Search NASA⌕ Search

SEARCH · Search NASA

Results for “PREFLIGHT OPERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Post flight analysis of NASA standard star trackers recovered from the solar maximum mission

The flight hardware returned after the Solar Maximum Mission Repair Mission was analyzed to determine the effects of 4 years in space. The NASA Standard Star Tracker would be a good candidate for such analysis because it is moderately complex and had a very elaborate calibration during the acceptance procedure. However, the recovery process extensively damaged the cathode of the image dissector detector making proper operation of the tracker and a comparison with preflight characteristics impossible. Otherwise, the tracker functioned nominally during testing.

Newman, P.↗

The physiological cost of wearing the propellant handler's ensemble at the Kennedy Space Center

The potential for exposure to toxins used in the propulsion systems of spacecraft dictates the use of a whole body protective suit, the Propellant Handler's Ensemble (PHE) during preflight preparation and launching. The weight, structure, and operating parameters of the PHE may be expected to have a significant impact upon the metabolic, cardiovascular, and thermal responses of the user, especially during ambient temperature extremes and high workload situations. Four male subjects participated in tests in -7, 23, and 43 C (20, 74, and 110 F) environments in two versions of the PHE, the autonomous backpack (BP) and the hoseline (HL) supplied configuration. Measurements included heart rate (HR) rectal temperature, four skin temperatures, oxygen (O2), and carbon dioxide (CO2) in the helmet area, interior suit temperature, and suit pressure. Exercise metabolism was estimated from HR, PHE weight, and treadmill speed and grade. The HR responses between each PHE configuration were not statistically different. As a percentage of HR maximum, the mean values were 79 percent (COLD), 84 percent (LAB), and 90 percent (HOT). Helmet O2 and CO2 levels were correlated with percent HR max (P less than 0.001). Rectal temperatures were similar for each PHE configuration, except in the HOT exposure where the BP version exceeded the HL configuration (P less than 0.05). In nearly every instance the HR was driven to moderately high levels, the supplied respiratory gases were not optimum, and thermal adversity was a primary stressor. Our findings suggest that medical and physical fitness standards, along with operational restrictions, should be imposed upon PHE users to avoid situations that could adversely affect the worker.

Schonfeld, Brian R.↗

Manned Space-Flight Experiments: Gemini V Mission (Interim Report)

This compilation of papers constitutes an interim report on the results of experiments conducted during the Gemini V manned space flight. The results of experiments conducted on Gemini III and IV manned space flights have been published previously in a similar interim report, "Manned Space Flight Experiments Symposium, Gemini Missions III and IV," which is available upon request from MSC Experiments Program Office, Houston, Texas (Code EX, Attention of R. Kinard). The Gemini V mission provided the greatest opportunity to date for conducting experiments; the increased mission duration of eight days provided this added capability. The total mission experiment complement was seventeen. Five experiments were designed to obtain basic scientific knowledge, five were medical, and seven were technological and engineering in nature. Six of the experiments had flown previously on Gemini IV, and eleven were new. The results of the experiments, including real-time modification to preflight plans made necessary by abnormal spacecraft system operation, are presented.

Source record↗

Assessment of Postflight Locomotor Performance Utilizing a Test of Functional Mobility: Strategic and Adaptive Responses

Space flight induces adaptive modification in sensorimotor function, allowing crewmembers to operate in the unique microgravity environment. This adaptive state, however, is inappropriate for a terrestrial environment. During a re-adaptation period upon their return to Earth, crewmembers experience alterations in sensorimotor function, causing various disturbances in perception, spatial orientation, posture, gait, and eye-head coordination. Following long duration space flight, sensorimotor dysfunction would prevent or extend the time required to make an emergency egress from the vehicle; compromising crew safety and mission objectives. We are investigating two types of motor learning that may interact with each other and influence a crewmember's ability to re-adapt to Earth's gravity environment. In strategic learning, crewmembers make rapid modifications in their motor control strategy emphasizing error reduction. This type of learning may be critical during the first minutes and hours after landing. In adaptive learning, long-term plastic transformations occur, involving morphological changes and synaptic modification. In recent literature these two behavioral components have been associated with separate brain structures that control the execution of motor strategies: the strategic component was linked to the posterior parietal cortex and the adaptive component was linked to the cerebellum (Pisella, et al. 2004). The goal of this paper was to demonstrate the relative contributions of the strategic and adaptive components to the re-adaptation process in locomotor control after long duration space flight missions on the International Space Station (ISS). The Functional Mobility Test (FMT) was developed to assess crewmember s ability to ambulate postflight from an operational and functional perspective. Sixteen crewmembers were tested preflight (3 sessions) and postflight (days 1, 2, 4, 7, 25) following a long duration space flight (approx 6 months) on the ISS. We have further analyzed the FMT data to characterize strategic and adaptive components during the postflight readaptation period. Crewmembers walked at a preferred pace through an obstacle course set up on a base of 10 cm thick medium density foam (Sunmate Foam, Dynamic Systems, Inc., Leicester, NC). The 6.0m X 4.0m course consisted of several pylons made of foam; a Styrofoam barrier 46.0cm high that crewmembers stepped over; and a portal constructed of two Styrofoam blocks, each 31cm high, with a horizontal bar covered by foam and suspended from the ceiling which was adjusted to the height of the crewmember s shoulder. The portal required crewmembers to bend at the waist and step over a barrier simultaneously. All obstacles were lightweight, soft and easily knocked over. Crewmembers were instructed to walk through the course as quickly and as safely as possible without touching any of the objects on the course. This task was performed three times in the clockwise direction and three times in the counterclockwise direction that was randomly chosen. The dependent measures for each trial were: time to complete the course (seconds) and the number of obstacles touched or knocked down. For each crewmember, the time to complete each FMT trial from postflight days 1, 2, 4, 7 and 25 were further analyzed. A single logarithmic curve using a least squares calculation was fit through these data to produce a single comprehensive curve (macro). This macro curve composed of data spanning 25 days, illustrates the re-adaptive learning function over the longer time scale term. Additionally, logarithmic curves were fit to the 6 data trials within each individual post flight test day to produce 5 separate daily curves. These micro curves, produced from data obtained over the course of minutes, illustrates the strategic learning function exhibited over a relative shorter time scale. The macro curve for all subjects exhibited adaptive motor learning patterns over the 25 day period. Howev, 9/16 crewmembers exhibited significant strategic motor learning patterns in their micro curves, as defined by m > 1 in the equation of the line y=m*LN(x) +b. These data indicate that postflight recovery in locomotor function involves both strategic and adaptive mechanisms. Future countermeasures will be designed to enhance both recovery processes.

Warren, L. E.↗

Usability of an Updated Version of the Supplemental Data Service Provider-Consolidated Dashboard for Supporting Uncrewed Aircraft System Traffic Management

The Supplemental Data Service Provider-Consolidated Dashboard (SDSP-CD) is a preflight planning user interface (UI) that serves to aid operators when drafting routes for small uncrewed aircraft systems (sUASs). The primary function of the SDSP-CD is to identify hazards that an sUAS may encounter along a proposed flight path and assess the severity of these risks. A usability study was conducted on an updated version of the SDSP-CD to determine if the most recent iterations made to the system improved objective performance and subjective user experience. There are two main components of the SDSP-CD interface: (1) the dashboard and (2) the interactive map. The dashboard provides users with hazard and vehicle limitations for each sUAS in their fleet while the map contains a graphical representation of each vehicle’s route, hazard details, and geographic information. A series of preflight risk-assessment questions and tasks were developed to examine how participants interact with the updated version of the SDSP-CD. Additionally, a new service that measures vertiport congestion was developed and included as one of the services that was tested. In the present study, participants were trained to use the SDSP-CD and then completed two simulated scenarios during which they performed a variety of tasks, responded to questions, and completed surveys. The two scenarios developed for the present study were the Package Delivery and Hurricane Preparation scenarios. The Package Delivery scenario involved a fleet of four sUASs delivering low-stakes items (e.g., lunches and snacks) to people in a fictitious city. The Hurricane Preparation scenario involved a fleet of 11 sUASs delivering a range of supplies (from medicine to boardgames) to employees stranded at an office park due to road closures caused by an impending hurricane. Participants assumed the role of a fleet manager during both scenarios and were responsible for managing the sUASs in their fleet. Questions included those with objectively correct responses, open-ended strategy responses, and subjective user experience feedback. It was found that participants were largely successful at using the SDSP-CD interface to answer questions with objectively correct responses. Additionally, participants were able to use reasoning and logic based on the information available in the SDSP-CD to determine the cause of various risks and what actions they would consider taking. Finally, although participants reported that there were elements of the UI that could be improved, overall feedback pertaining to user experience suggested that the SDSP-CD concept is viable.

usability testing↗

Space Algae-2 Ground and Lunar Analog Studies in Preparation for Long-Duration Propagation of Cyanobacteria in Spaceflight

There are numerous applications for microalgae in spaceflight missions and on Earth, such as, oxygen production, carbon dioxide removal, nutrition, wastewater processing, and biofuel production. Space Algae-2 aims to test the genetic stability of Arthrospira platensis, commonly known as spirulina, during six-months of continuous culture in spaceflight on the International Space Station. Long-duration exposure to ionizing radiation and microgravity may impact growth, nutrient composition, and genetic stability. The high protein, vitamin, antioxidant content, and radiation resistance make spirulina a promising candidate for bioregenerative life support systems during long-duration missions. A concept of operations was developed to grow and harvest algal biomass in space. Preflight testing experiments were conducted to optimize conditions for an extended growth period in a gas permeable bioreactor bag. Preflight and post-harvest storage methods were developed in addition to a novel cryopreservation method. After sample return, multi-omics analysis will be conducted to determine the mutation rate, gene expression, and protein and metabolite profile. The concept of operations for Space Algae-2 was tested at HI-SEAS (Hawai’i Space Exploration Analog and Simulation) during a six-day lunar analog mission (EMMIHS23, EuroMoonMars, International MoonBase Alliance, HI-SEAS, 2023). A. platensis was grown in the semi-controlled environment using flight-like hardware and solar powered LED lights. Then, the biomass was harvested and used to supplement bread as an example of A. platensis utilization. Overall, the data collected from Space Algae-2 will inform potential bioengineering of spirulina for space and terrestrial applications.

Algae↗

Space Algae-2 Ground and Lunar Analog Studies in Preparation for Long-Duration Propagation of Cyanobacteria in Spaceflight

There are numerous applications for microalgae in spaceflight missions and on Earth, such as oxygen production, carbon dioxide removal, nutrition, wastewater processing, and biofuel production. Space Algae-2 aims to test the genetic stability of Arthrospira platensis, commonly known as spirulina, during six-months of continuous culture on the International Space Station. Long-duration exposure to ionizing radiation and microgravity may impact growth, nutrient composition, and genetic stability. The high protein, vitamin, antioxidant content, and radiation resistance make spirulina a promising candidate for bioregenerative life support systems. A concept of operations was developed to grow and harvest algal biomass in space. Preflight testing experiments optimized conditions for an extended growth period in a gas permeable bioreactor bag. Preflight and post-harvest storage methods were developed in addition to a novel cryopreservation method. After sample return, multi-omics analysis will be conducted to determine the mutation rate, gene expression, and the protein and metabolite profile. The concept of operations for Space Algae-2 was tested during a lunar mission simulation within a semi-controlled environment. During a six-day lunar analog mission at the Hawai’i Space Exploration Analog and Simulation (HI-SEAS) A. platensis was successfully grown using flight-like hardware. The cyanobacteria were harvested and used to supplement bread as an example of spirulina biomass utilization. Overall, the data collected from Space Algae-2 will inform potential bioengineering of spirulina for space and terrestrial applications.

Algae↗

Space Algae-2 Ground and Lunar Analog Studies in Preparation for Long-Duration Propagation of Cyanobacteria in Spaceflight

There are numerous applications for microalgae in spaceflight missions and on Earth, such as oxygen production, carbon dioxide removal, nutrition, wastewater processing, and biofuel production. Space Algae-2 aims to test the genetic stability of Arthrospira platensis, commonly known as spirulina, during six-months of continuous culture on the International Space Station. Long-duration exposure to ionizing radiation and microgravity may impact growth, nutrient composition, and genetic stability. The high protein, vitamin, antioxidant content, and radiation resistance make spirulina a promising candidate for bioregenerative life support systems. A concept of operations was developed to grow and harvest algal biomass in space. Preflight testing experiments optimized conditions for an extended growth period in a gas permeable bioreactor bag. Preflight and post-harvest storage methods were developed in addition to a novel cryopreservation method. After sample return, multi-omics analysis will be conducted to determine the mutation rate, gene expression, and the protein and metabolite profile. The concept of operations for Space Algae-2 was tested during a lunar mission simulation within a semi-controlled environment. During a six-day lunar analog mission at the Hawai’i Space Exploration Analog and Simulation (HI-SEAS) A. platensis was successfully grown using flight-like hardware. The cyanobacteria were harvested and used to supplement bread as an example of spirulina biomass utilization. Overall, the data collected from Space Algae-2 will inform potential bioengineering of spirulina for space and terrestrial applications.

Algae↗

Apollo 11 - Crew observations

Apollo 11 mission crew observation of operational and scientific phenomena associated with lunar landings, discussing preflight geologic training and briefings

Aldrin, E. E.↗

The DAST-1 remotely piloted research vehicle development and initial flight testing

The development and initial flight testing of the DAST (drones for aerodynamic and structural testing) remotely piloted research vehicle, fitted with the first aeroelastic research wing ARW-I are presented. The ARW-I is a swept supercritical wing, designed to exhibit flutter within the vehicle's flight envelope. An active flutter suppression system (FSS) designed to increase the ARW-I flutter boundary speed by 20 percent is described. The development of the FSS was based on prediction techniques of structural and unsteady aerodynamic characteristics. A description of the supporting ground facilities and aircraft systems involved in the remotely piloted research vehicle (RPRV) flight test technique is given. The design, specification, and testing of the remotely augmented vehicle system are presented. A summary of the preflight and flight test procedures associated with the RPRV operation is given. An evaluation of the blue streak test flight and the first and second ARW-I test flights is presented.

Kotsabasis, A.↗

Shuttle operations era planning for flight operations

The Space Transportation System (STS) provides routine access to space for a wide range of customers in which cargos vary from single payloads on dedicated flights to multiple payloads that share Shuttle resources. This paper describes the flight operations planning process from payload introduction through flight assignment to execution of the payload objectives and the changes that have been introduced to improve that process. Particular attention is given to the factors that influence the amount of preflight preparation necessary to satisfy customer requirements. The partnership between the STS operations team and the customer is described in terms of their functions and responsibilities in the development of a flight plan. A description of the Mission Control Center (MCC) and payload support capabilities completes the overview of Shuttle flight operations.

Holt, J. D.↗

X-57 High-Lift Propeller Control Schedule Development

The NASA X-57 distributed electric propulsion flight demonstrator uses a high-lift propeller system to maintain low-speed capability with a highly loaded, cruise-efficient wing. Previous research showed that the control scheme for the high-lift propellers was a crucial factor to enable an adequate balance between stabilized glideslope control and appropriate lift margin during the approach-to-landing phase of flight. This paper expands the high-lift propeller control considerations to include all phases of low-speed flight, including preflight, taxi, takeoff, initial climb, approach, and landing. Two control modes, termed airspeed and fixed mode, are developed in this paper. The airspeed mode varies propeller torque based on equivalent airspeed to account for different phases of ground and flight operations. The fixed mode operates the high-lift propeller system at a fixed rotational speed to account for failures in the air data system, preflight checkout, and high-performance takeoff operations. Modeling of the high-lift propellers within the X-57 low-speed flight envelope shows that (1) the structural rotational speed limit of the propeller blades limits their effectiveness at higher altitudes and airspeeds, (2) the speed setting of the fixed mode is set by the maximum torque of the airspeed mode, and (3) minimizing the potential for windmilling in non-standard conditions sets the torque schedule at higher speeds. Additionally, the fixed mode is shown to provide an increased climb rate during normal takeoff operations.

Nicholas K. Borer↗

Testing of Advanced Capabilities to Enable In-time Safety Management and Assurance for Future Flight Operations

In order to refine an initial Concept of Operations, explore Concepts of Use, and expose/validate requirements for future In-Time Aviation Safety Management Systems (IASMS), testing architectures were created, along with a set of capabilities and underlying information exchange protocols. These systems were conceived and developed based on hazards associated with two envisioned urban area flight domains: (1) highly autonomous small uncrewed aerial systems (sUAS) operating at low altitudes, and (2) highly autonomous air taxis. The initial scope of this development is described in [1]; this report provides an update, focusing on the subsequent developments and test activities. As stated in [1], it is important to note that there are many capabilities already in use by the industry (or soon to be in use) that will play critical roles in future IASMS designs. Those reported here were developed to address a gap in the current state-of-the-art regarding specific hazards/risks, and/or to allow for investigation of the interplay between and across hazard types — particularly regarding how overall safety risk can be reduced or managed effectively. Results of testing and development activities are organized by the operational phase wherein a particular capability would be employed (i.e., preflight, in-flight, and post-flight/off-line). Pre-flight: A set of capabilities were developed to help mitigate safety risk prior to flight (e.g., during flight and mission planning). Results of testing summarize (1) validation activities to raise the Technology Readiness Level (TRL) and (2) evaluation activities where the capabilities were applied to flight/mission planning procedures and used by operators/pilots. For the latter, flight plans were automatically assessed, and operators/pilots were notified of hazardous flight segments so as to enable adjustment of the flight plan and re-evaluation, and/or to better inform go/no-go decisions. Capabilities addressed hazards associated with power consumption, third-party risk, wind, navigation system performance, radiofrequency interference, and proximity to geo-spatial threats (e.g., buildings, trees, and no-fly zones). In-flight: Flight experiments tested capabilities that detect and respond to hazards encountered during flight. In the first series, safety hazards were monitored and assessed onboard, and system-generated mitigation maneuvers were recorded (but not acted upon by the vehicle). In the second series, mitigation maneuver commands directed the aircraft in response to safety hazards (i.e., auto-mitigation). The sUAS used for testing is described in full, as is the test architecture, which included commercial avionics, research avionics, and onboard software designed to detect, assess, and respond to hazards. The onboard system was designed as a run-time assurance framework, consistent with [2] and supportive of both supervisory and automated modes. The primary functions included: real-time risk assessment (RTRA), auto-pilot monitoring, constraint monitoring, and contingency select/triggering. RTRA performs integrated risk assessment considering data from several hazard-related monitors (e.g., battery, motors, navigation, communications, population density, and loss-of-control). Post-flight/off-line: Data monitored and recorded during flights can enable IASMS capabilities that execute after flights have completed (or “off-line”). These include: (1) the ability to identify anomalies and trends that may only be observable when comparing data spanning a number of similar flights; (2) the ability to update and validate pre-flight and in-flight capabilities and any underlying models to improve their performance; (3) the ability to report anomalies/off-nominals that may indicate design changes or maintenance actions are needed; and (4) the ability for humans involved in operations to report safety-relevant observations to help in understanding the flight data and/or the operational context of a flight. Progress on three such capabilities is summarized; the first investigates anomaly detection given a limited set of flight logs and applies an approach previously used for space operations. The second explores what could be identified using a larger set of flight logs, including from web-based forums where flight logs are posted by sUAS autopilot users. The third creates a new means of collecting information on UAS incidents and accidents via the Aviation Safety Reporting System (ASRS).

sUAS↗

Effects of Ambient High Temperature Exposure on Alumina-Titania High Emittance Surfaces for Solar Dynamic Systems

Solar dynamic (SD) space power systems require durable, high emittance surfaces on a number of critical components, such as heat receiver interior surfaces and parasitic load radiator (PLR) elements. To enhance surface characteristics, an alumina-titania coating has been applied to 500 heat receiver thermal energy containment canisters and the PLR of NASA Lewis Research Center's (LeRC) 2 kW SD ground test demonstrator (GTD). The alumina-titania coating was chosen because it had been found to maintain its high emittance under vacuum (less than or equal to 10(exp -6) torr) at high temperatures (1457 F (827 C)) for an extended period (approximately 2,700 hours). However, preflight verification of SD systems components, such as the PLR require operation at ambient pressure and high temperatures. Therefore, the purpose of this research was to evaluate the durability of the alumina-titania coating at high temperature in air. Fifteen of sixteen alumina-titania coated Incoloy samples were exposed to high temperatures (600 F (316 C) to l500 F (816 C)) for various durations (2 to 32 hours). Samples, were characterized prior to and after heat treatment for reflectance, solar absorptance, room temperature emittance and emittance at 1,200 F (649 C). Samples were also examined to detect physical defects and to determine surface chemistry using optical microscopy, scanning electron microscopy operated with an energy dispersive spectroscopy (EDS) system, and x ray photoelectron spectroscopy (XPS). Visual examination of the heat-treated samples showed a whitening of samples exposed to temperatures of 1,000 F (538 C) and above. Correspondingly, the optical properties of these samples had degraded. A sample exposed to 1,500 F (816 C) for 24 hours had whitened and the thermal emittance at 1,200 F (649 C) had decreased from the non-heat treated value of 0.94 to 0.62. The coating on this sample had become embrittled with spalling off the substrate noticeable at several locations. Based on this research it is recommended that preflight testing of SD components with alumina-titania coatings be restricted to temperatures no greater than 600 F (316 C) in air to avoid optical degradation. Moreover, components with the alumina-titania coating are likely to experience optical property degradation with direct atomic oxygen exposure in space.

deGroh, Kim K.↗

Apollo 15 mission report. Supplement 2: Service propulsion system final flight evaluation

The command and service module 112 service propulsion system performance for the Apollo 15 mission was evaluated and found to be satisfactory. The following items were considered: (1) the steady-state performance as determined from analysis of the third and eight burns; (2) techniques, problems, and assumptions; (3) flight analysis results as compared to the preflight predicted performance; (4) the propellant utilization and gaging system operation; (5) the pressurization system performance; (6) transient data; and (7) revision of estimated propellant consumption.

Smith, R. J.↗

The Earth Radiation Budget Experiment nonscanner instrument

Two Earth Radiation Budget Experiment (ERBE) nonscanner instruments are flying with companion scanner instruments to measure the earth's energy budget from low earth orbit. A third set of instruments will be launched in March 1986. This program is the first designed to make a comprehensive set of highly accurate measurements of the earth's energy budget on the spectral, spatial, and temporal scales specified by the scientific community for use in climatological research. The ERBE nonscanner combines the use of the highly accurate active cavity radiometer (ACR) detector with a comprehensive preflight calibration and characterization program and a design which includes operational flexibility and in-flight calibration checks to achieve and maintain, throughout its 2-year design life, a measurement accuracy capability not previously possible. This paper describes the ERBE nonscanner instrument, its operation, calibration, and mission profile.

Luther, M. R.↗

Space shuttle engineering and operations support. Separation operational limits for ALT free flights 1 through 5

The orbiter/SCA separation operational limits for the current target conditions of ALT free flights 1 through 5 are analyzed. The separation operational limits are used to verify that no separation design constraints are violated. The operational limits represent the acceptable dispersions in attainment of separation target conditions which assure safe separation. Safe separation is based on satisfying all specified separation design criteria except orbiter altitude at ALT interface airspeed. Separation operational limits are defined for each of the five orbiter tailcones on ALT free flight missions based upon preflight aerodynamics. The effect of carrier pilot steering compensation due to off-nominal flight conditions is determined to be within the separation operational limits.

Seale, R. H.↗

Risk of Impaired Performance Due to Reduced Muscle Mass, Strength &, Endurance (Short Title: Muscle) and Risk of Reduced Physical Performance Capabilities Due to Reduced Aerobic Capacity (Short Title: Aerobic)

This report reviews the scientific literature regarding the human system risks to the microgravity environment of space flight in relation to human performance. The primary human performance-related risks involve deconditioning of the cardiovascular and skeletal muscles systems due to prolonged exposure to the reduced gravitational input. The chronological history of U.S. space flight is reviewed as a starting point to inform and understand the gaps in the knowledge to these risks. Maintenance of physical performance capabilities involves understanding the health of many organ systems (peripheral [vascular, heart, blood volume, skeletal muscle] and central [brain]) that ultimately contribute to the submaximal and maximal capacity of the aerobic (VO2peak), skeletal muscle (strength and endurance) systems. Maintaining astronaut VO2peak, muscle mass, strength, and endurance before, during, and after space flight is a significant priority to NASA for the current International Space Station (ISS) era, as well as for future exploration missions. A growing research database from both space flight and ground-based analog studies finds that the cardiorespiratory system is compromised and skeletal muscles (predominantly postural muscles of the lower limbs) undergo atrophy. These structural and metabolic responses to living in microgravity conditions contribute to physiological deconditioning during space flight that potentially increase the risks to astronauts returning to surface operations (i.e., Moon, Mars, or Earth). The time course changes from short to long-duration space flight and the relationships between in-flight performance deconditioning levels are not well characterized. Moreover, there are large interindividual variabilities that may be dependent on genetics, age, sex, preflight fitness levels, and individual exercise prescriptions that need further careful evaluations. Efforts should be made to understand the current status of preflight, in-flight, and postflight exercise performance capability and to define the operational goals and target areas for protection with the in-flight exercise program. There is a bi-directional relationship between exercise prescription and hardware countermeasures that need further understanding in-flight. For example, hardware with limited capabilities/modalities may be counterbalanced by changes in exercise prescription (i.e., frequency, time, intensity, volume) for providing effective responses to maintain fitness. Importantly, the minimal requirements for exercise prescription on ISS hardware may not translate to lower capability hardware on exploration missions. Due to limited volume on exploration vehicles, future Artemis missions to the Lunar surface will not have similar exercise hardware capabilities as ISS. This may alter the effectiveness of hardware to provide adequate physiological stress on bodily systems allowing for adaptations to maintain aerobic capacity, strength, and bone density. Thus, it will be important to understand the exercise responses of current ISS countermeasures to develop individualized exercise prescriptions that minimize aerobic and muscular risks, accounting for the large variability of responses among crewmembers. Newer exploration exercise hardware is currently being evaluated that is more compact (i.e., E4D and Orion Flywheel) and will require careful evaluation of the hardware on the stressor (i.e., metabolic rate, oxygen uptake, and heart rate work relationships, and force plate load profiles) needed the human body to protect and maintain crew health and performance. Moreover, exercise responses on the hardware need careful evaluation on the chronic adaptations. Lastly, in-flight evaluation of hardware exercise response may differ in 0-g or partial-g compared to 1-g. Therefore, it cannot be assumed that the stress on the body will be the same in each environment. Understanding this has a direct impact on exercise prescriptions. This document provides an overview of key scientific investigations that have been conducted before, during, and after human space flight missions, as well as from human ground-based analog studies that contribute to the evidence base on changes in aerobic capacity and muscle mass, strength, and endurance. Additional data from rodent and nonhuman primate experiments of skeletal muscle unloading completed during space flight or ground-based flight-simulations provide supportive information about this risk topic. Most importantly, a recent, large dataset from long-duration ISS crew has been added to give improved insight into the variability of exercise response of crew, demonstrating that a large portion of the crew population return to Earth with greater than 10-20% loss of aerobic capacity and muscle strength and endurance. Data from human space flight and ground-based studies are narrowing in on the required exercise paradigms but thus far still provide an incomplete answer to an effective approach for maintaining skeletal muscle function and aerobic fitness of all human space travelers. Finally, the relationship of this risk topic to various space flight operational scenarios is examined and discussed.

Eric Rivas↗