Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear Material Accounting and Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fuel Fabrication and Single Stage Aqueous Process Modeling

The Material Protection, Accounting, and Control Technologies program utilizes modeling and simulation to assess Material Control and Accountability (MC&A) concerns for a variety of nuclear facilities. Single analyst tools allow for rapid design and evaluation of advanced approaches for new and existing nuclear facilities. A low enriched uranium (LEU) fuel conversion and fabrication facility simulator is developed to assist with MC&A for existing facilities. Measurements are added to the model (consistent with current best practices). Material balance calculations and statistical tests are also added to the model. In addition, scoping work is performed for developing a single stage aqueous reprocessing model. Preliminary results are presented and discussed, and next steps outlined.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Low Enriched Fuel Fabrication Safeguards Modeling

The Material Protection, Accounting, and Control Technologies (MPACT) program utilizes modeling and simulation to assess Material Control and Accountability (MC&A) concerns for a variety of nuclear facilities. Single analyst tools allow for rapid design and evaluation of advanced approaches for new and existing nuclear facilities. A low enriched uranium (LEU) fuel conversion and fabrication facility simulator has been developed to assist with MC&A for existing LEU fuel fabrication for light water reactors. Simulated measurement blocks were added to the model (consistent with current best practices). Material balance calculations and statistical tests have also been added to the model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Assessing the Impact of Increased Verification Measurements of Category III/IV Material Receipts

Revisions to the US Department of Energy (DOE) regulations for material control and accountability are expected to dramatically increase the number of verification measurements required upon receipt of nuclear material transfers. Material categories and types that were not routinely quantitatively measured upon receipt (Category III and IV) have been added to the more detailed regulations on shipments and receipts of nuclear materials. In anticipation of this change to the regulations, this project was initiated to identify measurement needs in the DOE complex with respect to performing these additional quantitative measurements. The results of surveying multiple DOE facilities to understand the scope of the impact and the potential measurement capability needs are presented.

Bean, Robert↗
DOE OSTI2020

Analysis of Nuclear Materials on Both Sides of Regulatory Control: from IAEA Safeguards to Global Counter-Nuclear Smuggling

Global nuclear security is dependent upon the sustained and verifiable control of radiological and nuclear (R/N) materials within nuclear facilities, under the administrative purview of national governments. It is the responsibility of each country to account for their R/N materials holdings and to ensure that they do not escape regulatory control and fall into the wrong hands. The Office of Nuclear Smuggling Detection and Deterrence (NSDD) is tasked with providing support to foreign partners in developing the tools and expertise to detect, disrupt, and investigate R/N materials encountered out of regulatory control, in such circumstances as at border crossings and other checkpoints, or in the course of routine policework. Thankfully, such incidents are infrequent, and NSDD continues to work bilaterally with partner countries to strengthen their capabilities to combat nuclear smuggling and trafficking incidents in their countries. For the vast majority of R/N materials that remain under regulatory control, however, it is critical that their safe storage and use be independently verified. Even a single loss incident of R/N materials, particularly of special nuclear materials (highly-enriched uranium and plutonium) has the potential to cause a catastrophe. How can the international community be assured that R/N materials currently under national regulatory control remain there?

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Domestic Safeguards Material Control and Accountancy Considerations for Molten Salt Reactors

Molten salt reactors (MSRs) are a class of nuclear reactor designs with features and operational characteristics that vary significantly more than the class of light water reactors (LWRs). MSR design concepts can be broadly categorized as solid-fueled reactors with molten salt as the coolant, liquid-fueled reactors with fuel dissolved in molten salt coolant and liquid-fueled reactors with fuel dissolved in molten salt that is contained in distinct fuel tubes with a nonfissile coolant. Proposed MSR concepts include features that are specific to each design. MSR concepts vary widely across these design features, including the physical, chemical, and isotopic composition of fresh and irradiated fuel. Operational neutron energy spectrums and breeding ratios also vary significantly across design concepts. Some concepts are burner reactors designed to transmute the spent nuclear fuel from LWRs or pressurized heavy water reactors (PHWRs), while others are breeder reactors designed to breed fissile 233 U from naturally occurring fertile 232 Th. Some MSR concepts are designed to be a part of a once-through fuel cycle, while others involve chemical separation. Those that include plans to recycle the fuel differ by whether the chemical processing would be done onsite, as a process connected to the fuel salt itself, or offsite at a reprocessing facility similar to how LWR or PHWR spent fuel is reprocessed in some countries. Each overall design concept contains various aspects of each of these features to produce a unique facility

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Material Control and Accounting Regulatory and Technical Considerations for Microreactors

New microreactors must comply with the Material Control and Accounting (MC&A) regulations in 10CFR74. The objective of MC&A is to verify that the nuclear material is not stolen or diverted to unauthorized users. Microreactors have unique features which pose new challenges to addressing these regulations. This work considers general approaches and methods for microreactor MC&A based on the reactor life cycles which have been proposed by microreactor vendors. One key aspect of MC&A is measurement of the nuclear material. Measurement of microreactor fuel could be especially important because the cores may be sealed for up to 20 years, preventing direct visual confirmation. Measurements could also be especially challenging due to the thick shielding designed around microreactors. This work evaluates a range of techniques used in medical, industrial, and nuclear fields. The cost, time, and performance of the techniques were estimated. Finally, for a promising technique of using in-core neutron detectors, the feasibility was analyzed in detail.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Technology Advancement and Insertion into Operating Nuclear Facilities

Key challenges in the NNSA modernization effort are centered around the selection of new processing / production technologies to deploy in existing, operating, and oftentimes, aging nuclear facilities. New uranium processing technologies may offer significant improvements in worker and environmental safety, material control and accountability, and production efficiencies, but adaptation of these technologies into existing facilities presents unique (and usually, difficult) engineering solutions for each new technology. This presentation discusses approaches utilized at Y-12 to mature and demonstrate new processing and production technologies for deployment into nuclear facilities. The technology advancement lifecycle (from concept to deployment) of uranium electrorefining technologies will be reviewed, as a prototypical example, to describe steps and approaches utilized at Y-12 (and NNSA Sites) to (i) mature technologies and manufacturing strategies, (ii) establish testbed capabilities for full-scale process demonstrations, and (iii) reduce risks associated with operational disruptions when commissioning new uranium processing technologies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Technology Advancement and Insertion into Operating Nuclear Facilities

Key challenges in the NNSA modernization effort are centered around the selection of new processing / production technologies to deploy in existing, operating, and oftentimes, aging nuclear facilities. New uranium processing technologies may offer significant improvements in worker and environmental safety, material control and accountability, and production efficiencies, but adaptation of these technologies into existing facilities presents unique (and usually, difficult) engineering solutions for each new technology. This presentation discusses approaches utilized at Y-12 to mature and demonstrate new processing and production technologies for deployment into aging nuclear facilities. The technology advancement lifecycle (from concept to deployment) of uranium electrorefining technologies will be reviewed, as a prototypical example, to describe steps and approaches utilized at Y-12 (and NNSA Sites) to (i) mature technologies and manufacturing strategies, (ii) establish testbed capabilities for full-scale process demonstrations, and (iii) reduce risks associated with operational disruptions when commissioning new uranium processing technologies.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Simulation of Isotopic Concentrations and Gamma Spectra from Dynamic Fission Sources

A tool was developed to rapidly generate synthetic gamma-ray spectra to evaluate safeguards material control and accounting methods for liquid-fueled molten salt reactors. Molten salt reactor operations pose unique challenges to nuclear safeguards methods and protocols compared to deployed reactors designs (e.g., light water reactors). This research evaluates the use of gamma-ray spectroscopy to monitor fission product isotopic flow through a reactor model to understand expected operations and investigate changes to the spectra with material diversion scenarios. The large design space of molten salt reactors (e.g., liquid-fueled, liquid-cooled, online separations) could potentially lead to many measurement points within the reactor system. The developed analytical tool generates and evaluates synthetic gamma-ray spectra from dynamic reactor simulations by extracting isotopic inventory to generate source terms. An implementation in the Gamma Detector Response and Analysis Software (GADRAS) Application Program Interface (API) uses the source terms, a model of the reactor component, a detector response function, and measurement plan to quickly generate and analyze spectra. Prospective measurements are then evaluated in the more accurate but slower Geant4 simulations. Utilization of the developed modeling tool and analysis of the subsequent spectra enables optimization of collimation, shielding requirements, and expected count rates that are used to determine key measurement points in the modeled reactor design.

O'Brien, Sean↗
DOE OSTI2025

Developments to the Distributed Holdup Monitoring System in Fiscal Year 2025

Permanently installed holdup monitoring would provide a myriad of benefits to nuclear facilities, ranging among decreased facility burden, increased safety bases, and increased accuracy of relevant material controls and accountancy metrics. However, the cost per detection system must be affordable to provide reliable coverage. For this project, the target unit price per system has been $\$$1,000. Recent work has focused on pushing costs lower through developing a plastic scintillator and silicon photomultiplier (SiPM)–based front end, which are components that are not commercially available in conjunction with each other. Other work has included further system development and use of a low-cost SiPM. Finally, a limited deployment at a processing facility was achieved. Results from this deployment and the development process are discussed in detail.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Special Nuclear Geometric Modeling

This report is a summary of our summer interns project that focused on investigating the usefulness of the Gamma Detector Response and Analysis Software (GADRAS) into the Material Control & Accountability (MC&A) Measurements Team. The project's findings highlight the advantages of using GADRAS and demonstrate its value in improving the MC&A Measurements Team's analytical capabilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Safeguards Modeling for Advanced Nuclear Facility Design.

Future nuclear fuel cycle facilities will see a significant benefit from considering materials accountancy requirements early in the design process. The Material Protection, Accounting, and Control Technologies (MPACT) working group is demonstrating Safeguards and Security by Design (SSBD) for a notional electrochemical reprocessing facility as part of a 2020 Milestone. The idea behind SSBD is to consider regulatory requirements early in the design process to provide more optimized systems and avoid costly retrofits later in the design process. Safeguards modeling, using single analyst tools, allows the designer to efficiently consider materials accountancy approaches that meet regulatory requirements. However, safeguards modeling also allows the facility designer to go beyond current regulations and work toward accountancy designs with rapid response and lower thresholds for detection of anomalies. This type of modeling enables new safeguards approaches and may inform future regulatory changes. The Separation and Safeguards Performance Model (SSPM) has been used for materials accountancy system design and analysis. This paper steps through the process of designing a Material Control and Accountancy (MC&A) system, presents the baseline system design for an electrochemical reprocessing facility, and provides performance metrics from the modeling analysis. The most critical measurements in the electrochemical facility are the spent fuel input, electrorefiner salt, and U/TRU product output measurements. Finally, material loss scenario analysis found that measurement uncertainties (relative standard deviations) for Pu would need to be at 1% (random and systematic error components) or better in order to meet domestic detection goals or as high as 3% in order to meet international detection goals, based on a 100 metric ton per year plant size.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

A literature review of pyroprocessing safeguards

Pyroprocessing is a promising technology for reprocessing used nuclear fuel (UNF) from light water reactors (LWR) and sodium fast reactors (SFR). With the advancement of fast reactors with projects from companies such as TerraPower, the prospects of pyroprocessing are more promising than ever before, as fast reactors can consume all actinides, not just uranium and plutonium. Before pyroprocessing can be implemented commercially, pre-existing safeguards used for aqueous reprocessing must be adapted for pyroprocessing. Safeguards, as determined by both the Nuclear Regulatory Commission (NRC) and the International Atomic Energy Agency (IAEA), are discussed in this review as guidelines for approaches used in both domestic and international reprocessing plants. The implementation of safeguards in aqueous reprocessing was then reviewed based on the experience from existing aqueous facilities. The experimental pyroprocessing facilities were identified as pyroprocessing plants in the design stage with one operating exception of the Fuel Conditioning Facility (FCF). The safeguard methods implemented or designed for each and the accompanying challenges of utilizing existing safeguards in pyroprocessing are considered and a summary of applicable approaches is included.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Quantifying uncertainty in uranium concentration measurements via K-edge densitometry

This study quantifies the uncertainty in uranium concentration predictions of fluoride and chloride-based salts within a steel pipe using K-edge densitometry. Modeling and simulation was conducted with the Monte Carlo N-Particle Transport (MCNP) code. The quality of of this technique’s prediction in a pipe requires proper characterization of the pipe’s thickness, which is dependent on the source size and axial offset from the pipe centerline. The thickness was determined as either the center-line thickness seen by the X-ray source or an average value determined through random sampling. Generally, the predicted concentrations were slightly better at lower offset with the random sampling thickness and using the center-line thickness for the highest offsets. For a line-beam source and varying axial offsets, the relative error of concentration was within 1% of the true value but uncertainty increased by 2 orders of magnitude. Similarly, for no axial offset, the relative error was significantly less than 1% while no trend for uncertainty was found. However, at the largest possible offset for a given source size, the concentrations become erroneous and greater than the allowable 1% relative error. Furthermore, high offsets tended to increase the variance of the transmission spectra by 3 orders of magnitude.

Characterization and Analytical Technique↗
DOE OSTI2021

Development of MCNP Training Modules for Safeguards Practitioners [Abstract]

The Monte-Carlo N-Particle (MCNP) software developed at LANL is the most widely used neutron transport code in the world. It is an essential tool for a variety of applications including detector development and design, nuclear fuel burnup simulation, criticality safety, and nondestructive assay system optimization. For this reason, it is indispensable within the safeguards and materials control & accountability (MC&A) communities. Multiple MCNP training courses have been created and taught over the last several decades by the MCNP development team at LANL, however there are no existing courses that cover specialized topics considered fundamental to NDA and safeguards models. To fill this gap, the MCNP team and Safeguards Science and Technology group at LANL have co-created a set of training modules customized to meet the specialized needs of the safeguards and MC&A communities. The basic modules cover concepts such as NDA system optimization, He-specific and other capture tallies, and tools for improved theoretical understanding. An advanced module was also created to cover topics including variance reduction for active interrogation simulations, use of the LANL MCNPTools post-processor, PTRAC (particle tracking) and list-mode data simulations, and fuel burnup simulations. The training modules teach to the latest and most state-of-the-art MCNP features and tools released by the development team at LANL and are intended to be taught jointly by the developers and safeguards experts. Ultimately, we hope that creation of these modules will serve to capture and convey the safeguards modeling and MCNP expertise at LANL, and that we will be able to share the modules more broadly with the MC&A and safeguards communities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Flow Enhanced Electrochemical Sensor Performance in Complex Salt Systems

To advance MSR MC&A practices, Argonne National Laboratory developed and optimized robust flow enhanced electrochemical sensors (FEES) and multielectrode array voltammetry sensors (MAVS) which provide accurate near-real time measurements of actinides in molten salts. Flow-enhanced electrochemical sensors are installed directly into MSR flow conduits for inline salt chemistry measurement, while MAVS are deployed in quiescent salt conditions enabling online species concentration determination in stationary salt vessels. This report summarizes efforts to improve electrochemical sensor technological readiness through (1) sensor testing in complex, high concentration molten salt systems to demonstrate low uncertainty actinide measurements in MSR-representative solutions and (2) demonstrations of sensor performance in challenging real-world conditions in collaboration with partner MSR institutions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

2026 Annual Molten Salt Reactor Campaign Review

This report documents the 2026 Annual Molten Salt Reactor (MSR) Campaign Review held in Albuquerque, New Mexico, from April 21–24, 2026. The review was organized by Dr. Patricia Paviet, National Technical Director of the Advanced Reactor Technology (ART) MSR program for the U.S. Department of Energy Office of Nuclear Energy (DOE-NE), and included participation from principal investigators, federal managers, developers, regulators, and members of the broader MSR community. The 2026 review expanded beyond the ART-MSR campaign to include related DOE-NE programs supporting molten salt reactor advancement, including the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the Advanced Materials and Manufacturing Technologies (AMMT) program, Advanced Reactor Safeguards and Security (ARSS), Material Protection, Accounting and Control Technologies (MPACT), and relevant advanced fuels activities. Three days were dedicated to technical presentations and panel discussions covering thermal properties, off-gas management, modeling and simulation, safety and licensing, safeguards and security, materials and corrosion, and irradiation activities. A fourth day was dedicated to technical tours of Sandia National Laboratories and Kairos Power facilities. Attendance was strong and comparable to the prior annual review, with approximately 75 in-person participants per day, 75–80 virtual attendees per day, and approximately 30 participants in the tour day. The review fostered significant technical exchange across national laboratories, universities, industry, regulators, and international participants. This report summarizes the review structure, technical themes, participation, tours, feedback, and conclusions relevant to future planning for the MSR campaign.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗