Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mesh correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

An Algebraic Multigrid Solver for Navier-Stokes Problems in the Discrete Second-Order Approximation

An algebraic multigrid scheme is presented for solving the discrete Navier-Stokes equations to second-order accuracy using the defect-correction method. Solutions have been obtained for problems involving both structured and unstructured meshes, with the resolution and resolution grading controlled by global and local mesh refinements. The solver is efficient and robust to the extent that no underrelaxation of variables has been required to ensure convergence, but rates of convergence can be improved with small amounts of underrelaxation of the velocity-pressure coupling. Provided that the computational mesh can resolve the flow field, convergence characteristics are almost mesh independent. Rates of convergence actually improve with refinement, asymptotically approaching mesh independent values. For extremely coarse meshes where dispersive truncation errors would be expected to prevent convergence (or even induce divergence), solutions can still be obtained by using explicit underrelaxation in the iterative cycle.

Webster, R.↗
NASA NTRS2002

Face Gear Drive with Spur Involute Pinion: Geometry, Generation by a Worm, Stress Analysis

A face gear drive with a spur involute pinion is considered. The generation of the face gear is based on application of a grinding or cutting worm whereas the conventional method of generation is based on application of an involute shaper. An analytical approach is proposed for the determination of: (1) the worm thread surface; (2) avoidance of singularities of the worm thread surface, (air) dressing of the worm; and (3) determination of stresses of the face-gear drive. A computer program for simulation of meshing and contact of the pinion and face-gear has been developed. Correction of machine-tool settings is proposed for reduction of the shift of the bearing contact caused by misalignment. An automatic development of the model of five contacting teeth has been proposed for stress analysis. Numerical examples for illustration of the developed theory are provided.

Litvin, Faydor L.↗
NASA NTRS1995

Contact Stress Analysis of Spiral Bevel Gears Using Finite Element Analysis

A procedure is presented for performing three-dimensional stress analysis of spiral bevel gears in mesh using the finite element method. The procedure involves generating a finite element model by solving equations that identify tooth surface coordinates. Coordinate transformations are used to orientate the gear and pinion for gear meshing. Contact boundary conditions are simulated with gap elements. A solution technique for correct orientation of the gap elements is given. Example models and results are presented.

Bibel, G. D.↗
NASA NTRSDate not supplied

Quantitative Approach for the Accurate CFD Simulation of Hover in Turbulent Flow

Time-dependent Navier-Stokes simulations have been carried out for a V22 rotor in hover using an improved, low-diffusion, HLLE++ upwind algorithm in the OVERFLOW code. Emphasis is placed on lessons learned over the past decade regarding the effects of high-order spatial accuracy, grid resolution, and the use of detached eddy simulation in predicting the rotor performance, i.e., figure-of-merit (FM). A quick-start procedure is described together with a statistical measure of FM convergence that reduces hover computations by 5 times, similar in computational work for forward flight. Furthermore, Cartesian adaptive mesh refinement in the rotor wake revealed a complex turbulent flow with worm-like structures of various scales. These turbulent worms, found computationally more than a decade ago, have recently been observed in a separate German Aerospace Center (DLR) experiment. Moreover, adaptive mesh refinement has been used to resolve the tip-vortex to its correct physical size.

Neal M. Chaderjian↗
DOE OSTI2022

MCNP6.3 Unstructured Mesh Verification: GodivR and CANDU Models

A geometric cell of the Monte Carlo N-Particle (MCNP)1 transport code is traditionally created by using Boolean operators on defined surfaces. This constructive solid geometry (CSG) capability has been available in the MCNP code since its beginning. However, a CSG model approach is limited when it comes to constructing a representative geometry for a complex model in its ability to capture a correct model representation. Starting with the version 6.0, the MCNP code has the ability of embedding an unstructured mesh (UM) model into a CSG cell to create a hybrid geometry [1]. The MCNP UM feature provides the flexibility of defining very complex geometries because computer aided design (CAD) and mesh generation software packages can be utilized to construct UM models for MCNP simulations.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1991

Three dimensional unstructured multigrid for the Euler equations

The three-dimensional Euler equations are solved on unstructured tetrahedral meshes using a multigrid strategy. The driving algorithm consists of an explicit vertex-based finite-element scheme, which employs an edge-based data-structure to assemble the residuals. The multigrid approach employs a sequence of independently generated coarse and fine meshes to accelerate the convergence to steady-state of the fine grid solution. Variables, residuals and corrections are passed back and forth between the various grids of the sequence using linear interpolation. The addresses and weights for interpolation are determined in a preprocessing stage using an efficient graph traversal algorithm. The preprocessing operation is shown to require a negligible fraction of the CPU time required by the overall solution procedure, while gains in overall solution efficiencies greater than an order of magnitude are demonstrated on meshes containing up to 350,000 vertices. Solutions using globally regenerated fine meshes as well as adaptively refined meshes are given.

Mavriplis, D. J.↗
DOE OSTI2023

Unified analysis of finite-size error for periodic Hartree-Fock and second order Møller-Plesset perturbation theory

Despite decades of practice, finite-size errors in many widely used electronic structure theories for periodic systems remain poorly understood. For periodic systems using a general Monkhorst-Pack grid, there has been no comprehensive and rigorous analysis of the finite-size error in the Hartree-Fock theory (HF) and the second order Møller-Plesset perturbation theory (MP2), which are the simplest wavefunction based method, and the simplest post-Hartree-Fock method, respectively. Such calculations can be viewed as a multi-dimensional integral discretized with certain trapezoidal rules. Due to the Coulomb singularity, the integrand has many points of discontinuity in general, and standard error analysis based on the Euler-Maclaurin formula gives overly pessimistic results. The lack of analytic understanding of finite-size errors also impedes the development of effective finite-size correction schemes. We propose a unified analysis to obtain sharp convergence rates of finite-size errors for the periodic HF and MP2 theories. Our main technical advancement is a generalization of the result of Lyness [Math. Comp. 30 (1976), pp. 1–23] for obtaining sharp convergence rates of the trapezoidal rule for a class of non-smooth integrands. Our result is applicable to three-dimensional bulk systems as well as low dimensional systems (such as nanowires and 2D materials). Our unified analysis also allows us to prove the effectiveness of the Madelung-constant correction to the Fock exchange energy, and the effectiveness of a recently proposed staggered mesh method for periodic MP2 calculations (see X. Xing, X. Li, and L. Lin [J. Chem. Theory Comput. 17 (2021), pp. 4733–4745]). In conclusion, our analysis connects the effectiveness of the staggered mesh method with integrands with removable singularities, and suggests a new staggered mesh method for reducing finite-size errors of periodic HF calculations.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1978

Marching methods for elliptic problems. II, III

Higher-order operators for marching methods for elliptic equations are considered. Higher-order is understood in the sense of higher-order accuracy solutions to second-order Poisson equations, and in the sense of higher-order elliptic equations such as the biharmonic equation. The use of deferred corrections for overcoming stability problems is illustrated. Direct and iterative methods of extending the mesh size are considered. Multiple marching, patching, and influence extending techniques are described.

Roache, P. J.↗
NASA NTRS2010

LES/RANS Simulation of a Supersonic Reacting Wall Jet

This work presents results from large-eddy / Reynolds-averaged Navier-Stokes (LES/RANS) simulations of the well-known Burrows-Kurkov supersonic reacting wall-jet experiment. Generally good agreement with experimental mole fraction, stagnation temperature, and Pitot pressure profiles is obtained for non-reactive mixing of the hydrogen jet with a non-vitiated air stream. A lifted flame, stabilized between 10 and 22 cm downstream of the hydrogen jet, is formed for hydrogen injected into a vitiated air stream. Flame stabilization occurs closer to the hydrogen injection location when a three-dimensional combustor geometry (with boundary layer development resolved on all walls) is considered. Volumetric expansion of the reactive shear layer is accompanied by the formation of large eddies which interact strongly with the reaction zone. Time averaged predictions of the reaction zone structure show an under-prediction of the peak water concentration and stagnation temperature, relative to experimental data and to results from a Reynolds-averaged Navier-Stokes calculation. If the experimental data can be considered as being accurate, this result indicates that the present LES/RANS method does not correctly capture the cascade of turbulence scales that should be resolvable on the present mesh. Instead, energy is concentrated in the very largest scales, which provide an over-mixing effect that excessively cools and strains the flame. Predictions improve with the use of a low-dissipation version of the baseline piecewise parabolic advection scheme, which captures the formation of smaller-scale structures superimposed on larger structures of the order of the shear-layer width.

Edwards, Jack R.↗
NASA NTRS2013

On Spurious Numerics in Solving Reactive Equations

The objective of this study is to gain a deeper understanding of the behavior of high order shock-capturing schemes for problems with stiff source terms and discontinuities and on corresponding numerical prediction strategies. The studies by Yee et al. (2012) and Wang et al. (2012) focus only on solving the reactive system by the fractional step method using the Strang splitting (Strang 1968). It is a common practice by developers in computational physics and engineering simulations to include a cut off safeguard if densities are outside the permissible range. Here we compare the spurious behavior of the same schemes by solving the fully coupled reactive system without the Strang splitting vs. using the Strang splitting. Comparison between the two procedures and the effects of a cut off safeguard is the focus the present study. The comparison of the performance of these schemes is largely based on the degree to which each method captures the correct location of the reaction front for coarse grids. Here "coarse grids" means standard mesh density requirement for accurate simulation of typical non-reacting flows of similar problem setup. It is remarked that, in order to resolve the sharp reaction front, local refinement beyond standard mesh density is still needed.

Numerics↗
NASA NTRSDate not supplied

Scale resolving simulations of the NASA Juncture Flow Model using the LAVA solver

Two distinct simulation methodologies: Delayed Detached Eddy Simulation (DDES) and stress based Wall-modelled Large Eddy Simulation (WMLES) are evaluated using structured overset curvilinear grids for the NASA juncture flow model. While both methodologies are shown to mitigate the primary shortcomings of steady state Reynolds Averaged Navier Stokes(RANS) simulations, several unresolved aspects are identified. Strong sensitivity to RANS-typegrid refinement is observed in the DDES with a substantial deterioration of the solution quality with increasing spatial resolution associated with deficiencies in the shielding function. Mean profiles for attached boundary layers on the fuselage show spurious inflections suggesting modelled stress depletion on finer grids. Lower numerical dissipation in terms of spatial discretization and time step size is seen to improve the solution quality, and the advantage of using RC and QCR2000 corrections in the underlying RANS closure is demonstrated for DDES on RANS-type meshes. Equilibrium Wall-Modelled LES used grids that resolved the tripping dots over the fuselage nose and the wing leading edge, consistent with the experiment setup. These simulations resulted in a cost-competitive approach compared to DDES on RANS-type grids. Although the agreement between WMLES predictions of first and second order single point statistics with experimental measurements is promising, a fundamental shortcoming is noted in terms of an overshoot in streamwise momentum in corner regions of the wing-fuselage juncture. This excess momentum subsequently delays the onset of separation,thereby resulting in an underprediction in length of the separation bubble. Some quantitative sensitivity to numerical discretization is observed; lowering of numerical dissipation shows better agreement with the experiment.

T^3↗
NASA NTRS1991

Three dimensional unstructured multigrid for the Euler equations

The three dimensional Euler equations are solved on unstructured tetrahedral meshes using a multigrid strategy. The driving algorithm consists of an explicit vertex-based finite element scheme, which employs an edge-based data structure to assemble the residuals. The multigrid approach employs a sequence of independently generated coarse and fine meshes to accelerate the convergence to steady-state of the fine grid solution. Variables, residuals and corrections are passed back and forth between the various grids of the sequence using linear interpolation. The addresses and weights for interpolation are determined in a preprocessing stage using linear interpolation. The addresses and weights for interpolation are determined in a preprocessing stage using an efficient graph traversal algorithm. The preprocessing operation is shown to require a negligible fraction of the CPU time required by the overall solution procedure, while gains in overall solution efficiencies greater than an order of magnitude are demonstrated on meshes containing up to 350,000 vertices. Solutions using globally regenerated fine meshes as well as adaptively refined meshes are given.

Mavriplis, D. J.↗
DOE OSTI2022

Transient simulation of biomass combustion in a circulating fluidized bed riser

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has sky-rocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing, which results in higher combustion efficiency and the ability to use lower rank fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions, while SO 2 emissions can be conveniently controlled through the addition of Ca-based sulfur sorbents within the combustor. Herin this paper summarizes the modeling effort on a 50 kW th CFB combustor designed, built, and operated at CanmetENERGY in Ottawa, Canada. The numerical model employs the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite. The MFiX-PIC model parameters for the simulation are tuned against cold-flow experiments from CanmetENERGY using olivine sand as the inert bed material. It is shown that for the relatively coarse fluid meshes and large parcel sizes necessitated by the scale of the simulation, filter size dependent corrections to the drag law must be incorporated to ensure accuracy of the simulation results. The validated cold flow model is extended to simulate reacting flow with torrefied hardwood as the feedstock and to validate the combustion reaction scheme. The species concentrations at the riser outlet are compared against CanmetENERGY’s experiments and show satisfactory agreement. The simulations demonstrate the ability of MFiX-PIC to accurately capture both the physics and chemistry of a CFB combustor at bench scales, which can be further extended to pilot- and industrial-scale systems.

09 BIOMASS FUELS↗
DOE OSTI2020

Biomass Combustion in a Circulating Fluidized Bed Combustor

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing resulting in higher combustion efficiency and the ability to use lower quality fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions. SO 2 emissions are conveniently controlled through the addition of Ca-based sulphur sorbents within the combustor. This report summarizes the current modeling effort on a 50 kW th CFB combustor with a diameter of 10 cm and a height of 5 m; designed, built, and operated at CanmetENERGY in Ottawa, Canada employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite. The MFiX-PIC model parameters for the simulation are tuned against cold-flow experiments from CanmetENERGY using 9 kg of olivine sand as the inert bed material. It is shown that for the relatively coarse fluid meshes and large parcel sizes necessitated by the scale of the simulation, filter size dependent corrections to the drag law must be incorporated to ensure accuracy of the simulation results. The validated cold flow model is extended to simulate reacting flow with torrefied hardwood as the feedstock and to validate the combustion reaction scheme. The species concentrations at the riser outlet are compared against CanmetENERGY’s experiments and show satisfactory agreement. The simulations demonstrate the ability of MFiX-PIC to accurately capture the physics and chemistry of a circulating fluidized bed combustor at bench scales, which can be further extended to pilot- and industrial-scale systems.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1979

An accurate method for two-point boundary value problems

A second-order method for solving two-point boundary value problems on a uniform mesh is presented where the local truncation error is obtained for use with the deferred correction process. In this simple finite difference method the tridiagonal nature of the classical method is preserved but the magnitude of each term in the truncation error is reduced by a factor of two. The method is applied to a number of linear and nonlinear problems and it is shown to produce more accurate results than either the classical method or the technique proposed by Keller (1969).

Walker, J. D. A.↗
NASA NTRS1983

Propagation of flexural and membrane waves with fluid loaded NASTRAN plate and shell elements

Modeling of flexural and membrane type waves existing in various submerged (or in vacuo) plate and/or shell finite element models that are excited with steady state type harmonic loadings proportioned to e(i omega t) is discussed. Only thin walled plates and shells are treated wherein rotary inertia and shear correction factors are not included. More specifically, the issue of determining the shell or plate mesh size needed to represent the spatial distribution of the plate or shell response is of prime importance towards successfully representing the solution to the problem at hand. To this end, a procedure is presented for establishing guide lines for determining the mesh size based on a simple test model that can be used for a variety of plate and shell configurations such as, cylindrical shells with water loading, cylindrical shells in vacuo, plates with water loading, and plates in vacuo. The procedure for doing these four cases is given, with specific numerical examples present only for the cylindrical shell case.

Kalinowski, A. J.↗
NASA NTRS1986

Improving the convergence rate to steady state of parabolic ADI methods

The present, residuals' L(2)-norms analysis of the rate of convergence to steady state for parabolic ADI solvers allows the prediction of the number of iterations required for convergence, as a function of the Courant number alpha. A modification of current ADI codes is presented which significantly improves the convergence rate and is insensitive to the Courant number over a large range of alpha. This corrected algorithm is tested for the cases of Dirichlet problems for uniform grids of many mesh sizes, mixed Dirichlet-Neumann problems, and problems defined on stretched grids and/or problems with variable coefficients.

Abarbanel, Saul S.↗
NASA NTRS2002

Drag Prediction for the DLR-F4 Wing/Body using OVERFLOW and CFL3D on an Overset Mesh

This paper reviews the importance of numerical drag prediction in an aircraft design environment. A chronicle of collaborations between the authors and colleagues is discussed. This retrospective provides a road-map which illustrates some of the actions taken in the past seven years in pursuit of accurate drag prediction. The advances made possible through these collaborations have changed the manner in which business is conducted during the design of all-new aircraft. The subject of this study is the DLR-F4 wing/body transonic model. Specifically, the work conducted herein was in support of the 1st CFD Drag Prediction Workshop, which was held in conjunction with the 19th Applied Aerodynamics Conference in Anaheim, CA during June, 2001. Comprehensive sets of OVERFLOW simulations were independently performed by several users on a variety of computational platforms. CFL3D was used on a limited basis for additional comparison on the same overset mesh. Drag polars based on this database were constructed with a CFD-to-Test correction applied and compared with test data from three facilities. These comparisons show that the predicted drag polars fall inside the scatter band of the test data, at least for pre-buffet conditions. This places the corrected drag levels within 1% of the averaged experimental values. At the design point, the OVERFLOW and CFL3D drag predictions are within 1-2% of each other. In addition, drag-rise characteristics and a boundary of drag-divergence Mach number are presented.

Vassberg, John C.↗