SEARCH · Search NASA

Results for “PHOTOCHEMISTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Direct observation of ultrafast symmetry reduction during internal conversion of 2-thiouracil using Coulomb explosion imaging

The photochemistry of heterocyclic molecules plays a decisive role for processes and applications like DNA photo-protection from UV damage and organic photocatalysis. The photochemical reactivity of heterocycles is determined by the redistribution of photoenergy into electronic and nuclear degrees of freedom, initially involving ultrafast internal conversion. Most heterocycles are planar in their ground state and internal conversion requires symmetry breaking. To lower the symmetry, the molecule must undergo an out-of-plane motion, which has not yet been observed directly. Here we show using the example of 2-thiouracil, how Coulomb explosion imaging can be utilized to extract comprehensive information on this molecular deformation, linking the extracted deplanarization of the molecular geometry to the previously studied temporal evolution of its electronic properties. Particularly, the protons of the exploded molecule are well-suited messengers carrying rich information on its geometry at distinct times after electronic excitation. We expect that our new analysis approach centered on these peripheral protons can be adapted as a general concept for future time-resolved studies of complex molecules in the gas phase.

Chemical physics↗

DOE OSTI2025

Real-space observation of the dissociation of a transition metal complex and its concurrent energy redistribution

Mechanistic insights into photodissociation dynamics of transition metal carbonyls, like Fe(CO) 5 , are fundamental for understanding active catalytic intermediates. Although extensively studied, the structural dynamics of these systems remain elusive. Using ultrafast X-ray scattering, we uncover the photochemistry of Fe(CO) 5 in real space and time, observing synchronous oscillations in atomic pair distances, followed by a prompt rotating CO release preferentially in the axial direction. This behavior aligns with simulations, reflecting the interplay between the axial Fe-C distances’ potential energy landscape and non-adiabatic transitions between metal-to-ligand charge-transfer states. Additionally, we characterize a secondary delayed CO release associated with a reduction of Fe-C steady state distances and structural dynamics of the formed Fe(CO) 4 . Our results quantify energy redistribution across vibration, rotation, and translation degrees of freedom, offering a microscopic view of complex structural dynamics, enhancing our grasp on Fe(CO) 5 photodissociation, and advancing our understanding of transition metal catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

A study of silver acetate under extreme conditions

With the aim of exploring chemical systems that may undergo metallization when irradiated with hard X-rays, we selected silver acetate (AgC 2 H 3 O 2 ) for the subject of this study. X-ray-induced decomposition of silver acetate under ambient and high-pressure conditions was observed in a diamond anvil cell (DAC), leading to the formation of metallic nanograins of silver at ambient pressure and 1.65 GPa. At 4 GPa, no decomposition was observed. The Avrami kinetics equation also provides information about novel structural formation at ambient pressure and 1.65 GPa. By modeling of the XRD data, it was found that the size of the silver nanocrystallites formed at 1.65 GPa pressure steadily increased to ∼5 nm after 600 min of X-ray irradiation as determined by applying the Scherrer equation to the diffraction peak widths. Time-resolved X-ray diffraction (XRD) revealed pressure-dependent kinetics, demonstrating that coupling pressure with irradiation enables controlled photochemical pathways in this model system. Concurrent with previous studies, the application of high pressure (HP) can be considered as a means of controlling X-ray synthetic photochemistry.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Hole–hole Tamm–Dancoff-approximated density functional theory: A highly efficient electronic structure method incorporating dynamic and static correlation

The study of photochemical reaction dynamics requires accurate as well as computationally efficient electronic structure methods for the ground and excited states. While time-dependent density functional theory (TDDFT) is not able to capture static correlation, complete active space self-consistent field methods neglect much of the dynamic correlation. Hence, inexpensive methods that encompass both static and dynamic electron correlation effects are of high interest. Here, we revisit hole–hole Tamm–Dancoff approximated (hh-TDA) density functional theory for this purpose. The hh-TDA method is the hole–hole counterpart to the more established particle–particle TDA (pp-TDA) method, both of which are derived from the particle–particle random phase approximation (pp-RPA). In hh-TDA, the N-electron electronic states are obtained through double annihilations starting from a doubly anionic (N+2 electron) reference state. In this way, hh-TDA treats ground and excited states on equal footing, thus allowing for conical intersections to be correctly described. Furthermore, the treatment of dynamic correlation is introduced through the use of commonly employed density functional approximations to the exchange-correlation potential. Additionally, we show that hh-TDA is a promising candidate to efficiently treat the photochemistry of organic and biochemical systems that involve several low-lying excited states—particularly those with both low-lying ππ* and nπ* states where inclusion of dynamic correlation is essential to describe the relative energetics. In contrast to the existing literature on pp-TDA and pp-RPA, we employ a functional-dependent choice for the response kernel in pp- and hh-TDA, which closely resembles the response kernels occurring in linear response and collinear spin-flip TDDFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Phase control of coherent acoustic phonons in gold bipyramids for optical memory and manipulating plasmon–exciton coupling

Recent efforts have targeted manipulation of nanomaterial vibrational modes in applications such as chemical/mass sensing, optical switching, and phonon-driven photochemistry. While impulsive photoexcitation can generate coherent phonons, multiple excitation pulses offer the prospect of control and manipulation of coherent phonon modes for functions of optical memory and logic. In this work, we use such an approach to inject an arbitrary coherent phonon phase into a colloidal ensemble of highly monodisperse gold bipyramids. We then demonstrate that this technique can be applied to a system that exhibits plasmon-exciton coupling to further manipulate the hybridization of the system. This ability to manipulate acoustic phonons and hybridization can enable optical logic applications of acoustic phonons in addition to optical memory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Investigating the ultraviolet photodissociation of bromocyclopropane with ultrafast electron diffraction

We have studied the photodissociation of gas-phase bromocyclopropane by 200 nm wavelength ultraviolet radiation using ultrafast electron diffraction. Bromocyclopropane is a prototypical molecule in the study of organobromides, a class of molecules that have a significant impact on atmospheric ozone depletion through their photochemistry. Here, previous studies have revealed two possible reaction pathways for the photodissociation of bromine from bromocyclopropane; either the C–Br bond dissociates, leaving behind a cyclopropyl ring, or there is a concerted opening of the cyclopropyl ring along with the C–Br bond dissociation. In this work, both our experimental and simulation results indicate that the majority of the UV-photoexcited BCP molecules (88% ± 11% in the experiment) follow the first reaction pathway, in which the cyclopropyl ring remains closed after homolytic C–Br bond cleavage. This direct bond dissociation occurs within the experimental time resolution of 270 fs. In order to differentiate between the possible reaction end-products, both of which have diffraction signals dominated by the bromine atom, a new analysis method has been employed, which is more sensitive to the structure of the end-products.

Atmospheric chemistry↗

DOE OSTI2024

Tracking dissociation pathways of nitrobenzene via mega-electron-volt ultrafast electron diffraction

As the simplest nitroaromatic compound, nitrobenzene is an interesting model system to explore the rich photochemistry of nitroaromatic compounds. Previous investigations of nitrobenzene's photochemical dynamics have probed structural and electronic properties. These investigations paint, at times, a convoluted and sometimes contradictory description of the photochemical landscape. Here, we investigate the ultrafast dynamics of nitrobenzene triggered by photoexcitation at 267 nm for the first time using a structural probe with femtosecond time resolution. Our probe complements previous measurements of nitrobenzene's electronic structure evolution and aids in determining the photochemical dynamics with less ambiguity. We employ megaelectronvolt ultrafast electron diffraction to follow nitrobenzene's structural evolution within the first 5 ps after photoexcitation. We observe ground state recovery within 160 ± 60 fs through nonadiabatic dynamics. Based on comparisons of the experimental signal with molecular dynamics simulations, we exclude a significant population of the triplet manifold. Furthermore, we do not observe fragmentation of nitrobenzene within the investigated time window, which indicates that previously observed photofragmentation reactions take place in the vibrationally 'hot' ground state on timescales considerably beyond 5 ps.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2025

Thermal and photoinduced chemistry of the aromatic Criegee intermediate, benzaldehyde oxide: Implications for indoor air quality

Essential oils contain a complex mixture of volatile organic compounds, ranging from terpenes to aromatics. When released into the indoor air environment or into the atmosphere, they may undergo oxidation to generate complex reactive intermediates that affect indoor air quality. Cinnamaldehyde is one such aromatic molecule that is abundant in essential oils. When released into the indoor air environment, it may undergo oxidation to form a carbonyl oxide (Criegee intermediate) with an aromatic substituent: benzaldehyde oxide. In this manuscript, we present a high-level quantum chemical study that shows that, unlike smaller atmospherically relevant Criegee intermediates, benzaldehyde oxide is expected to undergo solar photolysis on timescales that are competitive with its ground state unimolecular and bimolecular chemistry. We show that aromatic substitution leads to a drastic bathochromic shift in the spectroscopically relevant excited states, revealing that photolysis in the indoor or outdoor environment should not be neglected when modeling the climate and air quality implications of Criegee intermediates with extended conjugation. Here, we predict a range of products that may be important for forming lower volatility compounds via tropospherically relevant photochemistry. To motivate future experimental validation of our results, we propose a viable synthetic procedure of the relevant precursor for generating and stabilizing benzaldehyde oxide.

atmospheric photochemistry↗

DOE OSTI2023

Ultrafast X-Ray Probes of Elementary Molecular Events

Elementary events that determine photochemical outcomes and molecular functionalities happen on the femtosecond and subfemtosecond timescales. Among the most ubiquitous events are the nonadiabatic dynamics taking place at conical intersections. These facilitate ultrafast, nonradiative transitions between electronic states in molecules that can outcompete slower relaxation mechanisms such as fluorescence. The rise of ultrafast X-ray sources, which provide intense light pulses with ever-shorter durations and larger observation bandwidths, has fundamentally revolutionized our spectroscopic capabilities to detect conical intersections. Recent theoretical studies have demonstrated an entirely new signature emerging once a molecule traverses a conical intersection, giving detailed insights into the coupled nuclear and electronic motions that underlie, facilitate, and ultimately determine the ultrafast molecular dynamics. Following a summary of current sources and experiments, we survey these techniques and provide a unified overview of their capabilities. We discuss their potential to dramatically increase our understanding of ultrafast photochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Ligand-Controlled Energetics and Charge Transfer in Pure and Doped Nanocrystals

The research in this award period initially focused on the spectroscopy and dynamics of spherical CdSe nanocrystals and CdSe nanoplatelets. In the later part of the grant period we turned our attention to InP-based nanocrystals. It has long been believed that the transient absorption signal from approximately spherical CdSe nanocrystals is dominated by conduction band state filling. However, this long-held belief has recently been challenged, based on femtosecond absorption measurements. However, the recent studies challenging the conventional wisdom do not account of finite rates of spin-lattice relaxation. Our work showed that this is a crucial error and that the recent results are misinterpreted, that is, the previous prevailing wisdom is correct. Another study focused on CdSe nanocrystal photochemistry used transient absorption (TA) spectroscopy to determine the spatial extents of CdSe nanoplatelet (NPL) excitons. Our work shows that the spatial extents of the excitons in the NPLs are far less than the physical dimension of the NPL. Using a model developed to understand the transient absorption spectroscopy, we obtain an average excitonic area of 21.2 ± 2.5 nm 2 , independent of the nanoplatelet size. Our work on InP/ZnSe and InP/ZnS core/shell nanocrystals shows that when there is a small lattice mismatch (InP-ZnSe, 3.5%) a coherent core-shell interface is obtained. In contrast, the InP-ZnS lattice mismatch is much larger, 8.3%. In this case, the experimental results showed best agreement with calculations in which lattice strain is ignored, indicating that the interfaces in InP/ZnS nanocrystals are largely incoherent.

14 SOLAR ENERGY↗

DOE OSTI2024

The Liquid Jet Endstation for Hard X-ray Scattering and Spectroscopy at the Linac Coherent Light Source

The ability to study chemical dynamics on ultrafast timescales has greatly advanced with the introduction of X-ray free electron lasers (XFELs) providing short pulses of intense X-rays tailored to probe atomic structure and electronic configuration. Fully exploiting the full potential of XFELs requires specialized experimental endstations along with the development of techniques and methods to successfully carry out experiments. The liquid jet endstation (LJE) at the Linac Coherent Light Source (LCLS) has been developed to study photochemistry and biochemistry in solution systems using a combination of X-ray solution scattering (XSS), X-ray absorption spectroscopy (XAS), and X-ray emission spectroscopy (XES). The pump–probe setup utilizes an optical laser to excite the sample, which is subsequently probed by a hard X-ray pulse to resolve structural and electronic dynamics at their intrinsic femtosecond timescales. The LJE ensures reliable sample delivery to the X-ray interaction point via various liquid jets, enabling rapid replenishment of thin samples with millimolar concentrations and low sample volumes at the 120 Hz repetition rate of the LCLS beam. This paper provides a detailed description of the LJE design and of the techniques it enables, with an emphasis on the diagnostics required for real-time monitoring of the liquid jet and on the spatiotemporal overlap methods used to optimize the signal. Additionally, various scientific examples are discussed, highlighting the versatility of the LJE.

EXAFS↗

DOE OSTI2020

Estimating the Ultraviolet Emission of M Dwarfs with Exoplanets from Ca ii and Hα

M dwarf stars are excellent candidates around which to search for exoplanets, including temperate, Earth-sized planets. To evaluate the photochemistry of the planetary atmosphere, it is essential to characterize the UV spectral energy distribution of the planet’s host star. This wavelength regime is important because molecules in the planetary atmosphere such as oxygen and ozone have highly wavelength-dependent absorption cross sections that peak in the UV (900–3200 Å). We seek to provide a broadly applicable method of estimating the UV emission of an M dwarf, without direct UV data, by identifying a relationship between noncontemporaneous optical and UV observations. Our work uses the largest sample of M dwarf star far- and near-UV observations yet assembled. We evaluate three commonly observed optical chromospheric activity indices—Hα equivalent widths and log{sub 10} L Hα /L bol , and the Mount Wilson Ca ii H&K S and R HK ' indices—using optical spectra from the HARPS, UVES, and HIRES archives and new HIRES spectra. Archival and new Hubble Space Telescope COS and STIS spectra are used to measure line fluxes for the brightest chromospheric and transition region emission lines between 1200 and 2800 Å. Our results show a correlation between UV emission-line luminosity normalized to the stellar bolometric luminosity and Ca ii R HK ' with standard deviations of 0.31–0.61 dex (factors of ~2–4) about the best-fit lines. We also find correlations between normalized UV line luminosity and Hα log 10 L Hα /L bol and the S index. These relationships allow one to estimate the average UV emission from M0 to M9 dwarfs when UV data are not available.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Transmission Spectroscopy for the Warm Sub-Neptune HD 3167c: Evidence for Molecular Absorption and a Possible High-metallicity Atmosphere

We present a transmission spectrum for the warm (500−600 K) sub-Neptune HD 3167c obtained using the Hubble Space Telescope Wide Field Camera 3 infrared spectrograph. We combine these data, which span the 1.125–1.643 μm wavelength range, with broadband transit measurements made using Kepler/K2 (0.6–0.9 μm) and Spitzer/IRAC (4–5 μm). We find evidence for absorption by at least one of H{sub 2}O, HCN, CO{sub 2}, and CH{sub 4} (Bayes factor 7.4; 2.5σ significance), although the data precision does not allow us to unambiguously discriminate between these molecules. The transmission spectrum rules out cloud-free hydrogen-dominated atmospheres with metallicities ≤100× solar at >5.8σ confidence. In contrast, good agreement with the data is obtained for cloud-free models assuming metallicities >700× solar. However, for retrieval analyses that include the effect of clouds, a much broader range of metallicities (including subsolar) is consistent with the data, due to the degeneracy with cloud-top pressure. Self-consistent chemistry models that account for photochemistry and vertical mixing are presented for the atmosphere of HD 3167c. The predictions of these models are broadly consistent with our abundance constraints, although this is primarily due to the large uncertainties on the latter. Interior structure models suggest that the core mass fraction is >40%, independent of a rock or water core composition, and independent of atmospheric envelope metallicity up to 1000× solar. We also report abundance measurements for 15 elements in the host star, showing that it has a very nearly solar composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Volumetric Additive Manufacturing of Dormant Catalytic Chemistries to Generate Silicone Micro‐ and Millifluidic Devices and Instant Molds

Tomographic volumetric additive manufacturing (T‐VAM) rapidly prints solid objects within minutes, accessing photochemistries that are traditionally challenging for layer‐based additive manufacturing methods. This includes high‐viscosity materials, air‐free chemistries, and solid‐state systems. Catalytic chemistries are appealing as a pathway to engineering advanced materials, including tough thermosets, silicone elastomers, and complex block copolymers. However, photoactivated dormant catalytic chemistries, where the catalyst irreversibly activates upon exposure to light, are incompatible with typical tomographic VAM approaches. To address this limitation, a zero‐dose optimization strategy is devised to preserve dormant catalysts in desired regions by keeping them unexposed to light. VAM printed micro‐ and millifluidic devices and instant molds are successfully produced within minutes in silicones polymerized using photoactivated dormant platinum photohydrosilylation catalysts. The printed channels are programmed to be 500 and 2500 µm for the micro‐ and millifluidic devices, and print fidelity is assessed by X‐ray computed tomography. This work demonstrates the potential of zero‐dose optimization to expand the range of chemistries accessible for VAM, enabling the rapid fabrication of complex devices.

Additive Manufacturing↗

DOE OSTI2021

Photodriven Elimination of Chlorine From Germanium and Platinum in a Dinuclear Pt II →Ge IV Complex

Abstract Searching for a connection between the two‐electron redox behavior of Group‐14 elements and their possible use as platforms for the photoreductive elimination of chlorine, we have studied the photochemistry of [( o ‐(Ph 2 P)C 6 H 4 ) 2 Ge IV Cl 2 ]Pt II Cl 2 and [( o ‐(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt III Cl 3 , two newly isolated isomeric complexes. These studies show that, in the presence of a chlorine trap, both isomers convert cleanly into the platinum germyl complex [( o ‐(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt I Cl with quantum yields of 1.7 % and 3.2 % for the Ge IV –Pt II and Ge III –Pt III isomers, respectively. Conversion of the Ge IV –Pt II isomer into the platinum germyl complex is a rare example of a light‐induced transition‐metal/main‐group‐element bond‐forming process. Finally, transient‐absorption‐spectroscopy studies carried out on the Ge III –Pt III isomer point to a ligand arene–Cl . charge‐transfer complex as an intermediate.

Karimi, Mohammadjavad↗

DOE OSTI2025

Photophysical and Time‐resolved Infrared Properties of Long‐Lived Rhenium(I) 4,5‐Diazafluorene Tricarbonyl Chromophores

This report investigates the synthesis, structural characterization, fundamental molecular photophysics, electrochemistry, UV-Vis spectroelectrochemistry, and time-resolved infrared spectroscopic properties of eight [fac-Re(dafR)(CO) 3 L] 0/+ complexes, where R=ethyl [(dedaf); 1, 3, 5, 7] or H [(dafH); 2, 4, 6, 8] and L=Cl− (1, 2), imidazole [(Im); 3, 4], 4-ethylpyridine [(4-Etpy); 5, 6], or pyridine [(py); 7, 8]. Universally, 1–8 yield higher energy photoluminescence (PL) emission bands and higher PL quantum yields (up to 53 %) than the classic 2,2’-bipyridine (bpy) and 1,10-phenanthroline (phen) ligated Re(I) tricarbonyl complexes. The excited state lifetimes of 1–8 lie between those corresponding to the bpy and phen derivatives, ranging from 120 and 1300 ns at room temperature. Combinations of reductive UV-Vis spectroelectrochemistry, transient absorption spectroscopy, and time-resolved infrared spectroscopy consistently assigned the lowest excited states in 1–8 being of metal-to-ligand charge transfer (MLCT) character. These new ReI MLCT chromophores follow classic energy gap law behavior and possess the characteristics necessary for serving as valuable photosensitizers suitable to energize excited state electron and energy transfer photochemistry.

Charge transfer↗

DOE OSTI2026

Exploding Bridgewire (EBW) Detonators: An Example of Synergistic Multiphysics

Exploding bridgewire (EBW) detonators are highly temporally reproducible explosive devices that require the rapid discharge of a high‐voltage capacitance to operate and so are immune to most of the accidental hazards associated with traditional electric detonators. They have been demonstrated to be safe enough for use in high‐consequence explosive applications. Despite continued use for over 82 years, understanding the exact mechanism of operation has remained elusive. Various researchers have ascribed either deflagration‐to‐detonation (DDT) or shock‐to‐detonation (SDT) phenomena observed in other explosive events to explain the science behind the successful engineering; however, a rigorous justification has been absent. Previously, we have demonstrated a complex interaction in EBW detonators between large electrical currents, non‐equilibrium thermodynamic material states, plasma physics, powder compaction phenomena, shock physics, photochemistry, and rapid conventional explosive chemical reaction processes. Specifically, we have made progress in understanding the complex multiphysics that operates in these detonators and demonstrating that it is a serendipitous synergy between UV light emitted from the arc formed as the bridge is electrically exploded and the accompanying short‐duration shock transmitted into the explosive powder bed that allows these devices to function at practical capacitor sizes and charge voltages. This insight not only places the topic on a firmer scientific footing but potentially enables new approaches to safe detonator design.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Molecular Functionalization of Semiconductor Surfaces

The presence of molecules on semiconductor surfaces can have a profound impact on their properties and applications in solar energy conversion. In this chapter we discuss the methods used to effect functionalization of semiconductor surfaces with molecular dipoles and catalysts. A major focus is the energetic impacts such molecules have to the fields at the semiconductor|contact interface. These field modulations are strongly dependent on the nature of the surface-bound molecule including its dipole moment and orientation as well as the distance of the dipole from the semiconductor surface. The contacting phase also has a strong impact on the energetics, since ions in the liquid electrolytes relevant to inorganic photochemistry partially screen dipolar effects at the surface. In addition to detailed description of these fundamentals, we present the history of this field as well as state-of-the-art chemistries that leverage the preceding decades of knowledge to impart the molecular interfacial layer with dynamic properties such as light absorption and catalysis. The challenges of establishing stable molecular attachment schemes at semiconductor|electrolyte interfaces are interwoven throughout the chapter. We conclude with a prognosis and future outlook that we hope will be a useful guide to those interested in developing the next generation of molecular chemistries at photoelectrode interfaces.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,I↗