Search NASA⌕ Search

SEARCH · Search NASA

Results for “Park model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

A consistent model reduction of measured modal parameters for reduced-order active control

The problem of synthesizing reduced-order linear models of vibrating structures for the design of fixed-order dynamic feedback control is investigated. The present technique builds on a recently developed procedure for constructing an objective set of mass and stiffness matrices from measured modal parameters that are akin to the Craig-Bampton synthesized ones obtained from finite element models. The constructed mass and stiffness matrices are determined directly from the identification of experimental data, however, rather than through correlation or reconciliation of a finite element model. A model truncation criterion is then applied to the identified minimum-order mass and stiffness model to satisfy certain observability/controllability requirements for the reduced model. Numerical examples illustrate the effectiveness of the proposed technique for synthesizing reduced-order controllers from system realizations of experimental data. The dynamic performance of the resulting closed-loop models is assessed using the known full-order structural dynamics and compared with existing model reduction techniques.

Alvin, K. F.↗
NASA NTRS2003

High Temperature Permeability of Carbon Cloth Phenolic Composite

The carbon fiber phenolic resin composite material used for the RSRM nozzle insulator occasionally experiences problems during operation from pocketing or spalling-like erosion and lifting of plies into the char layer. This phenomenon can be better understood if the permeability of the material at elevated temperatures is well defined. This paper describes an experimental approach to determining high temperature permeability of the carbon phenolic material used as the RSRM nozzle liner material. Two different approaches were conducted independently using disk and bar type specimens with the designed permeability apparatus. The principle of the apparatus was to subject a test specimen to a high pressure differential and a heat supply and to monitor both the pressure and temperature variations resulting from gas penetration through the permeable wall between the two chambers. The bar types, especially designed to eliminate sealing difficulties at a high temperature environment, were directly exposed to real time temperature elevation from 22 C to 260 C during the test period. The disk types were pre-heat treated up to 300 C for 8 hours and cooled to room temperature before testing. Nonlinear variation of downstream pressure at a certain temperature range implied moisture release and matrix pyrolysis. Permeability was calculated using a semi-numerical model of quasi-steady state. The test results and the numerical model are discussed in the paper.

Park, O. Y.↗
NASA NTRS2007

Evaluation of Integrating the Invasive Species Forecasting System to Support National Park Service Decisions on Fire Management Activities and Invasive Plant Species Control

The USGS and NASA, in conjunction with Colorado State University, George Mason University and other partners, have developed the Invasive Species Forecasting System (ISFS), a flexible tool that capitalizes on NASA's remote sensing resource to produce dynamic habitat maps of invasive terrestrial plant species across the United States. In 2006 ISFS was adopted to generate predictive invasive habitat maps to benefit noxious plant and fire management teams in three major National Park systems: The Greater Yellowstone Area (Yellowstone / Grand Tetons National Parks), Sequoia and Kings Canyon National Park, and interior Alaskan (between Denali, Gates of The Arctic and Yukon-Charley). One of the objectives of this study is to explore how the ISFS enhances decision support apparatus in use by National Park management teams. The first step with each park system was to work closely with park managers to select top-priority invasive species. Specific species were chosen for each study area based on management priorities, availability of observational data, and their potential for invasion after fire disturbances. Once focal species were selected, sources of presence/absence data were collected from previous surveys for each species in and around the Parks. Using logistic regression to couple presence/absence points with environmental data layers, the first round of ISFS habitat suitability maps were generated for each National Park system and presented during park visits over the summer of 2006. This first engagement provided a demonstration of what the park service can expect from ISFS and initiated the ongoing dialog on how the parks can best utilized the system to enhance their decisions related to invasive species control. During the park visits it was discovered that separate "expert opinion" maps would provide a valuable baseline to compare against the ISFS model output. Opinion maps are a means of spatially representing qualitative knowledge into a quantitative two-dimensional map. Furthermore, our approach combines the qualitative expert opinion habitat maps -- with the quantitative ISFS habitat maps in a difference map that shows where the two maps agree and disagree. The objective of the difference map is to help focus future field sampling and improve model results. This paper presents a demonstration of the habitat, expert opinion, and difference map for Yellowstone National Park.

Ma, Peter↗
NASA NTRS1983

Space station needs, attributes and architectural options. Part 1: Summary

Candidate missions for the space station were subjected to an evaluation/filtering process which included the application of budgetary constraints and performance of benefits analysis. Results show that the initial space station should be manned, placed in a 28.5 deg orbit, and provide capabilities which include a space test facility, satellite service, a transport harbor, and an observatory. A space industrial park may be added once further development effort validates the cost and expanding commercial market for space-processed material. Using the space station as a national space test facility can enhance national security, as well as commercial and scientific interests alike. The potential accrued gross mission model benefit derived from these capabilities is $5.9B without the industrial park, and $9.3B with it. Other benefits include the lowering of acquisition costs for NASA and DoD space assets and a basis for broadening international participation.

Source record↗
NASA NTRS1981

Pursuit/evasion in orbit

Maneuvers available to a spacecraft having sufficient propellant to escape an antisatellite satellite (ASAT) attack are examined. The ASAT and the evading spacecraft are regarded as being in circular orbits, and equations of motion are developed for the ASAT to commence a two-impulse maneuver sequence. The ASAT employs thrust impulses which yield a minimum-time-to-rendezvous, considering available fuel. Optimal evasion is shown to involve only in-plane maneuvers, and begins as soon as the ASAT launch information is gathered and thrust activation can be initiated. A closest approach, along with a maximum evasion by the target spacecraft, is calculated to be 14,400 ft. Further research to account for ASATs in parking orbit and for generalization of a continuous control-modeled differential game is indicated.

Kelley, H. J.↗
NASA NTRS1994

A Study of High Altitude Hypersonic Flow-Field Radiation

This paper presents the results of the works carried out jointly at Stanford University and Ames Research Center under a grant from the Ballistic Missile Defense Organization (BMDO) (formerly the Strategic Defense Initiative Organization) to explain and understand the results of the two flight experiments, Bow Shock Ultra-Violet 1 and Bow Shock Ultra-Violet 2, carried out by the Organization. A portion of the material contained in this paper has been reported elsewhere in open literature. However, this paper provides (1) the details of scientific contents not available in those literature, (2) the links among those and the logical order of the efforts involved, and (3) some materials not contained in any open literature. The first author is responsible for execution of the work; the second author directed the work of the first author. In the two flight experiments mentioned above, the spectra of radiation in the ultraviolet wavelength range incident on the stagnation point of a blunt body were measured at the flight speeds of 3.8 and 5.2 km/sec over a wide range of altitudes. The results were compared first with the calculations made using the original version of the NEQAIR/STRAP codes written earlier by the second author. At low altitudes, the calculations agreed with the measurement. However, at high altitudes, the calculations underestimated the intensity of the radiation by several orders of magnitudes. A shock tube experiment was carried out at CALSPAN and a plasma-torch experiment was carried out at Stanford University to produce experimental data to help explain the discrepancy. In addition, the shock tube experiment at Ames Research Center carried out independently of the BMDO was also found to be relevant to this question. In this paper, several theoretical models are developed and calculations using the models were carried out to explain the results not only of the flight experiments but also of the CALSPAN, Stanford, and Ames experiments. The are: (1) the diffusion model for the rotational mode to explain the slowness of rotational excitation, (2) assignment of different vibrational temperatures and different relaxation rates for different molecules, and (3) the modification of the NEQAIR code to accommodate the new experimental data. This paper shows that the discrepancy between the flight data and calculation is smaller with the present model, but is still substantial.

Moreau, Stephane↗
NASA NTRS2004

Simulation of Foam Impact Effects on Components of the Space Shuttle Thermal Protection System

A series of three dimensional simulations has been performed to investigate analytically the effect of insulating foam impacts on ceramic tile and reinforced carbon-carbon components of the Space Shuttle thermal protection system. The simulations employed a hybrid particle-finite element method and a parallel code developed for use in spacecraft design applications. The conclusions suggested by the numerical study are in general consistent with experiment. The results emphasize the need for additional material testing work on the dynamic mechanical response of thermal protection system materials, and additional impact experiments for use in validating computational models of impact effects.

Fahrenthold, Eric P.↗
NASA NTRS1994

Lifetimes of lunar satellite orbits

The Space Exploration Initiative has generated a renewed interest in lunar mission planning. The lunar missions currently under study, unlike the Apollo missions, involve long stay times. Several lunar gravity models have been formulated, but mission planners do not have enough confidence in the proposed models to conduct detailed studies of missions with long stay times. In this report, a particular lunar gravitational model, the Ferrari 5 x 5 model, was chosen to determine the lifetimes for 100-km and 300-km perilune altitude, near-circular parking orbits. The need to analyze orbital lifetimes for a large number of initial orbital parameters was the motivation for the formulation of a simplified gravitational model from the original model. Using this model, orbital lifetimes were found to be heavily dependent on the initial conditions of the nearly circular orbits, particularly the initial inclination and argument of perilune. This selected model yielded lifetime predictions of less than 40 days for some orbits, and other orbits had lifetimes exceeding a year. Although inconsistencies and limitations are inherent in all existing lunar gravity models, primarily because of a lack of information about the far side of the moon, the methods presented in this analysis are suitable for incorporating the moon's nonspherical gravitational effects on the preliminary design level for future lunar mission planning.

Meyer, Kurt W.↗
NASA NTRS1993

Linear mixing model applied to AVHRR LAC data

A linear mixing model was applied to coarse spatial resolution data from the NOAA Advanced Very High Resolution Radiometer. The reflective component of the 3.55 - 3.93 microns channel was extracted and used with the two reflective channels 0.58 - 0.68 microns and 0.725 - 1.1 microns to run a Constraine Least Squares model to generate vegetation, soil, and shade fraction images for an area in the Western region of Brazil. The Landsat Thematic Mapper data covering the Emas National park region was used for estimating the spectral response of the mixture components and for evaluating the mixing model results. The fraction images were compared with an unsupervised classification derived from Landsat TM data acquired on the same day. The relationship between the fraction images and normalized difference vegetation index images show the potential of the unmixing techniques when using coarse resolution data for global studies.

Holben, Brent N.↗
NASA NTRS1992

Small-kernel, constrained least-squares restoration of sampled image data

Following the work of Park (1989), who extended a derivation of the Wiener filter based on the incomplete discrete/discrete model to a more comprehensive end-to-end continuous/discrete/continuous model, it is shown that a derivation of the constrained least-squares (CLS) filter based on the discrete/discrete model can also be extended to this more comprehensive continuous/discrete/continuous model. This results in an improved CLS restoration filter, which can be efficiently implemented as a small-kernel convolution in the spatial domain.

Hazra, Rajeeb↗
NASA NTRS2017

Augmented Method to Improve Thermal Data for the Figure Drift Thermal Distortion Predictions of the JWST OTIS Cryogenic Vacuum Test

The JWST Optical Telescope Element (OTE) assembly is the largest optically stable infrared-optimized telescope currently being manufactured and assembled, and is scheduled for launch in 2018. The JWST OTE, including the 18 segment primary mirror, secondary mirror, and the Aft Optics Subsystem (AOS) are designed to be passively cooled and operate near 45K. These optical elements are supported by a complex composite backplane structure. As a part of the structural distortion model validation efforts, a series of tests are planned during the cryogenic vacuum test of the fully integrated flight hardware at NASA JSC Chamber A. The successful ends to the thermal-distortion phases are heavily dependent on the accurate temperature knowledge of the OTE structural members. However, the current temperature sensor allocations during the cryo-vac test may not have sufficient fidelity to provide accurate knowledge of the temperature distributions within the composite structure. A method based on an inverse distance relationship among the sensors and thermal model nodes was developed to improve the thermal data provided for the nanometer scale WaveFront Error (WFE) predictions. The Linear Distance Weighted Interpolation (LDWI) method was developed to augment the thermal model predictions based on the sparse sensor information. This paper will encompass the development of the LDWI method using the test data from the earlier pathfinder cryo-vac tests, and the results of the notional and as tested WFE predictions from the structural finite element model cases to characterize the accuracies of this LDWI method.

Thermal Modeling↗
NASA NTRS1986

Nightside plasmapause positions observed by DE-1 as a function of geomagnetic indices - Comparison with whistler observations and model calculations

The paper analyzes 28 plasmapause crossings made by the DE1 satellite in the night local time sector (from January to March 1982). Different signatures obtained by the Retarding Ion Mass Spectrometer instrument have been used for this analysis. The observed plasmapause positions (Lpp) have been organized as a function of geomagnetic indices. They are compared with the empirical relationship deduced by Carpenter and Parks (1973) from whistler observations. Moreover, the dependence of Lpp versus Kp has been inferred from model calculations using Kp dependent electric and magnetic fields derived from McIlwain's (1974) E3H electric field model and M2 magnetic field model respectively. Stationary models as well as time dependent ones, have been used to determine the positions of the plasmapause. The results of the model calculations are compared to the observations.

Decreau, P. M. E.↗
NASA NTRS2006

Interactive Visualization of Parking Orbits Around the Moon: An X3D Application for a NASA Lunar Mission Study

The NASA Integrated Modeling and Simulation (IM&S) project aims to develop a collaborative engineering system to include distributed analysis, integrated tools, and web-enabled graphics. Engineers on the IM&S team were tasked with applying IM&S capabilities to an orbital mechanics analysis for a lunar mission study. An interactive lunar globe was created to show 7 landing sites, contour lines depicting the energy required to reach a given site, and the optimal lunar orbit orientation to meet the mission constraints. Activation of the lunar globe rotation shows the change of the angle between the landing site latitude and the orbit plane. A heads-up-display was used to embed straightforward interface elements.

Murphy, Douglas G.↗
NASA NTRS1974

Water-management models in Florida from ERTS-1 data

A prototype multiparameter data acquisition network, installed and operated by the U.S. Geological Survey is a viable approach for obtaining near real-time data needed to solve hydrologic problems confronting nearly 2.5 million residents of south Florida. Selected water quantity and quality data obtained from ground stations are transmitted for relay via ERTS-1 to NASA receiving stations in virtual real time. This data relay system has been very reliable and, by coupling the ground information with ERTS imagery, a modeling technique is available for water resource management in south Florida. An ecological model has been designed for the Shark River Slough in Everglades National Park.

Higer, A. L.↗