Search NASA⌕ Search

SEARCH · Search NASA

Results for “MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dynamic interactions at the mineral–organic matter interface

Minerals are widely assumed to protect organic matter (OM) from degradation in the environment, promoting the persistence of carbon in soil and sediments. In this Review, we describe the mechanisms and processes operating at the mineral–organic interface as they relate to OM transformation dynamics. A broad set of interactions occur, with minerals adsorbing organic compounds to their surfaces and/or acting as catalysts for organic reactions. Minerals can serve as redox partners for OM through direct electron transfer or by generating reactive oxygen species, which then oxidize OM. Finally, the compartmentalization of soil and sediment by minerals creates unique microsites that host diverse microbial communities. Acknowledgement of this multiplicity of interactions suggests that the general assumption that the mineral matrix provides a protective function for OM is overly simplistic. Future work must recognize adsorption as a condition for further reactions instead of as a final destination for organic adsorbates, and should consider the spatial and functional complexity that is characteristic of the environments where mineral–OM interactions are observed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Raman spectroscopic investigation of selected natural uranyl sulfate minerals

Uranyl sulfates are important constituents of uranium ores and represent a significant fraction of U(VI) minerals discovered in recent years owing to their propensity to form in mine tailings and legacy sites related to uranium exploration. Recently, we surveyed all published Raman spectra for uranium minerals and found significantly less easily accessible data available for uranyl sulfates relative to other groups of uranium minerals (Spano et al. 2023). In that work, we described average spectra for groups of uranyl minerals to understand common vibrational spectroscopic features attributable to similarities in oxyanion chemistry among U(VI) minerals, but only data for three uranyl sulfate minerals were included in the study. The present work reports on Raman spectra collected for 18 additional uranyl sulfate minerals. In conclusion, to better understand underlying structural and chemical features that give rise to spectroscopic observables, we relate differences in structural topology, charge-balancing cations, and locality of origin to features observed in the Raman spectra of selected natural uranyl sulfates.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2026

Distributed Mafic Rock Resources for Carbon Mineralization in Arizona

Ex-situ carbon mineralization is a process by which CO2 is reacted with alkaline silicate minerals and rocks to produce stable carbonate materials, which can be used for other industrial processes. Arizona, U.S.A., hosts abundant surficial mafic rocks in three young volcanic fields, Geronimo-San Bernardino, San Francisco, and Springerville, and other distributed locations throughout the state. We created a Mafic Rock Resource Inventory (MRRI) that categorizes geochemical, physical, and textural characteristics of a diverse suite of surficial mafic rock samples and provide a benchmark reaction dataset parameterizing the temperature, pressure, and pH conditions best suited ex-situ mineralization in different rock types. MRRI data is publicly available online via a map-viewer. We establish two reaction condition sets, varied in temperature, pressure, and pH, where crystal-rich and glassy rocks reach maximum reaction extent and different carbonate phases are formed. Systematic ex-situ mineralization experiments on 21 diverse rock types show trends in geochemical, mineralogical, and reactivity behavior and establish maximum effective capture capacity. From this, scoria cones in three Arizona volcanic fields have a ~62 Gt effective CO₂ storage capacity with one of the fields having a ~42 Gt storage capacity in lava flows. Reactivity results have applications to alkaline mafic rock resources exposed globally, including producing additional effective storage capacity estimates and scaled commercialization of mafic rock ex-situ mineralization, should reaction extents be improved through advances in mineralization techniques. MRRI data were used to create a Direct Air Capture to Mineralization (DACM) systems model, technoeconomic analysis, and life-cycle assessment. These documents are presented as three appendices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Influence of clay mineral weathering on green rust formation at iron-reducing conditions

Green rusts (GR) are important drivers for trace metal and nutrient cycling in suboxic environments. We investigated whether green rusts would incorporate aluminum (Al) or other elements from naturally-formed clay minerals containing easily-weatherable clay minerals (e.g. mica, interlayered clays). We isolated the clay minerals from a Matapeake silt loam soil by removal of silt and sand, organic matter, and reducible oxides to study mechanisms of interaction between Fe(II) and soil-sourced clay minerals. We conducted batch Fe(II) sorption experiments at multiple near-neutral pHs (6.5–7.5) and reaction times (2h–365 days). Mineral transformations were characterized by selective extractions, X-ray diffraction (XRD), and Fe X-ray absorption spectroscopy (XAS) analyzed by shell-fitting and linear combination fitting (LCF) with natural and synthetic standards. Clay mineral fraction contained a mixture of quartz, kaolinite, interlayered vermiculite, mica, and chlorite with significant structural Fe (2.6% wt). Uptake of Fe(II) increased with pH and kinetics were rapid until 5 days, followed by slow continuous Fe(II) uptake. Citrate-bicarbonate desorption kinetics from Fe(II) sorbed clay released more Al and silicon (Si) compared with unreacted soil clay fraction whereas magnesium (Mg) and potassium (K) were unaffected. Citrate-bicarbonate extracted Fe contained more Fe(II) than an ideal GR with an Fe(II)/Fe(III) molar ratio of 5.50. Analysis of the Fe EXAFS by both LCF and shell fitting was best modeled as a combination of Fe(III)-clay reduction to Fe(II) and precipitation of GR and Fe(II)-Al LDH. After 7 days of Fe(II) sorption, LCF identified 55.2% total Fe in clay, 33.4% GR(Cl) and 11.4% Fe(II)-Al LDH. Further, these results provide novel evidence of Fe(II)-Al LDHs precipitating on naturally-formed soil clay minerals as a minor phase to GR. The geochemical implications are that GRs formed in soils and sediments should be considered to have Al and Si as well as Mg substitutions affecting their structure and reactivity.

58 GEOSCIENCES↗
DOE OSTI2024

Carbon Mineralization in Fractured Mafic and Ultramafic Rocks: A Review

Mineral carbon storage in mafic and ultramafic rock masses has the potential to be an effective and permanent mechanism to reduce anthropogenic CO 2 . Several successful pilot-scale projects have been carried out in basaltic rock (e.g., CarbFix, Wallula), demonstrating the potential for rapid CO 2 sequestration. However, these tests have been limited to the injection of small quantities of CO 2 . Thus, the longevity and feasibility of long-term, large-scale mineralization operations to store the levels of CO 2 needed to address the present climate crisis is unknown. Moreover, CO 2 mineralization in ultramafic rocks, which tend to be more reactive but less permeable, has not yet been quantified. In these systems, fractures are expected to play a crucial role in the flow and reaction of CO 2 within the rock mass and will influence the CO 2 storage potential of the system. Therefore, consideration of fractures is imperative to the prediction of CO 2 mineralization at a specific storage site. In this review, we highlight key takeaways, successes, and shortcomings of CO 2 mineralization pilot tests that have been completed and are currently underway. Laboratory experiments, directed toward understanding the complex geochemical and geomechanical reactions that occur during CO 2 mineralization in fractures, are also discussed. Experimental studies and their applicability to field sites are limited in time and scale. Many modeling techniques can be applied to bridge these limitations. We highlight current modeling advances and their potential applications for predicting CO 2 mineralization in mafic and ultramafic rocks.

25 ENERGY STORAGE↗
DOE OSTI2023

Mineral reactivity determines root effects on soil organic carbon

Modern conceptual models of soil organic carbon (SOC) cycling focus heavily on the microbe-mineral interactions that regulate C stabilization. However, the formation of ‘stable’ (i.e. slowly cycling) soil organic matter, which consists mainly of microbial residues associated with mineral surfaces, is inextricably linked to C loss through microbial respiration. Therefore, what is the net impact of microbial metabolism on the total quantity of C held in the soil? To address this question, we constructed artificial root-soil systems to identify controls on C cycling across the plant-microbe-mineral continuum, simultaneously quantifying the formation of mineral-associated C and SOC losses to respiration. Here we show that root exudates and minerals interacted to regulate these processes: while roots stimulated respiratory C losses and depleted mineral-associated C pools in low-activity clays, root exudates triggered formation of stable C in high-activity clays. Moreover, we observed a positive correlation between the formation of mineral-associated C and respiration. This suggests that the growth of slow-cycling C pools comes at the expense of C loss from the system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Mass, enthalpy, and chemical‐derived emission flows in mineral processing

Abstract The production of materials from mineral resources is a significant contributor to anthropogenic CO 2 emissions. This contribution is driven primarily by chemical CO 2 emissions from the conversion of mineral resources and emissions tied to energy demands for material processing. In this work, we synthesize the thermodynamically required enthalpy and chemically derived emissions of mineral processing and consumption in the United States. We quantify mass, enthalpy, and emissions flows for minerals described by the US Geological Survey, with 882 mass flows and 155 chemical reactions analyzed. In total, 503 PJ of enthalpy is thermodynamically required for 398 Mt of chemically converted material consumption in the United States, resulting in 129 Mt of chemically derived CO 2 emissions. Additionally, 249 PJ of fuel resources such as coke are stoichiometrically required for the chemical conversion of minerals. These enthalpy requirements and CO 2 emissions are primarily from high‐mass consumption materials such as cement, carbon steel, fertilizer, and aluminum. Cumulatively, the dataset synthesized in this work provides a complete view of the chemical requirements of mineral processing and can aid in guiding decarbonization or sustainable growth in critical minerals sectors, including construction materials and materials for energy storage or generation.

Kane, Seth↗
DOE OSTI2023

Reactive Transport Modeling of Anthropogenic Carbon Mineralization in Stacked Columbia River Basalt Reservoirs

Numerical simulation of CO2 storage in basalts and related reactive lithologies requires modeling complex, coupled hydrologic and chemical processes, including multi-phase flow and transport, partitioning of CO2 into the aqueous phase, and chemical interactions with aqueous fluids and rock minerals. We conducted reactive transport simulations of the Wallula pilot-scale CO2 injection into the flow tops of the Grande Ronde Basalt using our PNNL STOMP-CO2 simulator with the ECKEChem reactive module. Our mineralization simulation of the ~1,000 tons of injected CO2 into the interflow zones was based on the hydrologic transport model we previously developed. For this work, the simulations considered geochemical reactions involving the basalt components, precipitates, formation brine, and injected CO2. In our benchmark case, carbonate minerals precipitated, resulting in ~20% of the CO2 being mineralized in 10 years. Increasing the reaction rate of a single primary mineral phase (clinopyroxene) by an order of magnitude resulted in a carbon mineralization reaction extent of ~90% over the same time interval. Based on these initial sensitivity analysis results, it is clear that a thorough understanding of primary mineral dissolution rates is required for accurately predicting long-term fate and transport of injected CO2 into basalt formations. Our reactive transport numerical simulations will be key components of commercial-scale CO2 storage operation permitting, de-risking, and optimization in mafic and ultramafic reservoirs.

Cao, Ruoshi↗
DOE OSTI2022

Positive correlations between soil C stabilization and loss are regulated by roots, minerals, and microbes

Modern conceptual models of soil organic carbon (SOC) cycling place a strong focus on the microbe-mineral interactions that regulate C stabilization. However, the formation of ‘stable’ soil organic matter, which consists mainly of microbial residues bonded to mineral surfaces, is inextricably linked to C loss through microbial respiration. Therefore, what is the net impact of microbial metabolism on the total quantity of C held in the soil? To address this question, we constructed artificial root-soil systems to identify controls on C cycling across the plant-microbe-mineral continuum, simultaneously quantifying the formation of persistent mineral-associated C and C losses to respiration. Roots and minerals interacted to regulate these processes: while roots stimulated respiratory C losses and depleted mineral-associated C pools in low-activity clays, roots triggered formation of stable C in high-activity clays. Moreover, we observed a strong positive correlation between the formation of mineral-associated C and respiration. This suggests that the growth of persistent C pools which can resist subsequent disturbance comes at the expense of C loss from the system.

58 GEOSCIENCES↗
DOE OSTI2023

Synthetic Calcium Carbonate Production by Carbon Dioxide (CO 2 ) Mineralization of Industrial Waste Brines

The global scale of CO 2 emission has crossed 36 B tons, and the United State represents 14% of the total emissions. In light of the high cost associated with current CO 2 capture processes ($60-to-150 per ton of CO 2 ), carbon capture and utilization (CCU), wherein CO 2 is converted to beneficial products, provides a pragmatic path to overcome the economic barrier for CO 2 emissions control. In particular, CO 2 mineralization offers an attractive route as it produces high-value mineral carbonates that sequester CO 2 in a stable form. For instance, fine precipitated calcium carbonate, a valuable product with unit price in the range of $230-280/t and a global market projected to reach 99 M tons in 2020, can be produced by capturing CO 2 within aqueous Ca 2+ solution. However, two critical challenges need to be overcome—(i) the need for costly processes such as electrolysis or addition of alkali hydroxides to maintain alkalinity during mineralization, and (ii) the geographic availability of Ca-rich solutions (or brines) which often renders efficient integration with power plants impractical. To simultaneously address these challenges, this project developed two novel routes to enable carbonate production based on efficient CO 2 mineralization. In one variation, the project developed a new alkaline carbonation process to capture CO 2 and produce calcite precipitates from coal ashes. Herein, coal ash is carbonated first in a sodium carbonate solution. The carbonation reaction produces sodium hydroxide and raises the solution pH. This high-pH hydroxide solution is then used for CO 2 capture, which converts the sodium hydroxide solution back to sodium carbonate to repeat the carbonation cycle. The carbonated ash residue is refined with a CO 2 pressure swing step to produce high-purity precipitated calcium carbonate. In another variation, Ca-rich produced water brine serves as the Ca-source to mineralize CO 2 . An H + /Na + ion-exchange cycle was designed to provision alkalinity during mineralization and regenerate the ion-exchange reagent in brines with high salinity. Ca-depleted brines can then be treated within a centralized water treatment facility. Both variations beneficially utilize reject streams—such as coal ashes and brines from oil and gas extraction or CO 2 storage operations—that are available at substantial quantities in the vicinity of coal power plants within the U.S. In addition to technology development, this project included techno-economic and life-cycle analysis to identify technically and economically appropriate solutions for power plants in different geographic locations. Taken together, the project provides a unique route to integrate CO 2 emissions control and waste handling/treatment for coal power plants, while producing a high-value product to offset the economic burden associated with waste management. The developed processes utilize post-desulfurization flue gas from coal-fired power plants as is. The CO 2 conversion reactions are performed in alkaline brines at ambient pressure from the flue gas, thereby minimizing the energy burden. By beneficiation of industrial waste streams with low energy input, the processes offers significant technical advantages in energy and CO 2 footprint over the current paradigm of precipitated calcium carbonate production, which involves calcination of limestone at processing temperatures in excess of 800 °C. Overall, this project developed viable CO 2 mineralization processes while strategically maximizing the economic benefit.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Mineral Alteration of Shales by CO 2 and Brine Containing Surfactants

The overall goal of the proposed research was to determine the effect of surfactants on shale mineral reactivity with CO 2 and brine. The specific objectives of the proposed work were to 1) Determine the effect of shale mineralogy and surfactant properties on surfactant adsorption and wettability alteration, 2) Determine the effects of surfactant adsorption and wettability alteration on mineral reactivity with CO 2 and brine for varying hydrodynamic conditions, and 3) Develop a modified mineral reaction model with CO 2 and brine that considers the effects of surfactant adsorption. Four tasks were performed to address the project objectives. These were 1) Select and characterize shale samples, 2) Evaluate the effects of surfactant and reservoir properties on adsorption and mineral reactivity, 3) Determine the effects of surfactant adsorption, wettability alteration, and hydrodynamics on mineral reaction kinetics, and 4) Quantify how surfactant sorption and mineral wettability alteration affect mineral reaction modeling. This final report summarizes results in each of these tasks, as well as associated publications.

58 GEOSCIENCES↗
DOE OSTI2022

Enhancing CO 2 Mineralization Rate and Extent of Iron and Steel Slag via Grinding

Roughly 10% of the CO 2 emissions from iron and steel making are attributable to the direct release of CO 2 from the thermal decomposition of carbonates to produce flux, mainly CaO, used for impurity removal. Notably, these direct emissions remain even if carbon-based steelmaking is replaced by hydrogen-based steelmaking. After removing impurities from the molten metal, this flux becomes the solid waste product called ‘slag’, a primarily Ca-silicate material. The transformation of slag back into carbonates is thermodynamically spontaneous with negative ΔG in the ambient environment, meaning that ~10% of the CO 2 emissions from iron and steel making could be negated if equipment and methods were developed to support CO 2 mineralization. However, the rate of CO 2 mineralization using slag is slowed by several environmental, geometric, and processing factors. We leverage an experimentally verified model of CO 2 mineralization to determine how to efficiently accelerate the process. Increasing the crystallinity of slag, increasing the relative humidity, and reducing the grain size of slag particles provide the greatest increase in CO 2 mineralization rate at the lowest energy penalty. Increasing the concentration of CO 2 and the temperature provide only modest increases in the CO 2 mineralization rate while incurring a substantial energy penalty. For steelmaking slags, CO 2 mineralization represents low-hanging fruit as the current reuse pathways are low value. For ironmaking slag, replacing the production of amorphous slag for the cement industry with the production of crystalline slag for CO 2 mineralization becomes financially preferable when a carbon price/tax exceeds 67.40 USD/t-CO 2 .

42 ENGINEERING↗
DOE OSTI2024

Godzilla mineral dust and La Soufrière volcanic ash fallout immediately stimulate marine microbial phosphate uptake

During the “Godzilla” dust storm of June 2020, unusually high fluxes of mineral dust traveled across the Atlantic from the Sahara Desert, reaching the Caribbean Basin, Gulf Coast, and southeastern United States. Additionally, an eruption of the La Soufrière volcano on St. Vincent in April 2021 generated substantial ashfall in the southeastern Caribbean. While many studies have analyzed mineral dust’s ability to relieve nutrient limitation of phosphorus (P) in the P-stressed North Atlantic, less is known about the impact of extreme events and other natural aerosols on fluxes of P into seawater and from seawater into marine microbial cells. We quantified P and iron (Fe) content in mineral dust from the Godzilla dust storm and volcanic ash from the La Soufrière eruption collected at Ragged Point, Barbados. We also performed seawater incubations to assess the marine microbial response to aerosol deposition. Using environmentally-relevant concentrations of atmospheric particles for within the ocean’s mixed layer allowed us to draw realistic conclusions about how these deposition events impacted P cycling in situ. Volcanic ash has lower P content than mineral dust, and P in volcanic ash is far less soluble (~1%) than assumed in current atmospheric deposition models. Adding mineral dust and the volcanic ash leachate in concentrations representing different deposition scenarios increased soluble reactive phosphorus (SRP) concentrations in coastal seawater by ~7-32 nM. Phosphate uptake rate was stimulated in coastal seawater after either mineral dust or volcanic ash deposition at aerosol concentrations relevant to the Godzilla dust event, with ash eliciting the fastest uptake rate. Furthermore, high concentrations of both the mineral dust and volcanic ash led to slightly elevated alkaline phosphatase activity (APA) compared to the relevant controls, indicating higher potential for use of dissolved organic phosphorus (DOP) as a P source. Quantifying these aerosols’ impacts on P cycling is a significant step towards achieving a better understanding of their potential roles in relieving nutrient limitation and fueling the biological carbon pump.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Critical mineral source potential from oil & gas produced waters in the United States

The volume of produced water, a by-product of oil & gas operations and other energy processes, has been growing across the United States (U.S.) along with the need to manage or recycle this wastewater. Produced water contains many naturally occurring elements of varying concentrations, including critical minerals which are essential to the clean energy transition. However, the current understanding of critical mineral concentrations in produced water and the associated volumes across the U.S. is limited. This study has assessed available databases and literature to gain insight into the presence and concentration of five high priority critical minerals, namely cobalt, lithium, magnesium, manganese, and nickel. The U.S. Geological Survey's National Produced Waters Geochemical Database was the main data source used for determining average critical mineral concentrations in produced water from the major oil and gas reservoirs in the U.S. The volumes of produced water for these major reservoirs were coupled with these concentrations to provide insights into where critical minerals are likely to have high abundance and therefore more recovery options. The analysis indicated the highest recovery potential for lithium and magnesium from produced water in the Permian basin and the Marcellus shale region. However, these assessments should be considered conservative due to the limited availability of reliable concentration data. Finally, it is expected more critical mineral recovery options could emerge with comprehensive characterization data from more recent and representative sources of produced water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Roles of mineral matter in biomass processing to biofuels

Abstract Minerals in biomass have a significant impact on both biofuel quality and yield. This is especially true for current thermochemical biomass conversion processes. However, the roles of plant minerals in biochemical conversion have not been studied extensively, even though they are generally considered to lower the sugar yield because they reduce the feedstock proportion of carbohydrates. A successful strategic solution is thus necessary to overcome the challenges caused by the minerals in biomass, which include (1) decreased quality of biomass feedstocks; (2) reduction of process efficiency; and (3) reduction of the product quality and quantity from biomass conversion. This review summarizes the roles of plant minerals in a biorefinery, focusing on these key challenges. The discussion covers many issues related to plant minerals in biofuel production, including their sources, functions, and distribution in plant biomass, methods of characterizing them, their influence in a biorefinery, and the strategic handling required to manage their occurrence in biomass, based on reported studies. It could inspire better strategies to deal with the variance of mineral content in biomass feedstocks to increase process efficiency and reduce costs while supporting the concept of a circular bioeconomy. © 2023 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2020

Phyllosilicate mineral dissolution upon alkaline treatment under aerobic and anaerobic conditions

The dissolution of phyllosilicate minerals exposed to high-pH environments has been studied to determine the influence of alkaline treatments and variable redox conditions on clay dissolution and the potential formation of new phases via incongruent dissolution phenomena. The present study focused on the dissolution of phyllosilicate minerals (illite, muscovite, and montmorillonite) under anaerobic and aerobic conditions using comparative solutions (sodium hydroxide and ammonium hydroxide) at similar ionic strength in the presence and absence of oxygen. Our batch data show that there is a rapid decrease in aluminum dissolution (< 240 hrs) and slow increase in silica over time (up to 1440 hrs). This trend was particularly evident for montmorillonite which shows the greatest dissolution for ammonium hydroxide, likely due to intercalation of the polyatomic cation ammonium into the mineral’s expandable layers. When comparing alkaline treatments, the strong base, sodium hydroxide, dissolved more of the mica minerals, illite and muscovite, likely due to ion-pairing between the silicate tetrahedra [SiO4]n- and Na+ cations in solution. In addition, redox conditions affect the systems similarly with treatment, although the sodium hydroxide treatment results in greater variability in solution redox conditions. For all investigated phyllosilicates, the calculated aqueous aluminum and silicon ratios over time are significantly different from the minerals’ stoichiometric ratios. As a result, we conclude that incongruent dissolution occurred and suggest formation of secondary precipitates. Understanding the potential for clay mineral alterations from interaction with alkaline solutions has implications for in situ remediation, mining operations, and waste interactions with the subsurface. This research shows that incongruent dissolution is likely and will lead to secondary precipitation which may have long term physical and chemical impacts in the subsurface.

mineral dissolution, phyllosilicate, alkaline, amm↗
DOE OSTI2021

Spatial heterogeneity analyses of pore structure and mineral composition of Barnett Shale using X-ray scattering techniques

The spatial heterogeneity of pore structure and mineral composition at mu m to mm scales in mm to cm-sized shale samples complicates the laboratory measurements of porosity & pore size distribution and consequently reservoir quality evaluation. Traditional fluid invasion characterization methods typically take hours to days to get data and can only test relatively small samples (usually 2.54 cm diameter core plugs and mm-sized rock chips). Furthermore, the Xray scattering techniques at the Advanced Photon Source of the Argonne National Laboratory have the capability to non-destructively determine the pore structure and mineral composition of mm x mm area in a short time of seconds and to hold several to hundreds of mm 2 sized sample to conduct large area heterogeneity analysis in the short duration of hours. With the use of ultra-small angle X-ray scattering (USAXS), small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering (WAXS), the porosity, surface area and pore size distribution of two Barnett Shale samples have been mapped out and the mineral compositions are determined qualitatively. Overall, the porosity and pore surface area of the Barnett Shale Sample A over a 36 cm2 area ranges from 1.70 % to 8.13 % and 8.87 m 2 /g to 40.2 m 2 /g respectively. The porosity and surface area of Sample B over a 24 cm 2 area varies from 3.15 % to 11.7 % and 18.3 m 2 /g to 60.2 m 2 /g. In Sample A, the mineral composition shows a shift from carbonate-rich to siliciclastic-rich over a distance of several millimeters. For Sample B, the mineral compositions are mainly siliciclastic and do not show an obvious lithological change. The direct observations of high spatial heterogeneity of pore structure and mineral composition in shale illustrate the utility of integrated X-ray scattering techniques to provide valuable insights into shale studies and reservoir evaluation.

58 GEOSCIENCES↗
DOE OSTI2022

Regenerable solvents mediate accelerated low temperature CO 2 capture and carbon mineralization of ash and nano-scale calcium carbonate formation

The dual need to remove CO 2 from our emissions and treat alkaline industrial residues such as ash materials motivate the design of innovative pathways to simultaneously capture and convert CO 2 into mineralized carbonates. Direct carbon mineralization is one approach that addresses the need to simultaneously treat alkaline industrial residues and mineralize CO 2 emissions. Low CO 2 solubility in water and slow kinetics at ambient temperature have challenged the direct carbon mineralization of alkaline industrial residues. Here, to address these challenges, the use of CO 2 capture solvents that enhance CO 2 solubility and facilitate accelerated carbon mineralization of fly ash at temperatures below 90 °C is investigated. Calcium carbonate formation results in the inherent regeneration of the solvent. The carbon mineralization extents of non-calcium carbonate content in fly ash were 50% and 51% and in waste ash were 58% and 62% in 2.5 M sodium glycinate and 30 wt% MEA solutions, respectively. The experiments were performed at 50 °C for 3 hours with CO 2 partial pressure of 1 atm in a continuously stirred slurry environment with 15 wt.% solid. Furthermore, nanoscale CaCO 3 is successfully synthesized from dissolved calcium using CO 2 -loaded sodium glycinate and surfactants such as CTAB (Cetyl Trimethyl Ammonium Bromide). Surfactants such as CTAB bind to the calcium carbonate surface and regulate the growth of calcium carbonate particles. These innovative approaches demonstrate the feasibility of directly storing CO 2 in fly ash and waste ash as calcium carbonate and producing nanoscale calcium carbonate using regenerable CO 2 capture solvents.

42 ENGINEERING↗