Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixing layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Irreversible Entropy Production in Two-Phase Mixing Layers

This report presents a study of dissipation (irreversible production of entropy) in three-dimensional, temporal mixing layers laden with evaporating liquid drops. The purpose of the study is to examine the effects of evaporating drops on the development of turbulent features in flows. Direct numerical simulations were performed to analyze transitional states of three mixing layers: one without drops, and two that included drops at different initial mass loadings. Without drops, the dissipation is essentially due to viscous effects. It was found that in the presence of drops, the largest contribution to dissipation was made by heating and evaporation of the drops, and that at large length scales, this contribution is positive (signifying that the drops reduce turbulence), while at small scales, this contribution is negative (the drops increase turbulence). The second largest contribution to dissipation was found to be associated with the chemical potential, which leads to an increase in turbulence at large scales and a decrease in turbulence at small scales. The next smaller contribution was found to be that of viscosity. The fact that viscosity effects are only third in order of magnitude in the dissipation is in sharp contrast to the situation for the mixing layer without the drops. The next smaller contribution - that of the drag and momentum of the vapor from the drops - was found to be negative at lower mass loading but to become positive at higher mass loading.

Okongo, Nora↗
NASA NTRS1992

The three-dimensional evolution of a plane mixing layer - The Kelvin-Helmholtz rollup

The hydrodynamic evolution of an incompressible plane mixing layer is addressed to elucidate scalar mixing in free shear flows. A detailed description of the onset of three-dimensionality in a mixing layer before or in the absence of pairing is presented. Various simulations were performed to investigate the sensitivity of these results to variations in initial conditions. These variations included changes in amplitude, wavelength, functional form, and relative phasing of the initial low-wavenumber disturbances. Pierrehumber and Widnall's (1982) translative instability eigenfunctions are found to include rib vortices in the braid region and oppositely signed streamwise vorticity in the roller core. The translative instability is an instability of the late-time oversaturated flow. Three-dimensional perturbation growth similar to that of the translative instability can occur whenever spanwise vorticity is present in the braid region. The nonlinear effects that occur when the initial rib circulation is sufficiently high are discussed.

Rogers, Michael M.↗
NASA NTRS1992

Sensitivity of the structure of untripped mixing layers to small changes in initial conditions

An experimental study was conducted concerning the influence of small changes in initial conditions on the near- and far-field evolution of the three-dimensional structure of a plan mixing layer. A two-stream mixing layer with a velocity ratio of 0.6 was generated with the initial boundary layers on the splitter plate laminar and was nominally two-dimensional. The initial conditions were changed slightly by interchanging the high- and low-speed sides of the wind tunnel, while maintaining the same velocities, and hence velocity ratio. This resulted in small changes in the initial boundary layer properties, and the perturbations present in the boundary layers were interchanged between the high- and low-speed sides for the two cases. The results indicate that, even with this relatively minor change in initial conditions, the near-field regions of the two cases differ significantly. The peak Reynolds stress levels in the near-field differ by up to 100 percent, and this is attributed to a difference in the location of the initial spanwise vortex roll-up. In addition, the positions and shapes of the individual streamwise vortical structures differ for the two cases, although the overall structures differ for the two cases, although the overall qualitative description of these structures is comparable. The subsequent reorganization and decay of the streamwise vortical structures is very similar for the two cases. As a result, in the far field, both mixing layers achieve similar structure, yielding comparable growth rates, Reynolds stress, distribution, and spectral content.

Plesniak, M. W.↗
NASA NTRS1990

An experimental study of secondary vortex structure in mixing layers

This report covers the first eight months of an experimental research project on the secondary vortex structure in plane mixing layers. The aim of the project is to obtain quantitative data on the behavior of the secondary structure in a turbulent mixing layer at reasonable reynolds numbers (Re(sub delta(sub w)) approx. 50,000). In particular, we hope to resolve the questions of how the scale of the secondary vortex structure changes with the scale of the mixing layer, and whether the structures are fixed in space, or whether they 'meander' in the spanwise direction.

Bell, J. H.↗
NASA NTRS2001

Development of a Hybrid RANS/LES Method for Turbulent Mixing Layers

Significant research has been underway for several years in NASA Glenn Research Center's nozzle branch to develop advanced computational methods for simulating turbulent flows in exhaust nozzles. The primary efforts of this research have concentrated on improving our ability to calculate the turbulent mixing layers that dominate flows both in the exhaust systems of modern-day aircraft and in those of hypersonic vehicles under development. As part of these efforts, a hybrid numerical method was recently developed to simulate such turbulent mixing layers. The method developed here is intended for configurations in which a dominant structural feature provides an unsteady mechanism to drive the turbulent development in the mixing layer. Interest in Large Eddy Simulation (LES) methods have increased in recent years, but applying an LES method to calculate the wide range of turbulent scales from small eddies in the wall-bounded regions to large eddies in the mixing region is not yet possible with current computers. As a result, the hybrid method developed here uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall-bounded regions entering a mixing section and uses a LES procedure to calculate the mixing-dominated regions. A numerical technique was developed to enable the use of the hybrid RANS-LES method on stretched, non-Cartesian grids. With this technique, closure for the RANS equations is obtained by using the Cebeci-Smith algebraic turbulence model in conjunction with the wall-function approach of Ota and Goldberg. The LES equations are closed using the Smagorinsky subgrid scale model. Although the function of the Cebeci-Smith model to replace all of the turbulent stresses is quite different from that of the Smagorinsky subgrid model, which only replaces the small subgrid turbulent stresses, both are eddy viscosity models and both are derived at least in part from mixing-length theory. The similar formulation of these two models enables the RANS and LES equations to be solved with a single solution scheme and computational grid. The hybrid RANS-LES method has been applied to a benchmark compressible mixing layer experiment in which two isolated supersonic streams, separated by a splitter plate, provide the flows to a constant-area mixing section. Although the configuration is largely two dimensional in nature, three-dimensional calculations were found to be necessary to enable disturbances to develop in three spatial directions and to transition to turbulence. The flow in the initial part of the mixing section consists of a periodic vortex shedding downstream of the splitter plate trailing edge. This organized vortex shedding then rapidly transitions to a turbulent structure, which is very similar to the flow development observed in the experiments. Although the qualitative nature of the large-scale turbulent development in the entire mixing section is captured well by the LES part of the current hybrid method, further efforts are planned to directly calculate a greater portion of the turbulence spectrum and to limit the subgrid scale modeling to only the very small scales. This will be accomplished by the use of higher accuracy solution schemes and more powerful computers, measured both in speed and memory capabilities.

Georgiadis, Nicholas J.↗
NASA NTRS1996

The structure of variable property, compressible mixing layers in binary gas mixtures

We present the results of a study of the structure of a parallel compressible mixing layer in a binary mixture of gases. The gases included in this study are hydrogen (H2), helium (He), nitrogen (N2), oxygen (02), neon (Ne) and argon (Ar). Profiles of the variation of the Lewis and Prandtl numbers across the mixing layer for all thirty combinations of gases are given. It is shown that the Lewis number can vary by as much as a factor of eight and the Prandtl number by a factor of two across the mixing layer. Thus assuming constant values for the Lewis and Prandtl numbers of a binary gas mixture in the shear layer, as is done in many theoretical studies, is a poor approximation. We also present profiles of the velocity, mass fraction, temperature and density for representative binary gas mixtures at zero and supersonic Mach numbers. We show that the shape of these profiles is strongly dependent on which gases are in the mixture as well as on whether the denser gas is in the fast stream or the slow stream.

Kozusko, F.↗
NASA NTRS2011

Comparison of Four Mixed Layer Mesoscale Parameterizations and the Equation for an Arbitrary Tracer

In this paper we discuss two issues, the inter-comparison of four mixed layer mesoscale parameterizations and the search for the eddy induced velocity for an arbitrary tracer. It must be stressed that our analysis is limited to mixed layer mesoscales since we do not treat sub-mesoscales and small turbulent mixing. As for the first item, since three of the four parameterizations are expressed in terms of a stream function and a residual flux of the RMT formalism (residual mean theory), while the fourth is expressed in terms of vertical and horizontal fluxes, we needed a formalism to connect the two formulations. The standard RMT representation developed for the deep ocean cannot be extended to the mixed layer since its stream function does not vanish at the ocean's surface. We develop a new RMT representation that satisfies the surface boundary condition. As for the general form of the eddy induced velocity for an arbitrary tracer, thus far, it has been assumed that there is only the one that originates from the curl of the stream function. This is because it was assumed that the tracer residual flux is purely diffusive. On the other hand, we show that in the case of an arbitrary tracer, the residual flux has also a skew component that gives rise to an additional bolus velocity. Therefore, instead of only one bolus velocity, there are now two, one coming from the curl of the stream function and other from the skew part of the residual flux. In the buoyancy case, only one bolus velocity contributes to the mean buoyancy equation since the residual flux is indeed only diffusive.

Canuto, V. M.↗
NASA NTRS1989

Design and calibration of the mixing layer and wind tunnel

A detailed account of the design, assembly and calibration of a wind tunnel specifically designed for free-shear layer research is contained. The construction of this new facility was motivated by a strong interest in the study of plane mixing layers with varying initial and operating conditions. The Mixing Layer Wind tunnel is located in the Fluid Mechanics Laboratory at NASA Ames Research Center. The tunnel consists of two separate legs which are driven independently by centrifugal blowers connected to variable speed motors. The blower/motor combinations are sized such that one is smaller than the other, giving maximum flow speeds of about 20 and 40 m/s, respectively. The blower speeds can either be set manually or via the Microvax II computer. The two streams are allowed to merge in the test section at the sharp trailing edge of a slowly tapering splitter plate. The test section is 36 cm in the cross-stream direction, 91 cm in the spanwise direction and 366 cm in length. One test section side-wall is slotted for probe access and adjustable so that the streamwise pressure gradient may be controlled. The wind tunnel is also equipped with a computer controlled, three-dimensional traversing system which is used to investigate the flow fields with pressure and hot-wire instrumentation. The wind tunnel calibration results show that the mean flow in the test section is uniform to within plus or minus 0.25 pct and the flow angularity is less than 0.25 deg. The total streamwise free-stream turbulence intensity level is approximately 0.15 pct. Currently the wind tunnel is being used in experiments designed to study the three-dimensional structure of plane mixing layers and wakes.

Bell, James H.↗
NASA NTRS1997

Structure of the Compressible Reacting Mixing Layer: A Linear Stability Analysis

Previous investigations have demonstrated that a mixing layer in compressible reacting conditions can develop two instability modes in addition to the more common central mode, which exists unaccompanied in incompressible non-reacting flows. These 'outer' modes were shown in the investigations of Planche and Reynolds to have a detrimental effect on mixing and combustion efficiency and therefore their presence has important consequences for applications of supersonic combustion. Results from a parametric study of the compressible reacting mixing layer's regime space using a linear stability technique will be discussed. The purpose is to develop a more complete understanding behind the effects of compressibility, heat release and the density, equivalence and velocity ratios on the amplification rate and structure of each instability mode.

Day, M. J.↗
NASA NTRS1990

Numerical simulations of compressible mixing layers

Direct numerical simulations of two-dimensional temporally growing compressible mixing layers are presented. The Kelvin-Helmholtz instability is initially excited by a white-noise perturbation superimposed onto a hyperbolic tangent meanflow profile. The linear regime is studied at low resolution in the case of two flows of equal temperatures, for convective Mach numbers from 0.1 to 1 and for different values of the Reynolds number. At higher resolution, the complete evolution of a two-eddy mixing layer between two flows of different temperatures is simulated at moderate Reynolds number. Similarities and differences between flows of equal convective Mach numbers are discussed.

Normand, Xavier↗
NASA NTRS1996

The stability of compressible mixing layers in binary gases

We present the results of a study of the inviscid two-dimensional spatial stability of a parallel compressible mixing layer in a binary gas. The parameters of this study are the Mach number of the fast stream, the ratio of the velocity of the slow stream to that of the fast stream, the ratio of the temperatures, the composition of the gas in the slow stream and in the fast stream, and the frequency of the disturbance wave. The ratio of the molecular weight of the slow stream to that of the fast stream is found to be an important quantity and is used as an independent variable in presenting the stability characteristics of the flow. It is shown that differing molecular weights have a significant effect on the neutral-mode phase speeds, the phase speeds of the unstable modes, the maximum growth rates and the unstable frequency range of the disturbances. The molecular weight ratio is a reasonable predictor of the stability trends. We have further demonstrated that the normalized growth rate as a function of the convective Mach number is relatively insensitive (Approx. 25%) to changes in the composition of the mixing layer. Thus, the normalized growth rate is a key element when considering the stability of compressible mixing layers, since once the basic stability characteristics for a particular combination of gases is known at zero Mach number, the decrease in growth rates due to compressibility effects at the larger convective Mach numbers is somewhat predictable.

Kozusko, F.↗
NASA NTRS1993

Effects of small changes in initial conditions on mixing layer three-dimensionality

The effects of relatively small changes in the initial conditions of the development of the 3D structure of a plane mixing layer originating from laminar boundary layers were experimentally studied. It is found that, while the exact shapes and positions of the streamwise vortex structures are not the same for the two initial conditions, their overall distribution, reorganization, and decay are very similar. The results likely that while some of the specific details of the streamwise vortex structure may be facility-dependent, a relatively strong structure which produces significant three-dimensionality should form in all mixing layers originating from laminar boundary layers. After some initial readjustments, the structure will appear in the form of counterrotating pairs of streamwise vortices which in the mean, grow with the mixing layer and decay in strength. The results also serve to warn that small changes in initial conditions may significantly affect the Reynolds stress distributions in the near field.

Plesniak, M. W.↗
NASA NTRS1991

Some effects of swirl on turbulent mixing layer development

Effects of swirl on the development of an axisymmetric turbulent mixing layer have been studied. The development of the zero swirl case is found to be consistent with that of a single-stream mixing layer developing from a tripped boundary layer. In particular, the consistency of the measured stress levels shows the accuracy of the measurement system. Swirl increases all the Reynolds stress levels with the increased scaling with swirl number. The shear stresses are found to be affected significantly more than the normal stresses. The stress increases are partly explained by considering extra production terms in the transport equations that are activated by the presense of the swirl. The thickness and growth rate for the lower swirl rate are found to be comparable to the zero swirl case, while those for the higher swirl rate are increased significantly, in line with the increased Reynolds stresses.

Mehta, R. D.↗
NASA NTRS1988

The structure and dynamics of reacting plane mixing layers

Experimental studies of the combusting mixing layers formed over a rearward facing step and between two parallel streams are reported. The steady behavior of the mean properties of the reacting flows is similar to that of nonreacting flows except for the global effects of thermodynamic property changes. Vortices form by the two-dimensional K-H instability and grow by subharmonic combination until the layer begins to interact with the walls. Unsteady behavior occurs when there are resonator interactions with the K-H instability or the instability associated with the recirculation vortex in the rearward facing step flow.

Keller, J. O.↗
NASA NTRS1988

Chaos in a spatially-developing plane mixing layer

A spatially-developing plane mixing layer was analyzed for chaotic behavior. A direct numerical simulation of the Navier-Stokes equations in a 2-D domain infinite in y and having inflow-outflow boundary conditions in x was used for data. Spectra, correlation dimension and the largest Lyapunov exponent were computed as functions of downstream distance x. When forced at a single (fundamental) frequency with maximum amplitude, the flow is periodic at the inflow but becomes aperiodic with increasing x. The aperiodic behavior is caused by the presence of a noisy subharmonic caused by the feedback between the necessarily nonphysical inflow and outflow boundary conditions. In order to overshadow this noise the flow was also studied with the same fundamental forcing and added random forcing of amplitude upsilon prime sub R/delta U = 0.01 at the inlet. Results were qualitatively the same in both cases: for small x, spectral peaks were sharp and dimension was nearly 1, but as x increased a narrowband spectral peak grew, spectra decayed exponentially at high frequencies and dimension increased to greater than 3. Based on these results, the flow appears to exhibit deterministic chaos. However, at no location was the largest Lyapunov exponent found to be significantly greater than zero.

Broze, J. G.↗
NASA NTRS1991

Stability of compressible reacting mixing layer

Linear instability of compressible reacting mixing layers is analyzed with emphasis on the effects of heat release and compressibility. Laminar solutions of the compressible boundary-layer equations are used as the base flows. The parameters of this study are the adiabatic flame temperature, the Mach number of the upper stream, frequency, wavenumber, and the direction of propagation of the disturbance wave. Stability characteristics of the flow are presented. Three groups of unstable modes are found when the Mach number and/or heat release are large. Finally, it is shown that the unstable modes are two-dimensional for large heat release even in highly compressible flow.

Shin, D. S.↗
NASA NTRS1994

The boundary layer of Mars: Fluxes, stability, turbulent spectra, and growth of the mixed layer

Spectra of wind from high-frequency measurements in the Martian atmospheric surface layer, along with the diurnal variation of the height of the mixed surface layer, are calculated for the first time for Mars. Heat and momentum fluxes, stability, and z(sub 0) are estimated for early spring from a surface temperature model and from Viking Lander 2 temperatures and winds at 44 deg N, using Monin-Obukhov similarity theory. Flow distortion by the lander is also taken into account. Model spectra for two measuring heights and three surface roughnesses are calculated using the depth of the mixed layer and the surface-layer parameters. These experiments indicate that z(sub 0) probably lies between 1.0 and 3.0 cm, and most likely is closer to 1.0 cm. The spectra are adjusted to simulate aliasing and high-frequency rolloff, the latter caused by both the sensor response and the large Kolmogorov length on Mars. Since the spectral models depend on the surface parameters, including the estimated surface temperature, their agreement with the calculated spectra indicates that the surface-layer estimates are self-consistent. This agreement is especially noteworthy in that the inertial subrange is virtually absent in the Martian atmosphere at this height, due to the large Kolmogorov length scale. These analyses extend the range of applicability of terrestrial results and demonstrate that it is possible to estimate the effects of severe aliasing of wind measurements, to produce models that agree well with the measured spectra. The results show that similarity theory developed for Earth applies to Mars, and that the spectral models are universal.

Tillman, James E.↗
NASA NTRS1990

Turbulent mixing layers in the interstellar and intracluster medium

Cold clouds embedded in hot turbulent gas are often observed in the interstellar medium of galaxies and in the intracluster medium. Mixing layers develop around the clouds by the action of the turbulent gas. It is shown that their column density is limited by cooling and their mean temperature by the momentum flux. Provided that mixing is efficient, the mean temperature is the geometric mean of the hot and cold gas temperatures. EUV radiation from mixing layers around filaments in cluster cooling flows photoionizes the colder gas and may produce the commonly observed optical and UV emission lines. Mixing layers around cold galactic clouds can produce absorption by O VI and similar species with a column density consistent with observations.

Begelman, Mitchell C.↗