Search NASA⌕ Search

SEARCH · Search NASA

Results for “PEC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Barium Bismuth Niobate Double Perovskite/Tungsten Oxide Nanosheet Photoanode for High‐Performance Photoelectrochemical Water Splitting

Abstract Recently, a new method to effectively engineer the bandgap of barium bismuth niobate (BBNO) double perovskite was reported. However, the planar electrodes based on BBNO thin films show low photocurrent densities for water oxidation owing to their poor electrical conductivity. Here, it is reported that the photoelectrochemical (PEC) activity of BBNO‐based electrodes can be dramatically enhanced by coating thin BBNO layers on tungsten oxide (WO 3 ) nanosheets to solve the poor conductivity issue while maintaining strong light absorption. The PEC activity of BBNO/WO 3 nanosheet photoanodes can be further enhanced by applying Co 0.8 Mn 0.2 O x nanoparticles as a co‐catalyst. A photocurrent density of 6.02 mA cm −2 at 1.23 V (vs reversible hydrogen electrode (RHE)) is obtained using three optically stacked, but electrically parallel, BBNO/WO 3 nanosheet photoanodes. The BBNO/WO 3 nanosheet photoanodes also exhibit excellent stability in a high‐pH alkaline solution; the photoanodes demonstrate negligible photocurrent density decay while under continuous PEC operation for more than 7 h. This work suggests a viable approach to improve the PEC performance of BBNO absorber‐based devices.

Weng, Baicheng↗

Monolithic Photoelectrochemical CO 2 Reduction Producing Syngas at 10% Efficiency

We report increasing anthropogenic carbon dioxide emissions have prompted the search for photoelectrochemical (PEC) methods of converting CO 2 to useful commodity products, including fuels. Ideally, such PEC approaches will be sustained using only sunlight, water, and CO 2 as energetic and reactant inputs. However, low peak conversion efficiencies (< 5%) have made commercialization of fully-integrated PEC devices prohibitive. Here, a 4 cm 2 monolithic PEC device exceeding 10% solar-to-fuel efficiency with principal fuel products of carbon monoxide and hydrogen is reported. The corresponding solar-to-CO and solar-to-H 2 efficiencies are 7% and 3.5%, respectively. Screening of a range of operating conditions reveals a tunable product mixture of H 2 and CO using a gold electrocatalyst. Accordingly, it is shown that device optimization yields a H 2 -to-CO ratio of 1:2 commonly present in synthesis gas (syngas). Notably, the modularity and facile fabrication of this device permit the incorporation of a broad array of materials for various applications. For example, the electrocatalyst may easily be swapped to target a different set of products.

36 MATERIALS SCIENCE↗

Ag−Au‐Bimetal Incorporated ZnO‐Nanorods Photo‐Anodes for Efficient Photoelectrochemical Splitting of Water

Abstract Plasmonic Ag−Au/ZnO nanorods (ZNRs) based photo‐anodes were synthesized using a simple electrochemical route and were then evaluated for photoelectrochemical (PEC) activity. The amalgamation of Ag and Au nanoclusters broadens the UV‐Vis light absorption in the range of 400 nm to 650 nm. Ag−Au/ZNRs photo‐anodes had shown photocurrent density of ∼1.4 mA cm −2 , at a bias of 0.75 V/SCE, which is ∼3.1 times of bare ZNRs photo‐anode. Bi‐metallic Ag−Au/ZNRs based photo‐anode shows the maximum photo‐conversion efficiency of 0.77 % at 0.5 V/SCE, under one sun illumination. Formation of hot electrons in Ag−Au/ZNRs photo‐anodes can be partly held responsible for the enhanced PEC activity. Au/Ag core/shell morphology evolves when a thin layer of Ag is loaded on Au nanoparticles. For an in‐depth analysis on Ag−Au incorporated ZNRs based photo‐anodes and its PEC activity, a detailed characterization was carried out using physico‐chemical, spectral and microscopy techniques. The analysis shows that Au in direct contact with ZnO interacts mainly with oxygen vacancies present on surface of ZnO and Ag interacts with Au for an effective electron‐hole segregation process at their interface and electron storage occurs in metal nanoparticles. The results suggest bi‐metal incorporated ZNRs based photo‐anodes can be a prospective candidate for PEC water splitting application.

Sharma, Vidhika↗

Sb-Doped SnO 2 Nanorods Underlayer Effect to the α-Fe 2 O 3 Nanorods Sheathed with TiO 2 for Enhanced Photoelectrochemical Water Splitting

In this paper, a Sb-doped SnO 2 (ATO) nanorod underneath an α-Fe 2 O 3 nanorod sheathed with TiO 2 for photoelectrochemical (PEC) water splitting is reported. The experimental results, corroborated with theoretical analysis, demonstrate that the ATO nanorod underlayer effect on the α-Fe 2 O 3 nanorod sheathed with TiO 2 enhances the PEC water splitting performance. The growth of the well-defined ATO nanorods is reported as a conductive underlayer to improve α-Fe 2 O 3 PEC water oxidation performance. The α-Fe 2 O 3 nanorods grown on the ATO nanorods exhibit improved performance for PEC water oxidation compared to α-Fe 2 O 3 grown on flat fluorine-doped tin oxide glass. Furthermore, a simple and facile TiCl 4 chemical treatment further introduces TiO 2 passivation layer formation on the α-Fe 2 O 3 to reduce surface recombination. Finally, as a result, these unique nanostructures show dramatically improved photocurrent density (139% higher than that of the pure hematite nanorods).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A framework for understanding efficient diurnal CO 2 reduction using Si and GaAs photocathodes

Integrated solar fuels and photoelectrochemical (PEC) CO 2 reduction (CO 2 R) are promising pathways toward producing value-added chemicals from CO 2 . However, improvements are needed in activity and selectivity as well as in fundamental understanding of device behavior to engender wide deployment. Here, we report two single-junction, integrated photocathodes for PEC CO 2 R based on TOPCon Si and GaAs substrates, which achieve -10 mA cm -2 at -0.33 V vs. RHE with 41% selectivity to C 2+ products and at -0.03 V vs. RHE with 27% selectivity to C 2+ products, respectively. We investigated the viability of a light-mediated strategy to direct selectivity in buried-junction PEC devices and confirmed that these devices could be optimized independently and described by the physics-based models of the individual components. Finally, we designed a framework to assess operational modes for PEC CO 2 R devices and demonstrated this framework under continuous galvanostatic control and variable illumination conditions.

14 SOLAR ENERGY↗

Numerical electromagnetic frequency domain analysis with discrete exterior calculus

In this paper, we perform a numerical analysis in frequency domain for various electromagnetic problems based on discrete exterior calculus (DEC) with an arbitrary 2-D triangular or 3-D tetrahedral mesh. We formulate the governing equations in terms of DEC for 3-D and 2-D inhomogeneous structures, and also show that the charge continuity relation is naturally satisfied. Then we introduce a general construction for signed dual volume to incorporate material information and take into account the case when circumcenters fall outside triangles or tetrahedrons, which may lead to negative dual volume without Delaunay triangulation. Then we examine the boundary terms induced by the dual mesh and provide a systematical treatment of various boundary conditions, including perfect magnetic conductor (PMC), perfect electric conductor (PEC), Dirichlet, periodic, and absorbing boundary conditions (ABC) within this method. An excellent agreement is achieved through the numerical calculation of several problems, including homogeneous waveguides, microstructured fibers, photonic crystals, scattering by a 2-D PEC, and resonant cavities. - Highlights: • The formulation of 2D and 3D electromagnetic equations with DEC are presented. • Characteristic Hodge stars are constructed without well-centered triangulation or Delaunay triangulation. • Systematical treatment of various boundary conditions, including PMC, PEC, periodic, and absorbing boundary conditions. • Switching between E to H field can change PEC from essential boundary condition to natural boundary condition. • Quality factor of an open dielectric sphere is considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

All-vanadium photoelectrochemical storage cells using dye sensitized geometry-enhanced TiO{sub 2} nanobelts

Highlights: • Dye-sensitized photoelectrode using nanostructured anatase TiO{sub 2} nanobelts was studied in photoelectrochemical storage cells. • An intricate balance between a series of charge-transfer processes related to the dye sensitizer, redox species, and photoelectrode was discovered. • Under AM1.5 illumination rapid charge transfer in the 1D nanobelts enhances photocurrent. • Large specific surface area of the photoelectrode dominates the performance under visible light. - Abstract: Photoelectrochemical (PEC) devices, which use solar energy to drive charge transfer, have been considered as a low cost and effective approach to harvest energy from the sun. Dye sensitization designs are promising alternative to traditional semiconductor-based cells, as they can absorb a wide spectrum of light and provide free energy for PEC reactions. However, an intricate balance exists between a number of series charge-transfer processes related to the dye sensitizer, redox species, and photoelectrode. Here, we study a dye-sensitized photoelectrode using nanostructured anatase TiO{sub 2} nanobelts (TNBs) in the newly developed all-vanadium PEC storage cell (all-V PESC) to understand the performance dominating factor as well as to enhance photoexcitation and charge transfer, thus the solar energy storage efficiency. Preliminary results show enhanced photocurrent and reduced charge transfer resistance under AM1.5 illumination upon dye sensitization. Under visible light, however, large specific surface area of the photoelectrode seems to dominate the PEC performance.

36 MATERIALS SCIENCE↗

Employing overlayers to improve the performance of Cu 2 BaSnS 4 thin film based photoelectrochemical water reduction devices

Earth-abundant copper-barium-thiostannate Cu 2 BaSnS 4 (CBTS)-based thin films have recently been reported to exhibit the optoelectronic and defect properties suitable as absorbers for photoelectrochemical (PEC) water splitting and the top cell of tandem photovoltaic solar cells. However, the photocurrents of CBTS-based PEC devices are still much lower than the theoretical value, partially due to ineffective charge collection at CBTS/water interface and instability of CBTS in electrolytes. Here, we report on overcoming these issues by employing overlayer engineering. We find that CdS/ZnO/TiO 2 overlayers can significant-ly improve the PEC performance, achieving saturated cathodic photocurrents up to 7.8 mA cm -2 at the potential of -0.10 V versus reversible hydrogen electrode (RHE) in a neutral electrolyte solution, which is much higher than the best bare CBTS film attaining a photocurrent of 4.8 mA cm -2 at the potential of -0.2 V versus RHE. Finally, our results suggest a viable approach for improving the performance of CBTS-based PEC cells.

08 HYDROGEN↗

Wide Band Gap CuGa(S,Se) 2 Thin Films on Transparent Conductive Fluorinated Tin Oxide Substrates as Photocathode Candidates for Tandem Water Splitting Devices

Theaim of this report was to explore the potential of CuGa(S,Se)2 thin films as wide-E G top cell absorbers for photoelectrochemical (PEC) water splitting. A synthesis was developed on fluorinated tin oxide (FTO) photocathodes by converting copper-rich co-evaporated CuGaSe2 into CuGa(S,Se)2 via a post-deposition annealing. We found it necessary to first anneal CuGaSe2 at low-temperature in sulfur then at high-temperature in nitrogen to preserve the transparency and conductivity of the FTO. Using this two-step synthesis, we fabricated a 1.72eV CuGa(S,Se) 2 photocathode with a saturation current density and photocurrent onset potential of 10mA/cm 2 and -0.20V vs. RHE, respectively. Yet we found that the PEC performance and sub-E G transmittance, worsened with increasing copper content. Using flatband potential measurements and the Gerischer model, we show that divergences in PEC performance of CuGa(S,Se) 2 photocathodes can be explained by differences in conduction band minimums and Fermi levels. We also explain that sub-E G transmittance is likely hampered by a defect band 100-400 meV below E C . Additional external quantum efficiency measurements of a high-efficiency 1.1 eV Cu(In,Ga)Se 2 photovoltaic driver, while shaded by the CuGa(S,Se) 2 photocathode, yielded a short-circuit current density of 4.14 mA/cm 2 revealing that CuGa(S,Se) 2 reflects promise as a top cell for PEC water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single Nanoflake Photoelectrochemistry Reveals Intrananoflake Doping Heterogeneity That Explains Ensemble-Level Photoelectrochemical Behavior

Transition metal dichalcogenide (TMD) nanoflake thin films are attractive electrode materials for photoelectrochemical (PEC) solar energy conversion and sensing applications, but their photocurrent quantum yields are generally lower than those of bulk TMD electrodes. The poor PEC performance has been primarily attributed to enhanced charge carrier recombination at exposed defect and edge sites introduced by the exfoliation process. Here, a single nanoflake PEC approach reveals how an alternative effect, doping heterogeneity, limits ensemble-level PEC performance. Photocurrent mapping and local photocurrent–potential (i–E) measurements of MoS 2 nanoflakes exfoliated from naturally occurring bulk crystals revealed the presence of n- and p-type domains within the same nanoflake. Interestingly, the n- and p-type domains in the natural MoS 2 nanoflakes were equally efficient for iodide oxidation and tri-iodide reduction (IQE values exceed 80%). At the single domain-level, the natural MoS 2 nanoflakes were nearly as efficient as nanoflakes exfoliated from synthetic n-type MoS 2 crystals. Single domain-level i–E measurements explain why natural MoS 2 nanoflakes exhibit an n-type to p-type photocurrent switching effect in ensemble-level measurements: the n- and p-type diode currents from individual domains oppose each other upon illuminating the entire nanoflake, resulting in zero photocurrent at the switching potential. Furthermore, the doping heterogeneity effect is likely due to nonideal stoichiometry, where p-type domains are S-rich according to XPS measurements. Although this doping heterogeneity effect limits photoanode or photocathode performance, these findings open the possibility to synthesize efficient TMD nanoflake photocatalysts with well-defined lateral p- and n-type domains for enhanced charge separation.

14 SOLAR ENERGY↗

Temperature Effect on Photoelectrochemical Water Splitting: A Model Study Based on BiVO 4 Photoanodes

Photoelectrochemical (PEC) water splitting is typically studied at room temperature. In this work, the temperature effect on PEC water splitting is studied using crystalline BiVO4 thin film photoanode as a model system. Systematic temperature-dependent electrochemical study demonstrates that the PEC activity is boosted at elevated electrolyte temperatures and indicates that thermal energy plays a main role in improving charge carrier transport in the bulk of BiVO 4 . Irreversible surface reconstruction is observed after PEC reactions at elevated temperature in the presence of hole scavengers, with regularly spaced stripes emerging on BiVO4 grains. The surface-reconstructed photoanode exhibits up to 40% improvement in photocurrent densities and ~0.25 V shift of photocurrent onset to favorable direction. Detailed investigation shows the formation of amorphous layer without stoichiometric change at the reconstructed surface. Furthermore, this work provides insights of temperature effect on photoelectrode in solar water splitting and reveals the non-negligible effect of hole scavengers in photoelectrochemical measurement.

36 MATERIALS SCIENCE↗

Integrated Strategies for Overcoming Resolution Limits in Electron Beam Lithography of Chemically Amplified Resists

Electron beam lithography (EBL) of chemically amplified resists (CARs) faces fundamental challenges, including stochastic electron scattering and acid diffusion, that limit resolution and reproducibility. Using SU-8 as a model CAR, this study systematically investigated complementary strategies to address these challenges, combining multipass exposure, proximity effect correction (PEC) with midrange correction factors, base quencher incorporation, and post-exposure bake (PEB) suppression. Monte Carlo simulations and calibrated PEC modeling revealed that extending the point spread function to include a midrange scattering component significantly improved critical dimension (CD) control across varying pattern densities, correcting deviations that conventional two-term PEC failed to capture. Multipass exposure, particularly 4-pass writing with a 25% offset, redistributed the dose to average stochastic beam and scattering fluctuations, reducing line-width roughness by more than 50% and yielding more uniform nanoscale features. Photoacid confinement was investigated by adding urea as a base quencher, which successfully reduced acid diffusion but introduced substantial sensitivity penalties without improving ultimate resolution or Z-factor performance, underscoring the trade-offs of chemical versus physical confinement. Suppressing PEB most directly minimized acid diffusion, resulting in improved Z-factors and reproducible 30 nm half-pitch dense line/space patterns. Overall, these results demonstrated that PEC with midrange correction, multipass strategies, quencher additives, and PEB-free processing addresses different aspects of the EBL process window and that their integration provides a comprehensive framework for managing stochastic scattering, diffusion, and chemical amplification effects. This framework advances dense nanoscale patterning in CARs and establishes guiding principles for optimizing resist design and process strategies in high-resolution EBL and potentially other advanced lithographies, such as extreme ultraviolet (EUV) lithography.

36 MATERIALS SCIENCE↗

3D Printing of Polyelectrolyte Complex-Integrated Photocurable Hydrogel Resins

In this study, we developed a photocurable hydrogel resin incorporating a polyelectrolyte complex (PEC) for 3D printing. Acrylamide-based monomers were formulated with varying PEC contents (0–15 wt %) in an aqueous KBr medium to fabricate patterned porous hydrogel structures. The morphology of printed hydrogels was characterized by field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. Notably, the PEC5 and PEC10 formulations exhibited optimal thermal stability and compressive properties, attributed to the homogeneous distribution of PEC domains within the hydrogel matrix. Furthermore, dye adsorption experiments demonstrated excellent removal efficiency, highlighting the potential of PEC-containing hydrogels for environmental remediation applications, particularly in the treatment of dye-contaminated wastewater.

Yang, Jinchul [University of Tennesse Knoxville]↗

Hydrogen from Sunlight and Water: A Side-by-Side Comparison between Photoelectrochemical and Solar Thermochemical Water-Splitting

Photoelectrochemical (PEC) and solar thermochemical (STCH) water-splitting represent two promising pathways for direct solar hydrogen generation. PEC water-splitting integrates multiple functional materials and utilizes energetic electrons and holes generated from sunlight to produce hydrogen and oxygen in two half-reactions, while STCH water-splitting couples a series of consecutive chemical reactions and uses absorbed heat from sunlight to generate hydrogen and oxygen in two full reactions. In this Focus Review, the basic operating principles, sunlight utilization, device architecture, reactor design, instantaneous and annually averaged solar-to-hydrogen (STH) conversion efficiency, and the operating conditions and constraints of both pathways are compared. A side-by-side comparison addresses some common sources of confusion and misinterpretation, especially in the evaluation of STH conversion efficiencies, and reveals distinct features and challenges in both PEC and STCH technologies. Furthermore, this Focus Review also addresses materials and device challenges in PEC and STCH for cost-competitive hydrogen generation.

08 HYDROGEN↗

Establishing the Role of Operating Potential and Mass Transfer in Multicarbon Product Generation for Photoelectrochemical CO 2 Reduction Cells Using a Cu Catalyst

There is increasing interest in the possibility of photoelectrochemical (PEC) reduction of CO 2 to C 2+ products; however, the criteria for maximizing PEC solar-to-C 2+ (STC 2+ ) rates are not well understood. We report here a continuum-scale model of PEC CO 2 reduction (CO 2 R) on Cu in 0.1 M CsHCO 3 and use it to optimize the design and operating conditions for generating C 2+ products. Furthermore, we demonstrate that the potential-dependent product distribution of CO 2 R on Cu requires operating near the potential that maximizes C 2+ generation rates ($V$ id ), unlike PEC water splitting, which desires operation at the maximum photocurrent density. Because of this requirement, the criterion for a high STC 2+ rate includes high-photocurrent semiconductors with photovoltages near $V$ id and low series resistance. The STC 2+ rate in these systems is enhanced by optimal CO 2 transport and exhibits low sensitivity to dirunal solar irradiance variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interparticle Interactions in Dilute Solutions of Polyelectrolyte Complex Micelles.

The application of dilute solutions of poly electrolyte complex (PEC) micelles for delivering therapeutic nucleic acids into disease sites has gained momentum. This Letter reports a detailed characterization of PEC micelles in dilute solutions including their internal structures and the determination of the interparticle interactions. The polymer concentration ranges from 0.1 to 0.5 wt %, a regime where micelle-micelle interactions are infrequent. We employ synchrotron small-angle X-ray scattering (SAXS) to simultaneously probe the morphology, internal structure, and radius of gyration (R-g) of the self-assemblies formed by charged diblock polyelectrolytes and homopolyelectrolytes. The emerging appearance of the structure factor in SAXS profiles with the increasing polymer concentration demonstrates the presence of the repulsive intermicellar correlations, which is further confirmed by the differences between the "reciprocal R-g" estimated by Guinier approximation and the "real space R-g" determined by pair distribution functions. We find that the soft corona chains tethered on the surface of phase-separated complex domains are compressed when micelles come close to the point where a hard-sphere interaction takes over. These findings contribute to the fundamental understanding of the structure and space-filling constraints in the complexation-driven self-assemblies and advance the rational design of cationic polymer-based nonviral gene delivery vectors.

Wu, Hao↗

Perovskite-driven solar C 2 hydrocarbon synthesis from CO 2

Photoelectrochemistry (PEC) presents a direct pathway to solar fuel synthesis by integrating light absorption and catalysis into compact electrodes. Yet, PEC hydrocarbon production remains elusive due to high catalytic overpotentials and insufficient semiconductor photovoltage. Here we demonstrate ethane and ethylene synthesis by interfacing lead halide perovskite photoabsorbers with suitable copper nanoflower electrocatalysts. The resulting perovskite photocathodes attain a 9.8% Faradaic yield towards C 2 hydrocarbon production at 0 V against the reversible hydrogen electrode. The catalyst and perovskite geometric surface areas strongly influence C 2 photocathode selectivity, which indicates a role of local current density in product distribution. The thermodynamic limitations of water oxidation are overcome by coupling the photocathodes to Si nanowire photoanodes for glycerol oxidation. These unassisted perovskite–silicon PEC devices attain partial C 2 hydrocarbon photocurrent densities of 155 µA cm -2 , 200-fold higher than conventional perovskite–BiVO 4 artificial leaves for water and CO 2 splitting. These insights establish perovskite semiconductors as a versatile platform towards PEC multicarbon synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗