Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA COMPOSITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Implementation of multifilter based twin-prototypes for core electron temperature measurements in the TJ-II stellarator

The design and preliminary results from a prototype of a multifilter based electron temperature diagnostic for the TJ-II stellarator are presented. The diagnostic consists of four photodiodes with filters of different thicknesses to determine the electron temperature in a wide variety of plasma compositions, thanks to the set of six different signal-pairs ratios available. The impurity transport code IONEQ, the TJ-II soft x-ray tomography, and the VUV survey diagnostics give the necessary information to assess the proposed diagnostic reliability. In parallel, a vacuum-compatible multichannel electronic board has been designed for a future linear array to determine electron temperature profiles in high-density plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atmospheric pressure plasma polymerization using double grounded electrodes with He/Ar mixture

In this study, we have proposed the double grounded atmospheric pressure plasma jet (2G-APPJ) device to individually control the plasmas in both fragmentation (or active) and recombination (or passive) regions with a mixture of He and Ar gases to deposit organic thin films on glass or Si substrates. Plasma polymerization of acetone has been successfully deposited using a highly energetic and high-density 2G-APPJ and confirmed by scanning electron microscopy (SEM). Plasma composition was measured by optical emission spectroscopy (OES). In addition to a large number of Ar and He spectra lines, we observed some spectra of C{sub 2} and CH species for fragmentation and N{sub 2} (second positive band) species for recombination. The experimental results confirm that the Ar gas is identified as a key factor for facilitating fragmentation of acetone, whereas the He gas helps the plume of plasma reach the substrate on the 2{sup nd} grounded electrode during the plasma polymerization process. The high quality plasma polymerized thin films and nanoparticles can be obtained by the proposed 2G-APPJ device using dual gases.

36 MATERIALS SCIENCE↗

Comment on 'Large amplitude double layers in a positively charged dusty plasma with nonthermal electrons' [Phys. Plasmas 16, 063708 (2009)]

The claim by Djebli and Marif [Phys. Plasmas 16, 063708 (2009)] that for the same plasma composition two sets of double layers with very different amplitudes and Mach numbers can be supported is erroneous and imputable to numerical errors. That one of these sets of double layers exhibits a decreasing trend is shown analytically to be impossible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

4D Density Determination of NH Radicals in an MSE Microplasma Combining Planar Laser Induced Fluorescence and Cavity Ring-Down Spectroscopy

An application of microplasmas is surface modification under mild conditions and of small, well defined areas. For this, an understanding of the plasma composition is of importance. First results of our work on the production and detection of NH radicals in a capacitively coupled radio frequency (RF) microplasma are presented. A microstructured comb electrode was used to generate a glow discharge in a hydrogen/nitrogen gas mixture by applying 13.56 MHz RF voltage. The techniques of planar laser induced fluorescence (PLIF) and cavity ring-down spectroscopy (CRDS) are used for space and time resolved, quantitative detection of the NH radical in the plasma. The rotational temperature was determined to be 820 K and, the density 5.1x10{sup 12} cm{sup 3}. Also, time dependent behaviour of the NH production was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of electronic transport coefficients of Ag and Au plasma

The thermoelectric transport coefficients of silver and gold plasma have been calculated within the relaxation-time approximation. We considered temperatures of 10-100 kK and densities of {rho} < or approx. 1 g/cm{sup 3}. The plasma composition was calculated using a corresponding system of coupled mass action laws, including the atom ionization up to +4. For momentum cross sections of electron-atom scattering we used the most accurate expressions available. The results of our modeling have been compared with other researchers' data whenever possible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A design approach for improving the performance of single-grid planar retarding potential analyzers

Planar retarding potential analyzers (RPAs) have a long flight history and have been included on numerous spaceflight missions including Dynamics Explorer, the Defense Meteorological Satellite Program, and the Communications/Navigation Outage Forecast System. RPAs allow for simultaneous measurement of plasma composition, density, temperature, and the component of the velocity vector normal to the aperture plane. Internal conductive grids are used to approximate ideal potential planes within the instrument, but these grids introduce perturbations to the potential map inside the RPA and cause errors in the measurement of the parameters listed above. A numerical technique is presented herein for minimizing these grid errors for a specific mission by varying the depth and spacing of the grid wires. The example mission selected concentrates on plasma dynamics near the sunset terminator in the equatorial region. The international reference ionosphere model is used to discern the average conditions expected for this mission, and a numerical model of the grid-particle interaction is used to choose a grid design that will best fulfill the mission goals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radio-frequency capacitive discharge with flowing liquid electrodes at reduced gas pressures

Results are presented from experimental studies of the electrophysical and spectral characteristics of the low-temperature plasma of a radio-frequency capacitive discharge excited between two flowing liquid electrodes at gas pressures of 10{sup 3}−10{sup 5} Pa. The plasma composition, the electron density, and the vibrational and rotational temperatures of gas molecules are estimated. The types and shapes of discharge are described, and the thermal and gas-hydrodynamic processes in the discharge zone are analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of RF Sheath-Driven Tungsten Erosion at RF Antenna in the WEST Tokamak

This study applies the newly developed STRIPE (Simulated Transport of RF Impurity Production and Emission) framework to analyze tungsten (W) erosion at RF antenna structures in the WEST tokamak. STRIPE integrates SolEdge3x for edge plasma backgrounds, COMSOL for 3D RF sheath potentials, RustBCA for sputtering yields, and GITR for impurity transport and ion energy–angle distributions. Building on prior work by Kumar et al. (2025) Nuclear Fusion, 65, 076039, which validated STRIPE for WEST ICRH discharge #57877, the present study provides a spatially resolved assessment of gross W erosion at both Q2 antenna limiters under ohmic and ICRH conditions. Simulations using 2D SolEdge3x profiles in COMSOL capture rectified sheath potentials exceeding 300 V, leading to strong upper-limiter localization. Both poloidal and toroidal asymmetries are observed and attributed to RF sheath effects, with modeled erosion patterns deviating from experiment—highlighting sensitivity to sheath geometry and plasma resolution. Erosion is driven primarily by high-charge-state oxygen ions (O6+–O8+), while D+ plays a negligible role. Assuming a plasma composition of 1% oxygen and 98% deuterium, STRIPE predicts a 30-fold increase in gross W erosion from ohmic to ICRH phases, consistent with a >25-fold rise in W-I (400.9 nm) brightness. Quantitative agreement is within 5% in the ohmic phase and 30% under ICRH, demonstrating predictive capability. Importantly, the study shows that the magnitude of ICRH-driven W erosion depends strongly on the concentration of light impurities (O, B, N, C), which drive sputtering through high charge states. Cleaner plasma conditions with reduced impurity content are therefore expected to substantially mitigate antenna W sources in WEST and other toroidal fusion devices. These findings establish STRIPE as a predictive framework for RF-induced plasma–material interactions and support its application to reactor-scale antenna design.

Kumar, Atul [ORNL] (ORCID:0000000277475210)↗

Acoustic Solitary Waves and Sagdeev Potential Triple Roots

Both KdV theory and the standard pseudopotential theory require that solitons and double layers be explicitly super-acoustic, with the pseudopotential {psi}({phi},M) having a maximum at the origin. Recent studies of a variety of different three-component plasmas have shown that they may support finite amplitude solitons at the true acoustic speed of the plasma configuration, M{sub s}. These are associated with triple roots of the Sagdeev potential, and the usual soliton condition is replaced by {psi}''(0,M){<=}0. Sagdeev potentials for speeds marginally greater than M{sub s} then represent solitons of both polarities, one whose amplitude vanishes at M{sub s}(KdV-like), while the other is necessarily finite at M{sub s}('nonKdV-like'). Such coexistence regions have been observed to be linked to a critical plasma compositional parameter value for which {psi}'''(0,M{sub s}) = 0.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Autonomous Ion Mass Spectrometer Sentry (AIMSS)

Satellite measurements of plasma density and temperature help predict the intensity of geomagnetic storms, which can impact satellites, communications, and power systems. Accurate forecasting requires knowledge of plasma composition. However, typical orbital mass spectrometers have difficulty distinguishing between nitrogen (N+) and oxygen (O+) ions due to their similar masses. This limitation makes it difficult to validate modern space weather models, which depend on accurate knowledge of ion composition in near-Earth space. N+ and O+ ions behave differently in space due to differences in their origin, transport, and loss mechanisms. Improving our ability to distinguish between these ions is critical for understanding and predicting space weather.

47 OTHER INSTRUMENTATION↗

Arbitrary amplitude ion-acoustic solitary excitations in the presence of excess superthermal electrons

Velocity distribution functions with an excess of superthermal particles are commonly observed in space plasmas, and are effectively modeled by a kappa distribution. They are also found in some laboratory experiments. In this paper we obtain existence conditions for and some characteristics of ion-acoustic solitary waves in a plasma composed of cold ions and {kappa}-distributed electrons, where {kappa}>3/2 represents the spectral index. As is the case for the usual Maxwell-Boltzmann electrons, only positive potential solitons are found, and, as expected, in the limit of large {kappa} one recovers the usual range of possible soliton Mach numbers, viz., 1<M<1.58. For lower values of {kappa}, modeling the presence of a greater superthermal component, the range of accessible Mach numbers is reduced. It is found that the amplitude of the largest possible solitons that may be generated in a given plasma (corresponding to the highest allowed Mach number for the given plasma composition) falls off with decreasing {kappa}, i.e., an increasing superthermal component. On the other hand, at fixed Mach number, both soliton amplitude and profile steepness increase as {kappa} is decreased. These changes are seen to be important particularly for {kappa}<4, i.e., when the electrons have a 'hard' spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of controlled spectral emission of Al plasmas generated by temporally tailored laser irradiation

Hydrodynamics simulations and irradiation experiments were performed to correlate ul-trashort intensity envelopes of the laser fields and thermodynamical states reached by the emerging plasma phase in ablation regimes. We discuss the efficiency of energy coupling as a function of different intensity envelopes and the resulting temperature, density and ionization states since the energy delivery rate is an essential factor that predetermines the material thermodynamic evolution. Subsequently, we examine the plasma composition in calculating the proportion of neutral/ion species typical of LIBS signals and comparing it with neutral/ion ratios given by experimental results. Moreover, the calculations allow to investigate the efficiency of nanoparticles generation from materials subjected to different heating rates. These can be related to hydrodynamic ejection of nanosized liquid layers upon the action of mechanic waves. With support from numerical simulations of the hydrodynamic advance of the excited matter, experiments revealed that mastering intensity envelopes of ultrashort laser pulse leads to further control on the ablation products. Emerging plasma phase in a hot state generates specific spectral emission patterns that can serve as indicators for its controlled formation and kinetic evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High power impulse magnetron sputtering discharge

The high power impulse magnetron sputtering (HiPIMS) discharge is a recent addition to plasma based sputtering technology. In HiPIMS, high power is applied to the magnetron target in unipolar pulses at low duty cycle and low repetition frequency while keeping the average power about 2 orders of magnitude lower than the peak power. This results in a high plasma density, and high ionization fraction of the sputtered vapor, which allows better control of the film growth by controlling the energy and direction of the deposition species. This is a significant advantage over conventional dc magnetron sputtering where the sputtered vapor consists mainly of neutral species. The HiPIMS discharge is now an established ionized physical vapor deposition technique, which is easily scalable and has been successfully introduced into various industrial applications. The authors give an overview of the development of the HiPIMS discharge, and the underlying mechanisms that dictate the discharge properties. First, an introduction to the magnetron sputtering discharge and its various configurations and modifications is given. Then the development and properties of the high power pulsed power supply are discussed, followed by an overview of the measured plasma parameters in the HiPIMS discharge, the electron energy and density, the ion energy, ion flux and plasma composition, and a discussion on the deposition rate. Finally, some of the models that have been developed to gain understanding of the discharge processes are reviewed, including the phenomenological material pathway model, and the ionization region model.

36 MATERIALS SCIENCE↗

Discharge between Liquid Jet and Metallic Electrodes

Experimental investigation of the low-temperature plasma of a gas discharge initiated in an interelectrode gap where one electrode is a liquid jet cathode and the other is a metallic anode has been carried out. Data are presented for the physical and spectral characteristics of the discharge and plasma composition. The electron concentration and temperature, as well as the vibrational and rotational temperatures of the heavy component have been estimated. The form and type of the discharge and also gas-hydrodynamic and thermal processes at the interface are described.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion-acoustic supersolitons in plasmas with two-temperature electrons: Boltzmann and kappa distributions

Acoustic supersolitons arise when a plasma model is able to support three consecutive local extrema of the Sagdeev pseudopotential between the undisturbed conditions and an accessible root. This leads to a characteristic electric field signature, where a simple bipolar shape is enriched by subsidiary maxima. Large-amplitude nonlinear acoustic modes are investigated, using a pseudopotential approach, for plasmas containing two-temperature electrons having Boltzmann or kappa distributions, in the presence of cold fluid ions. The existence domains for positive supersolitons are derived in a methodological way, both for structure velocities and amplitudes, in terms of plasma compositional parameters. In addition, typical pseudopotentials, soliton, and electric field profiles have been given to illustrate that positive supersolitons can be found in the whole range of electron distributions from Maxwellian to a very hard nonthermal spectrum in kappa. However, it is found that the parameter ranges that support supersolitons vary significantly over the wide range of kappa considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of long-range enhanced collisional velocity drag through plasma wave damping

Here we present damping measurements of axial plasma waves in magnetized, multispecies ion plasmas. At high temperatures $T≳10^{-2}$ eV, collisionless Landau damping dominates, whereas, at lower temperatures $T≲10^{-2}$ eV, the damping arises from interspecies collisional drag, which is dependent on the plasma composition and scales roughly as $T^{-3/2}$. This drag damping is proportional to the rate of parallel collisional slowing, and is found to exceed classical predictions of collisional drag damping by as much as an order of magnitude, but agrees with a new collision theory that includes long-range collisions. Centrifugal mass separation and collisional locking of the species occur at ultra-low temperatures $T≲10^{-3}$ eV, which reduce the drag damping from the $T^{-3/2}$ collisional scaling. These mechanisms are investigated by measuring the damping of higher frequency axial modes, and by measuring the damping in plasmas with a non-equilibrium species profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanosynthesis by atmospheric arc discharges excited with pulsed-DC power: a review

Plasma technology is actively used for nanoparticle synthesis and modification. All plasma techniques share the ambition of providing high quality, nanostructured materials with full control over their crystalline state and functional properties. Pulsed-DC physical/chemical vapour deposition, high power impulse magnetron sputtering, and pulsed cathodic arc are consolidated low-temperature plasma processes for the synthesis of high-quality nanocomposite films in vacuum environment. However, atmospheric arc discharge stands out thanks to the high throughput, wide variety, and excellent quality of obtained stand-alone nanomaterials, mainly core–shell nanoparticles, transition metal dichalcogenide monolayers, and carbon-based nanostructures, like graphene and carbon nanotubes. Unique capabilities of this arc technique are due to its flexibility and wide range of plasma parameters achievable by modulation of the frequency, duty cycle, and amplitude of pulse waveform. The many possibilities offered by pulsed arc discharges applied on synthesis of low-dimensional materials are reviewed here. Periodical variations in temperature and density of the pulsing arc plasma enable nanosynthesis with a more rational use of the supplied power. Parameters such as plasma composition, consumed power, process stability, material properties, and economical aspects, are discussed. Lastly a brief outlook towards future tendencies of nanomaterial preparation is proposed. Atmospheric pulsed arcs constitute promising, clean processes providing ecological and sustainable development in the production of nanomaterials both in industry and research laboratories.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Temperature of hydrogen radio frequency plasma under dechlorination process of polychlorinated biphenyls

It has been reported that RF (radio frequency) hydrogen plasmas promote the dechlorination process of PCBs (polychlorinated biphenyls) under irradiation of MW (microwave). A relative emission intensity spectroscope system was used for single-shot imaging of two-dimensional temperature distributions of RF hydrogen plasmas generated in chemical solutions with several mixing ratios of isopropyl alcohol (IPA) and insulation oil under MW irradiation. Our experimental results showed that the plasma generation frequencies for the oil-contaminating solutions were higher than that for the pure IPA solution. In addition, the plasma temperature in the compound liquids including both oil and IPA was higher than that in the pure IPA and oil solutions. A combination of the plasma temperature measurements and plasma composition analysis indicated that the hydrogen radicals generated in a chemical solution containing the equal volumes of IPA and oil were almost the same amounts of H and H{sup +}, while those produced in the other solutions were mainly H.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗