Structural and magnetic properties of Co4N thin films stabilized with Pd doping
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
SEARCH · Search NASA
Results for “Magnetic thin films”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Large Area Transfer of Bismuth‐Based Layered Oxide Thin Films Using a Flexible Polymer Transfer Method
Magnetic and ferroelectric oxide thin films have long been studied for their applications in electronics, optics, and sensors. The properties of these oxide thin films are highly dependent on the film growth quality and conditions. To maximize the film quality, epitaxial oxide thin films are frequently grown on single-crystal oxide substrates such as strontium titanate (SrTiO 3 ) and lanthanum aluminate (LaAlO 3 ) to satisfy lattice matching and minimize defect formation. However, these single-crystal oxide substrates cannot readily be used in practical applications due to their high cost, limited availability, and small wafer sizes. One leading solution to this challenge is film transfer. In this demonstration, a material from a new class of multiferroic oxides is selected, namely bismuth-based layered oxides, for the transfer. A water-soluble sacrificial layer of Sr 3 Al 2 O 6 is inserted between the oxide substrate and the film, enabling the release of the film from the original substrate onto a polymer support layer. The films are transferred onto new substrates of silicon and lithium niobate (LiNbO 3 ) and the polymer layer is removed. These substrates allow for the future design of electronic and optical devices as well as sensors using this new group of multiferroic layered oxide films.
36 MATERIALS SCIENCE↗
Long-range magnetic order and relaxor ferroelectricity in a hexagonal high-entropy ferrite
Multiferroics that combine ferroelectricity and magnetic order are attractive for electronic and spintronic technologies, yet chemical disorder that promotes relaxor ferroelectricity usually suppresses long-range magnetic order. Here, we report entropy-stabilized relaxor multiferroicity in epitaxial hexagonal (Tb0.2Dy0.2Ho0.2Lu0.2Yb0.2)FeO3 thin films. Structural, magnetic, dielectric, and synchrotron spectroscopic measurements show the coexistence of relaxor ferroelectricity and long-range ferromagnetic order. We find that improper ferroelectricity remains robust against A-site configurational disorder, while the Fe sublattice preserves magnetic exchange. This separation of the microscopic origins of the polar and magnetic responses enables chemically disordered multiferroicity. Our results establish entropy engineering in hexagonal ferrites as a route toward multifunctional oxide thin films and provide a general design strategy for high-entropy multiferroics.
Miertschin, Duncan [Baylor University]↗
Element-Specific Study of Magnetic Anisotropy and Hardening in SmCo 5– x Cu x Thin Films
This work investigates the effect of copper substitution on the magnetic properties of SmCo 5 thin films synthesized by molecular beam epitaxy. A series of thin films with varying concentrations of Cu were grown under otherwise identical conditions to disentangle structural and compositional effects on the magnetic behavior. The combined experimental and theoretical studies show that Cu substitution at the Co 3g sites not only stabilizes the formation of the SmCo 5 structure but also enhances magnetic anisotropy and coercivity. Density functional theory calculations indicate that Sm(Co 4 Cu 3g ) 5 possesses a higher single-ion anisotropy as compared to pure SmCo 5 . In addition, X-ray magnetic circular dichroism reveals that Cu substitution causes an increasing decoupling of the Sm 4f and Co 3d moments. Scanning transmission electron microscopy confirms predominantly SmCo 5 phase formation and reveals nanoscale inhomogeneities in the Cu and Co distribution. Our study based on thin film model systems and advanced characterization as well as modeling reveals novel aspects of the complex interplay of intrinsic and extrinsic contributions to magnetic hysteresis in rare-earth-based magnets, i.e., the combination of increased intrinsic anisotropy due to Cu substitution and the extrinsic effect of inhomogeneous elemental distribution of Cu and Co.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quantum anomalous Hall effect in perfectly compensated collinear antiferromagnetic thin films
Here, we show that the quantum anomalous Hall effect almost always occurs in magnetic topological insulator thin films whenever the top and bottom surface layer magnetizations are parallel at some temperature, independent of the interior layer magnetization configuration. Using this criterion, we identify structures that have a quantum anomalous Hall effect even though they have collinear magnetic structures with no net magnetization, and discuss strategies for realizing these interesting magnetic states experimentally.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Tuning the Magnetic Properties of CrI 3 Using Ni Thin Film Deposition for Applications in Spintronic Devices
Chromium triiodide (CrI 3 ), a van der Waals magnet, has recently been shown to host Ising ferromagnetism down to the monolayer limit. It is a potentially important material in 2D magnet-based applications, such as magnetic sensors and spintronic devices. Prior studies have revealed the coexistence of two different types of interlayer magnetic coupling, the antiferromagnetic (AFM) coupling near the surface and ferromagnetic (FM) coupling in the deep bulk layers, in pristine CrI 3 crystals below the Curie temperature. In this study, we used Ni thin film deposition to tune the surface magnetic states in bulk CrI 3 . A nanometer thickness (4 nm thick) of Ni was deposited on the surface of CrI 3 using electron-beam evaporation to form a Ni/CrI 3 heterostructure. The deposited Ni thin layer forms nanoclusters that completely cover the CrI 3 surface. Magnetic states of CrI 3 before and after Ni deposition are probed by ultralow-frequency magneto-Raman spectroscopy. Instead of seeing three spin wave branches in Raman scattering below 2 T, as in pristine bulk CrI 3 , in Ni/CrI 3 , we observe only a single spin wave branch, which is softened compared to that in pristine CrI 3 and displays a Zeeman shift under an out-of-plane magnetic field up to 7 T. This observation reveals that the AFM layers on pristine CrI 3 crystal surfaces transit into FM layers, so the entire CrI 3 crystal is in the FM state after Ni deposition. First-principles calculations show that Ni atoms tend to diffuse into the CrI 3 lattice, and the FM interlayer coupling has a much lower energy than AFM coupling in the presence of Ni atoms. As a result, our studies show that the magnetic state of CrI 3 can be modified through deposition of a thin metal layer on the surface, offering a route for controlling the spin degree of freedom in van der Waals magnets.
36 MATERIALS SCIENCE↗
Reveal of Magnetic Domains and Tunable Supercell Structures in Two-dimensional Layered Oxide Thin Film via Differential Phase Contrast Imaging and Atomic-resolution STEM
Explore the source record for details and available documents.
Material Science↗
Giant spin Seebeck effect through an interface organic semiconductor
Interfacing an organic semiconductor C 60 with a non-magnetic metallic thin film (Cu or Pt) has created a novel heterostructure that is ferromagnetic at ambient temperature, while its interface with a magnetic metal (Fe or Co) can tune the anisotropic magnetic surface property of the material. Here, we demonstrate that sandwiching C60 in between a magnetic insulator (Y 3 Fe 5 O 12 :YIG) and a non-magnetic, strong spin–orbit metal (Pt) promotes highly efficient spin current transport via the thermally driven spin Seebeck effect (SSE). Experiments and first principles calculations consistently show that the presence of C 60 reduces significantly the conductivity mismatch between YIG and Pt and the surface perpendicular magnetic anisotropy of YIG, giving rise to enhanced spin mixing conductance across YIG/C 60 /Pt interfaces. As a result, a 600% increase in the SSE voltage (V LSSE ) has been realized in YIG/C 60 /Pt relative to YIG/Pt. Temperature-dependent SSE voltage measurements on YIG/C 60 /Pt with varying C 60 layer thicknesses also show an exponential increase in V LSSE at low temperatures below 200 K, resembling the temperature evolution of spin diffusion length of C 60 . Our report emphasizes the important roles of the magnetic anisotropy and the spin diffusion length of the intermediate layer in the SSE in YIG/C 60 /Pt structures, providing a new pathway for developing novel spin-caloric materials.
36 MATERIALS SCIENCE↗
Characterizing the nonequilibrium response of FeRh thin films using time-domain thermoreflectance
Time-domain thermoreflectance (TDTR) characterization of FeRh throughout its first-order antiferromagnetic (AF) to ferromagnetic (FM) transition shows that the transient reflectance ΔR(t)/R strongly depends on the magnetic order of the sample. Using TDTR, which uses optical pulses to induce small temperature excursions, we have found that ΔR(t)/R of the AF phase exhibits a large negative response, while the response of the FM phase is positive. This magnetic phase sensitivity has allowed us to study the transient response of both the AF and FM phases to the pump-pulse excitation and the mixed phase of the material. These results are significant since the ultrafast properties of antiferromagnetic materials and mixed antiferromagnetic and ferromagnetic materials are difficult to detect using other conventional techniques. We have found that the AF phase exhibits a strong subpicosecond decaying signal not observed in the FM phase. The magnetic phase dependence of the sign of ΔR(t)/R is qualitatively explained using the results of ab initio density functional theory calculations. Using the two-temperature model, we found that the change in the thermalization time across the transition is caused by differences in both the electronic heat capacity and the electron-phonon coupling factor of the AF and FM phases. The electron-phonon coupling constant in the AF phase is also determined using the two-temperature model conducted using the ntmpy code package. For the FM phase, we provide boundaries for the magnitude of the electron-phonon coupling factor for the FM phase. Finally, these results indicate that TDTR can be used to study the transient properties of magnetic materials that are otherwise challenging to probe.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Exploring magnetic anisotropy and robustness of the J eff = 1/2 state under substantial orthorhombic distortion in Sr 2 IrO 4 thin films
Here, we present a comprehensive study revealing the intricate interplay of the magnetic anisotropy and orthorhombic distortion in thin films of Sr 2 IrO 4 through a Ca 3 Ru 2 O 7 substrate. By inducing a pronounced orthorhombic distortion along the direction of oxygen octahedral edges, we effectively modulated the uniaxial magnetic anisotropy in the system. Remarkably divergent responses along the easy and hard magnetic axes were unveiled through x-ray magnetic circular dichroism (XMCD) measurements under magnetic fields. Specifically, the spin flop transition observed when the magnetic field aligns with the hard axis allows us to estimate the magnetic anisotropy energy, which is around 14.2 µeV, close to that estimated from the single magnon peak measured via Raman spectroscopy. The observed anisotropy energy remains notably lower than the linear estimates derived from the strain-anisotropy energy relationship outlined in H.-H. Kim et al., Nat. Commun. 13, 6674 (2022). This underscores the enduring preservation of the isotropic character of the J eff = 1/2 states. This is also supported by the negligible XMCD intensity ratio at the L 2 edge compared to that of the L 3 edge. Furthermore, the branching ratio determined from x-ray absorption spectroscopy shows that the expectation value of the spin-orbit coupling is similar to that of bulk Sr 2 IrO 4 single crystals. Our findings indicate that even under a substantial anisotropic biaxial distortion, Sr 2 IrO 4 remains remarkably proximate to the J eff = 1/2 state. This study not only provides valuable information in understanding the interplay between magnetic anisotropy and strain but also the robustness of the J eff = 1/2 state under octahedral distortion within materials exhibiting emergent quantum phenomena.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Emergence of exchange bias and giant coercive field enhancement by internal magnetic frustration in La 0.67 Sr 0.33 MnO 3 thin films
We have studied the influence of controlled defects on the magnetic properties of La 0.67 Sr 0.33 MnO 3 (LSMO) thin films. We used 100 nm thick epitaxial LSMO films, which were grown on SrTiO 3 substrates and introduced stoichiometry changes and defects using oxygen ion irradiation through nanoporous alumina masks. Oxygen irradiation through the mask creates cascades of defects in spatially-modulated regions in the plane of the LSMO film. The magnetic properties of the samples were compared before and after the irradiation. We have found that irradiation reduces the ferromagnetic ordering temperature, decreases the total magnetization, enhances the coercivity, and induces exchange bias below 50 K. The coercivity enhancement is dramatically higher below 50 K and can be associated with exchange bias. These results can be explained by the formation of Mn-rich antiferromagnetic or ferrimagnetic phases within the bombarded regions that are exchange coupled to the non-irradiated - ferromagnetic host.
36 MATERIALS SCIENCE↗
Direct observation of the magnetic anisotropy of an Fe(II) spin crossover molecular thin film
Abstract In this work, we provide clear evidence of magnetic anisotropy in the local orbital moment of a molecular thin film based on the SCO complex [Fe(H 2 B(pz) 2 ) 2 (bipy)] (pz = pyrazol−1−yl, bipy = 2,2′−bipyridine). Field dependent x-ray magnetic circular dichroism measurements indicate that the magnetic easy axis for the orbital moment is along the surface normal direction. Along with the presence of a critical field, our observation points to the existence of an anisotropic energy barrier in the high-spin state. The estimated nonzero coupling constant of ∼2.47 × 10 −5 eV molecule −1 indicates that the observed magnetocrystalline anisotropy is mostly due to spin–orbit coupling. The spin- and orbital-component anisotropies are determined to be 30.9 and 5.04 meV molecule −1 , respectively. Furthermore, the estimated g factor in the range of 2.2–2.45 is consistent with the expected values. This work has paved the way for an understanding of the spin-state-switching mechanism in the presence of magnetic perturbations.
74 ATOMIC AND MOLECULAR PHYSICS↗
The Role of Interfacial Interactions and Oxygen Vacancies in Tuning Magnetic Anisotropy in LaCrO 3 /LaMnO 3 Heterostructures
The interplay of lattice, electronic, and spin degrees of freedom at epitaxial complex oxide interfaces provides a route to tune their magnetic ground states. Unraveling the competing contributions is critical for tuning their functional properties. The relationship between magnetic ordering and magnetic anisotropy and the lattice symmetry, oxygen content, and film thickness in compressively strained LaMnO 3 (LMO)/LaCrO 3 (LCO) superlattices is investigated. Mn–O–Cr antiferromagnetic superexchange interactions across the heterointerface result in a net ferrimagnetic magnetic structure. Bulk magnetometry measurements reveal isotropic in-plane magnetism for as-grown oxygen-deficient thin samples due to equal fractions of orthorhombic a+a-c-, and a-a+c- twin domains. As the superlattice thickness is increased, in-plane magnetic anisotropy emerges as the fraction of the a+a-c- domain increases. On annealing in oxygen, the suppression of oxygen vacancies results in a contraction of the lattice volume, and an orthorhombic to rhombohedral transition leads to isotropic magnetism independent of the film thickness. The complex interactions are investigated using high-resolution synchrotron diffraction and X-ray absorption spectroscopy. These results highlight the role of the evolution of structural domains with film thickness, interfacial spin interactions, and oxygen-vacancy-induced structural phase transitions in tuning the magnetic properties of complex oxide heterostructures.
36 MATERIALS SCIENCE↗
Exchange bias in La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 /La 0.7 Sr 0.3 CrO 3 heterostructures
In the recent past, heterostructures of magnetic oxide thin films have attracted a great deal of research excitement due to very interesting physical properties such as antiferromagnetic interlayer coupling, tunable exchange-bias, interfacial driven magnetic properties and high mobility electron gas across the interfaces. In this work, we report on the comprehensive magnetic properties observed from the heterostructures of (2 unit cells) La 0.7 Sr 0.3 CrO 3 /(8 unit cells) La 0.7 Sr 0.3 MnO 3 /(2 unit cells) La 0.7 Sr 0.3 CrO 3 , which are epitaxially deposited on SrTiO 3 substrate by plasma-assisted oxide molecular beam epitaxy. Using SQUID magnetometer, the magnetic properties are studied when the magnetic field was applied both in plane and out of plane. The Curie temperature of this structure is found to be at 290 K. Most significantly, at 2 K, we observed a complete up/down shift (along magnetization axis) of hysteresis loop when the sample was cooled under a magnetic field of ± 5000 Oe in the in-plane configuration. We believe that the strong antiferromagnetic (super) exchange coupling of Mn-Cr across the two interfaces is responsible for the observed exchange bias. We will present and discuss our in-detailed experimental findings collected on this heterostructure as a function of temperature and magnetic field.
36 MATERIALS SCIENCE↗
Unidirectional microwave transduction with chirality selected short-wavelength magnon excitations
Nonreciprocal magnon propagation has recently become a highly potential approach of developing chip-embedded microwave isolators for advanced information processing. However, it is challenging to achieve large nonreciprocity in miniaturized magnetic thin-film devices because of the difficulty of distinguishing propagating surface spin waves along the opposite directions when the film thickness is small. In this work, we experimentally realize unidirectional microwave transduction with sub-micrometer-wavelength propagating magnons in a yttrium iron garnet (YIG) thin-film delay line. We achieve a non-decaying isolation of 30 dB with a broad field-tunable bandpass frequency range up to 14 GHz. The large isolation is due to the selection of chiral magnetostatic surface spin waves with the Oersted field generated from the coplanar waveguide antenna. Increasing the geometry ratio between the antenna width and YIG thickness drastically reduces the nonreciprocity and introduces additional magnon transmission bands. Furthermore, our results pave the way for on-chip microwave isolation and tunable delay line with short-wavelength magnonic excitations.
36 MATERIALS SCIENCE↗
Strain and Defect-Tailored Magnetotransport in NiCo 2 O 4 Thin Films and Freestanding Membranes
Magnetic spinel NiCo 2 O 4 is promising for developing spintronic applications due to its high magnetic Curie temperature, high spin polarization, fast spin dynamics, and strain-tunable magnetic anisotropy, while its electronic and magnetic properties depend sensitively on epitaxial strain and disorder. Here, in this study, we use epitaxial NiCo 2 O 4 thin films and freestanding NiCo 2 O 4 membranes as model systems to reveal the complex interplay of strain and defects in determining the metallicity and magnetotransport properties of the ferrimagnetic spinel. NiCo 2 O 4 on perovskite substrates and NiCo 2 O 4 membranes exhibit insulating behaviors and spin canting, in sharp contrast to the metallic NiCo 2 O 4 films on spinel substrates that possess strong perpendicular magnetic anisotropy. Anisotropic magnetoresistance studies provide critical information about disorder-induced spin scattering and strain-induced tetragonal magnetocrystalline anisotropy, which is corroborated by comprehensive electron microscopy characterizations. Our study presents a promising venue for designing flexible magnetic memory, sensor, and spintronic applications.
36 MATERIALS SCIENCE↗
Electronic and magnetic properties of hole-doped topological kagome Fe 1−𝑥 Mn 𝑥 Sn thin films
We have investigated the electronic and magnetic structures of topological kagome Fe 1−𝑥 Mn 𝑥 Sn (0 ≤ 𝑥 ≤ 0.3) thin films via neutron diffraction, electronic transport measurements, and ab initio density functional theory (DFT) to understand the interplay between hole doping, magnetism, and the electronic structures. Temperature-dependent neutron diffraction measurements on parent FeSn reveal the Néel temperature to be 𝑇 N ∼ 355 K and the underlying A-type antiferromagnetic ordering is associated with a wave vector 𝒒 = (001/2). Upon Mn doping to 𝑥 = 0.15, 𝑇 N decreases slightly while the magnetic ordering vector remains the same. Resistivity measurements show metallic characteristics and in-plane anisotropy down to 10 K for all the investigated samples. The effects of hole doping are mapped in terms of electronic ground state calculations via DFT which show that the Dirac point is moved closer to the Fermi level (𝐸 F ) and the flat bands get pushed away from 𝐸 F upon hole doping. However, a comparison between hole-doped Fe 1−𝑥 Mn 𝑥 Sn and electron-doped Fe 1−𝑥 Co 𝑥 Sn indicates that the Néel temperature does not scale with the position of 𝐸 F relative to the flat band. Furthermore, our results establish the antiferromagnetic state of FeSn and Fe 1−𝑥 Mn 𝑥 Sn films at room temperature, laying the groundwork for future studies of magnetism in kagome heterostructures.
36 MATERIALS SCIENCE↗