Search NASA⌕ Search

SEARCH · Search NASA

Results for “OCCUPATIONAL SAFETY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

NASA/FAA general aviation crash dynamics program - A status report

The objective of the Langley Research Center general aviation crash dynamics program is to develop technology for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: controlled full-scale crash testing, nonlinear structural analyses to predict large deflection elasto-plastic response, and load attenuating concepts for use in improved seat and subfloor structure. Both analytical and experimental methods are used to develop expertise in these areas. Analyses include simplified procedures for estimating energy dissipating capabilities and complex computerized procedures for predicting airframe response. These analyses are being developed to provide designers with methods for predicting accelerations, loads, and displacements of collapsing structure. Tests on typical full-scale aircraft and on full- and sub-scale structural components are being performed to verify the analyses and to demonstrate load attenuating concepts.

Thomson, R. G.↗
NASA NTRS1996

Monitoring occupational exposure to cancer chemotherapy drugs

Reports of the health effects of handling cytotoxic drugs and compliance with guidelines for handling these agents are briefly reviewed, and studies using analytical and biological methods of detecting exposure are evaluated. There is little conclusive evidence of detrimental health effects from occupational exposure to cytotoxic drugs. Work practices have improved since the issuance of guidelines for handling these drugs, but compliance with the recommended practices is still inadequate. Of 64 reports published since 1979 on studies of workers' exposure to these drugs, 53 involved studies of changes in cellular or molecular endpoints (biological markers) and 12 described chemical analyses of drugs or their metabolites in urine (2 involved both, and 2 reported the same study). The primary biological markers used were urine mutagenicity, sister chromatid exchange, and chromosomal aberrations; other studies involved formation of micronuclei and measurements of urinary thioethers. The studies had small sample sizes, and the methods were qualitative, nonspecific, subject to many confounders, and possibly not sensitive enough to detect most occupational exposures. Since none of the currently available biological and analytical methods is sufficiently reliable or reproducible for routine monitoring of exposure in the workplace, further studies using these methods are not recommended; efforts should focus instead on wide-spread implementation of improved practices for handling cytotoxic drugs.

Review, Academic↗
NASA NTRS2006

Potential Alternatives Report for Validation of Alternative Low-Emission Surface PreparationlDepainting Technologies for Structural Steel

For this project, particulates and solvents used during the depainting process of steel structures were the identified hazardous material (HazMat) targeted for elimination or reduction. This Potential Alternatives Report (PAR) provides technical analyses of identified alternatives to the current coating removal processes, criteria used to select alternatives for further analysis, and a list of those alternatives recommended for testing. The initial coating removal alternatives list was compiled using literature searches and center participant recommendations. The involved project participants initially considered fifteen (15) alternatives. In late 2004, stakeholders down-selected the list and identified specific processes as potential alternatives to the current depainting methods. The selected alternatives were: 1. Plastic Blast Media 2. Hard Abrasive Media 3. Sponge Blast Media 4. Mechanical Removal with Vacuum Attachment 5. Liquid Nitrogen 6. Laser Coating Removal Available information about these processes was used to analyze the technical merits and the potential environmental, safety, and occupational health (ESOH) impacts of these methods. A preliminary cost benefit analysis will be performed to determine if implementation of alternative technologies is economically justified. NASA AP2

Lewis, Pattie↗
NASA NTRS2017

Oculomotor Behavior Metrics Change According to Circadian Phase and Time Awake

There is a need for non-invasive, objective measures to forecast performance impairment arising from sleep loss and circadian misalignment, particularly in safety-sensitive occupations. Eye-tracking devices have been used in some operational scenarios, but such devices typically focus on eyelid closures and slow rolling eye movements and are susceptible to the intrusion of head movement artifacts. We hypothesized that an expanded suite of oculomotor behavior metrics, collected during a visual tracking task, would change according to circadian phase and time awake, and could be used as a marker of performance impairment.

sleep deprivation↗
NASA NTRSDate not supplied

Sleep Obtained by Cabin Crewmembers during a Long-haul Flight

Sleep loss and circadian disruption pose a significant risk in safety-sensitive occupations. In aviation, many studies have demonstrated how inflight rest locations influence alertness and performance among pilots, but few studies have evaluated cabin crew. The purpose of the present study was to evaluate sleep outcomes among cabin crewmembers sleeping in a bunk compared to a jump seat during one long-haul route. Thirty-one (6 male) cabin crewmembers (age M = 30, SD = +/-13) flew the same long-haul route (outbound and return) with a flight duration of 10:41 (± 0:14) hours. Participants were randomly assigned to fly on an aircraft with a bunk or a jump seat for their sleep opportunity. Participants wore an Actiwatch (Phillips-Respironics Spectrum) throughout the entire study and completed a sleep diary at bedtime and upon waking. During flight they completed a nap diary entering the start time of the inflight sleep (if any) and the duration. Sixty-five flights (32 outbound and 33 return) were included in the analyses. Seventy-seven percent of the flights had a bunk and 23% had a jump seat. Crewmembers obtained M = 146.46 (± 67.20) minutes of rest out of which they slept M = 125.33 (± 64.91) minutes in the bunk. While using the jump seat, crewmembers obtained M = 169.53 (± 133.30) minutes of rest out of which they slept M = 142.92 (± 149.72) minutes. When crewmembers slept in the bunk, sleep latency was shorter (M = 13.69 ± 12.64 minutes) and efficiency was better (M = 76.16 ± 16.09 %) compared to the jump seat (sleep onset: M = 16.77 ± 13.89 minutes; sleep efficiency: M = 60.64 ± 17.42 %). We found that cabin crewmembers slept for longer time when they used the jump seat. They fell asleep faster and their sleep efficiency was better when using the bunk compared to the jump seat. Further research is needed to understand how sleep quality and subsequent performance are influenced by sleep opportunity in a bunk compared to a jump seat.

cabin crew↗
NASA NTRSDate not supplied

Sleep Obtained by Cabin Crewmembers during a Long-haul Flight

Sleep loss and circadian disruption pose a significant risk in safety-sensitive occupations. In aviation, many studies have demonstrated how inflight rest locations influence alertness and performance among pilots, but few studies have evaluated cabin crew. The purpose of the present study was to evaluate sleep outcomes among cabin crewmembers sleeping in a bunk compared to a jump seat during one long-haul route. Thirty-one (6 male) cabin crewmembers (age M = 30, SD = +/-13) flew the same long-haul route (outbound and return) with a flight duration of 10:41 (± 0:14) hours. Participants were randomly assigned to fly on an aircraft with a bunk or a jump seat for their sleep opportunity. Participants wore an Actiwatch (Phillips-Respironics Spectrum) throughout the entire study and completed a sleep diary at bedtime and upon waking. During flight they completed a nap diary entering the start time of the inflight sleep (if any) and the duration. Sixty-five flights (32 outbound and 33 return) were included in the analyses. Seventy-seven percent of the flights had a bunk and 23% had a jump seat. Crewmembers obtained M = 146.46 (± 67.20) minutes of rest out of which they slept M = 125.33 (± 64.91) minutes in the bunk. While using the jump seat, crewmembers obtained M = 169.53 (± 133.30) minutes of rest out of which they slept M = 142.92 (± 149.72) minutes. When crewmembers slept in the bunk, sleep latency was shorter (M = 13.69 ± 12.64 minutes) and efficiency was better (M = 76.16 ± 16.09 %) compared to the jump seat (sleep onset: M = 16.77 ± 13.89 minutes; sleep efficiency: M = 60.64 ± 17.42 %). We found that cabin crewmembers slept for longer time when they used the jump seat. They fell asleep faster and their sleep efficiency was better when using the bunk compared to the jump seat. Further research is needed to understand how sleep quality and subsequent performance are influenced by sleep opportunity in a bunk compared to a jump seat.

cabin crewmembers↗
NASA NTRS2024

Measurements of Silicosis Factors in Lunar and Martian Simulants

Simulants are geologically complex materials that are developed to represent the physical and/or compositional characteristics of a planetary surface (e.g., a naturally occurring soil or regolith). There are dozens of commercially available simulants that have been developed over the years; each simulant exhibits unique physical, chemical, and mineralogical characteristics. Simulants are derived from either natural or synthetic sources (i.e., “feedstocks”) of glass, minerals, and rocks. These feedstock components are processed by crushing, pulverizing, melting, etc., and then combined in the appropriate proportions to represent a particular site, surface, or region (e.g., Lunar Highlands Regolith). The process of creating simulants therefore requires the mechanical breakdown and reincorporation of feedstock components which may contain crystalline silica minerals such as quartz, cristobalite, and tridymite. Certain crystalline silica particles of the respirable fraction (<10 μm in diameter) are of great concern; chronic and acute exposure to these respirable crystalline silica (RCS) can lead to permanent damage and scarring of lung tissue, incurable lung diseases (i.e., silicosis), lung cancer, COPD (chronic obstructive pulmonary disease), and kidney disease. Planetary simulants are used extensively as test materials in the in scientific and engineering communities (e.g., testing of dust mitigation technologies, in-situ resource utilization, rover mobility, hardware, soft goods etc.). As such, this assessment was developed to serve as a guide for simulant users, local Safety and Occupational Health professionals, and Industrial Hygienists to evaluate the risk of silicosis across a wide variety of Lunar and Martian simulants. The goal of these works is to ensure that those working with simulant can do so safely and with an informed understanding of potential health risks.

Lunar↗
NASA NTRSDate not supplied

Measurements of Silicosis Factors in Lunar and Martian Simulants

Simulants are geologically complex materials that are developed to represent the physical and/or compositional characteristics of a planetary surface (e.g., a naturally occurring soil or regolith). There are dozens of commercially available simulants that have been developed over the years; each simulant exhibits unique physical, chemical, and mineralogical characteristics. Simulants are derived from either natural or synthetic sources (i.e., “feedstocks”) of glass, minerals, and rocks. These feedstock components are processed by crushing, pulverizing, melting, etc., and then combined in the appropriate proportions to represent a particular site, surface, or region (e.g., Lunar Highlands Regolith). The process of creating simulants therefore requires the mechanical breakdown and reincorporation of feedstock components which may contain crystalline silica minerals such as quartz, cristobalite, and tridymite. Certain crystalline silica particles of the respirable fraction (<10 μm in diameter) are of great concern; chronic and acute exposure to these respirable crystalline silica (RCS) can lead to permanent damage and scarring of lung tissue, incurable lung diseases (i.e., silicosis), lung cancer, COPD (chronic obstructive pulmonary disease), and kidney disease. Planetary simulants are used extensively as test materials in the in scientific and engineering communities (e.g., testing of dust mitigation technologies, in-situ resource utilization, rover mobility, hardware, soft goods etc.). As such, this assessment was developed to serve as a guide for simulant users, local Safety and Occupational Health professionals, and Industrial Hygienists to evaluate the risk of silicosis across a wide variety of Lunar and Martian simulants. The goal of these works is to ensure that those working with simulant can do so safely and with an informed understanding of potential health risks.

Lunar↗
NASA NTRS2009

Occupant Protection Project for the Orion Crew Vehicle

This powerpoint presentation describes the occupant protection project for the Orion Crew Vehicle. Background information on the Orion Crew Vehicle along with comparisons of the Space Shuttle, Ares I, Ares V, Saturn V and Soyuz-FG are also described. The contents include: 1) Background and Overview; 2) Crew health and safety overview; 3) Occupant Protection project overview; and 4) Suit Element injury risk.

Gernhardt, Michael L.↗
NASA NTRS1995

The effects of Crew Resource Mangement (CRM) training in airline maintenance: Results following three years' experience

This report describes three years' evaluation of the effects of one airline's Crew Resources Management (CRM) training operation for maintenance. This evaluation focuses on the post-training attitudes of maintenance managers' and technical support professionals, their reported behaviors, and the safety, efficiency and dependable maintenance performance of their units. The results reveal a strong positive effect of the training. The overall program represents the use of CRM training as a long-term commitment to improving performance through effective communication at all levels in airline maintenance operations. The initial findings described in our previous progress reports are reinforced and elaborated here. The current results benefit from the entire pre-post training survey, which now represents total attendance of all managers and staff professionals. Additionally there are now full results from the two-month, six-month, and 12-month follow-up questionnaires, together with as many as 33 months of post-training performance data, using several indicators. In this present report, we examine participants' attitudes, their reported behaviors following the training, the performance of their work units, and the relationships among these variables. Attitudes include those measured immediately before and after the training as well as participants' attitudes months after their training. Performance includes measures, by work units, of on-time flight departures, on-schedule maintenance releases, occupational and aircraft safety, and efficient labor costs. We report changes in these performance measures following training, as well their relationships with the training participants' attitudes. Highlights of results from this training program include increased safety and improved costs associated with positive attitudes about the use of more assertive communication, and the improved management of stress. Improved on-time performance is also related to those improved attitudes, as well as favorable attitudes about participative management.

Taylor, J. C.↗
NASA NTRS1981

NASA: Biomedical applications team

The status of projects involving the adaptation of NASA technologies for medical purposes is reviewed. Devices for the measurement of joint deformation of arthritic hands, the development of an artificial pancreas, provision of an auditory signal to avert epileptic seizures, are described along with the control of medication levels, a compressed air tank to supply power for field dentistry, and an electroencephalogram monitor. The use of the Lixiscope as a portable fluoroscope, thermal laminates for hand and foot warmers for patients with Raynaud's syndrome, and the use of absorptive coatings for instruments for controlling medication levels are described. The applicability of occupation health and safety practices to industry, computerized patient scheduling, impregnation of the common facial tissue with an agent for killing respiratory viruses, commercial applications of anthropometric data, and multispectral image analysis of the skin as a diagnostic tool are reviewed.

Source record↗
NASA NTRS1994

Call sign intelligibility improvement using a spatial auditory display

A spatial auditory display was designed for separating the multiple communication channels usually heard over one ear to different virtual auditory positions. The single 19 foot rack mount device utilizes digital filtering algorithms to separate up to four communication channels. The filters use four different binaural transfer functions, synthesized from actual outer ear measurements, to impose localization cues on the incoming sound. Hardware design features include 'fail-safe' operation in the case of power loss, and microphone/headset interfaces to the mobile launch communication system in use at KSC. An experiment designed to verify the intelligibility advantage of the display used 130 different call signs taken from the communications protocol used at NASA KSC. A 6 to 7 dB intelligibility advantage was found when multiple channels were spatially displayed, compared to monaural listening. The findings suggest that the use of a spatial auditory display could enhance both occupational and operational safety and efficiency of NASA operations.

Begault, Durand R.↗
NASA NTRS1999

NASA Occupational Health Program FY98 Self-Assessment

The NASA Functional Management Review process requires that each NASA Center conduct self-assessments of each functional area. Self-Assessments were completed in June 1998 and results were presented during this conference session. During FY 97 NASA Occupational Health Assessment Team activities, a decision was made to refine the NASA Self-Assessment Process. NASA Centers were involved in the ISO registration process at that time and wanted to use the management systems approach to evaluate their occupational health programs. This approach appeared to be more consistent with NASA's management philosophy and would likely confer status needed by Senior Agency Management for the program. During FY 98 the Agency Occupational Health Program Office developed a revised self-assessment methodology based on the Occupational Health and Safety Management System developed by the American Industrial Hygiene Association. This process was distributed to NASA Centers in March 1998 and completed in June 1998. The Center Self Assessment data will provide an essential baseline on the status of OHP management processes at NASA Centers. That baseline will be presented to Enterprise Associate Administrators and DASHO on September 22, 1998 and used as a basis for discussion during FY 99 visits to NASA Centers. The process surfaced several key management system elements warranting further support from the Lead Center. Input and feedback from NASA Centers will be essential to defining and refining future self assessment efforts.

Brisbin, Steven G.↗
NASA NTRS2003

Metal Cutting Theory and Friction Stir Welding Tool Design

Friction Stir Welding (FSW) is a relatively new industrial process that was invented at The Weld Institute (TWI, United Kingdom) and patented in 1992 under research funded by in part by the National Aeronautics and Space Administration (NASA). Often quoted advantages of the process include good strength and ductility along with minimization of residual stress and distortion. Less well advertised are the beneficial effects of this solid state welding process in the field of occupational and environmental safety. It produces superior weld products in difficult to weld materials without producing any toxic fumes or solid waste that must be controlled as hazardous waste. In fact, it reduces noise pollution in the workspace as well. In the early days of FSW, most welding was performed on modified machine tools, in particular on milling machines with modified milling cutters. In spite of the obvious milling heritage of the process, the techniques and lessons learned from almost 250 years of successful metalworking with milling machines have not been applied in the field of modern Friction Stir Welding. The goal of the current research was to study currently successful FSW tools and parameterize the process in such a way that the design of new tools for new materials could be accelerated. Along the way, several successful new tooling designs were developed for current issues at the Marshall Space Flight Center with accompanying patent disclosures

Payton, Lewis N.↗
NASA NTRSDate not supplied

Continued Environmental Microbiology Monitoring of The International Space Station (ISS) Veggie Unit Used for In-Flight, Crop-Based Food Systems

The International Space Station is a closed environment where rotating sets of Crewmembers live and work. This environment is monitored to ensure occupants’ health and safety during their spaceflight residency by routine Environmental Health System (EHS) collection of microbial samples including air, surface, and water. The microbial samples are collected, enumerated, and analyzed quarterly to monitor on-board system contamination and potential risks to crew health. Quarterly monitoring of the microorganisms in the ISS environment supports crew safety and contributes to a large set of microbial concentration and diversity data. The current in-inflight microbial requirements were developed using this historical data collected by the routine environmental monitoring. These in-flight microbial requirements have been established to maintain the health and safety of the spacecraft environment. This study leverages quarterly operational EHS sampling by collecting additional microbial samples from the surface of the Veggie plant production system on ISS. These samples will yield microbial concentration and diversity that can be compared and analyzed with nominal surface samples from the vehicle. The data collected in this study will aid in the development of requirements for spaceflight-based food production systems. Continued surface sampling of the internal and external surfaces of the Veggie system, along with collaboration from both Johnson Space Center (JSC) & Kennedy Space Center (KSC) scientists studying the microbiome of the veggie-crop systems, will be implemented as part of the future development of crop-based food system requirements for the ISS and beyond.

Christian Mena↗
NASA NTRS1967

Radiography. Volume 2 - Radiation safety

Radiation measurement techniques and devices, occupational and other dosages, personnel protection, and other aspects of radiation safety - programmed text on nondestructive tests

Source record↗