Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC REYNOLDS NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Studies on the dynamics of Venus ionosphere - Effects of varying the ionopause height and the onset of turbulence

The conservation equations of plasma dynamics in the upper ionosphere of Venus have been solved by using a spectral method in the horizontal and finite differencing in the vertical direction. The effect of varying the ionopause height on the computed nightside ion densities is investigated. These ion densities show a sharp decrease as the ionopause altitude is reduced to 300 km. The effect of viscous forces on the horizontal plasma flow is investigated for a wide range of values of the coefficient of viscosity. The Reynolds numbers characteristics of the flow are calculated and the conditions for the onset of turbulence discussed. It is found that the Reynolds number can be large (greater than 1000) in the subsolar region for a coefficient of viscosity of up to 1.6 x 10 to the -10th g/cm s. The influence of magnetic fields on viscosity is also discussed.

Singhal, R. P.↗

Effects of Traveling Magnetic Field on Dynamics of Solidification

The Lorentz body force induced in electrically conducting fluids can be utilized for a number of materials processing technologies. An application of strong static magnetic fields can be beneficial for damping convection present during solidification. On the other hand, alternating magnetic fields can be used to reduce as well as to enhance convection. However, only special types of time dependent magnetic fields can induce a non-zero time averaged Lorentz force needed for convection control. One example is the rotating magnetic field. This field configuration induces a swirling flow in circular containers. Another example of a magnetic field configuration is the traveling magnetic field (TMF). It utilizes axisymmetric magnetostatic waves. This type of field induces an axial recirculating flow that can be advantageous for controlling axial mass transport, such as during solidification in long cylindrical tubes. Incidentally, this is the common geometry for crystal growth research. The Lorentz force induced by TMF can potentially counter-balance the buoyancy force, diminishing natural convection, or even setting up the flow in reverse direction. Crystal growth process in presence of TMF can be then significantly modified. Such properties as the growth rate, interface shape and macro segregation can be affected and optimized. Melt homogenization is the other potential application of TMF. It is a necessary step prior to solidification. TMF can be attractive for this purpose, as it induces a basic flow along the axis of the ampoule. TMF can be a practical alloy mixing method especially suited for solidification research in space. In the theoretical part of this work, calculations of the induced Lorentz force in the whole frequency range have been completed. The basic flow characteristics for the finite cylinder geometry are completed and first results on stability analysis for higher Reynolds numbers are obtained. A theoretical model for TMF mixing is also developed. In the experimental part, measurements of flow induced by TMF in a column of mercury (Hg) are presented. Also, an alloy mixing of Bi-Sn of the eutectic composition is demonstrated. A traveling magnetic field of 4mT at 3kHz applied for 120 minutes is found to be sufficient to homogenize an alloy enclosed in a 1cm diameter and 12 cm long tube.

Source record↗

Experimental feasibility study of the application of magnetic suspension techniques to large-scale aerodynamic test facilities

Based on the premises that magnetic suspension techniques can play a useful role in large scale aerodynamic testing, and that superconductor technology offers the only practical hope for building large scale magnetic suspensions, an all-superconductor 3-component magnetic suspension and balance facility was built as a prototype and tested sucessfully. Quantitative extrapolations of design and performance characteristics of this prototype system to larger systems compatible with existing and planned high Reynolds number facilities at Langley Research Center were made and show that this experimental technique should be particularly attractive when used in conjunction with large cryogenic wind tunnels.

Zapata, R. N.↗

Experimental feasibility study of the application of magnetic suspension techniques to large-scale aerodynamic test facilities

Based on the premises that (1) magnetic suspension techniques can play a useful role in large-scale aerodynamic testing and (2) superconductor technology offers the only practical hope for building large-scale magnetic suspensions, an all-superconductor three-component magnetic suspension and balance facility was built as a prototype and was tested successfully. Quantitative extrapolations of design and performance characteristics of this prototype system to larger systems compatible with existing and planned high Reynolds number facilities have been made and show that this experimental technique should be particularly attractive when used in conjunction with large cryogenic wind tunnels.

Zapata, R. N.↗

The dynamics of fibril magnetic fields. I - Effect of flux tubes on convection. II - The mean field equations

Observations have established the general fibril state of the magnetic field at the visible surface of the sun. This extraordinary state of the field, in separate intense flux tubes, implies that the convection has a relatively permanent, closed topology, in spite of the large Reynolds number. This paper explores some of the effects of the separate flux tubes on the convective motions, generally pushing the convective cells toward aligning their downdrafts with the flux tubes so as to minimize the dissipation.

Parker, E. N.↗

Magnetic suspension - Today's marvel, tomorrow's tool

NASA's Langley facility has through constant advocacy of magnetic suspension systems (MSSs) for wind-tunnel model positioning obtained a technology-development status for the requisite large magnets, computers, automatic control techniques, and apparatus configurations, to contemplate the construction of MSSs for large wind tunnels. Attention is presently given to the prospects for MSSs in wind tunnels employing superfluid helium atmospheres to obtain very high Reynolds numbers, where the MSS can yield substantial enhancements of wind tunnel productivity.

Lawing, Pierce L.↗

Advanced experimental techniques for transonic wind tunnels - Final lecture

A philosophy of experimental techniques is presented, suggesting that in order to be successful, one should like what one does, have the right tools, stick to the job, avoid diversions, work hard, interact with people, be informed, keep it simple, be self sufficient, and strive for perfection. Sources of information, such as bibliographies, newsletters, technical reports, and technical contacts and meetings are recommended. It is pointed out that adaptive-wall test sections eliminate or reduce wall interference effects, and magnetic suspension and balance systems eliminate support-interference effects, while the problem of flow quality remains with all wind tunnels. It is predicted that in the future it will be possible to obtain wind tunnel results at the proper Reynolds number, and the effects of flow unsteadiness, wall interference, and support interference will be eliminated or greatly reduced.

Kilgore, Robert A.↗

MHD Instability and Turbulence in the Tachocline

In this quarter we have begun simulations on the Cray T3E at PSC and we are debugging our code on the TSC. The PSC simulations are examining stratified shear turbulence with a flow-aligned magnetic field and passive tracer particles. We have conducted analysis of neutral simulations to establish a firm basis of comparison. Second-order structure functions have been computed, fit, and compared to theoretical expressions relating the dissipation fields and the structure-function-fit parameters. Agreement with high-Reynolds number observations is excellent, giving us confidence that the lower-Re simulations are relevant to higher-Re flows. We have also evaluated the neutral layer anisotropy.

Werne, Joseph↗

Ring current particle distributions during the magnetic storms of 16-18 December 1971

In an effort to summarize the constrasting development of the stormtime ring currents during the December 16-18, 1971 magnetic storms, maps were drawn indicating the proton energy density spatial/temporal distributions. The maps contain distributions for the 5 to 138 keV protons for each of seven orbits. The first storm was not characteristic of a single substorm nor a fully developed magnetic storm, but it was comprised of a sudden commencement, a positive phase, and multiple substorms producing a small depression in the magnetic field. The second storm was classical in development with a short two hour growth phase. Energy density distribution constrasts for the two storms show the second storm displayed three dominant features over the first storm. They were: (1) the intensities were 2 1/2 times larger, (2) the depths of penetration were 1/2 to 1 Reynolds number lower, and (3) the distribution became symmetric.

Smith, P. H.↗

Design features and operational characteristics of the Langley 0.3-meter transonic cryogenic tunnel

Experience with the Langley 0.3 meter transonic cryogenic tunnel, which is fan driven, indicated that such a tunnel presents no unusual design difficulties and is simple to operate. Purging, cooldown, and warmup times were acceptable and were predicted with good accuracy. Cooling with liquid nitrogen was practical over a wide range of operating conditions at power levels required for transonic testing, and good temperature distributions were obtained by using a simple liquid nitrogen injection system. To take full advantage of the unique Reynolds number capabilities of the 0.3 meter transonic tunnel, it was designed to accommodate test sections other than the original, octagonal, three dimensional test section. A 20- by 60-cm two dimensional test section was recently installed and is being calibrated. A two dimensional test section with self-streamlining walls and a test section incorporating a magnetic suspension and balance system are being considered.

Kilgore, R. A.↗

Optimum transonic wind tunnel

The optimum facility to complement existing high Reynolds number transonic wind tunnels is discussed. It is proposed that the facility be cryogenic, have a total pressure of five atmospheres or less, and have a test section on the order of 4- to 5-meters square. The large size is to accommodate complicated models such as those used in propulsion testing. It is suggested that magnetic suspension and wall interference minimization and correction procedures be used. Simplicity of initial design is stressed as a means of providing for future growth opportunities.

Barnwell, R. W.↗

Interference-free measurements of the subsonic aerodynamics of slanted-base ogive cylinders

Drag, lift, pitching moment, and base-pressure measurements have been made, free of support interference, on a range of slanted-base ogive cylinders, using the NASA Langley Research Center 13-in magnetic suspension and balance system. Test Mach numbers were in the range 0.04-0.2. Two types of wake flow were observed, a quasi-symmetric turbulent closure or a longitudinal vortex flow. Aerodynamic characteristics differ dramatically between the two wake types. Drag measurements are shown to be in agreement with previous tests. A hysteretic behavior of the wake with varying Reynold's number has been discovered for the 45-deg base. An interaction between forebody boundary-layer state and wake flow and base pressures has been detected for higher slant angles.

Britcher, Colin P.↗

Applications of spectral methods to turbulent magnetofluids in space and fusion research

Recent and potential applications of spectral method computation to incompressible, dissipative magnetohydrodynamics are surveyed. Linear stability problems for one dimensional, quasi-equilibria are approachable through a close analogue of the Orr-Sommerfeld equation. It is likely that for Reynolds-like numbers above certain as-yet-undetermined thresholds, all magnetofluids are turbulent. Four recent effects in MHD turbulence are remarked upon, as they have displayed themselves in spectral method computations: (1) inverse cascades; (2) small-scale intermittent dissipative structures; (3) selective decays of ideal global invariants relative to each other; and (4) anisotropy induced by a mean dc magnetic field. Two more conjectured applications are suggested. All the turbulent processes discussed are sometimes involved in current carrying confined fusion magnetoplasmas and in space plasmas.

Montgomery, D.↗

Experimental Studies of the Interaction Between a Parallel Shear Flow and a Directionally-Solidifying Front

It has long been recognized that flow in the melt can have a profound influence on the dynamics of a solidifying interface and hence the quality of the solid material. In particular, flow affects the heat and mass transfer, and causes spatial and temporal variations in the flow and melt composition. This results in a crystal with nonuniform physical properties. Flow can be generated by buoyancy, expansion or contraction upon phase change, and thermo-soluto capillary effects. In general, these flows can not be avoided and can have an adverse effect on the stability of the crystal structures. This motivates crystal growth experiments in a microgravity environment, where buoyancy-driven convection is significantly suppressed. However, transient accelerations (g-jitter) caused by the acceleration of the spacecraft can affect the melt, while convection generated from the effects other than buoyancy remain important. Rather than bemoan the presence of convection as a source of interfacial instability, Hurle in the 1960s suggested that flow in the melt, either forced or natural convection, might be used to stabilize the interface. Delves considered the imposition of both a parabolic velocity profile and a Blasius boundary layer flow over the interface. He concluded that fast stirring could stabilize the interface to perturbations whose wave vector is in the direction of the fluid velocity. Forth and Wheeler considered the effect of the asymptotic suction boundary layer profile. They showed that the effect of the shear flow was to generate travelling waves parallel to the flow with a speed proportional to the Reynolds number. There have been few quantitative, experimental works reporting on the coupling effect of fluid flow and morphological instabilities. Huang studied plane Couette flow over cells and dendrites. It was found that this flow could greatly enhance the planar stability and even induce the cell-planar transition. A rotating impeller was buried inside the sample cell, driven by an outside rotating magnet, in order to generate the flow. However, it appears that this was not a well-controlled flow and may also have been unsteady. In the present experimental study, we want to study how a forced parallel shear flow in a Hele-Shaw cell interacts with the directionally solidifying crystal interface. The comparison of experimental data show that the parallel shear flow in a Hele-Shaw cell has a strong stabilizing effect on the planar interface by damping the existing initial perturbations. The flow also shows a stabilizing effect on the cellular interface by slightly reducing the exponential growth rate of cells. The left-right symmetry of cells is broken by the flow with cells tilting toward the incoming flow direction. The tilting angle increases with the velocity ratio. The experimental results are explained through the parallel flow effect on lateral solute transport. The phenomenon of cells tilting against the flow is consistent with the numerical result of Dantzig and Chao.

Zhang, Meng↗

Cryogenic wind tunnels

Cryogenic wind tunnels and their use for high Reynolds number testing are reviewed. Emphasis is given to operational and aerodynamic testing experience in the NASA Langley 0.3-m Transonic Cryogenic Tunnel. Areas covered include development of test techniques and aerodynamic testing in cryogenic tunnels. The use of advanced testing techniques to increase the value of cryogenic tunnels is recommended. These include adaptive wall test sections, using solid but flexible top and bottom walls, and magnetic suspension and balance systems.

Kilgore, Robert A.↗

Applications of Magnetic Suspension Technology to Large Scale Facilities: Progress, Problems and Promises

This paper will briefly review previous work in wind tunnel Magnetic Suspension and Balance Systems (MSBS) and will examine the handful of systems around the world currently known to be in operational condition or undergoing recommissioning. Technical developments emerging from research programs at NASA and elsewhere will be reviewed briefly, where there is potential impact on large-scale MSBSS. The likely aerodynamic applications for large MSBSs will be addressed, since these applications should properly drive system designs. A recently proposed application to ultra-high Reynolds number testing will then be addressed in some detail. Finally, some opinions on the technical feasibility and usefulness of a large MSBS will be given.

Britcher, Colin P.↗

Cryogenic wind tunnels for high Reynolds number testing

This paper begins with a brief review of cryogenic wind tunnels and their use for high Reynolds number testing. Emphasis is on operational experience and recent aerodynamic tesing in the NASA Langley 0.3-m Transonic Cryogenic Tunnel (TCT). Specific area covered in this paper include development of test techniques and aerodynamic testing in cryogenic tunnels. Details of research experience in developing model construction techniques, including airfoils as thin as 5 percent, are given. The use of advanced testing techniques to increase the value of cryogenic tunnels to the research community is recommended. These include adaptive wall test sections using solid but flexible top and bottom walls and magnetic suspension and balance systems.

Kilgore, Robert A.↗

Results of aerodynamic heat transfer tests of a 0.0175-scale model of the Rockwell International Space Shuttle Orbiter 139 (model number 22-0) in the NASA/Ames 3.5-foot hypersonic wind tunnel (test OH6)

The results of a hypersonic wind tunnel test program conducted using a 0.0175 scale thin-skin thermocouple model of the Space Shuttle Orbiter to obtain aerodynamic heat transfer data on the Orbiter under simulated reentry conditions were presented. The test program was conducted at a Mach number of 7.3 and a freestream Reynolds number ranging between 1.0 and 6.0 million/foot. The model was tested for angles of attack ranging between 10 deg and 30 deg and a sideslip angle of 0 deg. The model was constructed of 15-5 PH stainless steel with the instrumented areas machined to a nominal skin thickness of 0.030 in. The model instrumentation consisted of 288 iron-constantan thermocouples spot welded to the skin inner surface, but only 75 of these were used in this test program. A high-speed, analog-to-digital data acquisition system was used to record data on magnetic tape.

Dye, W. H.↗