Search NASA⌕ Search

SEARCH · Search NASA

Results for “ONBOARD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Onboard Navigation Error Analysis for Aerocapture at Uranus

Capturing into an orbit around Uranus using aerocapture allows one to design a mission with faster interplanetary trajectories and less propellant requirements. Such an aerocapture mission would rely on the onboard Guidance, Navigation, and Control (GNC) subsystems to successfully capture into an orbit around Uranus. Uncertainty in the state information and the noise in the sensor measurements induce navigation errors in the guidance and control subsystems, which can affect the overall performance of the aerocapture mission at Uranus. Understanding the effect of these navigation errors on mission performance is essential. To this end, this work considers different sensors with varying quality to understand their impact on the overall mission performance. In addition, this paper studies the impact of the uncertainty in the initial states used to initialize the onboard navigation filter and understands their effect on mission performance. This paper also shows the onboard navigation errors obtained from the Linear Covariance (LinCov) analysis and uses them for verification and validation (V\&V) of the results from Program to Optimize and Simulate Trajectories-II (POST2).

Aerocapture↗
DOE OSTI2025

Diagnostic-free onboard battery health assessment

Diverse usage patterns induce complex and variable aging behaviors in lithiumion batteries, complicating accurate health diagnosis and prognosis. Separate diagnostic cycles are often used to untangle the battery’s current state of health from prior complex aging patterns. However, these same diagnostic cycles alter the battery’s degradation trajectory, are time-intensive, and cannot be practically performed in onboard applications. Here, in this work, we leverage portions of operational measurements in combination with an interpretable machine learning model to enable rapid, onboard battery health diagnostics and prognostics without offline diagnostic testing and the requirement of historical data. We integrate mechanistic constraints within an encoder-decoder architecture to extract electrode states in a physically interpretable latent space and enable improved reconstruction of the degradation path. The health diagnosis model framework can be flexibly applied across diverse application interests with slight fine-tuning.

battery aging reconstruction↗
NASA NTRS2008

Results from Automated Cloud and Dust Devil Detection Onboard the MER

We describe a new capability to automatically detect dust devils and clouds in imagery onboard rovers, enabling downlink of just the images with the targets or only portions of the images containing the targets. Previously, the MER rovers conducted campaigns to image dust devils and clouds by commanding a set of images be collected at fixed times and downloading the entire image set. By increasing the efficiency of the campaigns, more campaigns can be executed. Software for these new capabilities was developed, tested, integrated, uploaded, and operationally checked out on both rovers as part of the R9.2 software upgrade. In April 2007 on Sol 1147 a dust devil was automatically detected onboard the Spirit rover for the first time. We discuss the operational usage of the capability and present initial dust devil results showing how this preliminary application has demonstrated the feasibility and potential benefits of the approach.

dust devils↗
NASA NTRS1993

Use of Data from the AVIRIS Onboard Calibrator

The AVIRIS onboard calibrator became operational in 1992. This subsystem on the AVIRIS sensor has operated nominally throughout the 1992 and 1993 flight season. This paper describes the data measured by the onboard calibration and the two primary uses of these data.

AVIRIS↗
DOE OSTI2025

Outflowing photoionized plasma in Circinus X-1 using the high-resolution X-ray spectrometer Resolve onboard XRISM and the radiative transfer code cloudy

High-resolution X-ray spectroscopy is a key to understanding the mass inflow and outflow of compact objects. Spectral lines carry information about the ionization, density, and velocity structures through their intensity ratios and profiles. They are formed in non-local thermodynamic equilibrium conditions under the intense radiation field from the compact objects; thus radiative transfer (RT) calculation is a requisite for proper interpretations. We present such a study for a low-mass X-ray binary, Circinus X-1, from which the P Cygni profile was discovered using the X-ray grating spectrometer onboard Chandra. We observed the source using the X-ray microcalorimeter onboard XRISM at an orbital phase of 0.93–0.97 and revealed many spectral features unidentified before: the higher series transitions ($n{\rightarrow }1$; $n>2$) of highly ionized (H- and He-like) S, Ca, Ar, and Fe in emission and absorption, the Fe K$\alpha$ and K$\beta$ inner-shell excitation absorption of mildly ionized (O- to Li-like) Fe, and resolved fine-structure level transitions in the Fe Ly$\alpha$ and He$\alpha$ complexes. They blend with each other at different velocity shifts on top of apparently variable continuum emission that changed its flux by an order of magnitude within a 70 ks telescope time. Despite such complexity in the observed spectra, most of them can be explained by a simple model consisting of the photoionized plasma outflowing at $\sim$300 km s$^{-1}$ and the variable blocking material in the line of sight of the incident continuum emission from the accretion disk. We demonstrate this with the aid of the RT code cloudy for the line ratio diagnostics and spectral fitting. We further constrain the physical parameters of the outflow and argue that the outflow is launched close to the outer edge of the accretion disk and can be driven radiatively by being assisted by the line force calculated using the RT simulation.

X-rays: binaries↗
DOE OSTI2025

Optimization of X-ray event screening using ground and in-orbit data for the Resolve instrument onboard the XRISM satellite

The X-Ray Imaging and Spectroscopy Mission (XRISM) satellite was successfully launched and put into a low-Earth orbit on September 6, 2023 (UT). The Resolve instrument onboard XRISM hosts an X-ray microcalorimeter detector, which was designed to achieve a high-resolution ( ≤ 7 eV FWHM at 6 keV), high-throughput, and non-dispersive spectroscopy over a wide energy range. It also excels in a low background with a requirement of < 2 × 10 -3 s -1 keV -1 (0.3 to 12.0 keV), which is equivalent to only one background event per spectral bin per 100-ks exposure. Event screening to discriminate X-ray events from background is a key to meeting the requirement. We present the result of the Resolve event screening using data sets recorded on the ground and in orbit based on the heritage of the preceding X-ray microcalorimeter missions, in particular, the Soft X-ray Spectrometer onboard ASTRO-H. We optimize and evaluate 19 screening items of three types based on (1) the event pulse shape, (2) relative arrival times among multiple events, and (3) good time intervals. We show that the initial screening, which is applied for science data products in the performance verification phase, reduces the background rate to 1.8 × 10 -3 s -1 keV -1 meeting the requirement. We further evaluate the additional screening utilizing the correlation among some pulse shape properties of X-ray events and show that it further reduces the background rate, particularly in the < 2 keV band. Over 0.3 to 12 keV, the background rate becomes 1.0 × 10 -3 s -1 keV -1 .

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Oxygenate Onboard Separation for Octane-on-Demand

This project further examines the use of Self-Assembled Monolayers on Mesoporous Supports ® SAMMS ® -based sorbent materials as a sorbent for alcohols from alcohol-gasoline blends in the context of an onboard separation approach for use in an octane-on-demand strategy. Several questions were posed by potential industry collaborators seeking to better understand how the SAMMS®-based materials would perform in a more realistic environment. Several conclusions can be made from the work conducted here, with the caveat that these experiments do not represent the results that would be obtained from continuous or long-term use of the sorbent, because of the short duration of the project. Vigorous extractions into warm gasoline did not reveal the presence of additional species in gas chromatographic analysis. Vibration testing for up to eight hours under aggressive conditions did not show particle attrition. Thermal desorption experiments showed that the SAMMS ® have a higher capacity for methanol, approximately 50 weight-percent of the sorbent, than for ethanol, approximately 20 weight-percent of the sorbent, and that the methanol is easier to extract. Testing of the A20 fuel blends was insufficient and requires a slightly more sophisticated approach than was attempted here. Additionally, further work would be needed to assess the rate at which the alcohol is absorbed into the sorbent. The testing conducted here suggests that equilibrium is reached in well under an hour. While this study provides additional insights into the use of SAMMS®-based sorbent materials for onboard alcohol separation, there is room for further work employing a benchtop testing apparatus similar to that described herein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Equalizing the Pixel Response of the Imaging Photoelectric Polarimeter Onboard the IXPE Mission

The Gas Pixel Detector is a gas detector, sensitive to the polarization of X-rays, currently flying onboard the Imaging X-ray Polarimetry Explorer (IXPE)—the first observatory dedicated to X-ray polarimetry. It detects X-rays and their polarization by imaging the ionization tracks generated by photoelectrons absorbed in the sensitive volume, and then reconstructing the initial direction of the photoelectrons. The primary ionization charge is multiplied and ultimately collected on a finely pixellated ASIC specifically developed for X-ray polarimetry. The signal of individual pixels is processed independently and gain variations can be substantial, of the order of 20%. Such variations need to be equalized to correctly reconstruct the track shape, and therefore its polarization direction. The method to do such equalization is presented here and is based on the comparison between the mean charge of a pixel with respect to the other pixels for equivalent events. The method is shown to finely equalize the response of the detectors onboard IXPE, allowing a better track reconstruction and energy resolution, and can in principle be applied to any imaging detector based on tracks.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1971

A guide to onboard checkout. Volume 1: Guidance, navigation and control

The results are presented of a study of onboard checkout techniques, as they relate to space station subsystems, as a guide to those who may need to implement onboard checkout in similar subsystems. Guidance, navigation, and control subsystems, and their reliability and failure analyses are presented. Software and testing procedures are also given.

Source record↗
NASA NTRS1972

Comparison of two sensors for outer planet mission onboard navigation.

Onboard instruments have been shown to be an effective aid to navigation on missions to the outer planets. The relationship of two possible candidate navigation instruments, an image tube (television) and a scanning photometer, with other systems such as data processing and attitude control is discussed. Certain key problem areas relating to the design of each sensor are considered, and the scientific uses of each sensor are examined. The navigational efficacy of both instruments is illustrated by some selected results from a navigation and guidance simulation of outer planet missions. It is concluded that both devices are viable alternatives for onboard outer planet navigation.

Malchow, H. L.↗
NASA NTRS1973

The onboard processor on OAO-3

The onboard data processor for OAO 3 flight applications executes instructions at the rate of 2 1/2 billion per day. The computer commands, processes data, and controls telemetry subsystem programs onboard the spacecraft.

Taylor, T. D.↗
NASA NTRS1973

Functional requirements for onboard management of space shuttle consumables, volume 2.

A study was conducted to develop the functional requirements for onboard management of space shuttle consumables. A specific consumables management concept for the space shuttle vehicle was developed and the functional requirements for the onboard portion of the concept were generated. Consumables management is the process of controlling or influencing the usage of expendable materials involved in vehicle subsystem operation. The subsystems considered in the study are: (1) propulsion, (2) power generation, and (3) environmental and life support.

Graf, P. J.↗
NASA NTRS1975

Space vehicle onboard command encoder

A flexible onboard encoder system was designed for the space shuttle. The following areas were covered: (1) implementation of the encoder design into hardware to demonstrate the various encoding algorithms/code formats, (2) modulation techniques in a single hardware package to maintain comparable reliability and link integrity of the existing link systems and to integrate the various techniques into a single design using current technology. The primary function of the command encoder is to accept input commands, generated either locally onboard the space shuttle or remotely from the ground, format and encode the commands in accordance with the payload input requirements and appropriately modulate a subcarrier for transmission by the baseband RF modulator. The following information was provided: command encoder system design, brassboard hardware design, test set hardware and system packaging, and software.

Source record↗
NASA NTRS1976

Onboard Experiment Data Support Facility (OEDSF): Conceptual design study

The Onboard Experimental Data Support Facility (OEDSF) is an inflight data processor based on a totally new architecture specifically developed to cost-effectively process the data of Shuttle payloads sensors. Processing data onboard fills the following needs: (1) reduction of data bulk by conversion to information (2)quick-look for evaluation, interactive operation, etc. (3) real-time computation of engineering representation of sensed phenomena. For example: Value of backscatter coefficient (sigma) of a scatterometer as a function of latitude and longitude (4) exploitation of the real-time availability of ancillary data, thereby obviating the need for time-tagging, recording, and recorrelation and (5) providing data or information immediately usable by the experimenter or user. The OEDSF is made up of modular and cascadable matrix processors. Each matrix has been sized to process the data of a full typical shuttle payload. Cost analyses indicate that significant savings are realized by processing data with the OEDSF compared with conventional ground facilities.

Source record↗
NASA NTRS1978

Real-time SAR image processing onboard a Venus orbiting spacecraft

The potential use of real-time synthetic aperture radar (SAR) processing to produce 200 meter resolution imagery onboard a 1983 Venus orbiter imaging radar spacecraft is described. The VOIR SAR processing requirements are defined in terms of a nominal baseline design evolving from a 1977 VOIR mission study. A candidate onboard SAR processor architecture compatible with the VOIR requirements is next detailed. Finally, implementation characteristics, based upon currently available integrated circuits, are estimated in terms of chip count, power, and weight.

Arens, W. E.↗
NASA NTRS1977

Onboard magnetic field modeling for Solar Maximum Mission /SMM/

Analysis and simulation results are presented for magnetic field models for use in attitude acquisition onboard Solar Maximum Mission (SMM). A study was made of the degree of the spherical harmonic expansion of the magnetic field required, considering mission requirements, modeling errors, and magnetometer quantization and biases. It is shown that a fifth-degree field is sufficient to provide two-degree roll angle determination accuracy with a residual magnetic bias of 10 milligauss. Also, a spherical harmonic expansion for the McIlwain L-parameter is included for the first time. This parameter will be telemetered to ground with experimental data. The fifth-degree expansion will provide the L-parameter to within two percent of accepted values. The additional onboard computational burden is the storage of 36 coefficients and an increase of about 15% in computation time. Prototype flight code was developed which is anticipated to require about 2000 bytes of core storage and 30 milliseconds of computation time per orbit point on the NSSC-1 computer.

Headrick, R. D.↗
NASA NTRS1979

Onboard Navigation Systems Characteristics

The space shuttle onboard navigation systems characteristics are described. A standard source of equations and numerical data for use in error analyses and mission simulations related to space shuttle development is reported. The sensor characteristics described are used for shuttle onboard navigation performance assessment. The use of complete models in the studies depend on the analyses to be performed, the capabilities of the computer programs, and the availability of computer resources.

Source record↗