SEARCH · Search NASA

Results for “MOLECULAR DYNAMICS METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Spin-orbit coupling induced demagnetization in Ni: Ab initio nonadiabatic molecular dynamics perspective

Spin-orbit coupling (SOC), which can induce spin flip during the relaxation of photoexcited charge carrier, plays a crucial role in spin dynamics. Here in this work, we have used time-domain ab initio nonadiabatic molecular dynamics (NAMD) method to study the SOC induced ultrafast demagnetization in Ni at 300K. The spin-diabatic representation using spin-polarized Kohn-Sham (KS) basis sets and spin-adiabatic representation using spinor basis sets have been applied, and both of them achieve demagnetization in Ni with a timescale around 100fs. The spin-diabatic representation suggests a picture that the electron-phonon coupling (EPC) provides direct energy relaxation channel among the same-spin states, while the SOC can induce spin flip. After photoexcitation, it is found the spin-minority electrons relax to the same-spin states rather than the opposite-spin states, since EPC is larger than SOC by one order of magnitude. By contrast, for the spin-majority electrons, spin flip occurs since there are no empty same-spin states as electron acceptor above the Fermi level. The different relaxation pathways for spin-majority and spin-minority electrons induce the demagnetization. The spin-adiabatic representation provides an Elliott-Yafet spin-phonon scattering picture. The SOC induced reduction of magnetic moment in Ni may induce magnon to drive further demagnetization. The ab initio NAMD simulation provides a critical angle to understand how the SOC and EPC affect demagnetization process in Ni.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Nonadiabatic Molecular Dynamics Study of the Relaxation Pathways of Photoexcited Cyclooctatetraene

In the current study, we present nonadiabatic (NAMD) and adiabatic molecular dynamics simulations of the transition-state dynamics of photoexcited cyclooctatetraene (COT). The equilibrium-state structure and absorption spectra are analyzed using the semiempirical Austin Model 1 potential. The NAMD simulations are obtained by a surface-hopping algorithm. We analyzed in detail an active excited to ground state relaxation pathway accompanied by an S 2 /S 3 (D 2d ) → S 1 (D 8h ) → S o (D 4h ) → S o (D 2d ) double-bond shifting mechanism. The simulated excitation lifetime is in good agreement with experiment. The first excited singlet state S1 plays a crucial role in the photochemistry. Here, the obtained critical molecular conformations, energy barrier, and transition-state lifetime results will provide a basis for further investigations of the bond-order inversion and photoswitching process of COT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Assessment of mechanical, thermal properties and crystal shapes of monoclinic tricalcium silicate from atomistic simulations

The two most common polymorphs in industrial alite, M1 and M3, were characterized at the molecular scale. Different methods were employed and discussed to assess mechanical properties and specific heat of both polymorphs. The calculated homogenized elastic moduli and specific heat were found in good agreement with experimental measurements. A comparative analysis of spacial Youngs modulus reveal isotropic and anisotropic spacial distribution for M{sub 1} and M{sub 3} respectively. A more isotropic compressive strength is also reported for M{sub 1} when compared to M{sub 3} polymorph. Cleavage energies computation allowed to proposed equilibrium shapes for both polymorph, with significant differences. While the lowest cleavage energies were found along (100) and (001) for both polymorphs, the constructed M1 crystal possesses 3 independent facets, against seven for the M3 polymorph.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Effect of Ligand Polarity on the Internal Dipoles and Ferroelectric Distortion in BaTiO 3 Nanocubes

Here, surface adsorbates and surrounding matrix species have been demonstrated to affect the properties of nanoscale ferroelectrics and nanoscale ferroelectric composites; potentially counteracting performance losses that can occur in small particle sizes. In this work, the effects of nonpolar oleic acid (OA) and polar tetrafluoroborate (BF 4 - ) ligand capping on the surface of various sizes of BaTiO 3 nanocubes have been investigated with combined neutron diffraction and neutron pair distribution function (PDF), density functional theory (DFT), and ab initio molecular dynamics (AIMD) methods. The low real space PDF region provides an unobstructed view of rhombohedral (split short and long) Ti-O distances in BaTiO 3 nanocubes, mimicking the well-established order-disorder local structure found in bulk BaTiO 3 . Interestingly, the intermediate-range order in nanocubes is found to be orthorhombic, rather than tetragonal. It is concluded that polar ligands adsorbed at BaTiO 3 surfaces stabilize the correlation length scale of local rhombohedral distortions in ferroelectric nanoparticles relative to nonpolar ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Bridging the gap between NMR measured mean silicate chain length and nano-scale silicate polymorphism of calcium silicate hydrates

Variable stoichiometry and silicate polymorphism in calcium-silicate-hydrates (C-S-H) has impeded the revelation of point defects distribution in the silicate tetrahedral network of C-S-H, which resembles tobermorite crystal structure with some bridging tetrahedra (BT) and paired tetrahedra (PT) vacancies in dreierketten chains. Here we use a computational approach to characterize silicate polymorphism by introducing the vacancy ratio of BT to PT (α) and establishing a three-term empirical mean chain length (MCL) formula for different calcium-to‑silicon ratios (Ca/Si) ranging from 1.2 to 2.3. The formula identifies BT and PT controls at low and high α respectively and allows an inverse mapping of polymorphic range based on NMR experiments. The proposed computational framework quantitatively describes silicate polymorphs and links NMR-measured MCL to C-S-H atomistic configurations at the molecular level.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗

DOE OSTI2021

New insights into the mechanism governing the elasticity of calcium silicate hydrate gels exposed to high temperature: A molecular dynamics study

When exposed to fire, the integrity of cement-based materials is governed by thermally-induced changes in the mechanical properties of their binding phase, i.e., the calcium–silicate–hydrate (C–S–H) gel. However, the effect of temperature on the structure, density, and mechanical properties of C–S–H remains only partially known. Here, based on reactive molecular dynamics simulations, we reveal the nature of thermally-induced damage in C–S–H gels. In general, we show that, at the atomic scale, exposure to high temperature results in partial dehydration, volumetric shrinkage, disordering, and stiffening in the C–S–H grains. However, we show that the thermal response of C–S–H strongly depends on its chemical composition, wherein C–S–H systems associated with lower Ca/Si molar ratios are able to undergo higher temperatures before amorphization. Based on these results, we demonstrate that the stiffness of C–S–H gels (i.e., including porosity—as probed by nanoindentation) is governed by a competition between the stiffening of the grains and the decrease in packing density—wherein the latter eventually become predominant.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Thermal conductivity of cement paste: Influence of macro-porosity

Thermal conductivity of cement paste is significantly influenced by the presence of macro-pores within it. These pores (pores with size greater than 6 μm, measured using microCT) which may be filled with air and/or water significantly alters the thermal conductivity of the resulting material. A combination of experiments, molecular dynamic investigations of major constituents of the cement paste, multiscale homogenization techniques, and inclusion of thermal conductivity of the pores containing either air or water has been utilized in this study to reveal the influence of pores in the calculation of thermal conductivity of the composite material.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Molecular level study of uni/multi-axial deformation response of tobermorite 11 Å: A force field comparison study

Molecular deformation response of tobermorite 11 Å (a mineral analogue to C-S-H, the primary constituent of hydrated cement paste) under uni/tri-axial loading (both tension and compression) has been investigated in this manuscript using empirical and reactive force fields. A comparison has been chalked out amongst the responses using different force fields. Evolution of atomic environment during the deformation have studied using reactive force field. This study demonstrate the key observations on the application of different force fields to study the large deformation behaviour of the material.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Molecular dynamics and experimental study on the adhesion mechanism of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper aims to study the adhesion mechanism of polyvinyl alcohol (PVA) fiber within alkali-activated slag/fly ash (AASF) matrix using molecular dynamics (MD) simulation in combination with systematic experimental characterization. The adhesion of PVA to C-(N-)A-S-H gel with different Ca/(Si+Al) and Al/Si ratios was modeled using MD simulation, with the related adsorption enthalpy calculated and the adhesion mechanism explored. The experimentally attained chemical bonding energy of PVA fiber in AASF coincides well with the simulation results. In both cases, the adhesion enhances primarily with increasing Ca/(Si+Al) ratio of C-(N-)A-S-H gel. Additionally, MD simulation indicates preferential element distributions of Ca around PVA molecule, which was confirmed experimentally by the detection of the Ca-rich C-(N-)A-S-H gel in the interfacial transition zone (ITZ). }This study provides further insights into the adhesion mechanism of PVA fiber to C-(N-)A-S-H gel formed in AASF, which is particularly valuable for the future development of PVA-based high-performance alkali-activated composites.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Unraveling disadhesion mechanism of epoxy/CSH interface under aggressive conditions

Almost all FRP-reinforced concrete exposed to the marine environment are susceptible to durability deficiencies due to failure of the FRP/epoxy/concrete interface, especially the vulnerable epoxy/concrete interface, which is frequently attacked by water and ions. Herein, molecular dynamics simulations of epoxy/CSH interface under different environmental exposures are utilized to specifically elucidate the degradation principles of water and ions on the bonding properties and mechanical responses of the epoxy/concrete interface. The environmental sequences associated with the interfacial bonding degradation are arranged as Na{sub 2}SO{sub 4} + NaCl>NaCl>Na{sub 2}SO{sub 4} > Water>Dry. Remarkably, water molecules weaken the interaction between the epoxy and CSH by robbing interfacial H- and Ca-O bonds, thereby reducing the energy barrier to interfacial peel and shear failure. The weakening effects are exacerbated by the presence of aggressive ions, as Na{sup +} ions attracted to the CSH surface accumulate more water molecules in the interfacial region by forming hydrated ions clusters, which ultimately accelerates the epoxy/CSH interfacial degradation.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Initial hydration process of calcium silicates in Portland cement: A comprehensive comparison from molecular dynamics simulations

As the main components of Portland cement, calcium silicates show substantial differences in their hydration reactivity which have not been fully explained. A comprehensive comparison of the initial hydration process of calcium silicates, namely dicalcium silicate (C{sub 2}S) and tricalcium silicate (C{sub 3}S), was conducted using molecular dynamics simulations. The initial hydration process was divided into three stages using cut-off times of 0.001 ns and 3 ns. The hydration of M{sub 3}-C{sub 3}S (010) was more evident than that of β-C{sub 2}S (100), supported by the hydroxylation degree, radial distribution function, atomic density profile, etc. The coordination number of the surface Ca atoms might be the underlying reason for such a difference. Interactions between cement surfaces and water molecules were mainly characterised by solid OH bonding and Ca-water O bonding. Dissolution of Ca atoms was observed, although quite scarce, while no dissolution of Si atoms was observed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Ettringite hysteresis under sorption from molecular simulations

Highlights: • Hybrid Grand Canonical Monte Carlo (GCMC) and Molecular Dynamics (MD) simulations are performed. • Anisotropic large strain coefficient of crystal shrinkage of ettringite is provided. • Entropy increases when ettringite converts into metaettringite. • Sorption-induced stress may lead to columns collapse upon drying. • H-bonds involving OH groups in columns play a role in hysteresis. The response of ettringite under sorption is critical for the utilization of this mineral as an energy storage material and to understand the concrete durability problems associated with ettringite formation. We report molecular simulations directly sampling the osmotic ensemble to understand the sorption processes and structural changes in ettringite-metaettringite transition. Desorption branch and sorption-induced volume changes from simulations agree with the experiments. The structural changes at low relative humidity are analyzed, revealing for the first time details of metaettringite structure. The reversibility under sorption observed experimentally is captured by simulation in the ettringite domain. The reversibility in the conversion of metaettringite into ettringite is not captured by the direct simulations in the osmotic ensemble due to the large volume changes associated with ettringite desorption. Finally, we discuss the role of hydrogen bonds on the hysteresis in ettringite.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Predicting CaO-(MgO)-Al2O3-SiO2 glass reactivity in alkaline environments from force field molecular dynamics simulations

In this investigation, force field-based molecular dynamics (MD) simulations have been employed to generate detailed structural representations for a range of amorphous quaternary CaO-MgO-Al{sub 2}O{sub 3}-SiO{sub 2} (CMAS) and ternary CaO-Al{sub 2}O{sub 3}-SiO{sub 2} (CAS) glasses. Comparison of the simulation results with select experimental X-ray and neutron total scattering and literature data reveals that the MD-generated structures have captured the key structural features of these CMAS and CAS glasses. Based on the MD-generated structural representations, we have developed two structural descriptors, specifically (i) average metal oxide dissociation energy (AMODE) and (ii) average self-diffusion coefficient (ASDC) of all the atoms at melting. Both structural descriptors are seen to more accurately predict the relative glass reactivity than the commonly used degree of depolymerization parameter, especially for the eight synthetic CAS glasses that span a wide compositional range. Hence these descriptors hold great promise for predicting CMAS and CAS glass reactivity in alkaline environments from compositional information.

36 MATERIALS SCIENCE↗

DOE OSTI2024

E(n)-Equivariant cartesian tensor message passing interatomic potential

Machine learning potential (MLP) has been a popular topic in recent years for its capability to replace expensive first-principles calculations in some large systems. Meanwhile, message passing networks have gained significant attention due to their remarkable accuracy, and a wave of message passing networks based on Cartesian coordinates has emerged. However, the information of the node in these models is usually limited to scalars, and vectors. In this work, we propose High-order Tensor message Passing interatomic Potential (HotPP), an E(n) equivariant message passing neural network that extends the node embedding and message to an arbitrary order tensor. By performing some basic equivariant operations, high order tensors can be coupled very simply and thus the model can make direct predictions of high-order tensors such as dipole moments and polarizabilities without any modifications. The tests in several datasets show that HotPP not only achieves high accuracy in predicting target properties, but also successfully performs tasks such as calculating phonon spectra, infrared spectra, and Raman spectra, demonstrating its potential as a tool for future research.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Probing the active sites of oxide encapsulated electrocatalysts with controllable oxygen evolution selectivity

Electrocatalysts encapsulated by nanoscopic overlayers can control the rate of redox reactions at the outer surface of the overlayer or at the buried interface between the overlayer and the active catalyst, leading to complex behavior in the presence of two competing electrochemical reactions. This study investigated oxide encapsulated electrocatalysts (OECs) comprised of iridium (Ir) thin films coated with an ultrathin (2–10 nm thick) silicon oxide (SiO x ) or titanium oxide (TiO x ) overlayer. The performance of SiO x |Ir and TiO x |Ir thin film electrodes towards the oxygen evolution reaction (OER) and Fe(II)/Fe(III) redox reactions were evaluated. An improvement in selectivity towards the OER was observed for all OECs. Overlayer properties, namely ionic and electronic conductivity, were assessed using a combination of electroanalytical methods and molecular dynamics simulations. SiO x and TiO x overlayers were found to be permeable to H 2 O and O 2 such that the OER can occur at the MO x |Ir (M = Ti, Si) buried interface, which was further supported with molecular dynamics simulations of model SiO 2 coatings. In contrast, Fe(II)/Fe(III) redox reactions occur to the same degree with TiO x overlayers having thicknesses less than 4 nm as bare electrocatalyst, while SiO x overlayers inhibit redox reactions at all thicknesses. This observation is attributed to differences in electronic transport between the buried interface and outer overlayer surface, as measured with through-plane conductivity measurements of wetted overlayer materials. These findings reveal the influence of oxide overlayer properties on the activity and selectivity of OECs and suggest opportunities to tune these properties for a wide range of electrochemical reactions.

08 HYDROGEN↗

DOE OSTI2025

Decoding diffraction and spectroscopy data with machine learning: A tutorial

This Tutorial provides a step-by-step guide on how to apply supervised machine-learning techniques to analyze diffraction and spectroscopy data. This Tutorial details four models—a reconstruction-focused model, a regression-focused model, a hybrid reconstruction/regression model, and a multimodal model—that use x-ray diffraction profiles and vibrational density of states spectra to predict various microstructural descriptors. In this Tutorial, we cover data pre-processing steps, constructions of the models via dimensionality reduction and regression, training, and analysis of these models. Comparisons of the model’s performance are provided, highlighting the strength and weakness of the various approaches utilized.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Phase transitions and dimensional cross-over in layered confined solids

The nature of solid phases and cross-over of order–disorder phase transitions from two-dimensional (2D) layers to three-dimensional (3D) bulk in confined atomic systems remain largely unexplained. To this end, we consider noble gases and aluminum confined between graphene sheets at different pressures and temperatures. Using crystal structure search methods and molecular dynamics based on machine-learned potentials with quantum-mechanical accuracy, we identify structures of multilayer confined solids that deviate from simple close packing. Upon heating, we find that confined 2D monolayers melt according to the two-step continuous Kosterlitz–Thouless–Halperin–Nelson–Young theory. However, multilayer solids transition continuously into an intermediate layered-hexatic phase before melting discontinuously into an isotropic liquid. This intermediate phase persists at least up to 12 layers studied here. This change can be qualitatively understood based on the cross-over from 2D topological defects toward 3D ones during melting as the number of layers increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗