Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOSPHATE GLASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Phosphate glass matrix composites incorporating trisilanol phenyl polyhedral oligomeric silsesquioxane prepared by viscous flow sintering method with enhanced benefits

The effect of mixing and sintering processes to prepare tin fluorophosphate glass (Pglass) matrix composites incorporating trisilanol phenyl polyhedral oligomeric silsesquioxane (TSP-POSS) was investigated by comparing manual and suspension mixing, one-step and stepwise sintering processes to explore the structure dynamics and physical properties in the composites as a function of the different process conditions used. Energy Dispersive X-ray analysis confirmed optimal homogeneous dispersion of the TSP-POSS molecules in the composites prepared by the suspension method. The observed increase of glass transition temperature and the reduction of non-bridging bonds in the composites are believed to be the reason for the effective dispersion of TSP-POSS molecules in the composites. The chemical reaction between the TSP-POSS and Pglass was strongly influenced by the mixing/dispersion and sintering processes investigated. 13 C cross polarized magic angle spinning (CP MAS) solid state nuclear magnetic resonance (NMR) spectroscopy confirmed the chemical stability of the TSP-POSS during the sintering process at elevated temperatures. In addition, a chemical reaction between the TSP-POSS and Pglass was evidenced by 29 Si CP MAS NMR analysis. Here, this study will provide a better fundamental understanding of the effective dispersion mechanism of the TSP-POSS molecules in the Pglass matrix that will facilitate tailoring the physicochemical properties of the composites with addition of various small concentrations of TSP-POSS for a number of applications where the pure Pglass is not applicable due to the intrinsic properties of the Pglass.

36 MATERIALS SCIENCE↗

Analyses of iron phosphate glasses for dehalogenated salt waste

Specimens cut from series of glasses made at PNNL to represent a range of salt loadings in prototype composition DPF-5 and a range of iron oxide loadings in prototype composition DPF-3 were subjected to modified ASTM C1308 tests to assess the relative durabilities and retention of salt cations. Test results show both the intrinsic durability and salt cation retention decrease as the total amount of salt cations is increased, but waste forms made with up to 34 mass % salt waste loadings on a salt-cation basis are more durable than glass-bonded sodalite waste forms made with optimal salt waste loadings (about 6% on a salt-cation basis). Other tests are in progress to assess the effect of solution feedback on the long-term durability of these materials.

Ebert, W. L.↗

Compositional effects on the chemical durabilities of aluminophosphate glasses: A review

Phosphate glasses have a range of applications including as hosts for immobilizing radioactive wastes. Studies have shown that addition of iron and/or aluminum oxides can drastically improve the chemical durability of phosphate glasses where the accurate measurement of chemical durability is one of the most important factors for determining the long-term viability of a given waste form. However, due to inconsistencies with the experimental methods used to generate chemical durability data, comparing and interpreting such data is a tedious task. These variables include the temperature of the test, the specimen form (e.g., coupon, particles), the pressure of the test (e.g., atmospheric pressure, elevated pressure in an autoclave), the exposure time, the exposure medium, and how the loss is documented (e.g., total mass lost, normalized elemental release). This review paper summarizes a large collection of chemical durability tests on aluminophosphate glasses in various studies. In addition, the effects of different oxides on the properties of phosphate glasses are summarized.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of Nd3+:glass, solar-pumped, high-powr laser systems

The operating characteristics of Nd(3+):glass lasers energized by a solar concentrator were analyzed for the hosts YAG, silicate glass, and phosphate glass. The modeling is based on the slab zigzag laser geometry and assumes that chemical hardening methods for glass are successful in increasing glass hardness by a factor of 4. On this basis, it was found that a realistic 1-MW solar-pumped laser might be constructed from phosphate glass 4 sq m in area and 2 mm thick. If YAG were the host medium, a 1-MW solar-pumped laser need only be 0.5 sq m in area and 0.5 cm thick, which is already possible. In addition, Nd(3+) doped glass fibers were found to be excellent solar-pumped laser candidates. The small diameter of fibers eliminates thermal stress problems, and if their diameter is kept small (10 microns), they propagate a Gaussian single mode which can be expanded and transmitted long distances in space. Fiber lasers could then be used for communications in space or could be bundled and the individual beams summed or phase-matched for high-power operation.

Zapata, L. E.↗

Structure–property relations of sodium iron phosphate nuclear waste glasses: Effects of iron redox ratio and glass composition

Iron phosphate glasses, known for their exceptional chemical durability and potential applicability in nuclear waste management, have gained significant attention over the years. The structures of these glasses are complicated by the coexistence of Fe 3+ and Fe 2+ , which plays a crucial role in determining their structures and properties. Here, this work uses molecular dynamics simulations to study the structural changes in Na 2 O–Fe 2 O 3 –P 2 O 5 glasses with varying glass composition and Fe 2+ /Fe 3+ redox ratio. It was found that the redox ratio and modifier contents significantly affected the short-range and medium-range orders in the glasses. Significant changes in the local environments around P 5+ and Fe 3+ were observed, as reflected by the bond distances and coordination numbers. Na + cations are found to preferentially associate with Fe 3+ (rather than Fe 2+ ), whereas Fe 2+ has stronger association with P 5+ than Na + , confirming the structural role of Fe 2+ as a glass modifier. The disruptions in P–O–P linkages upon increasing FeO suggest that FeO causes glass depolymerization. These glasses achieved higher connectivity with increasing Fe 3+ / (Fe 3+ + Fe 2+ ) ratios, conerting phosphorous Q 2 to Q 3 units and iron Q 5 units to Q 4 units. The decrease of nonbridging oxygen fractions with increasing Fe 3+ / (Fe 3+ + Fe 2+ ) ratios, through creating P–O–Fe linkages, is the main reason of enhanced network connectivity. Quantitative structure–property relationship analyses with different structural descriptors were used to correlate with measured properties. The analyses provided valuable insights into structure–property relationships, emphasizing the importance of choosing relevant energy parameters and defining glass network connectivity, particularly in F net descriptors. It was found the Fe–O–P linkage density exhibits strong correlations to measured dissolution rates, supporting the importance of these linkages in improving the chemical durability in iron phosphate glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Relationship between surface μ‐roughness and interface slurry particle spatial distribution during glass polishing

Abstract During optical glass polishing, a number of interactions between the workpiece (i.e., glass), polishing slurry, and pad can influence the resulting workpiece roughness at different spatial scale lengths. In our previous studies, the particle size distribution of the slurry, the pad topography, and the amount of material removed by a single particle on the workpiece were shown to strongly correlate with roughness at AFM scale lengths (nm‐μm) and weakly at μ‐roughness scale lengths (μm‐mm). In this study, the polishing slurry pH and the generation of glass removal products are shown to influence the slurry particle spatial and height distribution at the polishing interface and the resulting μ‐roughness of the glass workpiece. A series of fused silica and phosphate glass samples were polished with various ceria and colloidal silica slurries over a range of slurry pH , and the resulting AFM roughness and μ‐roughness were measured. The AFM roughness was largely invariant with pH , suggesting that the removal function of a single particle is unchanged with pH . However, the μ‐roughness changed significantly, increasing linearly with pH for phosphate glass and having a maximum at an intermediate pH for fused silica. In addition, the spatial and height distribution of slurry particles on the pad (as measured by laser confocal microscopy) was determined to be distinctly different at low and high pH during phosphate glass polishing. Also, the zeta potential as a function of pH was measured for the workpiece, slurry, and pad with and without surrogate glass products (K 3 PO 4 for phosphate glass and Si( OH ) 4 for silica) to assess the role of interfacial charge during polishing. The addition of K 3 PO 4 significantly raised the zeta potential, whereas addition of Si( OH ) 4 had little effect on the zeta potential. An electrostatic DLVO three‐body force model, using the measured zeta potentials, was used to calculate the particle–particle, particle–workpiece, and particle–pad attractive and repulsive forces as a function of pH and the incorporation of glass products at the interface. The model predicted an increase in particle–pad attraction with an increase in pH and phosphate glass products consistent with the measured slurry distribution on the pads during phosphate glass polishing. Finally, a slurry “island” distribution gap ( IDG ) model has been formulated which utilizes the measured interface slurry distributions and a load balance to determine the interface gap, the contact area fraction, and the load on each slurry “island”. The IDG model was then used to simulate the workpiece surface topography and μ‐roughness; the results show an increase in roughness with pH similar to that observed experimentally.

Suratwala, Tayyab↗

DEVELOPMENT OF GLASS MATRICES FOR HLW RADIOACTIVE WASTES

Vitrification is currently the most widely used technology for the treatment of high level radioactive wastes (HLW) throughout the world. Most of the nations that have generated HLW are immobilizing in either borosilicate glass or phosphate glass. One of the primary reasons that glass has become the most widely used immobilization media is the relative simplicity of the vitrification process, e.g. melt waste plus glass forming frit additives and cast. A second reason that glass has become widely used for HLW is that the short range order (SRO) and medium range order (MRO) found in glass atomistically bonds the radionuclides and governs the melt properties such as viscosity, resistivity, sulphate solubility. The molecular structure of glass controls contaminant/radionuclide release by establishing the distribution of ion exchange sites, hydrolysis sites, and the access of water to those sites. The molecular structure is flexible and hence accounts for the flexibility of glass formulations to waste variability. Nuclear waste glasses melt between 1050-1150 C which minimizes the volatility of radioactive components such as Tc{sup 99}, Cs{sup 137}, and I{sup 129}. Nuclear waste glasses have good long term stability including irradiation resistance. Process control models based on the molecular structure of glass have been mechanistically derived and have been demonstrated to be accurate enough to control the world's largest HLW Joule heated ceramic melter in the US since 1996 at 95% confidence.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Luminescence of phosphorus containing oxide materials: Crystalline SiO{sub 2}‐P and 3P{sub 2}O{sub 5}⋅7SiO{sub 2}; CaO⋅P{sub 2}O{sub 5}; SrO⋅P{sub 2}O{sub 5} glasses

Luminescence of phosphate glasses such as CaO⋅P{sub 2}O{sub 5} and SrO⋅P{sub 2}O{sub 5} is compared with that of phosphorus doped crystalline α-quartz and phosphosilicate glass with content 3P{sub 2}O{sub 5}⋅7SiO{sub 2}. Water and OH groups are found by IR spectra in these materials. The spectrum of luminescence contains many bands in the range 1.5 - 5.5 eV. The luminescence bands in UV range at 4.5-5 eV are similar in those materials. Decay duration in exponential approximation manifests a time constant about 37 ns. Also a component in μs range was detected. PL band of μs component is shifted to low energy with respect to that of ∼37 ns component. This shift is about 0.6 eV. It is explained as singlet-triplet splitting of excited state. Below 14 K increase of luminescence kinetics duration in μs range was observed and it was ascribed to zero magnetic field splitting of triplet excited state of the center. Yellow-red luminescence was induced by irradiation in phosphorus doped crystalline α-quartz, phosphosilicate glasses. The yellowl uminescence contains two bands at 600 and 740 nm. Their decay is similar under 193 nm laser and may be fitted with the first order fractal kinetics or stretched exponent. Thermally stimulated luminescence contains only band at 600 nm. The 248 nm laser excites luminescence at 740 nm according to intra center process with decay time constant about 4 ms at 9 K. Both type of luminescence UV and yellow were ascribed to different defects containing phosphorus. P-doped α-quartz sample heated to 550 co become opalescent. Ir spectra related to water and OH groups are changed. Photoluminescence intensity of all three bands, UV (250 nm), yellow (600 nm) and red (740 nm) strongly diminished and disappeared after heating to 660 C°. Radiation induced red luminescence of non-bridging oxygen luminescence center (NBO) appeared in crystal after heat treatment. We had observed a crystalline version of this center (l. Skuja et al, Nuclear Instruments and Methods in Physics Research B 286,159-168 (2012)). Effect of heat treatment explained as sedimentation of phosphorus in some state. Keeping of treated sample at 450-500 C° leads to partial revival of ability to create yellow luminescence center under irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FINAL REPORT TESTING OF IRON PHOSPHATE LAW GLASS (VSL-11R2340-1) 04/25/2011 REV 0 06/10/2011

About 50 million gallons of high-level mixed waste is currently stored in underground tanks at The United States Department of Energy's (DOE's) Hanford site in the State of Washington. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will provide DOE's Office of River Protection (ORP) with a means of treating this waste by vitrification for subsequent disposal. The tank waste will be separated into low- and high-activity waste fractions, which will then be vitrified respectively into Immobilized Low Activity Waste (ILAW) and Immobilized High Level Waste (IHLW) products. The ILAW product will be disposed in an engineered facility on the Hanford site while the IHLW product will likely be directed to a national deep geological disposal facility for high-level nuclear waste. The ILA W and IHLW products must meet a variety of requirements with respect to protection of the environment before they can be accepted for disposal. The objectives of the work reported herein were to assess the corrosion of Inconel 690 and 693 in the FeP glass developed by MS&T and to measure key high temperature properties of the LAW iron phosphate glass. Specific objectives of these tests were the following: (1) Determination of the extent of corrosion of Inconel 690 and 693 in LAW FeP glass at 1050, 1l00, and 1150 C; (2) Determination of the extent of corrosion of Inconel 690 and 693 in LAW FeP glass in the presence of an electric field; (3) Measurement of the high temperature specific heat of the LAW FeP glass; (4) Measurement of the high temperature density of the LAW FeP glass; (5) Measurement of the high temperature thermal diffusivity of the LAW FeP glass; and (6) Calculation of the high temperature thermal conductivity of the LAW FeP glass from the above three measured properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

GLASSES CONTAINING IRON (II III) OXIDES FOR IMMOBILIZATION OF RADIOACTIVE TECHNETIUM

Technetium-99 (Tc-99) has posed serious environmental threats as US Department of Energy's high-level waste. This work reports the vitrification of Re, as surrogate for Tc-99, by iron-borosilicate and iron-phosphate glasses, respectively. Iron-phosphate glasses can dissolve Re as high as {approx} 1.2 wt. %, which can become candidate waste forms for Tc-99 disposal, while borosilicate glasses can retain less than 0.1 wt. % of Re due to high melting temperature and long melting duration. Vitrification of Re as Tc-99's mimic was investigated using iron-borosilicate and iron-phosphate glasses. The retention of Re in borosilicate glasses was less than 0.1 wt. % and more than 99 wt. % of Re were volatilized due to high melting temperature and long melting duration. Because the retention of Re in iron-phosphate glasses is as high as 1.2 wt. % and the volatilization is reduced down to {approx}50 wt. %, iron-phosphate glasses can be one of the glass waste form candidates for Tc (or Re) disposal. The investigations of chemical durability and leaching test of iron-phosphate glasses containing Re are now underway to test the performance of the waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Study of structural, electrical, and dielectric properties of phosphate-borate glasses and glass-ceramics

In this work, phosphate-borate based glasses with molar composition 20.7P{sub 2}O{sub 5}–17.2Nb{sub 2}O{sub 5}–13.8WO{sub 3}–34.5A{sub 2}O–13.8B{sub 2}O{sub 3}, where A = Li, Na, and K, were prepared by the melt quenching technique. The as-prepared glasses were heat-treated in air at 800 °C for 4 h, which led to the formation of glass-ceramics. These high chemical and thermal stability glasses are good candidates for several applications such as fast ionic conductors, semiconductors, photonic materials, electrolytes, hermetic seals, rare-earth ion host solid lasers, and biomedical materials. The present work endorses the analysis of the electrical conductivity of the as-grown samples, and also the electrical, dielectric, and structural changes established by the heat-treatment process. The structure of the samples was analyzed using X-Ray powder Diffraction (XRD), Raman spectroscopy, and density measurements. Both XRD and Raman analysis confirmed crystals formation through the heat-treatment process. The electrical ac and dc conductivities, σ{sub ac} and σ{sub dc}, respectively, and impedance spectroscopy measurements as function of the temperature, varying from 200 to 380 K, were investigated for the as-grown and heat-treated samples. The impedance spectroscopy was measured in the frequency range of 100 Hz–1 MHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗