SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigation of the properties of low-energy particles measured on board ATS-5 show that the synchronous spacecraft can charge to -12,000 V in eclipse, and several hundred volts in sunlight. Differential charging can produce local fields of several thousands of volts per meter in the near vicinity of the spacecraft surface. Time constants for charging can be less than a second to tens of minutes.
The ionization of neutral atoms in the lunar atmosphere produces an ionosphere around the moon. These ions are accelerated by the interplanetary electric field and local surface fields to energies of 10 to 500 eV. The Suprathermal Ion Detector Experiment (SIDE) has been observing these ions from the lunar atmosphere. The observations have been divided into four categories based on the acceleration mechanism.
Models of lunar magnetism have involved dynamo action in a fluid core in an early hot moon; an early cold moon magnetized some time before 4 billion years ago, which has subsequently heated up; and local field sources which, in some models, are related to impact. The present work examines the second possibility and shows that, provided the moon contained a few percent of metallic iron and was exposed to an extra-lunar field of about 10 or 20 oersted while much of it was still below the Curie point of iron, a restricted class of thermal evolution models, which satisfy the known constraints, can be derived.
The frequency distributions of the first six Lyman lines of hydrogenlike carbon, oxygen, neon, magnesium, aluminum, and silicon ions broadened by the local fields of both ions and electrons are calculated for dense plasmas. The electron collisions are treated by an impact theory allowing (approximately) for level splittings caused by the ion fields, finite duration of the collisions, and screening of the electron fields. These calculations are fully quantum mechanical and include the full Coulomb interaction. Ion effects are calculated in the quasistatic, linear-Stark-effect approximation, using distribution functions of Hooper and Tighe which include correlation and shielding effects. Theoretical uncertainties from the various approximations are estimated, and the scaling of the profiles with density, temperature, and nuclear charge is discussed. A correction for the effects caused by low-frequency field fluctuations is suggested.
The synchronous altitude satellite ATS 1 data and near-conjugate measurements of bremsstrahlung X-rays and ground magnetic variations were used to analyze an event of modulated auroral zone electron precipitation and magnetic pulsations in the Pc range. Transverse, azimuthal, nearly linearly polarized waves observed at ATS 1, ground magnetic pulsations at College, Alaska, and intervals of modulated electron precipitation centered on local magnetic moon, and noted in the X-ray data from Fort Yukon, Alaska, are discussed, noting that the origin of the Pc 3 waves is attributed to local field line resonances induced by Kelvin-Helmholtz instability at the magnetopause. The wave resonance model can explain observed differences in the pulsation activity at the ground, balloon, and satellite if account is taken of the spatial sensitivities of the techniques and the location of observing sites with respect to the probable location of resonant field lines. The data suggest that electron precipitation pulsations will correlate with Pc 3 magnetic pulsations when substorm injections coupled with azimuthal drift provide enhanced energetic particle fluxes with dayside resonance regions.
Low-energy electron magnetometer is suitable for terrestrial and aerial applications. Electron beam strikes tantalum collector plates in device, amplifying current and converting it to frequency. Current difference increases with beam deflection, providing measure of local field strength. LEEM operation requires no liquid helium unlike superconducting quantum interference device. LEEM sensitivity compares favorably with that of optical absorption magnetometers, and microsecond response range makes analyzing fast magnetic transients and signatures possible.
A comparison of one- and two-dimensional simulations of the strong turbulence evolution of Lagmuir waves such as would be generated by the kinetic beam-plasma instability is reported. It is shown that the initial formation of the localized fields is one dimensional.
Fukui et al. (1979) and Stegeman et al. (1982) have shown theoretically that surface plasmon polaritons can be guided over long distances by thin metal films bounded by identical dielectric media. In principle, the possibility arises for the propagation of highly localized fields. In order to obtain long propagation distances, most of the energy will have to be carried outside the metal. THis makess it necessary to operate near the mode cutoff condition. In the present investigation, it is shown that very small air gaps between the metal and dielectric surfaces will cause the mode to become radiative, and, therefore, no longer bounded to the metal film. Calculations show that gaps of dimension 100 A and less can cause severe problems in geometries relying on long range surface plasmon polaritons. High refractive index liquids placed in the gaps should alleviate these problems.
Many good small scale facilities are available for rotorcraft noise research. Ames 40 x 80/80 x 120 probably is a good large scale facility for acoustic research of large or small rotorcraft, but the acoustic quality of the modified facility was not yet measured. DNW is probably the best aeroacoustic facility, but may be expensive. Other parameters to consider besides background noise are turbulent level and scale, restructed measurement field, local reflections, and speed range. Advanced measurement techniques improve data quality from any facility.
The experiments carried out at MIT during 1984 focussed on two aspects of Loran-C relative navigation that would impact system performance at the sub-microsecond level of accuracy: tracking loop bandwidth and localized field deformation. Figures are given to illustrate the results from both effects.
A local field stress technique, developed previously in a study of the Saturnian magnetosphere, is introduced to the problem of determining the radial force balance characteristics of Jupiter's magnetosphere. The near-equatorial, radial magnetic force densities are estimated using the data obtained by Voyager 1 principally on the dayside (inbound) portion of its trajectory. Using the low-energy charged particle data (greater than about 30 keV) and other published data, ways in which the field forces might be balanced are explored. Inside 22 Jupiter radii, the magnetic radial forces match, in both magnitude and radial variation, the hot particle pressure gradient forces, assuming a mix of H(+) and O(n+) ions. Outside 22 Jupiter radii, a previously reported force balance problem is confirmed qualitatively, and two possible solutions are suggested.
The stable tearing behavior of thin sheets 2024-T3 aluminum alloy was studied for middle crack tension specimens having initial cracks that were: flat cracks (low fatigue stress) and 45 degrees through-thickness slant cracks (high fatigue stress). The critical crack-tip-opening angle (CTOA) values during stable tearing were measured by two independent methods, optical microscopy and digital image correlation. Results from the two methods agreed well. The CTOA measurements and observations of the fracture surfaces showed that the initial stable tearing behavior of low and high fatigue stress tests is significantly different. The cracks in the low fatigue stress tests underwent a transition from flat-to-slant crack growth, during which the CTOA values were high and significant crack tunneling occurred. After crack growth equal to about the thickness, CTOA reached a constant value of 6 deg and after crack growth equal to about twice the thickness, crack tunneling stabilized. The initial high CTOA values, in the low fatigue crack tests, coincided with large three-dimensional crack front shape changes due to a variation in the through-thickness crack tip constraint. The cracks in the high fatigue stress tests reach the same constant CTOA value after crack growth equal to about the thickness, but produced only a slightly higher CTOA value during initial crack growth. For crack growth on the 45 degree slant, the crack front and local field variables are still highly three-dimensional. However, the constant CTOA values and stable crack front shape may allow the process to be approximated with two-dimensional models.
We derive the luminosity function for different morphological types in the original CfA Redshift Survey (CfA1) and in the first two slices of the CfA Redshift Survey Extension (CfA2). CfA1 is a complete sample containing 2397 galaxies distributed over 2.7 steradians with m(sub z) less than or equal 14.5. The first two complete slices of CfA2 contain 1862 galaxies distributed over 0.42 steradians with m(sub z)=15.5. The shapes of the E-S0 and spiral luminosity functions (LF) are indistinguishable. We do not confirm the steeply decreasing faint end in the E-S0 luminosity function found by Loveday et al. for an independent sample in the southern hemisphere. We demonstrate that incomplete classification in deep redshift surveys can lead to underestimates of the faint end of the elliptical luminosity function and could be partially responsible for the difference between the CfA survey and other local field surveys. The faint end of the LF for the Magellanic spirals and irregulars is very steep. The Sm-Im luminosity function is well fit by a Schechter function with M*=-18.79, alpha=-1.87, and phi*=0.6x10(exp -3) for M(sub z) less than or equal to -13. These galaxies are largely responsible for the excess at the faint end of the general CfA luminosity function. The abundance of intrinsically faint, blue galaxies nearby affects the interpretation of deep number counts. The dwarf population increases the expected counts at B=25 in a no-evolution, q(sub 0)=0.05 model by a factor of two over standard no-evolution estimates. These dwarfs change the expected median redshift in deep redshift surveys by less than 10 percent . Thus the steep Sm-Im LF may contribute to the reconciliation of deep number counts with deep redshift surveys.
The role of lower bybrid waesat the magnetopause is reexamined. It is found that for the maximum observed wave power, the lower hybrid waves are unstable to a modulational instability on the magnetosheath side of the magnetopause. The modulational instabitlity leads to localized field structures oriented predominantly along the magnetic field. Such patchy lower hybrid turbulence has been observed by some spacecraft. As a result of the large T(sub i)/T(sub e) ratio, the waves saturate by ion heating; as a result, unlike other settings (e.g. comets, critical ionization phenomena) energetic electrons are not expected. The stochasitc electron transport in the presence of such turbulence is analyzed and results in strongly anistropic electron diffusion, with the dominant direction across the magnetic field. The diffusion rate exceeds significantly that expected from quasi-linear considerations and, for magnetospause parameters, also exceeds the rate discussed by Sonnerup (1980).
Tail buffet studies were conducted on a full-scale, production, F/A-18 fighter aircraft in the 80- by 120-Foot Wind Tunnel of the National Full-Scale Aerodynamic Complex at NASA Ames Research Center at Moffett Field, California. Tail buffet data were acquired over an angle-of-attack range of +20 deg to +40 deg, a side-slip range of -16 deg to + 16 deg, and at wind speeds up to 100 knots. The maximum speed corresponds to a Reynolds number of l2.3 x l0(exp 6) based on mean aerodynamic chord and a Mach number of 0. 15. The port, vertical tail fin was instrumented with ninety-six surface-pressure transducers, arranged in six by eight arrays, on each side of the fin. ne aircraft was also equipped with a removable Leading-Edge Extension (LEX) fence whose purpose is to reduce tail-buffet loads. Current analysis methods for the unsteady aerodynamic pressures and loads are described. Only results for the zero side-slip condition are to be presented, both with and without the LEX fence. Results of the time-averaged, power-spectral analysis are presented for the tail fin bending moments which are derived from the integrated pressure field. Local wave velocities on the tail surfaces are calculated from pressure correlations. It was found that the LEX fence significantly reduces the magnitude of the root-mean-square pressures and bending moments. Scaling and repeatability issues are addressed by comparing the present full scale results for pressures at the 60%-span and 45%-chord location with previous full-scale F/A-18 tail-buffet test in the 80- by 120- Foot Wind Tunnel, and with several small-scale tests. The comparisons show that the tail buffet frequency scales very well with tail chord and free-stream velocity, and that there is good agreement with the previous full-scale test. Root-mean-square pressures and power spectra do not scale as well as the frequency results. Addition of a LEX fence caused tail-buffet loads to be reduced at all model scales.
The age distribution of 261 field localities, sampled for their well-preserved Archean and Proterozoic sedimentary rocks, revealed a 500-700 Ma episodicity. Assuming that the numbers of sites are a proxy for mass of sediments, the record of well-preserved sediments is more abundant in the intervals 3.5-3.3, 2.8-2.5, 2.1-1.8, 1.5-1.3, and 1.0-0.54 Ga than in the intervening intervals. It is proposed that the crustal inventory of photosynthetic organic carbon was modulated by the volume of sedimentation in sites favorable for the burial and long-term preservation of organic carbon. Tectonic processes controlled this sediment volume. Episodic increases in the organic inventory led to stepwise increases in oxidized reservoirs (e.g., O2, SO4(2-), Fe(3+). The interval 2.9-2.5 Ga recorded a large rise in seawater Sr-87/Sr-86, the oldest-known extensive banded iron formations, and the first evidence (C-13-depleted kerogens) of O2 use by methylotrophic bacteria. The interval 2.2-1.8 Ga has both carbon isotopic evidence for a stepwise increase in the organic reservoir and also paleosol evidence for an O2 increase. The interval 1.1-0.6 Ga shows isotopic evidence for another organic carbon increase. The interval 1.5-1.3 Ga revealed no such increases as yet, perhaps because incomplete rifting of the mid-Proterozoic supercontinent was associated with extensive sedimentation in oxidized continental basins, producing redbeds, coarse clastics, etc. Such sedimentation did not promote the burial of reduced carbon.
Enhanced finite elements are elements with an embedded analytical solution which can capture detailed local fields, enabling more efficient, mesh-independent finite element analysis. In the present study, an enhanced finite element is applied to generate a general framework capable of modeling an array of joint types. The joint field equations are derived using the principle of minimum potential energy, and the resulting solutions for the displacement fields are used to generate shape functions and a stiffness matrix for a single joint finite element. This single finite element thus captures the detailed stress and strain fields within the bonded joint, but it can function within a broader structural finite element model. The costs associated with a fine mesh of the joint can thus be avoided while still obtaining a detailed solution for the joint. Additionally, the capability to model non-linear adhesive constitutive behavior has been included within the method, and progressive failure of the adhesive can be modeled by using a strain-based failure criteria and re-sizing the joint as the adhesive fails. Results of the model compare favorably with experimental and finite element results.
Supergranulation is a component of solar convection that assists in the outward transportation of internal energy. Supergranule cells are approximately 35 Mm across, have lifetimes on the order of a day and have divergent horizontal velocities of around 300 m/s, a factor of 10 higher than their central radial components. While they have been observed using Doppler methods for around half a century, their existence is also observed in other datasets such as magnetograms and Ca II K images. These datasets clearly show the influence of supergranulation on solar magnetism and how the local field is organized by the flows of supergranule cells. The Heliospheric and Magnetic Imager (HMI) aboard SDO is making fresh observations of convection phenomena at a higher cadence and a higher resolution that should make granular features visible. Granulation and supergranulation characteristics can now be compared within the same datasets, which may lead to further understanding of any mutual influences. The temporal and spatial enhancements of HMI will also reduce the noise level within studies of convection so that more detailed studies of their characteristics may be made. We present analyses of SDO/HMI Dopplergrams that provide new estimates of convection cell sizes, lifetimes, and velocity flows, as well as the rotation rates of the convection patterns across the solar disk. We make comparisons with previous data produced by MDI, as well as from data simulations.