Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nickel catalysts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Morphological Degradation of Oxygen Evolution Reaction-Electrocatalyzing Nickel Selenides at Industrially Relevant Current Densities

We investigated electrodeposited nanoparticulate nickel selenide (pre)catalysts that transform into nickel oxides/ oxyhydroxides under oxygen evolution reaction conditions in alkaline solutions. Previous studies of this transformation were conducted at lower current densities than those of industrial relevance (≥1 A cm −2 ). We used ultramicroelectrodes (UMEs) to achieve such current densities, benefiting from their small size, ensuring low absolute currents and low ohmic drop but high current densities. Morphological degradation of the catalyst material was only observed at current densities exceeding 1 A cm −2 but not for smaller ones. Using X-ray absorption, Xray photoemission spectroscopy, and X-ray diffraction, we confirmed that the degradation was accompanied by the literature-known transformation of nanoparticulate Ni 3 Se 2 (bulk)/NiSe (surface) into nickel oxyhydroxide. The transformation of the precatalyst goes along with a significant improvement in the charge transfer kinetics observed by decreasing Tafel slopes with ongoing experimental time extracted from cyclic voltammetry (CV) experiments and electrochemical impedance spectroscopy (EIS) in the high-frequency range. However, these kinetic improvements are accompanied by limitations in mass transport concluded from decreasing current responses at high overpotentials in CVs and increasing impedance in the low-frequency range of the EIS spectra after extended CV cycling. These mass transport limitations originated from morphological degradations at the UME exceeding 1 A cm −2 which we proved by applying identical location scanning electron microscopy. This has not been reported in studies that have been limited to lower current densities before. Our findings showcase how UMEs can be used to study (pre)catalysts (herein nickel selenides) under current densities of industrial relevance in the absence of ohmic drop-related ambiguities, combined with in-depth materials characterization studies, e.g., identical location microscopy and advanced spectroscopic methods. This approach enables direct evaluation and comparison of catalyst materials and thus demonstrates how to overcome long-standing limitations of electrocatalyst design and testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simple processing via thermal treatment and catalyst infiltration to enhance nickel electrode performance for liquid alkaline water electrolyzers

Two simple processes for enhancing liquid alkaline water electrolyzer performance are demonstrated. Both enhance 3D Ni electrodes by introducing a micron-scale rough structure throughout the bulk of the electrode. Oxidation/reduction relies on a simple thermal treatment cycle to create surface roughening through the volumetric expansion during NiO formation and volume contraction during reduction back to Ni metal. Catalyst infiltration introduces a washcoat of additional metal particles throughout the electrode, by flooding the electrode with catalyst precursor and converting it to micron-scale particles via a reducing thermal treatment. Further, the largest improvement in performance (211mV at 1.8Acm -2 ) is observed for infiltrated NiFe-3x catalyst. For Fe-free Ni-only electrodes, oxidation/reduction provides a larger improvement (157 mV at 1.8Acm -2 ) than infiltrated Ni-3X (106mV at 1.8Acm -2 ). For both processes, the observed electrode surface structure and performance is quite sensitive to the thermal treatment temperature.

08 HYDROGEN↗
DOE OSTI2022

Promoting the water dissociation of nickel sulfide electrocatalyst through introducing cationic vacancies for accelerated hydrogen evolution kinetics in alkaline media

Developing cost-effective non-precious electrocatalysts with excellent HER performance in alkaline media is of significance for industrial hydrogen production. Herein, we successfully endow Ni 3 S 2 with unprecedentedly enhanced alkaline HER activities by introducing nickel vacancies. The Ni 3 S 2 catalyst with nickel vacancies exhibits an ultralow overpotential of 35 mV at 10 mA cm –2 in 1 M KOH electrolyte, outperforming commercial Pt/C (56 mV) and most reported non-precious electrocatalysts. The electron paramagnetic resonance and X-ray absorption fine structure etc. validates the formation of Ni vacancies and the change of the geometric/electronic structure of Ni 3 S 2 . Additionally, the theoretical calculations reveal that the Ni sites with higher valence state neighbouring the Ni vacancies can promote the water dissociation, playing a vital role in accelerating HER kinetics in alkaline media. Finally, this work may provide a universal strategy to enhance the HER activity of transition-metal compound catalysts in alkaline media by means of cationic defect engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Confined Ni-In intermetallic alloy nanocatalyst with excellent coking resistance for methane dry reforming

Carbon dioxide and methane are two main greenhouse gases which are contributed to serious global warming. Fortunately, dry reforming of methane (DRM), a very important reaction developed decades ago, can convert these two major greenhouse gases into value-added syngas or hydrogen. The main problem retarding its industrialization is the seriously coking formation upon the nickel-based catalysts. Herein, a series of confined indium-nickel (In-Ni) intermetallic alloy nanocatalysts (In x Ni@SiO 2 ) have been prepared and displayed superior coking resistance for DRM reaction. The sample containing 0.5 wt.% of In loading (In 0.5 Ni@SiO 2 ) shows the best balance of carbon deposition resistance and DRM reactivity even after 430 h long term stability test. The boosted carbon resistance can be ascribed to the confinement of core–shell structure and to the transfer of electrons from Indium to Nickel in In-Ni intermetallic alloys due to the smaller electronegativity of In. Additionally, both the silica shell and the increase of electron cloud density on metallic Ni can weaken the ability of Ni to activate C–H bond and decrease the deep cracking process of methane. The reaction over the confined InNi intermetallic alloy nanocatalyst was conformed to the Langmuir-Hinshelwood (L-H) mechanism revealed by in situ diffuse reflectance infrared Fourier transform spectroscopy (in-situ DRIFTS). This work provides a guidance to design high performance coking resistance catalysts for methane dry reforming to efficiently utilize these two main greenhouse gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Large-scale synthesis of metal/nitrogen Co-doped carbon catalysts for CO 2 electroreduction

In this work, we report a facile approach for synthesizing M–N–C catalysts (M = Co, Fe, Ni) at a commercial scale without employing organic solvents. Our characterization efforts indicate that single atomic catalysts with high surface areas were successfully obtained. Electrochemical measurements demonstrate that, among the three synthesized catalysts, Ni–N–C exhibits the highest performance in the electrochemical CO2 reduction reaction (CO 2 RR) to carbon monoxide (CO), affording 80% Faradaic efficiency (FE) of CO production at –0.49 V RHE with a turnover frequency (TOF) of 57,379 h –1 . Large-scale synthesis coupled with high performance allows moving forward with the practical implementation of M–N–C catalysts for industrially relevant CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Temporal Ni K-Edge X-ray Absorption Spectroscopy Study Reveals the Kinetics of the Ni Redox Behavior of the Iron-Nickel Oxide Bimetallic OER Catalyst

Operando X-ray absorption spectroscopy (XAS) can be utilized to probe the phase and structural changes of FeNiOx and similar transition metal oxide electrocatalysts during electrocatalytic reactions. However, capturing the temporal changes occurring in the operando chemistry of electrocatalysts has been little studied. Here, in this work, we successfully capture the time-resolved changes at the Ni K-edge for both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions of an aqueous phase synthesized FeNiO x bimetallic nanoparticle electrocatalyst. During a stepped voltage experiment, the temporal change in the Ni K-edge was observed as the applied voltage was stepped from 0.7 to 0.8 V versus the silver/silver chloride reference electrode, and the change observed is associated with the Ni redox transition from the 2+ to 3+/4+ oxidation state. Individual XAS spectra were obtained in 90 s, and a total of 9 scans post voltage step showed a unique transition from a hydroxide to an oxyhydroxide phase. The shift in absorption edge energy position and the changes in spectral shape for individual scans explain the typically observed broadening of the Ni K-edge XANES spectrum during time-averaged operando XAS, and a kinetic analysis revealed a first-order observed rate constant, |k obs |, of 0.00426 s –1 and a half-life (t 1/2 ) of 163 s. Multivariate curve resolution-alternating least squares analysis followed by linear combination fitting analysis for time-averaged versus time-resolved Ni K-edge changes upon voltage step show distinct differences in estimated contributions from Ni 2+ oxide/hydroxide phases. Detailed EXAFS modeling shows the phase transition from hydroxide to oxyhydroxide on top of the unchanged metallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multiconfigurational Electronic Structure of Nickel Cross-Coupling Catalysts Revealed by X-ray Absorption Spectroscopy

Ni II 2,2'-bipyridine complexes are commonly invoked intermediates in metallaphotoredox cross-coupling reactions. Despite their ubiquity, design principles targeting improved catalytic performance remain underdetermined. A series of Ni( R bpy)( R 'Ar)Cl (R = MeOOC, t-Bu, R' = CH 3 , CF 3 ) complexes were proposed to have multiconfigurational electronic structures on the basis of multiconfigurational/multireference calculations, with significant mixing of Ni → bpy metal-to-ligand charge transfer (MLCT) configurations into the ground-state wave function. Here, Ni K-edge and L 2,3 -edge X-ray absorption spectroscopies provide experimental support for the highly covalent and multiconfigurational electronic structures of these complexes. The pre-edge intensity in the K-edge spectrum reflects highly covalent Ni–aryl bonding. The L 3 -edge spectral shape is dependent on ligand functionalization, and a feature reflecting the MLCT character is assigned using prior ab initio and new semiempirical calculations. The results suggest the push/pull effects of the aryl/bpy ligands moderate the changes in electron density on Ni during the multiredox cross-coupling reaction cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Carbon Nanotubes Grown By CVD in Various Conditions

Since the superior properties of multi-wall carbon nanotubes (MWCNT) could be used in numerous devices such as electronics and sensors, many efforts have been engaged in synthesizing particular structural or dimensional MWCNT. This presentation will illustrate MWCNT synthesized on silicon substrates by thermal CVD. On the substrate, an array of catalysts is coated using sputtering deposition. A thin Ti buffer layer is also coated on some Si substrates prior to depositing catalyst particles. Nickel, cobalt or iron transition metals are used as catalysts for the MWCNT growth. Since the diameter of MWCNT depends on the size of catalyst particles, the catalyst particle size is investigated after annealed at various temperatures. MWCNT are grown on the substrate in the temperature range of 700 to 1000 C and the pressure range of 100 torr to one atmosphere. Methane and hydrogen gases with methane content of 10% to 100% are used for the MWCNT synthesis. Morphology, length and diameter of these MWCNT are determined by scanning electron microscopy and Raman spectroscopy. The detailed results of syntheses and characterizations will be discussed in the presentation.

Zhu, S.↗
NASA NTRS2001

Carbon Nanotubes Growth by CVD in Various Conditions

Since the superior properties of multi-wall carbon nanotubes (MWCNT could be used in numerous devices such as electronics and sensors, many efforts have been engaged in synthesizing particular structural or dimensional MWCNT. This presentation will illustrate MWCNT synthesized on silicon substrates by thermal CVD. On the substrate, an array of catalysts is coated using sputtering deposition. A thin Ti buffer layer is also coated on some Si substrates prior to depositing catalyst particles. Nickel, cobalt or iron transition metals are used as catalysts for the MWCNT growth. Since the diameter of MWCNT depends on the size of catalyst particles, the catalyst particle size is investigated after annealed at various temperatures. MWCNT are grown on the substrate in the temperature range of 700 to 1000 C and the pressure range of 100 torr to one atmosphere. Methane and hydrogen gases with methane content of 10% to 100% are used for the MWCNT synthesis. Morphology, length and diameter of these MWCNT are determined by scanning electron microscopy and Raman spectroscopy. The detailed results of syntheses and characterizations will be discussed in the presentation.

Zhu, S.↗
DOE OSTI2025

Ammonia Decomposition Catalyst Development for Palladium Membrane Reactor

Conclusions and Questions • Tritiated ammonia is a persistent problem in tritium operations. • Tritiated ammonia can be completely converted to nitrogen and tritium using a permeation membrane reactor. • Ruthenium trimetallic catalysts are highly active at PdAg temperatures. • Catalysts from nitrate precursors are more active than from chloride. • Nickel-based catalysts are potential replacements for ruthenium catalysts.

Guin, Tyler [Savannah River National Laboratory (S↗
DOE OSTI2023

Hydrothermal catalytic conversion of oleic acid to heptadecane over Ni/ZrO 2

There is growing interest in the substitution of expensive noble metal catalysts with low-cost earth-abundant metals in applications targeting biofuels production from waste organic feedstocks. Here, nickel (Ni) catalysts supported on zirconium dioxide (ZrO 2 ), both with and without copper (Cu) as a co-metal, were tested in hydrothermal reactions of unsaturated and saturated C18 fatty acids as models for waste oil feedstocks. In contrast to recent reports, this study showed no enhancement of nickel's activity for fatty acid conversion to alkane products when Cu was present. Ni/ZrO 2 prepared by metal coprecipitation methods converted 100% of oleic acid with 25% selectivity to heptadecane after 5h of reaction at 350 °C using methanol as a hydrogen donor source, increasing to 41% heptadecane after 20 h. Lower yields were observed with catalysts prepared by wet impregnation and using alternative hydrogen donor sources (glycerol, formic acid). Greater selectivity to heptadecane was also observed at higher temperatures (370 °C) and when the initial fatty acid had greater saturation. Longer term exposure to hydrothermal media led to metal sintering and catalyst deactivation. Findings support a path forward to the development of earth-abundant metal catalysts for the upgrading of waste organic feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2026

Synergistic Solvent-Surface Interactions Enable Alkyne Semihydrogenation at Palladium

Enabling higher yield and better selectivity for fine-chemical synthesis through heterogeneous catalysis is intricately linked to the interplay of active sites, reaction conditions, and mass transfer influence provided by the catalyst. Alkyne semihydrogenation is ubiquitous in the production of bulk chemicals in the pharmaceutical, polymer, or fine-chemical industries, but product selectivity remains a major challenge. Here, in this study, we demonstrate that the design of catalysts encompassing nickel (Ni) foams as contiguous monolith supports, decorated with ultralow loading of Pd/PdO x nanoparticles on a carbonized polydopamine interface and tuned with a thin layer of Al 2 O 3 , in conjunction with an optimized reaction environment leads to highly selective alkyne semihydrogenation. The reactions demonstrate good functional group tolerance and applicability to flow reactor systems. Combined computational and experimental studies are presented to describe the synergistic effect between the solvent-surface interaction and the degree of Pd surface reduction that are necessary to promote this selectivity. The system highlights the opportunity for catalyst-solvent codesign as a benign alternative to more complex reactants featuring extrinsic poisons or less-favored dopants.

atomic layer deposition↗
DOE OSTI2021

Processing of SOFC Anodes for Enhanced Intermediate Temperature Catalytic Activity at High Fuel Utilization (Final Report)

The overall objective was to infiltrate anodes with nanoparticle catalysts so that anode catalytic performance can be improved as anode operation temperature is reduced from 800°C to intermediate temperatures of 700°C and 600°C and as anode fuel utilization is increased. The addition of nickel nanoparticle catalysts into the anode improves performance by providing additional triple phase boundaries (TPBs), increasing the density of electrochemical reaction sites. To achieve this goal, both liquid phase and vapor phase methods for depositing nickel nanoparticles in the anode active layer, the region of the anode near the electrolyte where the electrochemical reaction occurs. It is imperative that nanoparticles are stable against coarsening during long-term operation, so the mechanisms and kinetics of nanoparticle stability during cell operation will be investigated. Finally, priority is given to processes that are scalable and easily transferable to industry, leveraging existing Ni-YSZ cermet anode technology. Utilizing nickel nanoparticles at different temperatures has different considerations that will be addressed. At the upper end of the intermediate temperature range (800°C), it is important that performance improvement is maintained over long periods by mitigating the instability of nanoparticles. At the middle of the temperature range (700°C), it is important that performance improvement is maintained at high fuel utilizations. At the lower end of the temperature range (600°C), where the performance of cells is poor due to increased resistances, it is important to improve anode performance by significantly increasing the electrochemical reaction site density, while nanoparticle durability is less of an issue. Finally, the objective was to explore mixed ionic and electronic (MIEC) nanoparticle catalysts like GDC to see if 2-phase boundaries can be created to increase the electrochemical reactions at the anode.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Ni Anchored to Hydrogen-Substituted Graphdiyne for Lithium Sulfide Cathodes in Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are promising candidates for next-generation energy storage systems due to their high theoretical energy density and the low cost of sulfur. However, slow conversion kinetics between the insulating S and lithium sulfide (Li 2 S) remains as a technical challenge. In this work, we report a catalyst featuring nickel (Ni) single atoms and clusters anchored to a porous hydrogen-substituted graphdiyne support (termed Ni@HGDY), which is incorporated in Li 2 S cathodes. The rapidly synthesized catalyst was found to enhance ionic and electronic conductivity, decrease the reaction overpotential, and promote more complete conversion between Li 2 S and sulfur. The addition of Ni@HGDY to commercial Li 2 S powder enabled a capacity of over 516 mAh g Li 2 S –1 at 1 C for over 125 cycles, whereas the control Li 2 S cathode managed to maintain just over 200 mAh g Li 2 S –1 . In conclusion, these findings highlight the efficacy of Ni as a metal catalyst and demonstrate the promise of HGDY in energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2022

Self-adhesive ionomers for durable low-temperature anion exchange membrane electrolysis

Low-temperature water electrolysis using an anion conductive polymer electrolyte has several potential advantages over other technologies, however, the fabrication of durable alkaline electrodes remains a challenge. Detachment of catalysts results in the loss of electrochemical surface area. Simple mixtures of ionomer and catalyst can suffer from poor catalyst adhesion because only physical adhesion is used to bind the components together. A family of chemically bonded, self-adherent, hydroxide conducting ionomers were synthesized and tested under alkaline electrolysis conditions with nickel ferrite anode electrocatalysts and platinum-nickel cathode catalyst. The ionomers are based on hydroxide conducting poly(norbornene) polymers used as the solid polymer electrolyte in alkaline fuel cells and electrolyzers. The synthesized terpolymer ionomers have been functionalized to provide pendant sites for covalent chemical bonding of bis(phenyl)-A-diglycidyl ether to the ionomer, catalyst, and porous transport layer. The electrodes show excellent adhesion between the catalyst particles, porous transport layer and ionomer, as determined by adhesion measurements and electrolysis performance. As a result, the AEM electrolyzer had stable voltage performance under high current density (1 A/ cm 2 at 1.83 V (67% voltage efficiency)) for extended time periods (>600 h) without degradation.

08 HYDROGEN↗