can make a very significant contribution to the oil and gas and mineral exploration industries. The TM's increased spatial resolution enables the production of larger scale imagery, which greatly increases the amount of geomorphic and structural information interpretable. TM's greater spectral resolution, combined with the smaller, more homogeneous pixels, should enable a far greater confidence in mapping lithologies and detecting geobotanical anomalies from space. The results from its applications to hydrocarbon and mineral exploration promise to bring the majority of the geologic exploration community into that final stage of acceptance and routine application of the satellite data.
The Global Positioning System (GPS) is a worldwide system of navigation data satellites currently being deployed by the United States for land, sea, air and space-borne users. Currently several development satellites have been launched for system evaluation. Eventually the system will include 18 operational satellites. The GPS system utilizes precision clocks to allow users to measure the one-way propagation delay of navigational signals from the satellites, so that users can infer their position by decoding the navigation signal and observing the delay from several satellites. Landsat-4 is the first spacecraft to carry a GPS navigation system into orbit. This paper describes the Landsat-4 GPS experiment, Landsat-4 requirements for ephemeris data and the in-flight performance of the system.
The Department of the Interior (DOI) has the responsibility to preserve and to distribute most Landsat Thematic Mapper (TM) and Multispectral Scanner (MSS) data that have been acquired by the five Landsat satellites operational since July 1972. Data that are still covered by exclusive marketing rights, which were granted by the U.S. Government to the commercial Landsat operator, cannot be distributed by the DOI. As the designated national archive for Landsat data, the U.S. Geological Survey's EROS Data Center (EDC) has initiated two new programs to protect and make available any of the 625,000 MSS scenes currently archived and the 200,000 TM scenes to be archived at EDC by 1995. A specially configured system has begun converting Landsat MSS data from obsolete high density tapes (HDT's) to more dense digital cassette tapes. After transcription, continuous satellite swaths are (1) divided into standard scenes defined by a world reference system, (2) geographically located by latitude and longitude, and (3) assessed for overall quality. Digital browse images are created by subsampling the full-resolution swaths. Conversion of the TM HDT's will begin in the fourth quarter of 1992 and will be conducted concurrently with MSS conversion. Although the TM archive is three times larger than the entire MSS archive, conversion of data from both sensor systems and consolidation of the entire Landsat archive at EDC will be completed by the end of 1994. Some MSS HDT's have deteriorated, primarily as a result of hydrolysis of the pigment binder. Based on a small sample of the 11 terabytes of post-1978 MSS data and the 41 terabytes of TM data to be converted, it appears that to date, less than 2 percent of the data have been lost. The data loss occurs within small portions of some scenes; few scenes are lost entirely. Approximately 10,000 pre-1979 MSS HDT's have deteriorated to such an extent, as a result of hydrolysis, that the data cannot be recovered without special treatment of the tapes. An independent consulting division of a major tape manufacturer has analyzed affected tapes and is confident that restorative procedures can be applied to the HDT's to permit one pass to reproduce the data on another recording media. A system to distribute minimally processed Landsat data will be procured in 1992 and will be operational by mid-1994. Any TM or MSS data in the national archive that are not restricted by exclusive marketing rights will be reproduced directly from the archive media onto user specified computer-compatible media. TM data will be produced either at a raw level (radiometrically and geometrically uncorrected) or at an intermediate level (radiometrically corrected and geometrically indexed). MSS data will be produced to an intermediate level or to a fully corrected level (radiometrically corrected and geometrically transformed to an Oblique Mercator projection). The system will be capable of providing ordered scenes within 48 hours of receipt of order.
The results of an investigation of the performance of three basic precision pointing and tracking control subsystems considered for application to satellite to satellite optical communication missions are discussed. The three-control subsystems include: (1) gyro-stabilized, (2) mass-stabilized and (3) complementary filter. The sources of error included in the analysis included: (1) sensor noise from the optical detector, (2) host satellite baseframe vibrational noise and (3) frictional and bearing noise. The measured vibrational and disturbance data from the LANDSAT satellite was used to generate the power spectral density parameter needed to model the baseframe noise environments of the two satellites used for the evaluation. The results of the study indicate that the 1 microradian rms pointing and tracking accuracy may be achieved with either the gyro-stabilized or the complementary filter approach.
Forest disturbances are thought to play a major role in controlling land-atmosphere fluxes of carbon. Under the auspices of the North American Carbon Program, the LEDAPS (Landsat Ecosystem Disturbance Adaptive Processing System) and NACP-FIA projects have been analyzing the Landsat satellite record to assess rates of forest disturbance across North America. In the LEDAPS project, wall-to-wall Landsat imagery for the period 1975-2000 has been converted to surface reflectance and analyzed for decadal losses (disturbance) or gains (regrowth) in biomass using a spectral "disturbance index". The NACP-FIA project relies on a geographic sample of dense Landsat image time series, allowing both disturbance rates and recovery trends to be characterized. Preliminary results for the 1990's indicate high rates of harvest within the southeastern US, Eastern Canada, and the Pacific Northwest, with spatially averaged (approx.50x50 km) turnover periods as low as 25-40 years. Lower rates of disturbance are found in the Rockies and Northeastern US.
Detection of water quality in Guanabara Bay using multispectral scanning digital data taken from LANDSAT satellites was examined. To test these processes, an empirical (statistical) approach was choosen to observe the degree of relationship between LANDSAT data and the in situ data taken simultaneously. The linear and nonlinear regression analyses were taken from among those developed by INPE in 1978. Results indicate that the major regression was in the number six MSS band, atmospheric effects, which indicated a correction coefficient of 0.99 and an average error of 6.59 micrograms liter. This error was similar to that obtained in the laboratory. The chlorophyll content was between 0 and 100 micrograms/liter, as taken from the MSS of LANDSAT.
Light coming from a cloud to the detector of a multispectral satellite (Landsat) consists of light reflected from the cloud and light scattered by the layer of atmosphere between the cloud and satellite. Because of the strong wavelength dependence of Rayleigh scattering, the comparison of the signals in two spectral channels allows one to find the thickness of the scattering layer and hence the height of the cloud top.
Ways of using meteorological satellite data to extend surface data are summarized. Temperature models are prepared from infrared data from ITOS/NOAA, NIMBUS, SMS/GOES, or future LANDSAT satellites. Using temperatures for surface meteorological stations as anchors, an adjustment is made to temperature values for each pixel in the model. The result is an image with an estimated temperature for each pixel. This provides an economical way of producing detailed temperature information for data-sparse areas, such as are found in underdeveloped countries. Related uses of these satellite data are also given, including the use of computer prepared cloud-free composites to extend climatic zones, and their use in discrimination of reflectivity-thermal regime zones.
Extreme drought from 2013 to 2015 has been linked to extensive tree dieback in the Sierra-Nevada region of California. Landsat satellite imagery was analysed for the region from Lake Tahoe to the southern Sequoia National Forest with the objective of understanding the patterns of tree mortality in the years of 2013 to 2015 and into the near-normal precipitation year of 2016. The main mapping results for Landsat moisture index differences from year-to-year showed that the highest coverage of tree dieback was located in the Sierra and Sequoia National Forests, at four to five times greater area each year than within any other National Park or National Forest unit. Since 2013, over 50% of the Sierra Nevada forest dieback area was detected in the mid elevation zone of 1000-2000 m. The total area of tree mortality in the lower elevation zone of 500-1000 m did not grow notably from 2015 to 2016. Within the largest California river drainages in the Sierra region, new tree mortality in 2015 was detected mainly below 1200 m elevation, whereas new tree mortality in 2016 was detected mainly at higher elevations, up to about 2200 m. In three out of the four years studied, results showed that about 60% of all new tree mortality areas were located on north-facing hill slopes.
Landsat satellite imagery is being used as the primary source of information on flooding in the Black River Basin of northern New York State. Landsat images (Band 7) depicting flood conditions during several flood seasons since 1973 were obtained for analysis. Visual interpretation of these images is providing the basis for quantitatively relating in situ measurements of river discharge with the total area and geographic locations of inundation. This, in turn, will provide real-time estimation of flood losses over the entire river basin. This practical and inexpensive approach can provide sufficiently reliable information, and is applicable in other similar river basins.
Ground surveys and aerial observations were used to monitor rapidly changing moisture conditions in the Salt-Verde watershed. Repetitive satellite snow cover observations greatly reduce the necessity for routine aerial snow reconnaissance flights over the mountains. High resolution, multispectral imagery provided by LANDSAT satellite series enabled rapid and accurate mapping of snow-cover distributions for small- to medium-sized subwatersheds; however, the imagery provided only one observation every 9 days of about a third of the watershed. Low resolution imagery acquired by the ITOSa dn SMS/GOES meteorological satellite series provides the daily synoptic observation necessary to monitor the rapid changes in snow-covered area in the entire watershed. Short term runoff volumes can be predicted from daily sequential snow cover observations.