Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetic anisotropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Role of Si substitution in modulating the coercivity and magnetic anisotropy in Fe3CoB2 nanocrystallites

In this work, we report the impact of Si substitution on the structural and magnetic properties of Fe3CoB2 nanocrystallites as a rare-earth-free hard-magnet candidate. X-ray diffraction confirmed the formation of the tetragonal phase with an average crystallite size of ∼40 nm, while the transmission electron microscopy image revealed nanosized crystallites embedded in an amorphous matrix. Room-temperature Mössbauer spectra exhibited two sextets and two doublets, indicating magnetically ordered Fe sites in the tetragonal phase along with high-spin paramagnetic FeIII species in disordered regions. ZFC–FC magnetization curves displayed field-dependent blocking behavior, consistent with paramagnetic Fe species. Singular point detection measurements revealed a high anisotropy field of ∼10.7 kOe in the pristine Fe3CoB2, and systematically decreased with Si substitution. Magnetization measurements revealed a monotonic decrease in saturation magnetization with Si content, while coercivity was observed to increase, likely due to microstructural refinement. These results establish Fe3CoB2 as a rare-earth-free material with strong magnetic anisotropy, ideal for hard magnets.

Abbas, Hur [Department of Physics, University of T↗
DOE OSTI2023

Tuning In-Plane Magnetic Anisotropy and Interfacial Exchange Coupling in Epitaxial La 2/3 Sr 1/3 CoO 3 /La 2/3 Sr 1/3 MnO 3 Heterostructures

Controlling the in-plane magnetocrystalline anisotropy and interfacial exchange coupling between ferromagnetic (FM) layers plays a key role in next-generation spintronic and magnetic memory devices. In this work, we explored the effect of tuning the magnetocrystalline anisotropy of La 2/3 Sr 1/3 CoO 3 (LSCO) and La 2/3 Sr 1/3 MnO 3 (LSMO) layers and the corresponding effect on interfacial exchange coupling by adjusting the thickness of the LSCO layer (t LSCO ). The epitaxial LSCO/LSMO bilayers were grown on (110) o -oriented NdGaO 3 (NGO) substrates with a fixed LSMO (top layer) thickness of 6 nm and LSCO (bottom layer) thicknesses varying from 1 to 10 nm. Despite the small difference (~0.2%) in lattice mismatch between the two in-plane directions, [001] o and [11̅0] o , a pronounced in-plane magnetic anisotropy was observed. Soft X-ray magnetic circular dichroism hysteresis loops revealed that for t LSCO ≤ 4 nm, the easy axes for both LSCO and LSMO layers were along the [001] o direction, and the LSCO layer was characterized by magnetically active Co 2+ ions that strongly coupled to the LSMO layer. No exchange bias effect was observed in the hysteresis loops. In contrast, along the [11̅0] o direction, the LSCO and LSMO layers displayed a small difference in their coercivity values, and a small exchange bias shift was observed. As t LSCO increased above 4 nm, the easy axis for the LSCO layer remained along the [100] o direction, but it gradually rotated to the [11̅0] o direction for the LSMO layer, resulting in a large negative exchange bias shift. Therefore, we provide a way to control the magnetocrystalline anisotropy and exchange bias by tuning the interfacial exchange coupling between the two FM layers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the origin of magnetic anisotropy in 4f-free ferromagnets based on the CaCu 5 structure *

Using first-principles calculations, we investigate the origin of magnetocrystalline anisotropy in a series of 4f-electron-free intermetallics with CaCu 5 -based structures: YCo 5 , YCo 4 B, and Y 3 Co 13 B 2 . The electronic structure of these compounds is characterized by a set of narrow 3d bands near the Fermi level. In YCo 5 the easy-axis anisotropy originates primarily in the spin–orbit coupling-induced mixing of the electronic states with Co d x 2 -y 2 and d xy character. The analysis of k-resolved anisotropy shows that positive contributions accumulate from the entire Brillouin zone but are particularly large near the k z = 0 plane. The analysis of the single-site and two-site terms reveals a large positive single-site contribution to the magnetocrystalline anisotropy from the Co atoms on the honeycomb sublattice, along with two-site contributions from both honeycomb and kagome sublattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Role of Magnetic Anisotropy on the Hyperthermia Efficiency in Spherical Fe3−xCoxO4 (x = 0–1) Nanoparticles

The use of magnetic nanoparticles in the treatment of cancer using alternating current hyperthermia therapy has shown the potential to replace or supplement conventional cancer treatments, radiotherapy and chemotherapy, which have severe side effects. Though the nearly spherical sub-10 nm iron oxide nanoparticles have their approval from the US Food and Drug Administration, their low heating efficiency and removal from the body after hyperthermia treatment raises serious concerns. The majority of magnetic hyperthermia research is working to create nanomaterials with improved heating efficiency and long blood circulation time. Here, we have demonstrated a simple strategy to enhance the heating efficiency of sub-10 nm Fe3O4 nanoparticles through the replacement of Fe+2 ions with Co+2 ions. Magnetic and hyperthermia experiments on the 7 nm Fe3−xCoxO4 (x = 0–1) nanoparticles showed that the blocking temperature, the coercivity at 10 K, and the specific absorption rate followed a similar trend with a maximum at x = 0.75, which is in corroboration with the theoretical prediction. Our study revealed that the heating efficiency of the Fe3−xCoxO4 (x = 0–1) nanoparticles varies not just with the size and saturation magnetization but also with the magnetocrystalline anisotropy of the particles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanisms of in-plane magnetic anisotropy in superconducting NbSe 2

Here we present a unifying picture of the magnetic in-plane anisotropies of two-dimensional superconductors based on transition metal dichalcogenides. The symmetry considerations are first applied to constrain the form of the conductivity tensor. We hence conclude that the twofold periodicity of transport distinct from the planar Hall-related contributions requires a tensor perturbation. At the same time, the sixfold periodic variation of the critical field results from the Rashba spin-orbit coupling on a hexagonal lattice. We have considered the effect of a weak tensor perturbation on the critical field, gap function, and magnetoconductivity. The latter is studied using the time-dependent Ginzburg-Landau phenomenology. The common origin of the π periodicity in transport and thermodynamics properties is identified. The scheme constructed here is applied to describe the existing theoretical scenarios from a unified point of view. This allows us to single out the differences and similarities between the suggested approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Neutron scattering study of magnetic anisotropy in the tetragonal antiferromagnet Bi 2 CuO 4

In this work, we present a comprehensive study of magnon excitations in the tetragonal easy-plane antiferromagnet Bi 2 CuO 4 using inelastic neutron scattering and spin-wave analyses. The nature of low-energy magnons, and hence the anisotropy in this material, has been controversial. We show unambiguously that the low-energy magnon spectrum consists of a gapped and a gapless mode, which we attribute to out-of-plane and in-plane spin fluctuations, respectively. We modeled the observed magnon spectrum using linear spin-wave analysis of a minimal anisotropic spin model motivated by the lattice symmetry. By studying the magnetic field dependence of the (1,0,0) Bragg peak intensity and the in-plane magnon intensity, we observed a spin-flop transition in the ab plane at ~0.4 T, which directly indicates the existence of a small in-plane anisotropy that is classically forbidden. It is only by taking into account magnon zero-point fluctuations beyond the linear spin-wave approximation that we could explain this in-plane anisotropy and its magnitude, the latter of which is deduced from the critical field of the spin-flop transition. The microscopic origins of the observed anisotropic interactions are also discussed. We found that our data are inconsistent with a large Dzyaloshinskii-Moriya interaction, which suggests a potential departure of Bi 2 CuO 4 from the conventional theories of magnetic anisotropy for other cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ferroelectric control of magnetic anisotropy of 5 d transition metal monolayers

Electric field control of magnetism using ferroelectric materials offers promising applications in low-power spintronics. We have conducted systematic density functional theory calculations to investigate the magnetic properties of epitaxial 5 d transition metal monolayers on a ferroelectric substrate: PbTi⁢O 3 (PTO). Our study reveals that the magnetocrystalline anisotropy energy of the osmium monolayer is significantly enhanced to 18.1 meV/Os in the upward polarization state and, moreover, the anomalous Hall coefficient of osmium/PTO film is tunable by reversing the electric polarization of the PTO substrate. Additionally, the electric polarization reversal in PTO rotates the easy magnetization axis of the iridium and platinum monolayers by 90°, which is attributed to the rearrangement of interfacial charges. In conclusion, our findings suggest an efficient approach to control the magnetization direction of monoatomic layers and provide valuable insights for the development of low-energy spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Temperature dependence of magnetic anisotropy and magnetoelasticity from classical spin-lattice calculations

Here we present a classical molecular-spin dynamics (MSD) methodology that enables accurate computations of the temperature dependence of the magnetocrystalline anisotropy as well as magnetoelastic properties of magnetic materials. The nonmagnetic interactions are accounted for by a spectral neighbor analysis potential (SNAP) machine-learned interatomic potential, whereas the magnetoelastic contributions are accounted for using a combination of an extended Heisenberg Hamiltonian and a Néel pair interaction model, representing both the exchange interaction and spin-orbit-coupling effects, respectively. All magnetoelastic potential components are parameterized using a combination of first-principles and experimental data. Our framework is applied to the α phase of iron. Initial testing of our MSD model is done using a 0 K parametrization of the Néel interaction model. After this, we examine how individual Néel parameters impact the $B$ 1 and $B$ 2 magnetostrictive coefficients using a moment-independent δ sensitivity analysis. The results from this study are then used to initialize a genetic algorithm optimization which explores the Néel parameter phase space and tries to minimize the error in the B 1 and B 2 magnetostrictive coefficients in the range of 0–1200 K. Our results show that while both the 0 K and genetic algorithm optimized parametrization provide good experimental agreement for $B$ 1 and $B$ 2 , only the genetic algorithm optimized results can capture the second peak in the $B$ 1 magnetostrictive coefficient which occurs near approximately 800 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Growth-controlled twinning and magnetic anisotropy in CeSb 2

Cerium diantimonide (CeSb 2 ) is a layered heavy-fermion Kondo lattice material that hosts complex magnetism and pressure-induced superconductivity. The interpretation of its in-plane anisotropy has remained unsettled due to structural twinning, which superimposes orthogonal magnetic responses. Here, in this study, we combine controlled crystal growth with magnetization and rotational magnetometry to disentangle the effects of twinning. Nearly untwinned high-quality single crystals reveal the intrinsic in-plane anisotropy: The in-plane easy axis saturates at 𝑀 easy ⁡(4 T) ≈ 1.8 𝜇 B /Ce, while the in-plane hard axis magnetization is strongly suppressed, nearly linear, and comparable to the out-of-plane response. These results resolve long-standing discrepancies in reported magnetic measurements, in which in-plane metamagnetic transition fields and saturation magnetization varied significantly across previous studies. Growth experiments demonstrate that avoiding the proposed 𝛼 𝛽 structural transition—through Sb-rich flux and slower cooling—systematically reduces twinning. However, powder x-ray diffraction and differential thermal analysis measurements show no clear evidence of a distinct 𝛽 phase. Our results establish a consistent magnetic phase diagram and provide essential constraints for crystal-electric field models, enabling a clearer understanding of the interplay between anisotropic magnetism and unconventional superconductivity in CeSb 2 .

Weber, Jan T. [Goethe University, Frankfurt (Germa↗
DOE OSTI2025

Tetragonal structure and uniaxial magnetic anisotropy in the arc-melted (Ce,Zr) 2 (Fe,M) 17 (M = Mo, W, Co) alloys

The tetragonal ThMn 12 -type structure is stabilized in (Ce 1-x Zr x ) 2 T 16 M (x = 0.2 – 0.3; T = Fe or Fe/Co, M = Mo or W) arc-melted alloys. Approximately 5 at% of Mo or W admixture is sufficient to transform the hexagonal Th 2 Ni 17 -type structure of (Ce 1-x Zr x ) 2 Fe 17 into the tetragonal ThMn 12 -type structure of nearly single-phase (Ce 1-x Zr x ) 2 Fe 16 M and/or (Ce 1-x Zr x ) 2 Fe 15 CoM bulk alloys. X-ray Rietveld refinements reveal that Zr and Mo (W) substitute different sites in the tetragonal crystal structure. Zirconium preferentially replaces Ce, whereas Mo (W) substitutes Fe. At room temperature, the tetragonal phases exhibit strong ferromagnetism and a uniaxial magneto-crystalline anisotropy with anisotropy fields of 15 – 17 kOe. These materials possess room-temperature saturation magnetizations of 95 – 105 emu/g and Curie temperature of 420 – 505 K. At some concentrations, concurrent Zr and Mo (W) site occupancy facilitates 1:12 structure formation in bulk alloys with minimal presence of non-magnetic element in the Fe sublattice, thus securing the highest known magnetic moment per Fe atom (∼ 1.37 µ B ) in this type of materials. The intrinsic magnetic characteristics, as well as the absence of critical rare earths (RE), make these compounds interesting for development as low-cost permanent magnets. In conclusion, small Co additions improve the Curie temperature, especially if combined with W.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Applied Magnetic Field Increases Magnetic Anisotropy in HDDR-Processed Nd-Fe-B Alloy

We investigate the effect of an applied magnetic field on the entire HDDR process using a customized reactor vessel and a warm-bore superconducting magnet. We analyzed the resulting properties produced at both a 0 applied field and a 2 Tesla applied field. We show that the application of a magnetic field throughout the HDDR process results in powders that exhibit a greater level of anisotropy compared to their ambient field counterparts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal stability and magnetization switching of composite free layer with perpendicular magnetic anisotropy

We present a micromagnetic study of a ferromagnetically exchange-coupled composite free layer design for perpendicular magnetic tunnel junctions. The thermal stability factor and critical switching current density depend on the exchange coupling strength and effective anisotropy ratio between the sublayers of the composite free layer. The energy barrier increases with an increase of the exchange coupling strength until it reaches a plateau in the strong-coupling limit. An optimal exchange coupling strength exists that leads to the minimal critical switching current and a significant improvement of the figure of merit defined as the ratio between the energy barrier and critical switching current. This behavior is obtained for smaller device sizes with uniform reversal and larger sizes with domain wall reversal.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Large magnetic anisotropy of a decorated spin-chain system K 2 Co 3 (MoO 4 ) 3 (OH) 2

The magnetic structure of K 2 Co 3 (MoO 4 ) 3 (OH) 2 is studied in detail. The material has a half-sawtooth one-dimensional (1-D) structure containing two unique Co 2+ ions, one in the chain backbone and one on the apex of the sawtooth creating a series of isosceles triangles along the b-axis. These triangles can be a source of magnetic frustration. The ability to grow large single crystals enables detailed magnetic measurements with the crystals oriented in a magnetic field along the respective axes. It has a Curie–Weiss temperature θ CW of 5.3(2) K with an effective magnetic moment of 4.8(3)μ B /Co. The material is highly anisotropic with a sharp antiferromagnetic ordering transition at 7 K with a metamagnetic transition at 2 kOe. Neutron diffraction was used to determine the magnetic structure and revealed a magnetic structure with canted spins along the backbone of the chain while spins along the sawtooth caps maintained a colinear orientation, arranging antiferromagnetically relative to the backbone spins. In conclusion, the parallel chains arrange antiferromagnetically relative to each other along the c-axis and ferromagnetically along the a-axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controlling magnetic order, magnetic anisotropy, and band topology in the semimetals Sr(Mn 0.9 Cu 0.1 )Sb 2 and Sr(Mn 0.9 Zn 0.1 )Sb 2

Neutron diffraction and magnetic susceptibility studies show that orthorhombic single-crystals of topological semimetals Sr(Mn 0.9 Cu 0.1 ) Sb 2 and Sr(Mn 0.9 Zn 0.1 )Sb 2 undergo three-dimensional C-type antiferromagnetic (AFM) ordering of the Mn 2+ moments at T N = 200 ± 10 and 210 ± 12 K, respectively, significantly lower than that of the parent SrMnSb 2 with T N = 297 ± 3 K. Magnetization versus applied magnetic field (perpendicular to MnSb planes) below T N exhibits slightly modified de Haas van Alphen oscillations for the Zn-doped crystal as compared to that of the parent compound. By contrast, the Cu-doped system does not show de Haas van Alphen magnetic oscillations, suggesting that either Cu substitution for Mn changes the electronic structure of the parent compound substantially, or that the Cu sites are strong scatterers of carriers that significantly shorten their mean free path thus diminishing the oscillations. Density functional theory (DFT) calculations including spin-orbit coupling predict the C-type AFM state for the parent, Cu-, and Zn-doped systems and identify the a -axis (i.e., perpendicular to the Mn layer) as the easy magnetization direction in the parent and 12.5% of Cu or Zn substitutions. In contrast, 25% of Cu content changes the easy magnetization to the b-axis (i.e., within the Mn layer). Here, we find that the incorporation of Cu and Zn in SrMnSb 2 tunes electronic bands near the Fermi level resulting in different band topology and semimetallicity. The parent and Zn-doped systems have coexistence of electron and hole pockets with opened Dirac cone around the Y-point whereas the Cu-doped system has dominant hole pockets around the Fermi level with a distorted Dirac cone. The tunable electronic structure may point out possibilities of rationalizing the experimentally observed de Haas van Alphen magnetic oscillations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

High Magnetic Anisotropy and Magnetocaloric Effects in Single-Crystal Cr 2 Te 3

Here, we report a systematic investigation of anisotropic magnetocaloric effects in single-crystal Cr 2 Te 3 . Single-crystal samples are synthesized by chemical vapor transport and characterized by X-ray and Laue diffraction methods. The maximum magnetic entropy change –ΔS M max is 4.50 J kg –1 K –1 for the easy c-axis (3.36 J kg –1 K –1 for the hard axis along ab-plane), and the relative cooling power (RCP) is 296.7 J kg –1 for the easy c-axis (183.84 J kg –1 for the hard axis along ab-plane) for a magnetic field change of 9 T near the Curie temperature. The magneto-crystalline anisotropy constant K u is estimated to be 580.12 kJ m –3 at 140 K, decreasing to 148.60 kJ m –3 at 168 K. Meanwhile, the maximum of the rotational magnetic entropy change –ΔS M R (T, H) between the c-axis and the ab-plane is about 1.14 J kg –1 K –1 for magnetic-field change of 9 T. The critical exponents are estimated by analyzing magnetocaloric effects, which indicate a 2D-Ising type magnetic system. The accuracy of estimated critical exponents is verified by scaling analysis. The maximum magnetic entropy change –ΔS M max ≈ 5.25 J kg –1 K –1 (along the c-axis) and the corresponding adiabatic temperature change ΔT ad ≈ 3.31 K (along the c-axis) are estimated by analyzing heat capacity measurements with a magnetic field up to 9 T.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evolution of Structural Order and Magnetic Anisotropy in Yb 0.5 (Co 1– x Fe x ) 3 Ge 3 through Doping of a Kagome Lattice

Kagome materials provide fruitful grounds for exploring the intersection of topology and magnetism. In this article, the single crystal growth of Yb 0.5 (Co 1–x Fe x ) 3 Ge 3 (x = 0.00, 0.25, 0.50, 0.75, and 1.00) is reported. As Fe is substituted into the Co-containing kagome net, the structure transforms from the disordered Y 0.5 Co 3 Ge 3 /CoSn-type hybrid structure to the ordered HfFe 6 Ge 6 -type structure. Diffusive scattering is observed in all doped concentrations that eventually converge to a single reflection in the Fe end member, ultimately doubling the unit cell along the c-axis. Anisotropic magnetic measurements were performed to evaluate how the magnetism of the kagome lattice is influenced by Fe substitution. Magnetic interactions are primarily observed along the c-axis. Additionally, a reorientation of the magnetic easy axis is observed with increasing Fe incorporation, highlighting how the magnetism of this material can be chemically tuned. Resistivity with unusual behavior observed in the doped compositions is also reported. Furthermore, the rationale behind the structural evolution from disordered to ordered is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic anisotropy and GGG substrate stray field in YIG films down to millikelvin temperatures

Abstract Quantum magnonics investigates the quantum-mechanical properties of magnons, such as quantum coherence or entanglement for solid-state quantum information technologies at the nanoscale. The most promising material for quantum magnonics is the ferrimagnetic yttrium iron garnet (YIG), which hosts magnons with the longest lifetimes. YIG films of the highest quality are grown on a paramagnetic gadolinium gallium garnet (GGG) substrate. The literature has reported that ferromagnetic resonance (FMR) frequencies of YIG/GGG decrease at temperatures below 50 K despite the increase in YIG magnetization. We investigated a 97 nm-thick YIG film grown on 500 μm-thick GGG substrate through a series of experiments conducted at temperatures as low as 30 mK, and using both analytical and numerical methods. Our findings suggest that the primary factor contributing to the FMR frequency shift is the stray magnetic field created by the partially magnetized GGG substrate. This stray field is antiparallel to the applied external field and is highly inhomogeneous, reaching up to 40 mT in the center of the sample. At temperatures below 500 mK, the GGG field exhibits a saturation that cannot be described by the standard Brillouin function for a paramagnet. Including the calculated GGG field in the analysis of the FMR frequency versus temperature dependence allowed the determination of the cubic and uniaxial anisotropies. We find that the total crystallographic anisotropy increases more than three times with the decrease in temperature down to 2 K. Our findings enable accurate predictions of the YIG/GGG magnetic systems behavior at low and ultralow millikelvin temperatures, crucial for developing quantum magnonic devices.

Serha, Rostyslav O.↗
DOE OSTI2020

Vertically Aligned Single-Crystalline CoFe 2 O 4 Nanobrush Architectures with High Magnetization and Tailored Magnetic Anisotropy

Micrometer-tall vertically aligned single-crystalline CoFe 2 O 4 nanobrush architectures with extraordinarily large aspect ratio have been achieved by the precise control of a kinetic and thermodynamic non-equilibrium pulsed laser epitaxy process. Direct observations by scanning transmission electron microscopy reveal that the nanobrush crystal is mostly defect-free by nature, and epitaxially connected to the substrate through a continuous 2D interface layer. In contrast, periodic dislocations and lattice defects such as anti-phase boundaries and twin boundaries are frequently observed in the 2D interface layer, suggesting that interface misfit strain relaxation under a non-equilibrium growth condition plays a critical role in the self-assembly of such artificial architectures. Further, magnetic property measurements have found that the nanobrushes exhibit a saturation magnetization value of 6.16 μB/f.u., which is much higher than the bulk value. The discovery not only enables insights into an effective route for fabricating unconventional high-quality nanostructures, but also demonstrates a novel magnetic architecture with potential applications in nanomagnetic devices.

36 MATERIALS SCIENCE↗