Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxide Reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Salt mass determination by 22 Na-based radioactive tracer dilution of a highly radioactive molten salt system for pyroprocessing spent oxide nuclear fuels

To demonstrate the feasibility of the 22 Na-based radioactive tracer dilution (RTD) for determining the total salt mass in a 60-kg oxide reduction (OR) system at Idaho National Laboratory (INL) for pyroprocessing spent oxide nuclear fuels, a LiCl- 22 NaCl tracer salt was prepared and spiked to the OR vessel, and salt samples were analyzed by gamma spectroscopy. Due to the high radioactivity (around 10 mCi/g) of the OR salt, mainly from 137 Cs, traditional gamma spectroscopy methods, which typically involve diluted salt samples, was not effective for analyzing the RTD samples. Since the 22 Na tracer radioactivity was very low, undiluted samples were necessary to detect the small amount of 22 Na tracer. Here, despite the high gamma radioactivity of the OR salt, increasing the detector-sample distance from 20 cm to 40 cm during gamma spectroscopy allowed the detection of radioactivity as low as 0.12 µCi/g 22 Na. The preparation of the 22 NaCl-LiCl tracer salt suitable for spiking into the OR salt was successful, and the mass determined by RTD was consistent with that estimated by salt level measurement. Therefore, the 22 Na-based RTD technique for total mass determination of the 60-kg molten salt system for OR is feasible, though more development work, particularly in the improving the uncertainty, is needed .

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Robust measurement of microbial reduction of graphene oxide nanoparticles using image analysis

ABSTRACT Shewanella oneidensis ( S. oneidensis ) has the capacity to reduce electron acceptors within a medium and is thus used frequently in microbial fuel generation, pollutant breakdown, and nanoparticle fabrication. Microbial fuel setups, however, often require costly or labor-intensive components, thus making optimization of their performance onerous. For rapid optimization of setup conditions, a model reduction assay can be employed to allow simultaneous, large-scale experiments at lower cost and effort. Since S. oneidensis uses different extracellular electron transfer pathways depending on the electron acceptor, it is essential to use a reduction assay that mirrors the pathways employed in the microbial fuel system. For microbial fuel setups that use nanoparticles to stimulate electron transfer, reduction of graphene oxide provides a more accurate model than other commonly used assays as it is a bulk material that forms flocculates in solutions with a large ionic component. However, graphene oxide flocculates can interfere with traditional absorbance-based measurement techniques. This study introduces a novel image analysis method for quantifying graphene oxide reduction, showing improved performance and statistical accuracy over traditional methods. A comparative analysis shows that the image analysis method produces smaller errors between replicates and reveals more statistically significant differences between samples than traditional plate reader measurements under conditions causing graphene oxide flocculation. Image analysis can also detect reduction activity at earlier time points due to its use of larger solution volumes, enhancing color detection. These improvements in accuracy make image analysis a promising method for optimizing microbial fuel cells that use nanoparticles or bulk substrates. IMPORTANCE Shewanella oneidensis ( S. oneidensis ) is widely used in reduction processes such as microbial fuel generation due to its capacity to reduce electron acceptors. Often, these setups are labor-intensive to operate and require days to produce results, so use of a model assay would reduce the time and expenses needed for optimization. Our research developed a novel digital analysis method for analysis of graphene oxide flocculates that may be utilized as a model assay for reduction platforms featuring nanoparticles. Use of this model reduction assay will enable rapid optimization and drive improvements in the microbial fuel generation sector.

Bennett, Danielle T. (ORCID:0009000188748827)↗
DOE OSTI2024

Production of Carbon Nanomaterials and Sorbents from Domestic U.S. Coal (Final Report)

The main goal of this project was to produce high-value carbon nanomaterials and carbon sorbents from domestic coal resources in a cost-effective manner. Four types of domestic coal samples were processed through a combination of deashing, devolatilization, oxidation, reduction, and activation treatments to produce graphene oxide (GO), reduced graphene oxide (RGO), and activated carbon (AC). The precursors and developed materials were extensively characterized by various methods to investigate the impact of the coal feedstock type on the yield and quality of each product. A commercial graphite-based GO sample was included in the experimental work as the baseline material for comparison with the coal-based materials developed in this work. The performed work also included a technoeconomic analysis and cost estimation for a plant processing 20 tons/day coal, a market evaluation for the graphene materials, and a technology gap analysis. A simple process by concentrated nitric acid oxidation is used to oxidize coal precursors for the production of GO. Fine oxidized coal particles that were separated from larger oxidized coal particles had significantly higher oxygen contents and were identified as coal-based GO samples. Coarse oxidized coal particles were used as precursors for production of AC. Based on the Raman spectroscopy results, coal-based GO samples exhibited G and D bands similar to those of graphite-based GO samples. X-ray photoelectron spectroscopy revealed that coal-based GO samples had surface oxygen contents of ~26-35% that were higher than the oxygen contents of graphite-based GO samples. Larger particles of oxidized coal samples were activated under different conditions to produce high surface area functionalized AC. Prepared materials had surface areas exceeding 1,500 m 2 /g and pore volumes more than 1 cm 3 /g with different pore size distributions. Reduced graphene oxide samples were prepared by thermal reduction of both coal-based and graphite-based GO samples at 170-2800 ºC. Coal-based and graphite-based RGO samples exhibited similar carbon contents, Raman spectra, and XRD profiles. Heat treatment above 1500 ºC shifted RGO to synthetic graphite. Among anthracite, bituminous, subbituminous, and lignite coals tested, anthracite was the best precursor to produce carbon nanomaterials exhibiting properties similar to those of graphite-based materials. Anthracite-based carbon nanomaterials also had the highest production yields. Technoeconomic analysis estimated the production cost of GO and RGO for anthracite-based samples at about 2,600 and 4,200 $/ton, respectively, which is about two orders of magnitude lower than the current estimated price of graphite-based materials. Several gaps to further develop the proposed technology were identified and discussed that include process and equipment optimization, process integration, need for additional bench- and pilot-scale experiments, and other items to reduce the scale up risk. Market analysis reports suggested a compound annual growth rate of 40% for graphene and related materials. Short-term applications include composites, inks, and coatings. However, energy storage applications appear to be the dominant potential long-term applications. Different applications of coal-based GO and RGO need to be explored and clear metrics and standards for each application need to be developed.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Application of Cyclic Voltammetry with W Electrodes for Measurement of High CaO Concentration in Molten CaCl 2

Molten CaCl 2 is a useful electrolyte for certain pyroprocessing techniques, and the solubility of oxide ions in this salt is a critical characteristic of many of these techniques. CaO is a byproduct of direct oxide reduction (DOR), so the concentration of oxide ions can be used to determine the extent of these reactions. Using cyclic voltammetry (CV) with tungsten electrodes, the CaO concentration in the salt up to approximately 5 wt% was correlated to both oxidation peak height and power density values. This correlation was demonstrated in both equilibrium and transient conditions. CV is a promising method for the in situ real-time monitoring of CaO concentrations in DOR processes.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Experimental demonstration of high-temperature (>1000 °C) heat extraction from a moving-bed oxidation reactor for thermochemical energy storage

Previously developed reduction-oxidation (redox) thermochemical energy storage technologies must store their products at high temperatures, complicating handling and transportation. This work describes a countercurrent, tubular, moving bed oxidation reactor at laboratory scale that produces high grade heat and allows solids to enter and exit the system at ambient temperatures. The particles implemented in the system consist of a novel magnesium manganese-oxide material well-suited for thermochemical energy storage. Output heat is obtained via a separate extraction gas flow, which exits from the middle portion of the main reactor tube. With this design, reactor temperatures in excess of 1000°C and extraction temperatures above 950°C were achieved. Deviation between the two measurements is a result of extraction thermocouple placement and losses in the reactor extraction arm; improvements to these parameters would bring the extraction temperature closer to the bed temperature. The reactor produces enough energy via oxidation to sustain both heat extraction and continued chemical reaction. During one representative steady state experiment at a particle flow rate of 1.5 g/s, an average of 447 W was extracted from the reactor out of an estimated 1083 W of released chemical energy for a duration of 70 minutes. Among the four experiments, the maximum bench-scale oxidation reactor energy efficiency of 36.2% and corresponding round-trip efficiency of 13.7% considering both redox reactors were demonstrated. Characteristics of an ideal system are considered and future improvements are proposed.

25 ENERGY STORAGE↗
DOE OSTI2021

Fischer-Tropsch synthesis: Direct cobalt nitrate reduction of promoted Co/Al 2 O 3 catalysts

Direct reduction of cobalt nitrate versus conventional calcination/reduction treatment was conducted using alumina with identical methodology as previously applied to SiO 2 and TiO 2 . Similar BET surface areas, pore volumes and pore size distributions were obtained for the activated calcined and uncalcined catalysts indicating no significant difference on morphological properties. However, the reducibility slightly increases and Co crystallite size is smaller for activated uncalcined samples. Reduction phenomena were analyzed by TPR-MS and TPR-EXAFS/XANES. Combining these techniques allows an explanation of the complex phenomena occurring during the direct reduction of cobalt nitrate, as both nitrate decomposition and cobalt oxide reduction are involved. Cobalt nitrate species are converted to CoO x intermediates. These species are oxidized by NO X (from nitrate decomposition) to Co 3 O 4 spinel, which is converted to CoO prior to Co 0 formation. Noble metals (Pt, Re, Ru and Ag) improve cobalt oxide reducibility, especially for the final reduction step (i.e., CoO to Co 0 ). The effect of direct nitrate reduction on FT activity was investigated using a 1 L CSTR. Activated unpromoted and Pt-promoted uncalcined catalysts achieved higher initial and steady-state CO conversions in comparison to the corresponding calcined catalysts. The best performance was achieved with direct reduction of uncalcined 0.5%Pt-25%Co/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tuning Optical and Electrical Properties of Vanadium Oxide with Topochemical Reduction and Substitutional Tin

Vanadium oxides are widely tunable materials, with many thermodynamically stable phases suitable for applications spanning catalysis to neuromorphic computing. The stability of vanadium in a range of oxidation states enables mixed-valence polymorphs of kinetically accessible metastable materials. Low-temperature synthetic routes to, and the properties of, these metastable materials are poorly understood and may unlock new optoelectronic and magnetic functionalities for expanded applications. In this work, we demonstrate topochemical reduction of α-V 2 O 5 to produce metastable vanadium oxide phases with tunable oxygen vacancies (>6%) and simultaneous substitutional tin incorporation (>3.5%). The chemistry is carried out at low temperature (65 °C) with solution-phase SnCl 2 , where Sn 2+ is oxidized to Sn 4+ as V 5+ sites are reduced to V 4+ during oxygen vacancy formation. Despite high oxygen vacancy and tin concentrations, the transformations are topochemical in that the symmetry of the parent crystal remains intact, although the unit cell expands. Band structure calculations show that these vacancies contribute electrons to the lattice, whereas substitutional tin contributes holes, yielding a compensation doping effect and control over the electronic properties. The SnCl 2 redox chemistry is effective on both solution-processed V 2 O 5 nanoparticle inks and mesoporous films cast from untreated inks, enabling versatile routes toward functional films with tunable optical and electronic properties. The electrical conductance rises concomitantly with the SnCl 2 concentration and treatment time, indicating a net increase in density of free electrons in the host lattice. This work provides a valuable demonstration of kinetic tailoring of electronic properties of vanadium–oxygen systems through top-down chemical manipulation from known thermodynamic phases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Characterization of Oxygen Anode Film Studies

Annual report on the Anode Films project. The objectives of this project are to: * Characterize the films that develop on the anode during electrolytic oxide reduction (OR) of UO2 fuel * Develop operando methods to remove these films and preclude their formation

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Development of Industrial Scale Rare Earth Master Alloys from Their Native Oxides for Magnet Production

The objective of the project is to develop an energy-efficient, reduced cost, and single-step critical metal oxide reduction and alloying methodology for the production of NdFeB and SmCo magnets to facilitate the establishment of a sustainable domestic critical materials supply chain. The method consists of an immiscible molten salt flux layer and a higher density molten metal alloy pool (FeB or Co). The rare earth (RE) oxide and a reductant are added to the molten salt layer, where the reductant first strips the oxygen from the rare earth oxide. Subsequently, the separated RE metal diffuses into the molten metal pool below, creating a RE-saturated master alloy. Towards this end, thermodynamic calculations of the reactions between RE oxides, metallic reducing agent, and molten salt bath chemistry have been performed, and the ideal feeds and conditions for extraction and diffusion to produce master alloys were established. Small-scale and scaled experimentation was performed to validate and optimize the feasibility of viable reactions, temperatures, and process conditions with regards to yield, composition, and process efficiency. Finally, full-scale experiments for the production of NdFeB and SmCo magnets were performed, and their performance characteristics were established.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Time-series dissolved oxygen, other bigeochemically-relevant analytes, and pressure gradients associated with the manuscript “Dissolved oxygen sensor in an automated hyporheic sampling system reveals biogeochemical dynamics”

This dataset contains time-series data from a vertical profile within the bed and banks of the Columbia river near Richland, WA. Water was sampled through 3 small tubes embedded in the sediment at 50,100, and 200 cm below the sediment-water interface. The goal of this study was to observe the correlations between hydraulic drivers and biogeochemical responses. The results of this study are published in the manuscript “Dissolved oxygen sensor in an automated hyporheic sampling system reveals biogeochemical dynamics”. The file types included in the data package are all time-series spreadsheet data, including hydraulic head gradients, physical parameters (temperature, pressure, SpC (specific conductivity)), and biogeochemical parameters (dissolved oxygen, pH, NO3 (nitrate) and ORP (oxidation-reduction potential)).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Red-Ox Robust SOFC Stacks for Affordable, Reliable Distributed Generation Power Systems

While SOFC systems are expected to operate reliably and with limited degradation in steady state or transient performance, SOFC stacks may ultimately fail due to the loss of structural integrity of one or several of the cells as a result of the weakening of the materials and interfaces due to physico-chemical changes that occur during continuous operation as a result of plastic and creep deformations, modification of the temperature profile, and/or degradation of the electrochemical performance of the cells. Degradation mechanisms originating from the cell components include coarsening of the microstructure over time; decomposition of materials; chemical reaction of electrode materials with electrolyte at the interface; delamination from each other; and for the anode, coking and sulfur poisoning. Of all the reliability issues that may occur for SOFCs, the main limitation for Ni-based cermet anodes (e.g., NiO-YSZ) is the poor stability during reduction-oxidation (red-ox) cycling. This project was aimed at the development of ceramic anode SOFCs based on SFCM (SrFe0.2Co0.4Mo0.4O3), which is a conductive perovskite that is red-ox stable. Additionally, the project involved the development of a red-ox robust stack. Scale up of SFCM-based cells to a large format (10 cm by 10 cm) cell size was achieved as well as a maximum power density of 0.9 W/cm 2 at 600 °C (>0.6 W/cm 2 at 0.6 V). Up to a 10-cell stack was successfully assembled and demonstrated, and cells showed similar performance in reformed, pipeline natural gas as in hydrogen. Finally, a 3-cell stack was red-ox cycled without degradation for 40 cycles at ~600 °C.

03 NATURAL GAS↗
DOE OSTI2023

Ni/NiO Reference Electrode Potential Measurements in Molten CaCl 2 –CaO

A direct oxide reduction (DOR) process is used to reduce PuO 2 to Pu metal via Ca metal. Molten CaCl 2 is commonly used as the electrolyte for this reaction. As the DOR reaction proceeds, CaO accumulates in the salt and must be measured in real-time to know when the reaction has gone to completion. Open circuit potential (OCP) was measured in this report between a reference electrode consisting of Ni/NiO contained in a MgO tube and a tungsten working electrode. Two methods of CaO additions were performed over several experiments, and both methods correlated to a 0.11 to 0.23 V decrease in OCP up to 14.4 wt% CaO. CaO concentrations were separately measured via sampling and acid-base titration. A plot of OCP versus concentration of CaO fits the Nernst equation with the CaO powder additions up to 5.2 wt% and also at the higher end of the CaO pellet concentration range. While the MgO tubes were observed to be structurally stable in the molten salt, scanning electron microscopy and energy dispersive X-ray spectroscopy showed that Mg in the tubes had been partially replaced with Ca.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photoelectrochemical Nitrogen Reduction to Ammonia on Cupric and Cuprous Oxide Photocathodes

Photoelectrochemical N 2 reduction enables the production of NH 3 under ambient conditions using water as the hydrogen source. Furthermore, by utilizing solar energy, photoelectrochemical N 2 reduction can significantly reduce the energy input required for N 2 reduction. In this study, photoelectrochemical N 2 production was investigated using CuO and Cu 2 O photocathodes that are known to be poorly catalytic for water reduction, the major reaction competing with N 2 reduction. When tested under simulated solar illumination with isotopically labeled 15 N 2 in 0.1 M KOH solution, the CuO and Cu 2 O photocathodes produced 15 NH 3 with a Faradaic efficiency of 17% and 20% at 0.6 V and 0.4 V vs. RHE, respectively. These potentials are significantly more positive than the thermodynamic reduction potential of N 2 , which demonstrates how the use of photoexcited electrons in the CuO and Cu 2 O photocathodes can reduce the energy input required for NH 3 production. Here, the use of photoexcited electrons in these photocathodes for N 2 reduction, water reduction, and photocorrosion was carefully examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Resolving dynamic mineral-organic interactions in the rhizosphere by combining in-situ microsensors with plant-soil reactive transport modeling

Associations between minerals and organic matter represent one of the most important carbon storage mechanisms in soils. Plant roots are major sources of soil carbon, and resolving the dynamics and dominance of microbial consumption versus mineral sorption of root-derived carbon is critical to understanding soil carbon storage. Here we integrate in-situ rhizosphere microsensor and plant physiological measurements with a 3-D plant-soil reactive transport model to explore the fate of dissolved organic carbon (DOC) in the rhizosphere, particularly its microbial consumption and interaction with Fe oxide minerals. Over several days, a microdialysis probe sampling pore water at the root-soil interface of growing Vicia faba roots in live soil, revealed clear diel patterns of DOC concentration. Daytime DOC spikes coincided with peaks in leaf-level photosynthesis rates and were accompanied by declining redox potential and dissolved oxygen as well as increasing pH in the rhizosphere. Incorporating microsensor data into our modeling framework showed that the measured rapid loss of DOC after each mid-day spike could not be explained by consumption via aerobic respiration, nor via anaerobic respiration dominated by Fe oxide reduction. Rather, in the model, a large fraction of rhizosphere DOC was rapidly immobilized each day by adsorption to Fe oxides. Further, modeled microbial Fe reduction (fueled by DOC) did not mobilize significant organic carbon from Fe oxides during the day. Instead, the model predicted equilibrium desorption of organic carbon from Fe oxides at night. This new mechanistic modeling framework, which couples aboveground plant physiological measurements with non-destructive high-resolution monitoring of rhizosphere processes, has great potential for exploring the dynamics and balance of the various microbial reactions and mineral interactions controlling carbon transformations and storage in soils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hydroxyls on CeO 2 Support Promoting CuO/CeO 2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. Here, in this study, we report the preparation and application of a novel CuO/CeO 2 catalyst using a hydroxyl-rich Ce(OH) x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO 2 support, the new CuO/CeO 2 catalyst prepared from the OH-rich Ce(OH) x (CuO/CeO 2 –OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO 2 support on the catalytic performance and physicochemical properties of the CuO/CeO 2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuO x dispersion on CeO 2 , increased the CuO x –CeO 2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO 2 –OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH) x is a superior support for the preparation of highly efficient metal catalysts for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Protein-based models offer mechanistic insight into complex nickel metalloenzymes

There are ten nickel enzymes found across biological systems, each with a distinct active site and reactivity that spans reductive, oxidative, and redox–neutral processes. We focus on the reductive enzymes, which catalyze reactions that are highly germane to the modern-day climate crisis: [NiFe] hydrogenase, carbon monoxide dehydrogenase, acetyl coenzyme A synthase, and methyl coenzyme M reductase. The current mechanistic understanding of each enzyme system is reviewed along with existing knowledge gaps, which are addressed through the development of protein-derived models, as described here. Finally, this opinion is intended to highlight the advantages of using robust protein scaffolds for modeling multiscale contributions to reactivity and inspire the development of novel artificial metalloenzymes for other small molecule transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Field Testing of Safeguards Technologies in the Hot Fuel Examination Facility

Recent developments in nuclear fuel reprocessing techniques have yielded more efficient processes and fuel cycle options that strengthen the nuclear industry and production of clean energy. One such area of interest is pyroprocessing of used oxide fuel. However, with these advances in the back end of the nuclear fuel cycle, advances in safeguards instrumentation, measurements, and approaches are needed to ensure special nuclear material (SNM) is accounted for according to regulatory requirements. As a high-level overview of a nominal pyroprocessing approach, used oxide fuel from commercial light water reactors (LWR) is mechanically removed from the metallic cladding. Then the fuel is crushed and randomized representative samples are taken and sent to an analytical lab for analysis. The analytical results of the feed material are used for input accountancy into the rest of the process. The crushed oxide fuel is then moved to the oxide reduction (OR) furnace where it is reduced from an oxide to metallic form. The OR product is distilled to remove salt and then moved to an electrorefiner (ER), where it is immersed in a eutectic mixture of lithium chloride potassium chloride (LiCl-KCl) that typically ranges between 450-550 ?. Within the ER, the usable uranium is electrochemically transported through the molten salt from the anode to the cathode, and then subsequently removed as a relatively pure U product.. A simplified model of pyroprocessing techniques with added emphasis on the safeguards can be seen below in Fig. 1

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Zero Valent Iron for Reductive Removal of Technetium-99 from Aqueous Sulfate Solutions - 20347

This research investigates the reductive removal of technetium-99 ({sup 99}Tc) by zero valent iron (ZVI) from low activity waste (LAW) off-gas condensate simulant as a secondary treatment after recovery from vitrification planned at the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Due to its high volatility, only a fraction of Tc{sup (VII)} will be incorporated into glass waste forms. Volatilized Tc will be captured by an off-gas treatment system with current plans to recycle off-gas condensate back to the vitrification facility. The scheme with off-gas recycling will increase Tc loading in the glass waste, but will also increase the concentrations of sulfate, halides, and other problematic constituents impeding overall LAW processing and increasing volume of the glass product. This study focuses on Tc{sup (VII)} removal by ZVI as a feasible pathway to minimize off-gas condensate recycling, which may result in a reduction in the volumes of LAW waste to be immobilized and subsequent cost savings. ZVI is an established treatment agent for redox-active contaminants such as trichloroethylene, nitrate, arsenic, chromium, phenol, and others. It is a commercially available and cost-effective material. Our previous experiments showed that ZVI is very efficient for the reductive removal of {sup 99}Tc. In this work we studied ZVI oxidation under aerobic conditions at pH 7 with 0.1 M Na{sub 2}SO{sub 4} solution (ionic strength, IS, 0.3 M) in the presence and absence of {sup 99}Tc. The concentration of {sup 99}Tc and the changes in pH, dissolved oxygen (DO), and oxidation-reduction potential (ORP) of the simulated solutions were monitored over 8 days. The formation of iron oxide phases was probed by X-ray diffraction (XRD). Obtained results suggest that ZVI contact time with {sup 99}Tc containing solutions for 6 hours resulted in nearly complete removal of {sup 99}Tc from the aqueous phase. XRD analysis showed that the oxidation of ZVI is rapid with formation of magnetite (Fe{sub 3}O{sub 4}) with minor percentage of goethite and maghemite. This work is a part of a larger set of studies investigating the feasibility of {sup 99}Tc reductive removal from the LAW off-gas condensate. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗