Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Journey Mapping Distributed Wind Deployment: Installer Perspectives

This work uses journey maps to assess the deployment of distributed wind technologies through the perspective of installers. Journey mapping is a human-centered design method that chronologically traces processes from the perspective of those who participate in them. The journey map will be leveraged to identify deployment pain points (i.e., manifestations of generic deployment barriers) that the Strategize, Engage, Network and Deploy (SEND) Distributed Wind project team will seek to address in future work.

17 WIND ENERGY↗
DOE OSTI2024

Radiological Mapping of Nuclear Facilities

Identifying radiological abnormalities is critical during emergencies at nuclear facilities. This facilitates a necessity for the Emergency Management (EM) to map baseline radiation levels at the Idaho National Laboratory (INL). The INL uses scintillation detectors to measure radioactivity and gamma spectrums; but, because they are heavy and costly, these detectors can be impractical for mapping radiological areas. This presentation will establish initial radiological heat maps for emergencies and test the Radiacode-103G — a handheld scintillator with GPS and Bluetooth capability with a Gadolinium Aluminum Gallium Garnet (GAGG) crystal.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2026

Latent heat thermal energy storage performance maps enabling fast & accurate building energy simulations

Thermal energy storage (TES) using phase change materials (PCMs) has gained attention as an effective approach to manage energy demand fluctuations and shift peak building loads. PCM embedded heat exchangers (PCM-HXs) offer high energy storage density and low temperature variation during phase change, being suitable for load-shifting applications. However, this component is typically evaluated using computationally expensive methods, which present significant challenges when the ultimate goal is to assess the performance of PCM-HX integrated thermal energy storage systems in the full building context. In this paper, we present a methodology to generate highly accurate and computationally efficient PCM-HX performance maps which can be easily integrated into building energy simulation tools to analyze the feasibility of space conditioning systems with latent heat PCM-based TES. The performance maps are generated using a computationally efficient PCM-HX simulation tool based on a Generalized Resistance-Capacitance Model (GRCM) which can simulate arbitrary PCM-HXs with high accuracy and significantly less computational effort compared to full CFD simulations. The methodology was verified for a case study considering a 5-ton (~17.5 kW) air-to-water heat pump-thermal energy storage system (HP-TES), which was co-simulated in Modelica for a DOE prototype small-office building in Vienna, Austria, using Spawn of EnergyPlus™. The TES performance maps provided accurate predictions of PCM-HX behavior when used as Modelica component, with deviations within 2-4% while also achieving at least 103 computational time reduction. Leveraging this faster prediction capability, four PCMs with different melting temperatures for cooling (12°C, 16°C) and heating (31°C, 36°C) were assessed to investigate their impact on system performance. This work highlights the importance of robust PCM-HX models for efficient and high-fidelity building-level simulations, presenting new opportunities for advanced control strategy development and parametric analysis of TES configurations in a computationally efficient manner

Modelica Building Simulations↗
DOE OSTI2024

Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS)

Light‐based additive manufacturing methods are widely used to print high‐resolution 3D structures for applications in tissue engineering, soft robotics, photonics, and microfluidics, among others. Despite this progress, multi‐material printing with these methods remains challenging due to constraints associated with hardware modifications, control systems, cross‐contamination, waste, and resin properties. Here, a new printing platform coined Meniscus‐enabled Projection Stereolithography (MAPS) is reported, a vat‐free method that relies on generating and maintaining a resin meniscus between a crosslinked structure and bottom window to print lateral, vertical, discrete, or gradient multi‐material 3D structures with no waste and user‐defined mixing between layers. MAPS is compatible with a wide range of resins shown and can print complex multi‐material 3D structures without requiring specialized hardware, software, or complex washing protocols. MAPS's ability to print structures with microscale variations in mechanical stiffness, opacity, surface energy, cell densities, and magnetic properties provides a generic method to make advanced materials for a broad range of applications.

bioprinting↗
DOE OSTI2026

Visual Systems Mapping to Define and Compare Woody Biomass LCAs for Sustainable Systems

The challenge addressed in this research centres on the need to choose between several biomass sources and energy production processes, while supporting rural economies and resilience of forest systems. A key barrier to effective decision-making for strategies using biomass is the lack of standardized and transparent life cycle assessment (LCA) baselines. These baselines are critical for assessing the impacts of biomass strategies but often vary due to regional factors and chosen simplifying assumptions of the LCAs. However, omitting key variables can mean the LCA omits key feedback and balancing loops relevant to fully assessing impacts of the change or test scenario. To address these complexities, this project employs a systems engineering approach: visual systems mapping. This technique is used to define the boundaries and dynamic behaviours of LCA baselines, enhancing transparency. By examining five literature sources and their documented baseline scenarios, the systems mapping case-studies demonstrates an approach to documenting and archiving these baselines. Recommendations are that visual systems mapping should be used to document key assumptions, such as baselines, of LCAs. Further, where possible open data repositories should hold key information about LCA baselines and reproducible workflows (e.g., using open-source tools) should be used to improve transparency and comparability in LCAs. Given the consensus within the broader scientific community on the importance of replicable data practices, this research reinforces the need for standardized frameworks and systems engineering tools in LCAs. This research demonstrates a pathway to more transparent, standardized, and comparable LCAs, that may bolster decisions for biomass systems.

Davis, Maggie [ORNL] (ORCID:0000000181319328)↗
DOE OSTI2025

On observers in holographic maps

A straightforward gravitational path integral calculation implies that closed universes are trivial, described by a one dimensional Hilbert space. Two recent papers by Harlow-Usatyuk-Zhao and Abdalla-Antonini-Iliesiu-Levine have sought to ameliorate this issue by defining special rules to incorporate observers into the path integral. However, the proposed rules are different, leading to differing results for the Hilbert space dimension. Moreover, the former work offers a holographic map realized using a non-isometric code construction to complement their path integral result and clarify its physics. In this work, we propose a non-isometric code that implements the second construction, allowing thorough comparison. Our prescription may be thought of as simply removing the portion of the map that acts on the observer, while preserving the rest, creating an effective holographic boundary at the observer-environment interface. This proposal can be directly applied to general holographic maps for both open and closed universes of any dimension.

AdS-CFT correspondence↗
DOE OSTI2025

On the completeness of contraction map proof method for holographic entropy inequalities

The contraction map proof method is the commonly used method to prove holographic entropy inequalities. Existence of a contraction map corresponding to a holographic entropy inequality is a sufficient condition for its validity. But is it also necessary? In this note, we answer that question in affirmative for all linear holographic entropy inequalities with rational coefficients. We show that the pre-image of a non-contraction map is not a hypercube, but a proper cubical subgraph, and show that this manifests as alterations to the geodesic structure in the bulk, which leads to the violation of inequalities by holographic geometries obeying the RT formula.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Isochronous and period-doubling diagrams for symplectic maps of the plane

Symplectic mappings of the plane serve as key models for exploring the fundamental nature of complex behavior in nonlinear systems. Central to this exploration is the effective visualization of stability regimes, which enables the interpretation of how systems evolve under varying conditions. While the area-preserving quadratic Hénon map has received significant theoretical attention, a comprehensive description of its mixed parameter-space dynamics remain lacking. This limitation arises from early attempts to reduce the full two-dimensional phase space to a one-dimensional projection, a simplification that resulted in the loss of important dynamical features. Consequently, there is a clear need for a more thorough understanding of the underlying qualitative aspects. This paper aims to address this gap by revisiting the foundational concepts of reversibility and associated symmetries, first explored in the early works of G.D. Birkhoff. We extend the original framework proposed by Hénon by adding a period-doubling diagram to his isochronous diagram, which allows to represents the system’s bifurcations and the groups of symmetric periodic orbits that emerge in typical bifurcations of the fixed point. A qualitative and quantitative explanation of the main features of the region of parameters with bounded motion is provided, along with the application of this technique to other symplectic mappings, including cases of multiple reversibility. Modern chaos indicators, such as the Reversibility Error Method (REM) and the Generalized Alignment Index (GALI), are employed to distinguish between various dynamical regimes in the mixed space of variables and parameters. These tools prove effective in differentiating regular and chaotic dynamics, as well as in identifying twistless orbits and their associated bifurcations. Additionally, we discuss the application of these methods to real-world problems, such as visualizing dynamic aperture in accelerator physics, where our findings have direct relevance.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Exploring the potential of using L-Band InSAR for the mapping of flooded vegetation in tropical wetlands

Wetlands play a critical role in global water and carbon cycles, yet monitoring their water extent remains difficult, particularly beneath dense vegetation. SAR-based techniques such as backscatter thresholding are limited by complex scattering mechanisms, while fully polarimetric SAR (PolSAR) data capable of detecting doublebounce scattering remain scarce. To address these challenges, this study evaluates the potential of Interferometric SAR (InSAR) for mapping water surfaces beneath vegetation, termed flooded vegetation, using the Atrato floodplain in Colombia as a case study. We develop an automated workflow combining InSAR fringe detection with local phase homogeneity analysis and random sampling of processing parameters to generate probabilistic flooded vegetation maps. Applied to ALOS PALSAR-1 L-band image pairs from 2007–2011, the workflow captures seasonal fluctuations in flooded extent ranging from 500 to 1,500 km2. Compared to other L-band SAR inundation products, the InSAR-based maps identify broader flooded areas, with ~70% agreement in pairwise comparisons. Around 84% of detections align with existing wetland inventories and seasonal changes correspond with regional hydrological indicators, including terrestrial water storage anomalies and water gauge measurements. PolSAR analysis shows that InSAR complements backscatter-based methods by detecting inundation in areas with weak double-bounce signals. These findings suggest that combining InSAR with backscatter-based methods can improve detection of flooded vegetation, which is especially relevant for the upcoming NISAR mission that will offer frequent global L-band observations.

Coastal inundation↗
DOE OSTI2025

Flux Channeling Induced Nanoconfinement and Enhancement of Microwaves Imaged by Rabi Oscillation Mapping

With rapid advances in qubit technologies, techniques for localizing, modulating, and measuring RF fields and their impact on qubit performance are of the utmost importance. Here, we demonstrate that flux-channeling from a permalloy nanowire can be used to achieve localized spatial modulation of an RF field and that the modulated field can be mapped with high resolution by using the Rabi oscillations of an NV center. Rabi maps reveal ∼100 mm wavelength microwaves concentrated in sub-300 nm regions with up to ∼16× power enhancement. This modulation is robust over a 20 dBm power range and has no adverse impact on NV T 2 coherence time. Micromagnetic simulations confirm that the modulated field results from the nanowire’s stray field through its constructive/destructive interference with the incident RF field. Our findings provide a new pathway for controlling qubits, amplifying RF signals, and mapping local fields in various on-chip RF technologies.

Diamond↗
DOE OSTI2026

Large Eddy Simulations of the Atmospheric Boundary Layer Over Satellite‐Sensed Sea Ice Maps

Surface heterogeneity in the marginal ice zone (MIZ) causes multiscale secondary atmospheric circulations that are challenging to model or observe. The absence or inadequate representation of these circulations in ocean‐atmosphere exchange schemes in climate models is partially responsible for the underestimation of Arctic sea ice loss. Observationally, such circulations obfuscate the interpretation of polar atmospheric chemistry measurements, among others. To address this open challenge, large‐eddy simulations are conducted over real‐world satellite‐sensed sea ice maps with an ice‐sea temperature contrast, as well as over idealizations of these maps that alter the ice pattern but conserve its fraction, showing that the ice fraction of a surface is not sufficient to predict the surface heat flux. In a second suite of simulations, three other heterogeneity metrics (representing the surface fragmentation, patch edge tortuosity, and patch size variability) are introduced to complement the ice fraction in describing the surface. Simulations varying these parameters suggest that they also significantly impact surface‐air interactions. A roughness contrast is then added to the surface temperature contrast, indicating that the contribution of roughness changes to the resulting atmospheric circulations is less pronounced than that of thermal heterogeneity. Based on these results, we illustrate, using a multi‐linear regression on these map features, that MIZ surface parameterizations in Earth Systems Models can be improved if they account for these various characteristics of the sea‐ice patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Quantitative local state of charge mapping by operando electrochemical fluorescence microscopy in porous electrodes

We introduce operando quantitative electrochemical fluorescence state of charge mapping (QEFSM), a non-invasive technique to study operating electrochemical systems along with a new design of optically transparent microfluidic redox flow cells compatible with the most demanding optical requirements. QEFSM allows quantitative mappings of the concentration of a particular oxidation state of a redox-active species within a porous electrode during its operation. In this study, we used confocal microscopy to map the fluorescence signal of the reduced form of 2,7-anthraquinone disulfonate (AQDS) in a set of multistep-chronoamperometry experiments. Calibrating these images and incorporating an analytical model of quinhydrone heterodimer formation with no free parameters, and accounting for the emission of each species involved, we determined the local molecular concentration and the state of charge (SOC) fields within a commercial porous electrode during operation. With this method, electrochemical conversion and species advection, reaction and diffusion can be monitored at heretofore unprecedented transverse and axial resolution (1 μm and 25 μm, respectively) at frame rates of 0.5 Hz, opening new routes to understanding local electrochemical processes in porous electrodes. Here, we observed pore-scale SOC inhomogeneities appearing when the fraction of electroactive species converted in a single pass through the electrode becomes large.

42 ENGINEERING↗
DOE OSTI2025

The Atacama Cosmology Telescope: DR6 maps

We present Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) maps of the Cosmic Microwave Background temperature and polarization anisotropy at arcminute resolution over three frequency bands centered on 98, 150 and 220 GHz. The maps are based on data collected with the AdvancedACT camera over the period 2017–2022 and cover 19,000 square degrees with a median combined depth of 10 μK arcmin. We describe the instrument, mapmaking and map properties and illustrate them with a number of figures and tables.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Pixel response characterization of the ARCADIA fully depleted MAPS

Monolithic Active Pixel Sensors (MAPS) achieved widespread use in several scientific applications, thanks to their properties, such as low material budget and high granularity. The ARCADIA INFN project developed a Fully-Depleted MAPS (FD-MAPS), using a modified LFoundry 110 nm CIS process. This work presents the first laboratory characterization of the ARCADIA MD3 prototype. Measurements include threshold uniformity studies using both test-pulse injection and a 55 Fe source, as well as threshold and noise calibration achieved thanks to monochromatic X-ray sources. Ultimately, charge-collection efficiency is evaluated using an infrared laser setup.

Particle tracking detectors↗
DOE OSTI2026

Ecological Insights from Transferable Plant Biomass Mapping across the Arctic using High-resolution Structure-from-Motion and LiDAR Data

Warmer temperatures, permafrost thaw, and increased wildfire activity are driving rapid ecological change across the Arctic, significantly altering plant productivity and aboveground biomass (AGB). These rapid changes highlight the urgent need to improve monitoring of vegetation dynamics in the Earth’s northern ecosystems, where high spatiotemporal heterogeneity occurs at scales finer than those captured by traditional satellite observations. The growing use of Unoccupied Aerial Systems (UASs) presents an opportunity to overcome this limitation. Yet, the diversity of UAS platforms, sensors, and data collection and processing workflows presents challenges for developing standardized, generalizable approaches. To address this challenge, we compiled 672 AGB plots co-located with 183 UAS-based Structure-from-Motion (SfM) or Light Detection and Ranging (LiDAR) surveys collected across the Arctic. Here, we: (1) evaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB, (2) assessed scaling errors and their sources in two recent satellite-based AGB products derived from Landsat and MODIS, and (3) demonstrated the use of high-resolution AGB maps to quantify biomass variation across tundra plant functional types (PFTs) and to monitor post-fire recovery. Our results show that both SfM and LiDAR accurately captured AGB and its variability across tundra PFTs using a Random Forest (RF) model (overall RMSE: 0.336 kg/m2), with mapping performance varying slightly by region and data source. Using UAS-derived AGB maps as a benchmark, we identified systematic biases in satellite-derived AGB products, largely attributable to the magnitude of AGB and structural heterogeneity within coarse-resolution pixels. Applying our model to repeat UAS surveys following a tundra fire on Seward Peninsula, we observed rapid AGB recovery in non-shrub patches, with biomass recovering to pre-fire levels within 2 years. In contrast, shrub patches recovered more slowly, with AGB gains continuing over 2–4 years through both in-patch growth and lateral expansion (via dispersal) into remaining burned areas. Overall, these findings demonstrate the generalizability of UAS-based SfM and LiDAR data for estimating tundra AGB and highlight the potential of our approach to be broadly applied to generate high-quality AGB data for ecological monitoring and model benchmarking across the Arctic.

Yang, Daryl [ORNL] (ORCID:0000000317057823)↗
DOE OSTI2024

Integrable symplectic maps with a polygon tessellation

Identifying integrable dynamics remains a formidable challenge, and despite centuries of research, only a handful of examples are known to date. In this article, we explore a distinct form of area-preserving (symplectic) mappings derived from the stroboscopic Poincaré cross section of a kicked rotator—an oscillator subjected to an external force periodically switched on in short pulses. The significance of this class of problems extends to various applications in physics and mathematics, including particle accelerators, crystallography, and studies of chaos. Notably, Suris's theorem constrains the integrability within this category of mappings, outlining potential scenarios with analytic invariants of motion. In this paper, we challenge the assumption of the analyticity of the invariant by exploring piecewise linear transformations on a torus ( T 2 ) and associated systems on the plane ( R 2 ), incorporating arithmetic quasiperiodicity and discontinuities. Introducing a new automated technique, we discovered previously unknown scenarios featuring polygonal invariants that form perfect tessellations and, moreover, fibrations of the plane or torus. This work reveals a novel category of planar tilings characterized by discrete symmetries that emerge from the invertibility of transformations and are intrinsically linked to the presence of integrability. Our algorithm relies on the analysis of the Poincaré rotation number and its piecewise monotonic nature for integrable cases, contrasting with the noisy behavior in the case of chaos, thereby allowing for clear separation. Some of the newly discovered systems exhibit the peculiar behavior of “integrable diffusion,” characterized by infinite and quasirandom hopping between tiles while being confined to a set of invariant segments. Finally, through the implementation of a smoothening procedure, all mappings can be generalized to quasi-integrable scenarios with suppressed volume occupied by chaotic trajectories, thereby opening doors to potential practical applications. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Introducing a multiscale feature integration network for inpainting with applications to enhanced CMB map reconstruction

We introduce a novel neural network, SkyReconNet, which combines the expanded receptive fields of dilated convolutional layers along with standard convolutions, to capture both the global and local features for reconstructing the missing information in an image. We implement our network to inpaint the masked regions in a full-sky cosmic microwave background (CMB) map. Inpainting CMB maps is a particularly formidable challenge when dealing with extensive and irregular masks, such as galactic masks which can obscure substantial fractions of the sky. The hybrid design of SkyReconNet leverages the strengths of standard and dilated convolutions to accurately predict CMB fluctuations in the masked regions by effectively utilizing the information from surrounding unmasked areas. During training, the network optimizes its weights by minimizing a composite loss function that combines the structural similarity index measure (SSIM) and mean squared error (MSE). SSIM preserves the essential structural features of the CMB, ensuring an accurate and coherent reconstruction of the missing CMB fluctuations, while MSE minimizes the pixelwise deviations, thus enhancing the overall accuracy of the predictions. The predicted CMB maps and their corresponding angular power spectra align closely with the targets, achieving the performance limited only by the fundamental uncertainty of cosmic variance. The network’s generic architecture enables application to other physics-based challenges involving data with missing or defective pixels, systematic artifacts, etc. In conclusion, our results demonstrate its effectiveness in addressing the challenges posed by large irregular masks, offering a significant inpainting tool not only for CMB analyses but also for image-based experiments across disciplines where such data imperfections are prevalent.

Cosmic microwave background↗
DOE OSTI2025

A continuous calibration of the ATLAS flavour-tagging classifiers via optimal transportation maps

A calibration of the ATLAS flavour-tagging algorithms using a new calibration procedure based on optimal transportation maps is presented. Simultaneous, continuous corrections to the b-jet, c-jet, and light-flavour jet classification probabilities from jet-tagging algorithms in simulation are derived for b-jets using $t\bar{t} \rightarrow e\mu \nu \nu bb$ data. After application of the derived calibration maps, closure between simulation and observation is achieved for jet flavour observables used in ATLAS analyses of Large Hadron Collider (LHC) Run 2 proton-proton collision data. This continuous calibration opens up new possibilities for the future use of jet flavour information in LHC analyses and also serves as a guide for deriving high-dimensional corrections to simulation via transportation maps, an important development for a broad range of inference tasks.

Aad, G. [Aix-Marseille Université] (ORCID:00000002↗