Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Solid phase stability of a double-minimum interaction potential system

We study phase stability of a system with double-minimum interaction potential in a wide range of parameters by a thermodynamic perturbation theory. The present double-minimum potential is the Lennard-Jones-Gauss potential, which has a Gaussian pocket as well as a standard Lennard-Jones minimum. As a function of the depth and position of the Gaussian pocket in the potential, we determine the coexistence pressure of crystals (fcc and bcc). We show that the fcc crystallizes even at zero pressure when the position of the Gaussian pocket is coincident with the first or third nearest neighbor site of the fcc crystal. The bcc crystal is more stable than the fcc crystal when the position of the Gaussian pocket is coincident with the second nearest neighbor sites of the bcc crystal. The stable crystal structure is determined by the position of the Gaussian pocket. These results show that we can control the stability of the solid phase by tuning the potential function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variation of γ′ Formers and Refractory Elements for Enhanced Creep resistance and Phase Stability of HAYNES® 282® Alloy

Modifications to the chemistry of alloy 282 were performed to improve the alloy’s resistance to long term creep deformation as well as phase stability. Alloys were prepared using vacuum induction melting, computationally optimized homogenization heat treatment and hot working. Phase stability studies were carried out for up to 5,000 hours at 800°C and 900°C while creep testing was performed at conditions leading to lives past 7,000 hours for temperatures ranging from 740°C to 900°C. The formation of σ and μ phases were reduced in the modified alloy. Atom probe tomography (APT) was performed on the specimens from the phase stability study to investigate changes in the elemental partitioning to the γ and γ′ phases. Post deformation microstructures were analyzed using EBSD and TEM to study the influence of the detrimental phases on damage accumulation during creep.

Detrois, Martin↗

Initial phase zone for phase locking to the resonance, using “main condition” of phase stability in DC-biased single-sided multipactor

In the present work, the concept of accurate phase stability is employed to study a DC-biased single-sided multipactor. A “main condition” of phase stability was introduced in our previous studies of two-sided multipactors [M. Mostajeran, J. Instrum. 8, P04024 (2013); M. Mostajeran and M. Lamehi Rachti, Nucl. Instrum. Methods Phys. Res. A 615, 1–5 (2010)]. Using the same condition and assuming zero initial velocity for the secondary electrons, a regime of multipactors outside the resonance zones is found. The theoretical results are then verified by numerical simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Subtlety of TiO 2 phase stability: Reliability of the density functional theory predictions and persistence of the self-interaction error

TiO 2 is an important material with broad applications that can exist in different phases with dramatically different properties. Theoretical prediction of their polymorph energetics is therefore critical for the material design and for identifying thermodynamically accessible structures. Determining TiO 2 relative phase stabilities remains challenging for first-principles methods, and density functional theory is the only approach available for studying phase stabilities at finite temperatures with acceptable computational efficiency. Here, we show that density functional theory using the recently developed efficient strongly constrained and appropriately normed (SCAN) [Sun et al., Phys. Rev. Lett. 115, 036402 (2015)] exchange-correlation functional for the first time predicts the phase stability in qualitative agreement with the experimental results at realistic conditions. Further analysis shows that the self-interaction error intrinsic in the density functional persists in the stability prediction. By correcting the self-interaction error through an empirical approach, SCAN predicts the relative stability as well as defect properties in excellent agreement with the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stability, physical properties and strengthening mechanisms of concentrated solid solution alloys

Here, we review recent research developments in a special class of multicomponent concentrated solid solution alloys (CSAs) – of which the recently discovered high entropy alloys (HEAs) are exemplars – that offer a new paradigm for the development of next generation structural materials. This review focuses on the role of inherent extreme chemical complexity on the phase stability, electronic, transport, and mechanical properties of this remarkable class of disordered solid solution alloys. Both experimental observations and theoretical models indicate that the phase stability of HEAs goes beyond the original conjecture that these alloys are stabilized by configurational/mixing entropy; rather, it results from competition between the homogeneously disordered phase and phase separation/intermetallic compound formation. Although the number of single-phase HEAs with equiatomic composition is limited, those that do exist often exhibit remarkable electronic, magnetic, transport, and mechanical properties. For the mechanical response, we discuss the solution strengthening mechanism which governs the strength and deformation behaviors of the CSAs, as well as the increasing evidence that low stacking fault energies (deformation twinning) plays an important role in the low temperature strength and ductility of CrMnFeCoNi related alloys. We also review the current understanding of the role of the number and type of alloy elements in determining the electronic, magnetic, and transport properties, in particular the dominant role of magnetic interactions in the properties of 3d-transition metal based alloys. Finally, we emphasize that, despite rapid progress in characterization and understanding of the phase stability and physical/mechanical responses of CSAs, there remain significant challenges to fully exploring the new paradigm that these alloys represent.

36 MATERIALS SCIENCE↗

Phase Stability in the Fe-Rich Fe-Cr-Ni-Zr Alloys

Knowledge on phase stability in Fe-rich Fe-Cr-Ni-Zr alloys is needed for the development of Laves-phase strengthened Fe-Cr-Ni-Zr ferritic alloys which have shown promising applications as new cladding materials of nuclear reactors due to enhanced high temperature strength, and resistance to creep and irradiation hardening. Phase stability in four Fe-rich Fe-Cr-Ni-Zr alloys was carefully investigated using scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction techniques. The samples were arc-melted and heat treated at 700 °C for 336 hours and 1000 °C for 1275 hours. The experimental results showed extensive solubility of Ni in the intermetallic phases Fe 23 Zr 6 and Fe 2 Zr_C15. Nickel stabilizes the Laves Fe 2 Zr_C15 structure more than the C36 and C14 structures. In addition to Fe 23 Zr 6 and Fe 2 Zr_C15, Ni 7 Zr 2 was found to be stable in samples with higher Ni content and lower annealing temperature. The body-centered-cubic, Fe 2 Zr_C15 and Fe 23 Z 6 coexist in all samples regardless of composition and temperature. Detailed analysis suggested that the coexistence of these three phases is not a result of thermodynamic equilibrium, but a result of the competing formation kinetics of Fe 2 Zr_C15 and Fe 23 Z 6 .

36 MATERIALS SCIENCE↗

Grain size dependent phase stabilities and presence of a monoclinic (Pm) phase in the morphotropic phase boundary region of (1−x)Bi(Mg{sub 1/2}Ti{sub 1/2})O{sub 3}-xPbTiO{sub 3} piezoceramics

Results of the room temperature structural studies on (1−x)Bi(Mg{sub 1/2}Ti{sub 1/2})O{sub 3}-xPbTiO{sub 3} ceramics using Rietveld analysis of the powder x-ray diffraction data in the composition range 0.28 ≤ x ≤ 0.45 are presented. The morphotropic phase boundary region exhibits coexistence of monoclinic (space group Pm) and tetragonal (space group P4 mm) phases in the composition range 0.33 ≤ x ≤ 0.40. The structure is nearly single phase monoclinic (space group Pm) in the composition range 0.28 ≤ x ≤ 0.32. The structure for the compositions with x ≥ 0.45 is found to be predominantly tetragonal with space group P4 mm. Rietveld refinement of the structure rules out the coexistence of rhombohedral and tetragonal phases in the morphotropic phase boundary region reported by earlier authors. The Rietveld structure analysis for the sample x = .35 calcined at various temperatures reveals that phase fraction of the coexisting phases in the morphotropic phase boundary region varies with grain size. The structural parameters of the two coexisting phases also change slightly with changing grain size.

36 MATERIALS SCIENCE↗

Solid phase stability of molybdenum under compression: Sound velocity measurements and first-principles calculations

The high-pressure solid phase stability of molybdenum (Mo) has been the center of a long-standing controversy on its high-pressure melting. In this work, experimental and theoretical researches have been conducted to check its solid phase stability under compression. First, we performed sound velocity measurements from 38 to 160 GPa using the two-stage light gas gun and explosive loading in backward- and forward-impact geometries, along with the high-precision velocity interferometry. From the sound velocities, we found no solid-solid phase transition in Mo before shock melting, which does not support the previous solid-solid phase transition conclusion inferred from the sharp drops of the longitudinal sound velocity [Hixson et al., Phys. Rev. Lett. 62, 637 (1989)]. Then, we searched its structures globally using the multi-algorithm collaborative crystal structure prediction technique combined with the density functional theory. By comparing the enthalpies of body centered cubic structure with those of the metastable structures, we found that bcc is the most stable structure in the range of 0–300 GPa. The present theoretical results together with previous ones greatly support our experimental conclusions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

(Y0.5In0.5)Ba(Co,Zn)4O7 cathodes with superior high-temperature phase stability for solid oxide fuel cells

(Y0.5In0.5)BaCo4-xZnxO7 (1.0 x 2.0) oxides crystallizing in a trigonal P31c structure have been synthesized and explored as cathode materials for solid oxide fuel cells (SOFC). At a given Zn content, the (Y0.5In0.5)BaCo4-xZnxO7 sample with 50 % Y and 50 % In exhibits much improved phase stability at intermediate temperatures (600 - 800 oC) compared to the samples with 100 % Y or In. However, the substitution of Zn for Co in (Y0.5In0.5)Ba(Co4-xZnx)O7 (1.0 x 2.0) decreases the amount of oxygen loss on heating, total electrical conductivity, and cathode performance in SOFC while providing good long-term phase stability at high temperatures. Among the various chemical compositions investigated in the (Y0.5In0.5)Ba(Co4-xZnx)O7 system, the (Y0.5In0.5)BaCo3ZnO7 sample offers a combination of good electrochemical performance and low thermal expansion coefficient (TEC) while maintaining superior phase stability at 600 800 oC for 100 h. Fuel cell performances of the (Y0.5In0.5)Ba(Co3Zn)O7 + Ce0.8Gd0.2O1.9 (GDC) (50 : 50 wt. %) composite cathodes collected with anode-supported single cell reveal a maximum power density value of 521 mW cm-2 at 700 oC.

cathodes↗

Predictions of Boron Phase Stability Using an Efficient Bayesian Machine Learning Interatomic Potential

Thermodynamic phase stability of three elemental boron allotropes, i.e., α-B, β-B, and γ-B, was investigated using a Bayesian interatomic potential trained via a sparse Gaussian process (SGP). SGP potentials trained with datasets from on-the-fly active learning achieve quantum mechanical level accuracy when employed in molecular dynamics simulations to predict wide-ranging thermodynamic, structural, and vibrational properties. The simulated phase diagram (500~1400 K and 0~16 GPa) agrees with experimental measurements. The SGP-based MD simulations also successfully predicted that the B13 defect is critical in stabilizing β-B below 700 K. At higher temperatures, the entropy becomes the dominant factor, making β-B the more stable phase over α-B. Furthermore, this Letter demonstrates that SGP potentials based on a training set consisting of defect-free-only systems could make correct predictions of defect-related phenomena in solid-state crystals, paving the path to investigate crystal phase stability and transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio investigation of phase stability of Y2Ti2O7 and Y2Zr2O7 under high pressure

The phase stabilities of Y2Ti2O7 and Y2Zr2O7 under high pressure were investigated by ab initio methods. Pyrochlore-structured Y2Ti2O7 and defect-fluorite Y2Zr2O7 exhibit different responses to high pressure. Both the defect-fluorite and defect-cotunnite structures are energetically more stable at high pressure in Y2Ti2O7, but comparison with experimental results suggest that only the transformation to the defect-fluorite structure is kinetically favored. For Y2Zr2O7, the defect-fluorite phase should undergo a structural transformation to the defect-cotunnite state under high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase stability, structures and properties of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices

The phase stability of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices has been investigated through the low temperature solid state synthesis of a number of new binary Bi{sub x}Te{sub 1-x} compositions. Powder X-ray diffraction revealed that an infinitely adaptive series forms for 0.44{<=}x{<=}0.70, while an unusual 2-phase region with continuously changing compositions is observed for 0.41{<=}x{<=}0.43. For x>0.70, mixtures of elemental Bi and an almost constant composition (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} phase are observed. Rietveld analysis of synchrotron X-ray powder diffraction data collected on Bi{sub 2}Te (m=2, n=1) revealed substantial interchange of Bi and Te between Bi{sub 2} and Bi{sub 2}Te{sub 3} blocks, demonstrating that the block compositions are variable. All investigated phase pure compositions are degenerate semiconductors with low residual resistivity ratios and moderate positive magnetoresistances (R/R{sub 0}=1.05 in 9 T). The maximum Seebeck coefficient is +80 {mu}V K{sup -1} for x=0.63, leading to an estimated thermoelectric figure of merit, zT=0.2 at 250 K. - Graphical abstract: An infinite number of possible (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} structures exist for Bi{sub x}Te{sub 1-x} compositions between x=0.44 and x=0.70. Compositions near x=2/3 are promising p-type thermoelectrics. Highlights: Black-Right-Pointing-Pointer Phase Stability of the (Bi{sub 2}){sub m}{center_dot}(Bi{sub 2}Te{sub 3}){sub n} Natural Superlattices. Black-Right-Pointing-Pointer Thermoelectric Properties in the Bi{sub x}Te{sub 1-x} Phase Diagram. Black-Right-Pointing-Pointer Crystal Structure of Bi{sub 2}Te from Synchrotron X-ray Powder Diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Stability of Yttrium Titanium Oxide

This proposed study aims at elevating Idaho National Laboratory (INL)’s portfolio in nuclear material research on two major fronts: 1) expanding INL’s material characterization capabilities to provide holistic microstructural and microchemical characterization ranging from atomic scale to millimeter scale, and 2) filling the knowledge gap on the effect of microstructural evolution on material phase stability at extreme conditions resembling those inside nuclear reactors, using Yttrium-Titanium-Oxide (YTO) as a model material. Previous research indicated the kinetics of phase transition of YTO materials varies between bulk samples and powder samples, suggesting that microstructural characteristics such as defect, micro-strain, and crystallite size could play a significant role in phase transition. The effect of crystallite size on the thermodynamics of phase transition has been well documented for other ceramic materials at nanometer crystallite size, with potential impacts from surface and strain energy and defects. In this proposed study, we will perform microstructural (micro-strain, crystallite size, defects, phase) and microchemical (elemental mapping) analyses through in-situ high temperature measurements using X-ray diffraction (XRD; at millimeter scale for powder and bulk samples) and transmission electron microscopy (TEM, at nanometer scale and atomic scale for powder and thin foil samples), to provide a comprehensive view of the effect of microstructural and microchemical evolution on phase transition and phase stability of YTO materials. These findings will also establish a roadmap and provide new insights on the phase stability of other materials that are critical to nuclear energy and other renewable energy infrastructure. Besides advancing our understanding of this fundamental material science question, this project will also enable the development of state-of-the-art material characterization capabilities at INL/MFC for microstructural and microchemical analysis at high temperature conditions. The new collaboration between the High-Resolution Materials Characterization group at INL and the Electron Microscopy group at the University of Florida (UF) in this project will open the possibilities for more fruitful and synergetic cutting-edge nuclear material research in the future.

36 MATERIALS SCIENCE↗

Crystal structure, chemical expansion and phase stability of HoMnO{sub 3} at high temperature

Anisotropic thermal and chemical expansion of hexagonal HoMnO{sub 3} was investigated by high temperature X-ray diffraction in inert (N{sub 2}) and oxidizing (air) atmospheres up to 1623 K. A second order structural phase transition directly from P6{sub 3}cm to P6{sub 3}/mmc was found at 1298{+-}4 K in N{sub 2} atmosphere, and 1318{+-}4 K in air. For the low temperature polymorph P6{sub 3}cm the contraction of the c-axis was more rapid in inert than in oxidizing atmosphere. The c-axis of the P6{sub 3}/mmc polymorph of HoMnO{sub 3} displayed anomalously high expansion above 1400 K, which is discussed in relation to chemical expansion caused by point defects. The a-axis expanded stronger in inert than oxidizing atmosphere. Anisotropic chemical and thermal expansion of the P6{sub 3}cm phase of YMnO{sub 3} in N{sub 2}, air and O{sub 2} atmospheres was found to be qualitatively similar to that of HoMnO{sub 3}. Decomposition of hexagonal HoMnO{sub 3} by two different processes occurs in oxidizing atmosphere above {approx}1200 K followed by nucleation and growth of the perovskite polymorph of HoMnO{sub 3}. A rapid, reconstructive transition from the perovskite back to the hexagonal polymorph was observed in situ at 1623 K upon reduction of the partial pressure of oxygen. A phase stability diagram of the hexagonal and orthorhombic polymorphs is proposed. Finally, distinctly non-linear electrical conductivity was observed for both HoMnO{sub 3} and YMnO{sub 3} in oxidizing atmosphere between 555 and 630 K, and shown to be associated with excess oxygen. - Graphical abstract: Chemical expansion of hexagonal HoMnO{sub 3} is observed during HTXRD in different pO{sub 2}. Oxidizing atmosphere favors the competing perovskite polymorph. Electrical conductivity anomalies related to excess oxygen are found at 550-630 K. Highlights: Black-Right-Pointing-Pointer Thermal evolution of crystal structure of HoMnO{sub 3} studied up to 1623 K in air and N{sub 2}. Black-Right-Pointing-Pointer Anisotropic chemical expansion of HoMnO{sub 3} and YMnO{sub 3} in N{sub 2}, air and O{sub 2}. Black-Right-Pointing-Pointer Hexagonal phase destabilized with respect to perovskite in oxidizing atmosphere. Black-Right-Pointing-Pointer Crystal structure and phase stability discussed in terms of point defect chemistry. Black-Right-Pointing-Pointer Electrical conductivity anomalies associated with excess oxygen at 550-630 K.

36 MATERIALS SCIENCE↗

Phase Stability in Calcia‐Doped Zirconia Nanocrystals

Calcia‐doped zirconia exhibits all of the polymorphism seen in the yttria‐doped zirconia ceramics, but can be produced at lowered costs and in greater abundance due to the accessibility of Calcium precursors in comparison to Yttrium. Although with great challenges, there exists an opportunity to replace yttria with calcia in applications such as ionic conductors where phase stability is critical. There is a dearth of surface characterization to enable design and prediction of the polymorphism in nanoparticulate calcia–zirconia. With recent advances in water adsorption microcalorimetry, one can accurately probe surface energies of the four zirconia polymorphs: monoclinic, tetragonal, cubic, and amorphous. The surface energies can then be coupled with bulk enthalpies extracted from oxide melt drop solution calorimetry to create a nanocrystalline phase stability diagram similar to its bulk counterpart. We report here the surface and bulk thermodynamic data on polymorphs of calcia–zirconia with composition ranging from 0 to 20 mol% calcia and use it to build a nanophase diagram for this system. The effect of the humidity in the phase stability diagram trends is also addressed and demonstrated to minimize the effect of the surface energies in the overall polymorphism trends.

Drazin, John W.↗

Phase stability and elastic modulus of Ti alloys containing Nb, Zr, and/or Sn from first-principles calculations

The alloying effects of Nb, Zr, and/or Sn on the phase stability and elastic properties of Ti are investigated by using a first-principles method. Our calculation results indicate that a carefully designed Ti-Nb-Zr-Sn system can be a good candidate for low modulus biomedical materials. We find that the well-known correlation between the e/a ratio and both elastic and phase stabilities for Ti alloyed with transition metal elements breaks down for the Ti-Sn alloy.

36 MATERIALS SCIENCE↗

Unexpected role of linker position on ammonium gemini surfactant lyotropic gyroid phase stability

Arising from the water-driven self-assembly of amphiphiles over generally narrow temperature and composition phase windows, aqueous lyotropic liquid crystal (LLC) network phases are useful in applications as therapeutic delivery vehicles and templates for mesoporous material syntheses. While a clear set of amphiphile design rules that enables access to these intricate three-dimensional structures has yet to emerge, recent work indicates that bis(ammonium), bis(phosphonium), and dicarboxylate gemini (“twin tail”) surfactants enable enhanced access to LLC network phases such as the double gyroid (G). In order to better understand the scope of this amphiphile design strategy, we investigated the synthesis and aqueous LLC self-assembly behaviors of a homologous series of quaternary gemini bis(ammonium) dichloride surfactants, in which we varied the position of the hydrophobic linker that connects the constituent single tail surfactants. These experiments show that the position of the linker directly impacts the maximum counterion–headgroup hydration capacity and the extent of counterion–headgroup association, all of which contribute to the aqueous lyotropic double gyroid network phase stability. Thus, judicious selection of the linker position in ionic gemini surfactants provides a new molecular design tool for manipulating LLC network phase stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stability of a microtron driving a terahertz FEL

The phase stability of bunches accelerated by a magnetron-driven microtron-injector of a terahertz Free Electron Laser (FEL) has been studied to optimize the microtron regimes providing good operation of the FEL. The study is based on a simulation of the beam dynamics in the microtron considering 2-D motion of the electrons in the median plane. This allows the computation of the current loading the accelerating cavity as well as the output microtron current. The loading current has been used to calculate the frequency deviations caused by the incremental loading in the accelerating cavity coupled with the magnetron. Further computations using the 2-D simulation show noticeable phase oscillation of the accelerated bunch leaving the microtron on the macro-pulse front. The phase oscillation is in agreement with the measured one and affects the lasing in the microtron-based FEL. Optimization of the microtron regimes allows one to minimize the effect. As a result, the terahertz microtron-based FEL provides radiated macro-pulse energy up to 0.2 mJ tunable in the range of 0.85-3 THz with good stability. Results of the simulation and the measurements are presented in this article.

43 PARTICLE ACCELERATORS↗