Morphological Methods for Signal Extraction and Parameter Estimation
Presentation is to be given at upcoming Reaction History Workshop, in conjunction with Lawrence Livermore National Lab and Los Alamos National Lab.
97 MATHEMATICS AND COMPUTING↗
SEARCH · Search NASA
Results for “NATIONAL LABS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Big Adaptive Rotor Phase I (Final Report)
The Big Adaptive Rotor (BAR) project was initiate by DOE in 2018 with the goal of identifying novel technologies that can enable large (>100m) blades for low specific power (SP) turbines. Five distinct tasks were completed to achieve this goal: 1. Assess trends, impacts, and value of low-SP turbines, 2. Wind turbine blade cost reduction roadmap study, 3. Research and Development (R&D) opportunity screening, 4. Detailed design and analysis, and 5. Low-cost carbon fiber. These tasks were completed by the national lab team consisting of Sandia National Laboratories (SNL), the National Renewable Energy Laboratory (NREL), and Lawrence Berkeley National Laboratory (LBNL). The objective of Task 1 was to assess the historical trends of low-SP of onshore deployments, and to assess the impact and value of low-SP turbines. Analysis under this task showed that there is significant value for low-SP turbines, especially in markets where there is a higher saturation of wind energy on the grid. This has to do with the fact that low-SP turbines have increased capacity factors, and can contribute more reliable energy to the grid, even in lower wind conditions. This bodes well as higher renewable scenarios are likely in the coming years. Task 2 was a detailed analysis on the logistical challenges of deploying very large (>100m) onshore blade. This work was completed by experts at DNV-GL. The report looked at various ways to get around the current transportation constraints which are estimated to be around 75m in length. The report concluded that there are viable solutions to this issue including: segmented blades (which the industry is already pursuing), lighter than air (LTA) transportation, on-site manufacturing, and controlled bending of blades on rail. The final option was recommended for further analysis and study by DOE and the national labs because keeping a single piece blade reduces manufacturing and operations and maintenance (O&M) costs. Task 3 focused on identifying novel concepts that are capable of enabling a cost effective 5MW 206m rotor for onshore deployment. The findings from the first two tasks were considered in the analysis, in that the concepts identified must be able to overcome the transportation logistics challenges. Around 20 concepts were identified and evaluated by experts within the industry. Additionally, science and engineering challenges were identified for each concept. Based on these evaluations six concepts were deemed the most impactful and were selected for further analysis in Task 4. The concepts were: highly flexible rail transportable blades, downwind rotors, distributed aerodynamic control (DAC) devices, inflatable blade, bi-wing blade, and 4/5 bladed rotors. Task 4 conducted detailed design, optimization, and analysis on the selected BAR concepts. A modeling gaps analysis was conducted, and modeling improvements were implemented that allowed for the study and design of the novel concepts. The BAR team established a set of baseline designs by which to compare the selected designs through a technoeconomic analysis. It was found that the highly flexible rail transportable blade, the downwind rotor, and the DAC devices have the most promise to deliver the BAR targets. A Phase II for BAR has been proposed to further mature these concepts and address the open science and engineering challenges identified in Task 3. Task 5 conducted research on optimized carbon fiber materials that were used throughout the BAR Phase I project. Overall, the BAR project has identified low-SP turbines as important to continued LCOE reductions for onshore turbines. Furthermore, the project has identified viable solutions to the technical and logistical challenges to realizing these goals. The most promising technologies that were identified in Phase I of the project will be further matured and de-risked in Phase II of the BAR project.
17 WIND ENERGY↗
Enhancing HEP research in predominantly undergraduate institutions and community colleges
The long-term success of HEP lies in expanding inclusiveness beyond national labs and academic research institutions to a vast community of predominantly undergraduate institutions (PUI) and community colleges (CC). Institutions such as PUIs and CCs offer an early starting point in the pipeline that can mitigate issues of lack of diversity and underrepresented participation of different groups in HEP. However, there are many underlying systemic, structural, and cultural challenges that need to be addressed collectively. Experimental collaborations are largely populated by national labs and research-focused academic institutions (non-PUIs). The faculty at PUIs and CCs have a high teaching load that is detrimental to their research participation. In addition, there is a lack of guidance, access, and tough competition for securing research funding. The students also suffer from a lack of research infrastructure and technical equipment that can only be found at national labs and larger universities. There are existing successful efforts to enhance the HEP research experience of students and faculty members. This paper discusses ways to leverage these to provide more research opportunities and establish a sustainable national program targeting specifically the issues faced by communities at PUIs and CCs. The need for research mentoring and skill building for faculty members is also laid out. The changes discussed in this paper would make a direct impact on the current spectrum of challenges.
Bellis, Matt↗
Integral LOCA fragmentation test on high-burnup fuel
Increasing the fuel burnup limit in light water reactors is sought to enhance fuel cycle economics and requires establishing a technical basis. Experimental observations of severe fuel fragmentation under loss-of-coolant-accident conditions at Halden and Studsvik had raised the need for additional considerations during the development of this technical basis. These test data suggested that the burnup threshold for high burnup fuel fragmentation may be influenced by pre-transient power. Additional loss-of-coolant-accident test data is therefore valuable to complement these tests and enhance the current state of understating. Oak Ridge National Lab has developed the Severe Accident Test Station capable of examining the oxidation kinetics and accident response of irradiated fuel and cladding materials for design basis accident and beyond design basis accident scenarios. Severe Accident Test Station provides various temperature profiles, steam, and the thermal shock conditions necessary for integral loss of coolant accident testing, defueled oxidation quench testing, and high-temperature beyond design basis accident testing. Severe Accident Test Station has been successfully installed and demonstrated in the Irradiated Fuels Examination Laboratory at Oak Ridge National Lab. Furthermore, descriptions of the in-cell re-fabrication capabilities and assembly of the loss-of-coolant-accident test train are provided. Installation of the Severe Accident Test Station system and in-cell re-fabrication restores United States capability to examine postulated and extended loss-of-coolant-accident conditions on spent fuel and cladding and provides a platform for evaluating advanced fuel and accident-tolerant fuel cladding concepts. Lastly, three in-cell integral loss-of-coolant-accident test were performed in the Severe Accident Test Station and compared to the Nuclear Regulatory Commission sponsored loss-of-coolant-accident test as well as the original loss-of-coolant-accident test performed at Argonne National Lab. Finally, the results of these tests as well as all publicly available integral loss-of-coolant-accident test were used to validate a threshold for high burnup fuel fragmentation.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE National Laboratories: Vital to U.S. science and technology [Slides]
DOE has extremely challenging and diverse missions, each born out of national need. The national labs serve as the science and technology engine for DOE missions. Each Lab stewards distinctive capabilities which DOE leverages through networks of labs address core missions, dynamic programs and rapid response needs. National lab networks have transformative impact.
96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
Genesis Mission Data cards
As data-intensive research and artificial intelligence become central to DOE mission science, the need for machine-actionable dataset documentation has grown accordingly. However, many DOE-aligned communities, including the Office of Science, NNSA, and cross-laboratory collaborations, have developed independent metadata practices. This fragmentation creates friction for discovery, federation, and reuse across programs. To address these challenges, this talk introduces the Genesis Data Card: a shared metadata artifact developed in collaboration with a broad DOE community (Jefferson Lab and the National Lab of the Rockies, Oak Ridge, Sandia, Idaho, Berkeley, and Los Alamos). The Genesis Data Card aims to standardize dataset documentation across DOE-aligned initiatives while remaining extensible to discipline-specific needs. This talk will describe the data card template and the supporting code to validate completed data cards, using a companion LinkML schema. I'll walk through the design decisions behind the template, its alignment with existing standards, its treatment of sensitivity and governance metadata, and the phased roadmap toward lifecycle-integrated "xCards" that support autonomous discovery and reuse. The talk closes with current gaps, ongoing work, and how others can contribute datasets and feedback to the shared repository.
McSpadden, Helen [Thomas Jefferson National Accele↗
STPPHAWKES
SAND2024-08541O STTPHAWKES software solution is a Bayesian estimation approach to a Hawkes process model that treats missing data as a latent variable in the estimation. The open-source software will be released to the R CRAN repository and Sandia National Labs’ Github. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.
Rowe, Stephen↗
Laser Welded Burst Disk Weld Tooling
A production run of 5550 hermetically sealed cylinder assemblies with precision pressure relief burst discs will be assembled and laser welded at a manufacturing lab at Sandia National Labs. Production of these cylinder assemblies requires many steps, including piece part machining, geometric inspection, cleaning, subassembly, complete assembly via laser welding, and finally leak checking. While this production run is large enough to invest in process optimization and specialized tooling, it is not quite large enough to dedicate new lab space and specify equipment specifically for this job. This study will investigate process parameters and their effects on quality and process flow time, as well as a fixturing design study with the goal of reducing process time while maintaining quality requirements.
42 ENGINEERING↗
CalWave's xWave Design for PacWave (Final Technical Report)
CalWave Inc. (CalWave) is developing a wave energy converter (WEC) technology that can generate electricity from ocean waves. CalWave’s design offers a unique approach to wave energy conversion that operates fully submerged and can actively adjust the wave excitation. This capability gives the architecture enhanced survivability in ocean storms without adding significant costs. Prior to this project, CalWave had completed a demonstration of a fully functional WEC system in an open ocean demonstration at nominal 1:5 scale under FOA 1663. The goal of this project was the detailed design, following relevant standards and industry best-practices, of a variant of the xWave WEC technology that can safely and efficiently operate at the DOE’s PacWave South test site for a targeted deployment of up two years. The WEC design and associated review processes proceeded in two distinct project phases: a ‘Preliminary’ and a ‘Final’ design phase. The first phase of the project consisted of the systematic design of the WEC’s key features with regards to appropriate IEC standards. The work resulted in a preliminary design of the xWave hull including structural and Power Take-Off (PTO) load estimates, as well as performance estimates for all ocean conditions the WEC would operate in at PacWave South. Following the first open-water demonstration of CalWave’s small-scale “x1” device under FOA 1663, lessons learned were fed directly into a comprehensive review of the xWave design in the second design phase of this FOA project. CalWave’s work was supported by Sandia National Lab (SNL) and the National Renewable Energy Lab (NREL) on the holistic WEC design, and detailed feedback from specialized partners on hull design, mooring and anchoring specification, and electrical grid interconnection. Optimization of the WEC system was performed using a novel numerical optimization tool developed by Sandia and optimization trends were confirmed via an experimental model scale tank test campaign. Performance estimates for PacWave and a detailed xWave design including integration of all relevant system components were concluded. The mooring design was also concluded in the Final design phase using the most up to date sea floor characterization (CPT) data.
16 TIDAL AND WAVE POWER↗
High Energy Density Physics of Inertial Confinement Fusion Ablator Materials
The historic December 5, 2022 experiment at Lawrence Livermore National Lab’s (LLNL) National Ignition Facility (NIF) reached fusion energy ignition for the first time. This is the most important scientific breakthrough of the 21st century paves the way to future clean inertial fusion energy (IFE). The diamond (high density carbon (HDC)) ablator material used in this experiment displays detrimental effects due to the development of hydrodynamic instabilities at the diamond/fuel interface under shock compression. New alternatives to diamond ablators are required to step up the energy yield in ICF experiments. The unique combination of mechanical strength (approaching that of diamond), the ability to accommodate high-Z dopants (in contrast to diamond), and the tunability of the properties (through synthesis material with varying sp 3 content) make amorphous carbon (a-C) a promising material for next-generation IFE ablative capsules. However, despite its critical importance to the IFE program, the behavior of a-C carbon at extreme temperatures and pressures remains largely unexplored. The primary goals of this project were to perform groundbreaking dynamic compression experiments and predictive simulations to uncover the fundamental high-energy-density physics of amorphous carbon. Our goals were (1) to uncover the metastability range of amorphous carbon and probe phase transitions to diamond or metastable supercooled liquid carbon; (2) to acquire high-quality equation of state (EOS) data and develop an experimentally validated EOS from machine-learning MD simulations of the complex states of carbon; and (3) to uncover the complex behavior of carbon liquid in both thermodynamically stable and metastable supercooled states by accessing large areas of carbon phase diagram with amorphous samples with variable sp 3 content. Our proposed experimental program included measurements of equation of state and diffraction measurements using the Omega EP laser at the Laboratory of Laser Energetics at the University of Rochester. The theoretical/simulation program involved the development of machine-learning models of the complex response of amorphous carbon under dynamic compression by performing molecular dynamics simulations at experimental time and length scales using leadership class DOE supercomputers. Simulations guided experiments to observe predicted phenomena and acquire critical experimental data in specific pressure-temperature domains to validate theoretical models. This research delivered fundamental properties of novel amorphous carbon IFE ablator material, including phase diagram and EOS. These results will aid in IFE target design and implosion experiments. A unique combination of predictive simulations and dynamic and static experiments provided a highly inspirational intellectual environment for graduate students and postdocs involved in this project.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Household Energy Use in Pennsylvania's Delaware Valley: An Energy-Focused Housing Stock Analysis
This report covers the housing stock analysis of the Energy to Communities Delaware Valley project. The analysis covers the housing stock of Bucks, Chester, Delaware, and Montgomery counties that border Philadelphia County in southeast Pennsylvania. It focuses primarily on single-family houses including their existing characteristics and energy consumption and the potential impact of various retrofit measure packages applied to them. This analysis was a collaborative effort among the project team, including national lab researchers and local organizations. It derives primarily from results of modeling tools from the national labs, especially NLR's ResStock, supplemented by key information from the study area.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
PowerAmerica (Final Technical Report)
The U.S. Department of Energy’s Advanced Manufacturing Office (predecessor to AMMTO) established PowerAmerica in December 2014 to develop and accelerate the adoption of wide bandgap (WBG) semiconductor chips and power electronics in manufacturing. The objective was to spark early commercialization of energy efficient products; educate and train the workforce; create high-tech jobs; and nurture the growth of the U.S. WBG semiconductor manufacturing industry. PowerAmerica isled by North Carolina State University by way of a five-year, $140M cooperative agreement with DoE. This private-public partnership with DoE includes member companies ranging from startups and small-medium enterprises to large system integrators, world-class universities, and national labs. The WBG power electronic ecosystem formed by our diverse membership is focused on using advanced manufacturing to 1) lower the cost of silicon carbide and gallium nitride semiconductor devices to be comparable to silicon devices; 2) demonstrate the system benefits and energy efficiency advantages of WBG semiconductor power electronics through system demonstrations that validate their effectiveness; and 3) build an education pipeline for a skilled workforce to meet the future demand for emerging WBG semiconductor markets — and enhance U.S. economic competitiveness globally. PowerAmerica was initially funded in six budget periods, each lasting 12 to 18 months. By the end of Budget Period 6 (August 2023), PowerAmerica had achieved its major objectives in technology development, semiconductor device cost reduction, ecosystem growth and engagement, and education and workforce development. Through strategic foundry investments, we helped to establish the first U.S. SiC foundry (X-FAB) and supported a lab (Microchip) to start SiC volume production. We’ve helped bring together companies from different parts of the supply chain, resulting in several successful new partnerships and business relationships. Through projects with some of the largest manufacturers of energy-intensive equipment in the U.S. — John Deere, GE, United Technologies, Raytheon, Carrier, Toshiba, and others — we have successfully demonstrated the energy and system benefits of WBG technology. We have also harnessed the unique capabilities and facilities of national labs — the Naval Research Laboratory, National Renewable Energy Laboratory, and Argonne National Laboratory — to help solve challenging technical problems for industry. Thanks to our many webinars, tutorials, annual events, and presence at major energy and electronics conferences around the world, the PowerAmerica name has become synonymous with WBG technology advancement. The commercial interest in WBG technology is higher than ever; companies and governments around the world have announced hundreds of millions of dollarsin future investment to build capacity — and compete with silicon in many markets and applications. We have trained hundreds of engineering students, from universities across the U.S., through hands-on projects and WBG coursework. Working professionals have also benefited through the years from our many targeted short courses, tutorials, and technical webinars. In short, PowerAmerica has made great strides in each of our key objectives, and the organization has been operating without government or NC State
14 SOLAR ENERGY↗
Overview of Tools to Provide Support for State Energy Programs [Slides]
This "Overview of Tools to Provide Support for State Energy Programs?" is a resource to support technical assistance programs, specifically motivated by the State Energy Program Direct TA program under SCEP at the Department of Energy. It provides a general description of seven unique tools - six by NREL, one by Argonne National Lab - which may be used to benefit state energy offices either through direct use (by state offices) or through contracted support (by national lab staff via TA programs).
97 MATHEMATICS AND COMPUTING↗
INL Lab Overview
Overview of Idaho National Lab, its capabilities, along with an introduction to INL's suite of tools for damage prediction & resilience.
Capabilities and Tools↗
WETO Software Stack Best Practices
Wind energy researchers typically share one key characteristic: a passion for increasing wind energy in the global energy mix. The U.S. Department of Energy (DOE) supports this mission in a number of ways including allocating funding directly to various aspects of wind energy research through the Office of Energy Efficiency and Renewable Energy (EERE) via the Wind Energy Technologies Office (WETO). While the traditional output of research is academic publication, software development efforts are increasingly a major focus. Software tools in the research environment allow researchers to describe an idea and quickly increase the scope and scale as they study it further. As a product of research, these tools represent a direct pipeline from researcher to industry practitioners since they are the implementation of ideas described in academic publications. Given this vital role in wind energy research and commercial development, the broad research software portfolio supported by WETO must maintain a minimum level of quality to support the wind energy field in the growing transition to renewable energy. This report outlines a series o f best practices to be adopted by all WETO-supported software projects, as well as expectations that the communities interacting with these projects should have of the developers and tools themselves. Wind energy research software has a unique standing in the field of scientific software. The stakeholders are varied with a subset being: (1) DOE EERE leadership, (2) DOE WETO leadership and program managers, (3) National lab leadership, (4) Associated project principle investigators, (5) Research software engineers, (6) Wind energy researchers in academia (including graduate students, post docs, and national lab staff), (7) Industry researchers and practitioners, (8) Commercial software developers, and (9) The general public interested in wind energy. These software are typically the end-user of other generic software libraries, so the funding cycles are often tied to applied research rather than the development of the software itself. Since the developers are also wind energy researchers, these tools are typically designed in a way that closely resembles the application in which they're used. Additionally, the expertise and incentives for the developers have a high variability, and often neither are aligned with software engineering or computer science. Given the unique environment in which wind energy research software is produced and consumed, it is critical for model owners to understand the context of their software. A framework for developing this understanding is to answer the following questions of a given software project: What is it's purpose? What is its role in the field of wind energy? What is the profile of the expected users? For how long will it be relevant? What is the expected impact? These questions allow model owners to identify the appropriate methods for the design, development, and long term maintenance of their software. Additionally, the answer provide context for future planners to understand why particular decisions were made and discern the consequences of changing course. The information is aggregated from experience within WETO-supported software development groups as well as external organizations and efforts to define the craft of research software engineering. These best practices aim to make the collaborative development process efficient and effective while improving the model understanding across stakeholders. Additionally, the general adoption of a common framework for software quality ensures that the end users of WETO software can trust these tools and accurately understand the risks to workflow integration.
17 WIND ENERGY↗
Energy I-Corps Annual Report 2022
The U.S. Department of Energy Office of Technology Transitions is pleased to provide an update on the Energy I-Corps program. Now in its eighth year, Energy I-Corps addresses critical gaps in workforce development for our National Lab researchers. It provides meaningful real-world opportunities for the application of commercialization and entrepreneurial skills to DOE technologies. As of November 2022, 191 teams from 12 National Labs have participated in Energy I-Corps over the course of 15 cohorts and the pilot. Since its inception, Energy I-Corps participants have learned from more than 180 industry mentors and conducted over 13,600 discovery interviews with companies like: EPRI, Shell, Ford, World Bank, Breakthrough Energy, John Deere, Siemens Gamesa, Chevron, Eaton, Samsung, Lowes, Johns Manville, LEGO, U.S. Army, Trane, Tesla, GM, Dow Chemical, 3M, Whirlpool, GE, Home Depot, and Amazon. Over 20 teams have launched new businesses based on their Energy I-Corps technology. Post Energy I-Corps, technologies have attracted over $140M in post-program funding and executed over 75 licenses.
cohort↗
Bottom-Up Costs and Market Analysis of the Horizontal Ribbon Growth (HRG) Technology (Final Report)
The American-Made Solar Prize is a prize competition from the U.S. Department of Energy that is designed to revitalize U.S. solar manufacturing. The competition aims to support the growth of U.S. solar manufacturing and reenergize American energy innovation by tapping into American's competitive spirit and the nation's unparalleled innovation ecosystem leveraging national labs, incubators, facilities and more. National Renewable Energy Lab (NREL) will provide technical and business advisement to the noted Solar Prize finalists. This CRADA will involve the development of a cost model of the CRADA Participant's horizontal ribbon growth (HRG) technology for making silicon wafers for solar cells.
14 SOLAR ENERGY↗
Furthering Advancement to Address Tough Problems Facing the Solar Energy Industry, Spurring the Next Wave of Solar Technology Innovations through Three Progressive Challenges and Cash Incentives (Final Report)
The American-Made Solar Prize is a prize competition from the U.S. Department of Energy that is designed to revitalize U.S. solar manufacturing. The competition aims to support the growth of U.S. solar manufacturing and reenergize American energy innovation by tapping into American's competitive spirit and the nation's unparalleled innovation ecosystem leveraging national labs, incubators, facilities and more. National Renewable Energy Lab (NREL) will provide technical and business advisement to the noted Solar Prize finalists. The CRADA Participant is in the process of developing a new continuous process for making silicon wafers for solar cells in a novel approach to horizontal ribbon growth. Under this CRADA, NREL will characterize the chemical, electrical, and crystallographic properties of the as-produced wafers to and work with the CRADA Participant to improve and modify processing conditions.
14 SOLAR ENERGY↗