Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level set methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Third moments of nucleon unpolarized, polarized, and transversity parton distribution functions from physical-point lattice QCD

Using forward matrix elements of local leading-twist operators, we present a determination of the isovector third Mellin moments ⟨𝑥 2 ⟩ of nucleon unpolarized, polarized, and transversity parton distribution functions. Two lattice QCD ensembles at the physical pion mass are used, which were generated using a tree-level Symanzik-improved gauge action and 2+1 flavor tree-level improved Wilson Clover fermions coupling via 2-level HEX-smearing. Leveraging a wide set of operators, two extraction methods for the matrix elements, and the automatic inclusion of model uncertainties via bootstrapped model averages, we extract values of the third Mellin moments. Furthermore, this is the first direct calculation of these observables performed at the physical pion mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1975

Review of Terrestrial Photovoltaic Measurements Workshop

Measurement methods for terrestrial solar cells require calibration standards to set simulator irradiance levels or to monitor solar irradiance in outdoor measurements. Measurements of solar cell performance in terrestrial sunlight are the most acceptable, but an artificial light source can be used for laboratory measurements.

Brandhorst, H. W., Jr.↗
NASA NTRS1981

Using rewards and penalties to obtain desired subject performance

Operant conditioning procedures, specifically the use of negative reinforcement, in achieving stable learning behavior is described. The critical tracking test (CTT) a method of detecting human operator impairment was tested. A pass level is set for each subject, based on that subject's asymptotic skill level while sober. It is critical that complete training take place before the individualized pass level is set in order that the impairment can be detected. The results provide a more general basis for the application of reward/penalty structures in manual control research.

Cook, M.↗
NASA NTRS1988

Extensions of the CSCM methodology for nonequilibrium reacting gas flows

The paper describes the extension of the CSCM flux difference splitting to produce conservative unconditionally stable implicit upwind methods for the extended equation set. The CSCM-S single data level relaxation algorithm is argued to be particularly advantageous for efficiently solving the set of equations. Attention is given to issues of alternative state variable representations and to complementary thermodynamic relations that parameterize and need to be effectively coupled with the solution procedure for the partial differential equations. Within the framework of iteration, consideration is given to more efficient approximate solution procedures than the full block coupled LU decomposition. Results of early numerical experiments are given to illustrate the developments.

Lombard, C. K.↗
NASA NTRS1965

Lower Bounds for the Energy Levels of Anharmonic Oscillators

The lower‐bounds method presented by Löwdin in the preceding paper has been applied to oscillators perturbed by third‐ and fourth‐power terms in the potential‐energy expression. For favorable cases agreement between upper and lower bounds is easily carried to many more figures than are likely to be physically significant. In many cases the lower bounds agreed more closely to the true eigenvalue than did the corresponding upper bounds. For a given basis set, this method gives closer bounds than that of Bazley and Fox, except for energy levels too high to be satisfactorily treated in the given basis. The only disadvantage found was that for close bounds double precision proved necessary, indicating more than ordinary loss of computational accuracy.

Reid, Charles E.↗
NASA NTRS1993

Predesign of diamond turned refractive/diffractive elements for IR objectives

Diffractive lenses have arrived. Literally hundreds of papers have been published and technology impact reports have been written about the exciting addition of a new tool for the lens designer. Sophisticated computer programs have been developed to aid in the optimization of these diffractive phase profiles for a wide variety of applications. Now, several fabrication methods are being pursued to produce these diffractive elements economically. The best known process is the etching of a multi-level relief grating, known as binary optics. This process uses sets of computer generated lithographic masks. Another, more recently developed method is Dry Photopolymer Embossing (DPE). This replication process uses master holograms. And now, diamond turning is being applied for the machining of these elements. Diamond turning is especially well suited for infrared optics. As any process has advantages and limitations, so has diamond turning. These advantages and limitations are discussed and general guidelines are presented to aid the designer and systems engineer in the project predesign stage.

Riedl, Max J.↗
NASA NTRS1994

Computational studies of metal-metal and metal-ligand interactions

Accurate calculations on the bond length, dipole moment, and harmonic frequency of CO are presented, using large basis sets and high levels of electron correlation. The geometric structure, force constants and binding energies of Cr(C0)6 and Cr(CO)5 are computed using large basis sets and high levels of electron correlation. The molecule 04(+) is studied, using large basis sets and high levels of electron correlation, including the CASSCF, CASSI and CASPT2 methods. Binding energies, geometries and frequencies are computed. Symmetry breaking is a particular problem for the antisymmetric stretch, which is addressed using the CASSI method. The symmetry breaking problem in 04(+) has also been studied using the Brueckner coupled cluster method. This gives results in good agreement with CASSI. A multi-region numerical integration scheme is investigated for use in Density Functional Calculations. This scheme is found to give comparable results to a widely used scheme based on the Euler-Maclaurin technique.

Barnes, Leslie A.↗
NASA NTRS1994

Computational studies of metal-metal and metal-ligand interactions

Accurate calculations on the bond length, dipole moment, and harmonic frequency of CO are presented, using large basis sets and high levels of electron correlation. The geometric structure, force constants and binding energies of Cr(CO)6 and Cr(CO)5 are computed using large basis sets and high levels of electron correlation. The molecule O4(+) is studied, using large basis sets and high levels of electron correlation, including the CASSCF, CASSI,and CASPT2 methods. Binding energies, geometries and frequencies are computed. Symmetry breaking is a particular problem for the antisymmetric stretch, which is addressed using the CASSI method. The symmetry breaking problem in O4(+) has also been studied using the Brueckner coupled-cluster method. This gives results in good agreement with CASSI. A multi-region numerical integration scheme is investigated for use in Density Functional Calculations. This scheme is found to give comparable results to a widely used scheme based on the Euler-Maclaurin technique.

Barnes, Leslie A.↗
NASA NTRS2003

Resource Management for Real-Time Adaptive Agents

Increased autonomy and automation in onboard flight systems offer numerous potential benefits, including cost reduction and greater flexibility. The existence of generic mechanisms for automation is critical for handling unanticipated science events and anomalies where limitations in traditional control software with fixed, predetermined algorithms can mean loss of science data and missed opportunities for observing important terrestrial events. We have developed such a mechanism by adding a Hierarchical Agent-based ReaLTime technology (HART) extension to our Dynamic Resource Management (DRM) middleware. Traditional DRM provides mechanisms to monitor the realtime performance of distributed applications and to move applications among processors to improve real-time performance. In the HART project we have designed and implemented a performance adaptation mechanism to improve reaktime performance. To use this mechanism, applications are developed that can run at various levels of quality. The DRM can choose a setting for the quality level of an application dynamically at run-time in order to manage satellite resource usage more effectively. A groundbased prototype of a satellite system that captures and processes images has also been developed as part of this project to be used as a benchmark for evaluating the resource management framework A significant enhancement of this generic mission-independent framework allows scientists to specify the utility, or "scientific benefit," of science observations under various conditions like cloud cover and compression method. The resource manager then uses these benefit tables to determine in redtime how to set the quality levels for applications to maximize overall system utility as defined by the scientists running the mission. We also show how maintenance functions llke health and safety data can be integrated into the utility framework. Once thls framework has been certified for missions and successfully flight tested it can be reused with little development overhead for other missions. In contrast, current space missions llke Swift manage similar types of resource trade -off completely with the scientific application code itself, and such code must be re-certified and tested for each mission even if a large portion of the code base is shared. This final report discusses some of the major issues motivating this research effort, provides a literature review of the related work, discusses the resource management framework and ground-based satellite system prototype that has been developed, indicates what work is yet to be performed, and provides a list of publications resulting from this work.

Welch, Lonnie↗
NASA NTRS1984

A multilevel method for structural synthesis

A multilevel method for structural synthesis based on finite element modeling at both the system and the substructure level is set forth. At the system level, the design is described using basis vectors generated via substructure design modification. Whenever possible, substructure constraints are satisfied via local material redistribution. At both the system level and the substructure level, design modification is carried out by solving a sequence of approximate problems. The method generates upper bound approximations for the optimum design and it has potential for substantial gains in computational efficiency, because the uncoupled substructure design modification problems can be processed in parallel.

Schmit, L. A.↗
DOE OSTI2024

Machine Learning Classification Strategy to Improve Streamflow Estimates in Diverse River Basins in the Colorado River Basin

Streamflow in the Colorado River Basin (CRB) is significantly altered by human activities including land use/cover alterations, reservoir operation, irrigation, and water exports. Climate is also highly varied across the CRB which contains snowpack-dominated watersheds and arid, precipitation-dominated basins. Recently, machine learning methods have improved the generalizability and accuracy of streamflow models. Previous successes with LSTM modeling have primarily focused on unimpacted basins, and few studies have included human impacted systems in either regional or single-basin modeling. We demonstrate that the diverse hydrological behavior of river basins in the CRB are too difficult to model with a single, regional model. We propose a method to delineate catchments into categories based on the level of predictability, hydrological characteristics, and the level of human influence. Lastly, we model streamflow in each category with climate and anthropogenic proxy data sets and use feature importance methods to assess whether model performance improves with additional relevant data. Overall, land use cover data at a low temporal resolution was not sufficient to capture the irregular patterns of reservoir releases, demonstrating the importance of having high-resolution reservoir release data sets at a global scale. On the other hand, the classification approach reduced the complexity of the data and has the potential to improve streamflow forecasts in human-altered regions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

New York City Panel on Climate Change 2019 Report Chapter 4: Coastal Flooding

Coastal flooding from storm surge is one of the most dangerous and damaging natural hazards that societies face. It was responsible for half of all hurricane related mortalities in the United States from 1963 to 2012, far more than any other factor. Coastal extreme water levels are increasing globally, mainly driven by rises in mean sea level. Sea level rise is also causing rapid increases in the annual number of shallow “nuisance floods” for low-lying neighborhoods. The objectives of this chapter are to review the latest knowledge on New York City flood risk from storms and tides, and to evaluate how climate change will affect this risk between now and the end of the century. Methods used by NPCC (2015) for assessing storm-driven extreme floods are generally repeated here, including the use of the Federal Emergency Management Agency (FEMA, 2013) baseline flood hazards (e.g., the 100-year flood(sup a)) and the methods for adding sea level rise and mapping the resulting hazard. New advancements include an innovative analysis of monthly tidal flooding based on a dynamic model, a broadened set of sea level rise scenarios supplemented with the Antarctic Rapid Ice Melt (ARIM) scenario (see Chapter 3), and sensitivity analyses that show how differing methods would affect our results. Wind is a primary factor for coastal storm surge, and a brief review is given in Appendix 4.A, with the latest scientific knowledge on what drives extreme wind events in the New York City area and how they may change in the future.

Orton, Philip↗
NASA NTRS2013

Uncertainties in Atomic Data and Their Propagation Through Spectral Models. I.

We present a method for computing uncertainties in spectral models, i.e., level populations, line emissivities, and emission line ratios, based upon the propagation of uncertainties originating from atomic data.We provide analytic expressions, in the form of linear sets of algebraic equations, for the coupled uncertainties among all levels. These equations can be solved efficiently for any set of physical conditions and uncertainties in the atomic data. We illustrate our method applied to spectral models of Oiii and Fe ii and discuss the impact of the uncertainties on atomic systems under different physical conditions. As to intrinsic uncertainties in theoretical atomic data, we propose that these uncertainties can be estimated from the dispersion in the results from various independent calculations. This technique provides excellent results for the uncertainties in A-values of forbidden transitions in [Fe ii]. Key words: atomic data - atomic processes - line: formation - methods: data analysis - molecular data - molecular processes - techniques: spectroscopic

linear sets↗
NASA NTRS1993

A multi-level solution algorithm for steady-state Markov chains

A new iterative algorithm, the multi-level algorithm, for the numerical solution of steady state Markov chains is presented. The method utilizes a set of recursively coarsened representations of the original system to achieve accelerated convergence. It is motivated by multigrid methods, which are widely used for fast solution of partial differential equations. Initial results of numerical experiments are reported, showing significant reductions in computation time, often an order of magnitude or more, relative to the Gauss-Seidel and optimal SOR algorithms for a variety of test problems. The multi-level method is compared and contrasted with the iterative aggregation-disaggregation algorithm of Takahashi.

Horton, Graham↗
NASA NTRS1983

The special effort processing of FGGE data

The basic FGGE level IIb data set was enhanced. It focused on removing deficiencies in the objective methods of quality assurance, removing efficiencies in certain types of operationally produced satellite soundings, and removing deficiencies in certain types of operationally produced cloud tracked winds. The Special Effort was a joint NASA-NOAA-University of Wisconsin effort. The University of Wisconsin installed an interactive McIDAS capability on the Amdahl computer at the Goddard Laboratory of Atmospheric Sciences (GLAS) with one interactive video terminal at Goddard and the other at the World Weather Building. With this interactive capability a joint processing effort was undertaken to reprocess certain FGGE data sets. NOAA produced a specially edited data set for the special observing periods (SOPs) of FGGE. NASA produced an enhanced satellite sounding data set for the SOPs while the University of Wisconsin produced an enhanced cloud tracked wind set from the Japanese geostationary satellite images.

Source record↗
NASA NTRS1989

The determination of accurate dipole polarizabilities alpha and gamma for the noble gases

The static dipole polarizabilities alpha and gamma for the noble gases helium through xenon were determined using large flexible one-particle basis sets in conjunction with high-level treatments of electron correlation. The electron correlation methods include single and double excitation coupled-cluster theory (CCSD), an extension of CCSD that includes a perturbational estimate of connected triple excitations, CCSD(T), and second order perturbation theory (MP2). The computed alpha and gamma values are estimated to be accurate to within a few percent. Agreement with experimental data for the static hyperpolarizability gamma is good for neon and xenon, but for argon and krypton the differences are larger than the combined theoretical and experimental uncertainties. Based on our calculations, we suggest that the experimental value of gamma for argon is too low; adjusting this value would bring the experimental value of gamma for krypton into better agreement with our computed result. The MP2 values for the polarizabilities of neon, argon, krypton and zenon are in reasonabe agreement with the CCSD and CCSD(T) values, suggesting that this less expensive method may be useful in studies of polarizabilities for larger systems.

Rice, Julia E.↗
NASA NTRS2021

A Systematic Approach to Developing Paths Towards Airborne Vehicle Autonomy

Advanced Air Mobility (AAM) demands greater levels of aircraft autonomy than are currently implemented today. To enable this requirement, novel aircraft functionalities and technologies as well as supporting airworthiness and operational regulations are required. A structured method to derive a comprehensive list of aircraft level decision-making functions is defined and applied. The resulting function set is programmed into an ontology, and enables autonomous decision-making through the application of a defined decision-making process. Paths to implementing the functions are generated by applying a structured four step method. By surveying current technologies, airspace, procedures and regulations, the paths generation method defines incremental paths to autonomy that the current regulatory environment can support. Opportunities to implement novel technologies and functions are identified, and regulatory mechanisms supporting their implementation are underscored. The analysis provides the tools to further define aircraft functions and paths to their implementation, while demonstrating that for particular use cases, aircraft autonomy is attainable in the medium-term.

Paul Vajda↗
NASA NTRS2010

Peak Wind Tool for General Forecasting

The expected peak wind speed of the day is an important forecast element in the 45th Weather Squadron's (45 WS) daily 24-Hour and Weekly Planning Forecasts. The forecasts are used for ground and space launch operations at the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45 WS also issues wind advisories for KSC/CCAFS when they expect wind gusts to meet or exceed 25 kt, 35 kt and 50 kt thresholds at any level from the surface to 300 ft. The 45 WS forecasters have indicated peak wind speeds are challenging to forecast, particularly in the cool season months of October - April. In Phase I of this task, the Applied Meteorology Unit (AMU) developed a tool to help the 45 WS forecast non-convective winds at KSC/CCAFS for the 24-hour period of 0800 to 0800 local time. The tool was delivered as a Microsoft Excel graphical user interface (GUI). The GUI displayed the forecast of peak wind speed, 5-minute average wind speed at the time of the peak wind, timing of the peak wind and probability the peak speed would meet or exceed 25 kt, 35 kt and 50 kt. For the current task (Phase II ), the 45 WS requested additional observations be used for the creation of the forecast equations by expanding the period of record (POR). Additional parameters were evaluated as predictors, including wind speeds between 500 ft and 3000 ft, static stability classification, Bulk Richardson Number, mixing depth, vertical wind shear, temperature inversion strength and depth and wind direction. Using a verification data set, the AMU compared the performance of the Phase I and II prediction methods. Just as in Phase I, the tool was delivered as a Microsoft Excel GUI. The 45 WS requested the tool also be available in the Meteorological Interactive Data Display System (MIDDS). The AMU first expanded the POR by two years by adding tower observations, surface observations and CCAFS (XMR) soundings for the cool season months of March 2007 to April 2009. The POR was expanded again by six years, from October 1996 to April 2002, by interpolating 1000-ft sounding data to 100-ft increments. The Phase II developmental data set included observations for the cool season months of October 1996 to February 2007. The AMU calculated 68 candidate predictors from the XMR soundings, to include 19 stability parameters, 48 wind speed parameters and one wind shear parameter. Each day in the data set was stratified by synoptic weather pattern, low-level wind direction, precipitation and Richardson Number, for a total of 60 stratification methods. Linear regression equations, using the 68 predictors and 60 stratification methods, were created for the tool's three forecast parameters: the highest peak wind speed of the day (PWSD), 5-minute average speed at the same time (A WSD), and timing of the PWSD. For PWSD and A WSD, 30 Phase II methods were selected for evaluation in the verification data set. For timing of the PWSD, 12 Phase\I methods were selected for evaluation. The verification data set contained observations for the cool season months of March 2007 to April 2009. The data set was used to compare the Phase I and II forecast methods to climatology, model forecast winds and wind advisories issued by the 45 WS. The model forecast winds were derived from the 0000 and 1200 UTC runs of the 12-km North American Mesoscale (MesoNAM) model. The forecast methods that performed the best in the verification data set were selected for the Phase II version of the tool. For PWSD and A WSD, linear regression equations based on MesoNAM forecasts performed significantly better than the Phase I and II methods. For timing of the PWSD, none of the methods performed significantly bener than climatology. The AMU then developed the Microsoft Excel and MIDDS GUls. The GUIs display the forecasts for PWSD, AWSD and the probability the PWSD will meet or exceed 25 kt, 35 kt and 50 kt. Since none of the prediction methods for timing of the PWSD performed significantly better thanlimatology, the tool no longer displays this predictand. The Excel and MIDDS GUIs display forecasts for Day-I to Day-3 and Day-I to Day-5, respectively. The Excel GUI uses MesoNAM forecasts as input, while the MIDDS GUI uses input from the MesoNAM and Global Forecast System model. Based on feedback from the 45 WS, the AMU added the daily average wind speed from 30 ft to 60 ft to the tool, which is one of the parameters in the 24-Hour and Weekly Planning Forecasts issued by the 45 WS. In addition, the AMU expanded the MIDDS GUI to include forecasts out to Day-7.

Barrett, Joe H., III↗