Search NASA⌕ Search

SEARCH · Search NASA

Results for “Method of characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effects of chemical composition and physicochemical properties of poplar biomass on the performance of 3D printed poplar-reinforced PLA materials

Lignocellulosic biomass has been well-acknowledged as a filler for making 3D printed composites. The technical performances of composites were influenced by the characteristics of the components. The correlations between poplar biomass properties and the mechanical and thermal performances of the 3D printed poplar-plastic composites were investigated. The characteristics of poplar were modified by different pretreatment methods, including using hot water, dilute acid, and organic solvent (organosolv), and each treated poplar biomass was applied as a filler in a polylactic acid (PLA) polymer matrix to produce eco-friendly materials. These solvent pretreatments increased the hydrophobicity and surface area of poplar. Organosolv treated poplar showed the highest cellulose content and significantly increased Young's modulus of its biocomposites. Principal component analysis revealed that the specific surface area and water contact angle of biomass contributed to the thermal stability of biocomposites. Additionally, the degree of polymerization of cellulose and xylan content within the biomass correlated with the biocomposites' break stress. Notably, the crystallinity of biocomposites impacted the modulus of these materials. The reported relationships between biomass characteristics and 3D printed composite behaviors provide guidance for optimizing biomass processing in biocomposite applications.

Ji, Anqi [State Univ. of New York (SUNY), Syracuse↗
DOE OSTI2024

Investigation of inter-subject variation in ultrafine particle deposition across human nasal airways: A study involving children, adults, and the elderly

Occupational and environmental exposure to toxic nanoparticles, driven by the rapid expansion of nanotechnology, raises significant respiratory health concern. Numerous studies have explored airflow and particle dynamics in adult nasal airways, but understanding the impact of age-related anatomical changes in children and the elderly remains limited. This study systematically investigates age-related anatomical variations and associated influence on nasal airflow dynamics and ultrafine particle deposition characteristics. Using Computational Fluid-Particle Dynamics (CFPD) method, simulation was conducted under diverse inhalation conditions spanning a wide age range, including: two children (5 years old), two young adults (in their twenties), and two elderly (over 77 years old). Our results reveal distinctive variations across age groups in anatomical dimensions, which affect distribution of wall shear stress where the elderly and children display unique patterns distinct from the young adults. While total deposition efficiency differs significantly between children and adults, filtration efficiency in the subregion with most deposition, main respiratory, remains consistent. However, inter-subject differences are observed in the vestibular and olfactory regions,emphasizing nuanced impact of age-related anatomical variations. Overall and subregional empirical equations for deposition efficiency were developed by incorporating the combined diffusion parameter, Sc a Δ b , corroborating the use of geometrical characteristic parameters for each specific subject in predicting nasal deposition efficiency across age groups. Our findings contribute to predictive nanoparticle exposure analysis in nasal airways across different age groups, thereby enhancing respiratory healthcare for individuals across the life span.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Experimental Analysis of Distribution Network Voltage Regulation Using Smart Inverters

Smart inverters (SIs) have demonstrated their potential to provide grid services for both transmission and distribution systems. One of these grid services, distribution network voltage regulation by SIs, has the potential to improve network voltage regulation through controlling the reactive and active power output of the SIs. Voltage regulation by SIs will be distributed and might be better suited to controlling local conditions to complement traditional voltage-regulating assets, e.g., tap-changing transformers, capacitor banks, and line voltage regulators. There is a gap in the literature on comparing the SI response characteristics when the SIs are controlled by a local controller or external control signals. This paper presents an experimental study to characterize SI reactive power regulation responses to two different control methods: autonomous control and remote dispatch. We found that SI reactive power regulation responses exhibit important differences between these methods in terms of delays and ramp rate. Finally, power-hardware-in-the-loop (PHIL) tests were conducted to evaluate the performance of these two methods. The PHIL test results show that the SI response characteristics for autonomous control and remote dispatch need to be considered when planning for distribution network voltage regulation using SIs.

autonomous control↗
DOE OSTI2025

Distribution Feeder Characteristics and Their Resiliency to Natural Hazards

This paper introduces a method and approach for initially screening actions to improve the reliability of distribution systems exposed to three natural hazards (wildlife, weather, and vegetation). The method is well-suited to needs and capabilities of smaller utilities because it relies on readily available information and does not depend on simulations involving detailed engineering models. The method involves first aggregating feeders into like types and then correlating them, separately by hazard, to standard measures of reliability, namely, System Average Interruption Frequency Index (SAIFI) and System Average Interruption Duration Index (SAIDI), and the individual constituents of these measures. The correlations provide both new insights into the efficacy of accepted reliability management practices while and re-confirm long-understood, accepted practices. Importantly, the method does not seek to replace the need for detailed engineering analysis. Instead, in view of the significant costs involved in conducting these more involved analyses, the method is intended to help smaller utilities prioritize their more limited resources to maximize the efficacy of actions they take to improve reliability.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Robust Spectral Anomaly Detection in EELS Spectral Images via 3D Convolutional Variational Autoencoders

Abstract A 3D Convolutional Variational Autoencoder (3D‐CVAE) is introduced for automated anomaly detection in electron energy‐loss spectroscopy spectrum imaging (EELS‐SI) data. This approach leverages the full 3D structure of EELS‐SI data to detect subtle spectral anomalies while preserving both spatial and spectral correlations across the datacube. By employing cross‐entropy loss and training on bulk spectra, the model learns to reconstruct bulk features characteristic of the defect‐free material. In exploring methods for anomaly detection, both the 3D‐CVAE approach and principal component analysis (PCA) are evaluated, testing their performance using FeL‐edge ΔEpeak shifts designed to simulate material defects. These results show that 3D‐CVAE achieves superior anomaly detection and maintains consistent performance across various shift magnitudes. The method demonstrates clear bimodal separation between bulk and anomalous spectra, enabling reliable classification. Further analysis verifies that lower‐dimensional representations are robust to anomalies in the data. While performance advantages over PCA diminish with decreasing anomaly concentration, our method maintains high reconstruction quality even in challenging, noise‐dominated spectral regions. This approach provides a robust framework for unsupervised automated detection of spectral anomalies in EELS‐SI data, particularly valuable for analyzing complex material systems.

Chemistry↗
DOE OSTI2026

Evaluation of a deuterated detector for gamma-ray beam intensity measurements

Laser-Compton scattering sources of quasi-monochromatic γ-ray beams have been in operation for over 30 years, with new facilities being under construction or proposed. To sustain a high-quality experimental physics program, continuous monitoring of these beams is essential by measuring the spectral, temporal, and spatial characteristics. In this work, we introduce a new method for determining the γ-ray beam intensity by using photodisintegration of deuterons in an active target detector approach. Measurements were performed using deuterated liquid scintillator detectors at several incident gamma energies between 4 and 13 MeV at the High Intensity γ-ray Source, Durham, USA. The results demonstrate that an instrument based on a deuterated active detector can be used to monitor the intensity of the γ-ray beam with high efficiency and operational simplicity.

Compton scattering↗
DOE OSTI2024

Measuring the Moisture Content of Wood Sheathing with Continuous Wave Radars

Radars were studied for measuring the moisture content of wood-based materials because of their non-destructive nature and their ability to measure the moisture content of several layers at once. These convenient characteristics enable a quick and non-invasive method to find areas of high moisture content in building envelopes so that problems can be fixed before the structure degrades. The need to operate the radar at millimeter ranges required the development of new techniques and methods for analyzing and calculating the moisture content of individual layers of building material. The techniques are providing accurate results for oriented strand board, and efforts are continuing for investigating other construction materials, meeting FCC requirements, and building a system that will be easy to deploy.

Killough, Stephen M↗
DOE OSTI2025

A Stable and Ultrafast Control for Multiparallel Grid-Tied SiC Inverters With LVRT Capability Considering Cable Impedance

The stability of multiparalleled grid-tied inverters remains a challenging issue especially during low-voltage ride-through (LVRT) in the presence of grid impedance. SiC device-based grid-tied inverters can achieve advantages such as higher efficiency, reduced size of interface filters, and fast dynamics; however, they can exacerbate this stability issue particularly when LVRT occurs along with high inrush current due to their low inertia characteristics. In this article, a direct deadbeat control method without any PI control loop is proposed for multiparallel grid-tied SiC inverters. The proposed control achieves instantaneous current regulations within switching cycles. In addition, it mitigates high inrush currents and maintains stability during LVRT transients without requiring mode transitions between normal and LVRT operation modes, thereby achieving an ultrafast response and seamless operation through this unified control method. The Lyapunov method is applied to analyze the multiparallel inverter stability in the presence of grid impedance with proposed deadbeat control method. The inverter V-I trajectories during LVRT transients are derived to illustrate the ultrafast and stable feature of proposed control. Finally, the experimental results of two grid-tied SiC inverters operating at LVRT transients are provided to verify the advantages of the proposed control method.

14 SOLAR ENERGY↗
DOE OSTI2026

NCCS High Performance GMRES Mixed Precision

HPG-MxP is a software package that performs a fixed number of multigrid preconditioned (using a Gauss-Seidel smoother) Generalized minimal residual (PGMRES) iterations in order to solve a possibly nonsymmetric large sparse linear system of equations. It is designed to be a benchmark to measure a computer's performance for sparse linear algebra workloads typical in scientific computing while allowing the use of mixed precision methods. The solution is required to have convergence characteristics and accuracy similar to double precision GMRES. It is based on the High Performance Conjugate Gradient Benchmark (HPCG) which restricts all implementations to use only the IEEE double precision format (FP64). The original implementation (https://github.com/hpg-mxp/hpg-mxp) was written by Ichitaro Yamazaki, Jennifer Loe, Christian Glusa, Sivasankaran Rajamanickam, Piotr Luszczek, and Jack Dongarra. Please refer to that repository for documentation on the original implementation. This version is maintained by the National Center for Computational Sciences at Oak Ridge National Laboratory. It is highly scalable and optimized for Oak Ridge Leadership Computing Facility (OLCF) systems, particularly Frontier.

Kashi, Aditya [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2024

Development of prechamber enabled mixing-controlled combustion strategy for ultra-low methane emissions from lean burn natural gas engines

This numerical study explores the optimization of Prechamber Enabled Mixing-Controlled Combustion (PC-MCC) using natural gas in heavy-duty engines, aiming to enhance combustion efficiency to minimize methane slip and NOx emissions. The approach involves a prechamber ignition system, distinct from conventional spark ignition (SI) systems, to initiate combustion of direct injected natural gas. By leveraging the robust ignition characteristics of the prechamber, the PC-MCC method demonstrates significant potential in achieving efficient combustion akin to diesel engines but with lower greenhouse gas emissions. The research evaluates the effects of various geometric and operational parameters on the combustion process and emissions, including prechamber volume, nozzle diameter, direct injector (DI) geometry, and engine operating strategies. Computational Fluid Dynamics (CFD) simulations are utilized, focusing on a heavy-duty, single-cylinder engine modeled after the Caterpillar C9.3B engine. Key findings indicate that a prechamber volume of 3 cc, coupled with a nozzle diameter of 2.75 mm for two prechamber holes, strikes an optimal balance between combustion efficiency and emissions reduction. This configuration ensures robust combustion across a range of operating conditions while maintaining methane slip within targeted limits. Further investigation into DI geometry shows the significance of the injector umbrella angle and nozzle diameter in shaping the fuel-air mixing and combustion dynamics. An umbrella angle of 130° and a nozzle diameter of 300 microns are identified as optimal, promoting rapid and efficient combustion with minimized methane and NOx emissions. The study also investigates the impact of injection timing and pressure, highlighting their roles in controlling combustion timing and influencing emissions levels. Advanced injection timing is found to be crucial in achieving the desired low methane slip, whereas retarded injection timing assists to reduce NOx emissions while having a slight increase in methane emissions. Operating strategies incorporating various levels of Exhaust Gas Recirculation (EGR) are assessed for their effectiveness in further reducing emissions. The research demonstrates that a judicious combination of internal hot EGR and careful calibration of DI pressure and SOI timing can achieve significant reductions in NOx emissions while keeping methane slip under control. Specifically, an internal EGR level of 15%–25%, combined with DI pressures of 200–300 bar and injection timings at or after top dead center, is recommended. These findings contribute valuable insights into the development of advanced combustion techniques for natural gas engines, offering a viable pathway to reduce methane slip without compromising engine efficiency or performance. The PC-MCC system presents a promising solution for the future of heavy-duty natural gas engine technology to reduce methane emissions.

Nsaif, Osama↗
DOE OSTI2025

Porous carbon from lignocellulosic biomass with emphasis on corn plant waste residue for energy storage

The rising global demand for sustainable energy storage materials has driven the search for environmentally friendly and cost-effective electrode options. Hydrothermal conversion of lignocellulosic biomass has gained attention due to its low energy requirements and operation at relatively low temperatures, presenting a green alternative to traditional thermochemical methods. The resulting solid product, hydrochar, has been used as an adsorbent and soil amendment; however, chemical/thermal treatment significantly enhances its physical properties. These structural modifications transform hydrochar into an effective porous carbon electrode, offering abundant sites for electrolyte ion transport, critical for high-performance devices like supercapacitors and batteries. This review first discusses various waste biomass and sustainable feedstocks available globally. It compares two primary thermochemical conversion techniques, pyrolysis and hydrothermal carbonization/liquefaction, and examines their respective solid products, biochar and hydrochar, analyzing differences in their physical and chemical characteristics. The focus is placed on hydrochar, summarizing activation methods to produce porous carbon suitable for energy storage applications. Additionally, this review will include a dedicated section on the application of porous carbon derived from corn plant waste residue, considering that corn is one of the most abundant crops grown worldwide, which makes it an important and promising source for sustainable porous carbon production. The role of machine learning models in optimizing hydrothermal processes to produce high-quality hydrochar is also discussed, emphasizing how data-driven approaches can streamline process development. Finally, the review identifies the current challenges and prospects for lignocellulosic biomass-derived porous carbon as a sustainable electrode material in next-generation energy storage technologies.

25 ENERGY STORAGE↗
DOE OSTI2025

InterGraph-CPS: A Graph-Theoretic Approach to Characterize Cross-Domain Cyber-Physical Interdependencies and Uncertainties in Electric Grid Systems for Improved Decision-Making in Operation and Response

Critical infrastructure systems such as the electric grid are increasingly cyber-physical; yet, despite the cyber-physical characteristics of critical infrastructure systems, the physical process system and communication/control network system are traditionally analyzed in siloes. As these systems become more cyber-physical, it is crucial that models and methods are available to assess the cyber physical system (CPS) interdependencies, characteristics, and event propagation for improved planning, operation, and response. Thus, we proposed an integrated structural and temporal CPS interdependency analysis framework, InterGraph-CPS, that provides insight into the CPS function during normal operation as well as disturbances. This integrated structural and temporal interdependency framework is uniquely designed for assessing CPSs by account for the challenges of analyzing cyber and physical data streams together due to data availability, data type, and time scale differences. By leveraging both structural (e.g., graph analysis) and temporal (e.g., data analytics) techniques, different CPS behaviors and configurations can be accounted for.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Unrolled Video Super-Resolution Network with Autoregressive Prior for the Case of Known Motion

Real-time detection and classification of distant objects is necessary for many national security applications. However, when objects are far from the sensor, they occupy only a small number of pixels in the captured video, limiting the amount of visual detail available for recognition. State-of-the-art classification methods typically rely on high-resolution (HR) video streams to capture characteristic object features, but obtaining such detail is challenging for distant objects that occupy only a few pixels. This motivates the development of video super-resolution (VSR) methods that enhance object classification by recovering fine details from low-pixel representations. Current VSR methods rely either on model-based optimization, which is interpretable but computationally expensive, or on learning-based approaches, which are efficient and high-performing but often lack flexibility and interpretability. In this report, we propose an end-to-end trainable unrolled VSR network, UVSRNet, which super-resolves each frame in a video by exploiting sub-pixel motion between neighboring low-resolution (LR) frames as well as incorporating high-frequency detail from previously super-resolved frames. In particular, by unrolling a plug-and-play (PnP) half-quadratic splitting (HQS) algorithm, we leverage a model-based data-fitting module alongside a learning-based autoregressive prior module. This combination yields a method that maintains the flexibility and interpretability of model-based methods while achieving the performance advantages of learning-based methods.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

femto-PIXAR: a self-supervised neural network method for reconstructing femtosecond X-ray free electron laser pulses

X-ray Free Electron Lasers (X-FELs) operate in a wide range of lasing configurations for a broad variety of scientific applications at ultrafast time-scales such as structural biology, materials science, and atomic and molecular physics. Shot-by-shot characterization of the X-FEL pulses is crucial for analysis of many experiments as well as tuning the X-FEL performance. However, for the weak pulses found in advanced configurations, e.g. those needed for coherent, two-pulse studies of quantum materials, there is no current method for reliably resolving pulse profiles. Here we show that a physics-based U-net model can reconstruct the individual pulse power profiles for sub-picosecond pulse separation without the need for simulations. Using experimental data from weak X-FEL pulse pairs, we demonstrate we can learn the pulse characteristics on a shot-by-shot basis when conventional methods fail.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Machine Learning Classification Strategy to Improve Streamflow Estimates in Diverse River Basins in the Colorado River Basin

Streamflow in the Colorado River Basin (CRB) is significantly altered by human activities including land use/cover alterations, reservoir operation, irrigation, and water exports. Climate is also highly varied across the CRB which contains snowpack-dominated watersheds and arid, precipitation-dominated basins. Recently, machine learning methods have improved the generalizability and accuracy of streamflow models. Previous successes with LSTM modeling have primarily focused on unimpacted basins, and few studies have included human impacted systems in either regional or single-basin modeling. We demonstrate that the diverse hydrological behavior of river basins in the CRB are too difficult to model with a single, regional model. We propose a method to delineate catchments into categories based on the level of predictability, hydrological characteristics, and the level of human influence. Lastly, we model streamflow in each category with climate and anthropogenic proxy data sets and use feature importance methods to assess whether model performance improves with additional relevant data. Overall, land use cover data at a low temporal resolution was not sufficient to capture the irregular patterns of reservoir releases, demonstrating the importance of having high-resolution reservoir release data sets at a global scale. On the other hand, the classification approach reduced the complexity of the data and has the potential to improve streamflow forecasts in human-altered regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Frequency Domain Methodology for Quantitative Evaluation of Diffuse Wavefield With Applications to Seismic Imaging

Abstract Ambient Noise Imaging (ANI) of subsurface structures relies on seismic interferometry of diffuse seismic wavefields. However, the lack of effective methods to quantify and identify highly diffuse waves hampers applications of ANI, particularly in evaluating seismic attenuation and monitoring structural changes with high temporal resolution. Conventional ANI approaches require data normalization, which effectively suppresses the non‐diffuse component with large amplitude but also results in significant loss of amplitude and phase information in the continuous seismic records. In this study, we propose a frequency domain method to quantitatively evaluate the degree of diffuseness of seismic wavefields by analyzing their statistical characteristics of modal amplitudes for stationarity and randomness. Tests on synthetic waveform and field nodal records show that the proposed method can effectively distinguish between diffuse and non‐diffuse waveforms for either single‐ or three‐component data. As an application, we identify a 60‐s‐long diffuse coda of a local M 2.2 earthquake recorded by a dense nodal array on the San Jacinto Fault Zone, and successfully extract high‐quality dispersion curve andQ‐value without performing data normalization. These results are consistent with those obtained by conventional methods that assess the correlation between coherency and the Green's function, and by modeling ballistic waves generated by road traffic. Our proposed method can advance the imaging of subsurface velocity and attenuation structures as well as monitoring temporal changes for scientific studies and engineering applications.

Geochemistry & Geophysics↗
DOE OSTI2024

Quantification of Native Lignin Structural Features with Gel–Phase 2D–HSQC 0 Reveals Lignin Structural Changes During Extraction

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantification of Native Lignin Structural Features with Gel–Phase 2D–HSQC 0 Reveals Lignin Structural Changes During Extraction

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.

09 BIOMASS FUELS↗