Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methanation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Stable isotopes as tracers of methane dynamics in Everglades marshes with and without active populations of methane oxidizing bacteria

The stable carbon isotopic composition of CH4 is used to study the processes that affect it during transport through plants from sediment to the atmosphere. The enhancement of CH4 flux from Cladium and Eleocharis over the flux from open water or clipped sites indicated that these plants served as gas conduits between the sediments and the atmosphere. Lowering of the water table below the sediment surface caused an Everglades sawgrass marsh to shift from emission of CH4 to consumption of atmospheric CH4. Cladium transported gases passively mainly via molecular diffusion and/or effusion instead of actively via bulk flow. Stable isotropic data gave no evidence that CH4 oxidation was occurring in the rhizosphere of Cladium. Both CH4 stable carbon isotope and flux data indicated a lack of CH4 oxidation at the sediment-water interface in Everglades marl soils and its presence in peat soils where 40 to 92 percent of the flux across the sediment-water interface was oxidized.

Happell, James D.↗

Methane and methane-carbon dioxide activated synergystic biomass gasification for hydrogen rich syngas production

In one aspect, the disclosure relates to methods for biomass gasification to produce sustainable and renewable alternatives to fossil fuels including, but not limited to syngas having a high H2 content. The method can produce an H2/CO ratio close to 2:1, which is desirable for further chemical or transportation fuel synthesis. In another aspect, the methods disclosed herein have high yields and make use of agricultural and industrial waste (e.g., hardwood pellets and grain stovers) as starting materials. In a further aspect, the methods disclosed herein can produce useful byproducts including, but not limited to, carbon nanofibers (CNF). This abstract is intended as a scanning tool for purposes of searching in the particular art and is not intended to be limiting of the present disclosure.

Hu, Jianli↗

Factors that control the stable carbon isotopic composition of methane produced in an anoxic marine sediment

The carbon isotopic composition of methane produced in anoxic marine sediment is controlled by four factors: (1) the pathway of methane formation, (2) the isotopic composition of the methanogenic precursors, (3) the isotope fractionation factors for methane production, and (4) the isotope fractionation associated with methane oxidation. The importance of each factor was evaluated by monitoring stable carbon isotope ratios in methane produced by a sediment microcosm. Methane did not accumulate during the initial 42-day period when sediment contained sulfate, indicating little methane production from 'noncompetitive' substrates. Following sulfate depletion, methane accumulation proceeded in three distinct phases. First, CO2 reduction was the dominant methanogenic pathway and the isotopic composition of the methane produced ranged from -80 to -94 per thousand. The acetate concentration increased during this phase, suggesting that acetoclastic methanogenic bacteria were unable to keep pace with acetate production. Second, acetate fermentation became the dominant methanogenic pathway as bacteria responded to elevated acetate concentrations. The methane produced during this phase was progressively enriched in C-13, reaching a maximum delta(C-13) value of -42 per thousand. Third, the acetate pool experienced a precipitous decline from greater than 5 mM to less than 20 micro-M and methane production was again dominated by CO2 reduction. The delta(C-13) of methane produced during this final phase ranged from -46 to -58 per thousand. Methane oxidation concurrent with methane production was detected throughout the period of methane accumulation, at rates equivalent to 1 to 8 percent of the gross methane production rate. Thus methane oxidation was too slow to have significantly modified the isotopic signature of methane. A comparison of microcosm and field data suggests that similar microbial interactions may control seasonal variability in the isotopic composition of methane emitted from undisturbed Cape Lookout Bight sediment.

Alperin, M. J.↗

Experimental determinations of carbon and hydrogen isotope fractionations and methane clumped isotope compositions associated with ethane pyrolysis from 550 to 600°C

Methane clumped isotope compositions signify the relative natural abundances of rare, doubly substituted isotopic species of methane ( 13 CH 3 D and 12 CH 2 D 2 ) and have emerged as a new isotopic tool to trace the sources, sinks, and lifecycles of methane in the environment. Such measurements can identify equilibration (or reequilibration) temperatures if found to be in isotopic equilibrium or non-equilibrium processes (e.g., kinetically controlled reactions or mixing) if not in isotopic equilibrium. Naturally occurring thermogenic methane—formed by the thermally activated breakdown of larger organic molecules—has been found to have clumped isotope compositions consistent with equilibrium at reasonable gas formation temperatures in some settings and non-equilibrium processes occurring during either formation, migration, storage, or extraction in others. To explore the potential controls on the isotopic composition of thermogenic methane, we conducted isothermal time-series ethane pyrolysis experiments at 550 and 600 °C to measure methane and ethane 13 C/ 12 C and D/H fractionations and methane clumped isotope compositions (resolved 13 CH 3 D and 12 CH 2 D 2 ). We explore the effects of modifying the initial clumped isotope composition of ethane and the addition of water vapor to pyrolysis experiments. We observe that ethane and methane 13 C/ 12 C are controlled by kinetic isotope effects and Rayleigh distillation processes. In contrast, ethane and methane D/H and methane clumped isotope compositions appear to be controlled by a combination of these processes and hydrogen isotope exchange. The hydrogen isotope exchange processes lead to isotopic equilibrium as reaction completion is approached for both D/H (ethane/methane) and methane clumped isotope compositions. Here, we develop a chemical model based on a mass balance approach that accounts for inheritance vs. hydrogen-abstraction formation pathways for singly and doubly substituted isotopologues of ethane and methane that is compared to the experimental data. The model allows the determination of carbon and hydrogen kinetic isotope effects associated with ethane cracking and hydrogen abstraction reactions that, where applicable, we compare to prior theoretical constraints. From the comparison of the model to the experimental data, we infer that the kinetically controlled ethane and methane bulk isotope compositions and methane clumped isotope compositions are controlled by kinetic isotope effects (both primary and secondary) associated with both C–C bond and C–H bond cleavage reactions. Specifically, the methane clumped isotope compositions likely result from a combination of clumped isotope effects associated with ethane breakdown and/or assembly of methane isotopologues (expressed in terms of γ-factor parameters ≠ 1) and combinatorial effects that arise probabilistically. We discuss our experimental results in the context of recent pyrolysis experiments and observations of naturally occurring thermogenic methane. We consider a proposal consistent with observations from nature that the hydrogen isotope exchange reactions that promote equilibration of methane isotopic molecules at or near formation temperature may be facilitated by free radicals generated by pyrolysis reactions. In this framework, isotope exchange effectively ceases when pyrolysis effectively ceases locking in compositions that can be consistent with peak formation temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regulation of Methane Oxidation in a Freshwater Wetland by Water Table Changes and Anoxia

The effects of water table fluctuations and anoxia on methane emission and methane oxidation were studied in a freshwater marsh. Seasonal aerobic methane oxidation rates varied between 15% and 76% of the potential diffusive methane flux (diffusive flux in the absence of aerobic oxidation). On an annual basis, approximately 43% of the methane diffusing into the oxic zone was oxidized before reaching the atmosphere. The highest methane oxidation was observed when the water table was below the peat surface. This was confirmed in laboratory experiments where short-term decreases in water table levels increased methane oxidation but also net methane emission. Although methane emission was generally not observed during the winter, stems of soft rush (Juncus effusus) emitted methane when the marsh was ice covered. Indigenous methanotrophic bacteria from the wetiand studied were relatively anoxia tolerant. Surface peat incubated under anoxic conditions maintained 30% of the initial methane oxidation capacity after 32 days of anoxia. Methanotrophs from anoxic peat initiated aerobic methane oxidation relatively quickly after oxygen addition (1-7 hours). These results were supported by culture experiments with the methanotroph Methylosinus trichosporium OB3b. This organism maintained a greater capacity for aerobic methane oxidation when starved under anoxic compared to oxic conditions. Anoxic incubation of M. trichosporium OB3b in the presence of sulfide (2 mM) and a low redox potential (-110 mV) did not decrease the capacity for methane oxidation relative to anoxic cultures incubated without sulfide. The results suggest that aerobic methane oxidation was a major regulator of seasonal methane emission front the investigated wetland. The observed water table fluctuations affected net methane oxidation presumably due to associated changes in oxygen gradients. However, changes from oxic to anoxic conditions in situ had relatively little effect on survival of the methanotrophic bacteria and thus on methane oxidation potential per se.

Roslev, Peter↗

Exploring a Potentially Significant New(?) Mechanism for Methane Generation on Mars

An unexplored mechanism for methane production on Mars is presented here. Meteor showers have been hypothesized [1] as an explanation for episodic martian methane events [2-7], as the timing of meteor showers consistently correlates with the episodic methane events. The hypothesis [1] relied on production of methane via UV photolysis of extraterrestrial carbonaceous material [8,9] following dissemination of material into the martian atmosphere and onto the surface. Recently, new insights have emerged about an overlooked mechanism for methane production – plasma methanation [10,11] of martian atmospheric CO2 in meteor plasma. This mechanism can generate methane in addition to that produced by the previously explored methods of direct thermal evolution and UV photolysis, adding to the total methane budget produced through meteor infall. It also delivers methane in a rapid manner consistent with past observations of episodic methane “plumes” on Mars, and at altitudes where methane is rapidly removed afterwards. Methane produced by plasma methanation occurs at high altitude, which matches observations made on Mars where measurements collected through the full thickness of the martian atmosphere are of consistently higher methane concentrations (>10 ppbv [2-6]) than those recorded on the surface by the Mars Science Laboratory (MSL) rover (<10 ppbv [7]). High-altitude methane should be detected by the ESA Trace Gas Orbiter (TGO) which has not noted any methane to date. This result is puzzling regardless of the source of methane, but may be explained by the random nature of meteor shower outbursts – a significant infall may simply not have occurred (yet) during the ~3-Earth-year period of TGO observations.

Fries, M.↗

In situ aerobic methane oxidation rates in a stratified lake

Abstract Microbial aerobic methane oxidation is an important sink for aquatic methane worldwide. Despite its importance to global methane fluxes, few aerobic methane oxidation rates have been obtained in freshwater or marine environments without imposing changes to the microbial community through use of ex situ methods. A novel in situ incubation method for continuous time‐series measurements was used in Jordan Lake, North Carolina, during 2020–2021, to determine reaction kinetics for aerobic methane oxidation rates across a wide range of naturally varying methane (55–1833 nM) and dissolved oxygen (DO; 28–366 μM) concentrations and temperatures (17–30°C). Methane oxidation began immediately at the start of each of 21 incubations and methane oxidation rates were 1 st order with respect to methane. The data density allowed for accurate calculation of 1 st ‐order rate constants,k, that ranged from 0.018 to 0.462 h −1 (R 2 > 0.967). Addition of ammonium (20–45 μM) to natural concentrations ranging from 0.057 to 2.4 μM did not change aerobic methane oxidation rate kinetics, suggesting that the natural population of aerobic methane oxidizers in this eutrophic lake was not nitrogen limited. Values ofkinversely correlated most strongly with initial DO concentrations (R 2 = 0.82) rather than temperature. Values forkincreased with Julian day throughout our sampling period, suggesting seasonal influences on methane oxidation via responses to geochemical changes or shifts in microbial community abundance and composition. These experiments demonstrate a high variability in the enzymatic capacity for 1 st ‐order methane oxidation rates in this eutrophic lake that is tightly and inversely coupled to oxygen concentrations. Measurements of in situ aerobic methane oxidation rate constants allow for the direct quantification and modeling of the microbial community's capacity for methane oxidation over a wide range of natural methane concentrations.

Marine & Freshwater Biology↗

[Sources of Methane in the Boreal Region]

In determining the global methane budget the sources of methane must be balanced with the sinks and atmospheric inventory. The approximate contribution of the different methane sources to the budget has been establish showing the major terrestrial inputs as rice, wetlands, bogs, fens, and tundra. Measurements and modeling of production in these sources suggest that temperature, water table height and saturation along with substratum composition are important in controlling methane production and emission. The isotopic budget of 13 C and D/H in methane can be used as a tool to clarify the global budget. This approach has achieved success at constraining the inputs. Studies using the isotopic approach place constraints on global methane production from different sources. Also, the relation between the two biogenic production pathways, acetate fermentation and CO2 reduction, and the effect of substratum composition can be made using isotope measurements shows the relation between the different biogenic, thermogenic and anthropogenic sources of methane as a function of the carbon and hydrogen isotope values for each source and the atmosphere, tropospheric composition. Methane emissions from ponds and fens are a significant source in the methane budget of the boreal region. An initial study in 1993 and 1994 on the isotopic composition of this methane source and the isotopic composition in relation to oxidation of methane at the sediment surface of the ponds or fen was conducted as part of our BOREAS project. The isotopic composition of methane emitted by saturated anoxic sediment is dependent on the sediment composition and geochemistry, but will be influenced by in situ oxidation, in part, a function of rooted plant activity. The influence of oxidation mediated by rooted plant activities on the isotopic composition of methane is not well known and will depend on the plant type, sediment temperature, and numerous other variables. Information on this isotopic composition is important in both understanding the bio-geochemistry of the system and also in determining the regional and global inputs for the methane isotope budget. In determining the destruction of methane for balancing the atmospheric methane budget soil oxidation must be considered.

Source record↗

GES DISC Long-Term Data Analysis Services Using AIRS and CMS Methane Data as an Example

NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) archives and distributes rich collections of data on atmospheric greenhouse gases from multiple satellite missions and model results. Among those greenhouse gases, atmospheric methane is a powerful greenhouse gas contributing ~0.5 (W/m^2) to total radiative forcing, and its concentration has increased by about 150% since 1750. Observations or estimates of methane emissions typically have sparse spatial and temporal coverage. The lack of comprehensive spatial and temporal coverage of methane source and sink observations has made analyzing atmospheric methane trends challenging. In this study the GES DISC aims to provide the community with the resources to better understand changes in atmospheric methane concentrations and the underlying causes. We will utilize methane datasets from Atmospheric Infrared Sounder (AIRS) retrieved methane concentration and three Carbon Monitoring System (CMS) methane emission datasets (in regions of North America, Canada, and Mexico) to compare AIRS methane growth with corresponding CMS regional methane emissions. Comparisons of AIRS methane growth rates and CMS methane emissions suggests wetland emissions may impact methane growth rate trends over North America. As the record for CMS methane data is extended, both datasets can be used in conjunction to better understand impacts on atmospheric methane trends. GES DISCs new anomaly tool can also be used on select datasets to further quantify trends in atmospheric greenhouse gases.

long-term data analysis↗

Investigations of Methane Production in Hypersaline Environments

The recent reports of methane in the atmosphere of Mars, as well as the findings of hypersaline paleo-environments on that planet, have underscored the need to evaluate the importance of biological (as opposed to geological) trace gas production and consumption. Methane in the atmosphere of Mars may be an indication of life but might also be a consequence of geologic activity and/or the thermal alteration of ancient organic matter. Hypersaline environments have now been reported to be extremely likely in several locations in our solar system, including: Mars, Europa, and Enceladus. Modern hypersaline microbial mat communities, (thought to be analogous to those present on the early Earth at a period of time when Mars was experiencing very similar environmental conditions), have been shown to produce methane. However, very little is known about the physical and/or biological controls imposed upon the rates at which methane, and other important trace gases, are produced and consumed in these environments. We describe here the results of our investigations of methane production in hypersaline environments, including field sites in Chile, Baja California Mexico, California, USA and the United Arab Emirates. We have measured high concentrations of methane in bubbles of gas produced both in the sediments underlying microbial mats, as well as in areas not colonized by microbial mats in the Guerrero Negro hypersaline ecosystem, Baja California Mexico, in Chile, and in salt ponds on the San Francisco Bay. The carbon isotopic (δ13C) composition of the methane in the bubbles exhibited an extremely wide range of values, (ca. -75 per mille ca. -25 per mille). The hydrogen isotopic composition of the methane (δ2H) ranged from -60 to -30per mille and -450 to -350per mille. These isotopic values are outside of the range of values normally considered to be biogenic, however incubations of the sediments in contact with these gas bubbles reveals that the methane is indeed being produced by these sediments. Substrate limitation of methanogenesis in these environments, and not methane oxidation, would explain the isotopic values of the methane in these environments. Incubations with both isotopically labeled and unlabeled putative substrates for methanogenesis have shown that the substrates most important for methanogenesis in these environments are the so-called non-competitive substrates, e.g., methylamines, dimethylsulfide, and methanol. Acetate and bicarbonate appear not to be important substrates for methanogens in these environments. Extraction of DNA and analysis of a gene used for methane production (mcrA) has revealed that the community composition of methanogens is consistent with organisms known to use non-competitive substrates. Our work has shown that hypersaline environments have the potential to both produce and preserve methane for analysis, e.g., by capable rovers. Our work expends the range of methane isotopic values now known to be produced by active methanogenesis

hypersaline paleo-environments↗

Cryptic Methane-Cycling by Methanogens During Multi-Year Incubation of Estuarine Sediment

As marine sediments are buried, microbial communities transition from sulfate-reduction to methane-production after sulfate is depleted. When this biogenic methane diffuses into the overlying sulfate-rich sediments, it forms a sulfate-methane transition zone (SMTZ) because sulfate reducers deplete hydrogen concentrations and make hydrogenotrophic methanogenesis exergonic in the reverse direction, a process called the anaerobic oxidation of methane (AOM). Microbial participation in these processes is often inferred from geochemistry, genes, and gene expression changes with sediment depth, using sedimentation rates to convert depth to time. Less is known about how natural sediments transition through these geochemical states transition in real-time. We examined 16S rRNA gene amplicon libraries and metatranscriptomes in microcosms of anoxic sediment from the White Oak River estuary, NC, with three destructively sampled replicates with methane added (586-day incubations) and three re-sampled un-amended replicates (895-day incubations). Sulfate dropped to a low value (∼0.3 mM) on similar days for both experiments (312 and 320 days, respectively), followed by a peak in hydrogen, intermittent increases in methane-cycling archaea starting on days 375 and 362 (mostly Methanolinea spp. and Methanosaeta spp., and Methanococcoides sp. ANME-3), and a methane peak 1 month later. However, methane δ 13 C values only show net methanogenesis 6 months after methane-cycling archaea increase and 4 months after the methane peak, when sulfate is consistently below 0.1 mM and hydrogen increases to a stable 0.61 ± 0.13 nM (days 553–586, n = 9). Sulfate-reducing bacteria (mostly Desulfatiglans spp. and Desulfosarcina sp. SEEP-SRB1) increase in relative abundance only during this period of net methane production, suggesting syntrophy with methanogens in the absence of sulfate. The transition from sulfate reduction to methane production in marine sediments occurs through a prolonged period of methane-cycling by methanogens at low sulfate concentrations, and steady growth of sulfate reducers along with methanogens after sulfate is depleted.

59 BASIC BIOLOGICAL SCIENCES↗

Addressing Low-Cost Methane Sensor Calibration Shortcomings with Machine Learning

Quantifying methane emissions is essential for meeting near-term climate goals and is typically carried out using methane concentrations measured downwind of the source. One major source of methane that is important to observe and promptly remediate is fugitive emissions from oil and gas production sites but installing methane sensors at the thousands of sites within a production basin is expensive. In recent years, relatively inexpensive metal oxide sensors have been used to measure methane concentrations at production sites. Current methods used to calibrate metal oxide sensors have been shown to have significant shortcomings, resulting in limited confidence in methane concentrations generated by these sensors. To address this, we investigate using machine learning (ML) to generate a model that converts metal oxide sensor output to methane mixing ratios. To generate test data, two metal oxide sensors, TGS2600 and TGS2611, were collocated with a trace methane analyzer downwind of controlled methane releases. Over the duration of the measurements, the trace gas analyzer’s average methane mixing ratio was 2.40 ppm with a maximum of 147.6 ppm. The average calculated methane mixing ratios for the TGS2600 and TGS2611 using the ML algorithm were 2.42 ppm and 2.40 ppm, with maximum values of 117.5 ppm and 106.3 ppm, respectively. A comparison of histograms generated using the analyzer and metal oxide sensors mixing ratios shows overlap coefficients of 0.95 and 0.94 for the TGS2600 and TGS2611, respectively. Overall, our results showed there was a good agreement between the ML-derived metal oxide sensors’ mixing ratios and those generated using the more accurate trace gas analyzer. This suggests that the response of lower-cost sensors calibrated using ML could be used to generate mixing ratios with precision and accuracy comparable to higher priced trace methane analyzers. This would improve confidence in low-cost sensors’ response, reduce the cost of sensor deployment, and allow for timely and accurate tracking of methane emissions.

03 NATURAL GAS↗