Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pd-based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Electrochemical production of H 2 O 2 on palladium-based clusters driven by metal–support interaction

Utilizing palladium (Pd) clusters as active sites offers a promising route to minimize noble metal consumption in electrochemical hydrogen peroxide (H 2 O 2 ) production. In this work, we present a synthesis approach for anchoring Pd-based clusters onto carbon-supported CeO 2 nanosubstrates to enable efficient H 2 O 2 generation via the two-electron oxygen reduction reaction (ORR) pathway. By systematically adjusting Pd loading, we evaluated its impact on H 2 O 2 yield and production rate. The catalyst with the lowest Pd content (0.027 wt%) exhibited outstanding performance, achieving 97% H 2 O 2 selectivity, 94.2 faradaic efficiency at 0.7 V vs. RHE, and a peak production rate of 195.8 mol g Pd −1 h −1 . A formulation containing 0.35 wt% Pd delivered a peak ORR mass activity nearly three times as high as that of commercial 10 wt% Pd/C, while retaining comparable electrochemical stability. These enhancements are attributed to synergistic effects among isolated PdO clusters, CeO 2 nanocrystals, and the conductive carbon support, which together facilitate oxygen adsorption and promote the two-electron ORR pathway. Analysis after accelerated durability testing further revealed a tendency toward cluster agglomeration and mass transfer from smaller to larger nanocrystals, indicative of a coarsening mechanism. Overall, this study underscores the promise of low-Pd PdO–CeO 2 –carbon hybrid catalysts for scalable and efficient H 2 O 2 electrosynthesis, while highlighting stability as a critical area for future improvement.

36 MATERIALS SCIENCE↗

Effect of Viscosity on the Microformability of Bulk Amorphous Alloy in Supercooled Liquid Region

Previously published results have shown that viscosity greatly influences on the deformation behavior of the bulk amorphous alloy in supercooled liquid region during microforming process. And viscosity is proved to be a component of the evaluation index which indicating microformability. Based on the fluid flow theory and assumptions, bulk amorphous alloy can be regarded as the viscous materials with a certain viscosity. It is helpful to understand how the viscosity plays an important role in viscous materials with various viscosities by numerical simulation on the process. Analysis is carried out by linear state equation in FEM with other three materials, water, lubricant oil and polymer melt, whose viscosities are different obviously. The depths of the materials flow into the U-shaped groove during the microimprinting process are compared in this paper. The result shows that the deformation is quite different when surface tension effect is not considered in the case. With the lowest viscosity, water can reach the bottom of micro groove in a very short time. Lubricant oil and polymer melt slower than it. Moreover bulk amorphous alloys in supercooled liquid state just flow into the groove slightly. Among the alloys of different systems including Pd-, Mg- and Zr-based alloy, Pd-based alloy ranks largest in the depth. Mg-based alloy is the second. And Zr-based alloy is the third. Further more the rank order of the viscosities of the alloys is Pd-, Mg- and Zr-based. It agrees well with the results of calculation. Therefore viscosity plays an important role in the microforming of the bulk amorphous alloy in the supercooled liquid state.

36 MATERIALS SCIENCE↗

Effect of substitutional defects on Kambersky damping in L1{sub 0} magnetic materials

Kambersky damping, representing the loss of magnetic energy from the electrons to the lattice through the spin orbit interaction, is calculated for L1{sub 0} FePt, FePd, CoPt, and CoPd alloys versus chemical degree of order. When more substitutional defects exist in the alloys, damping is predicted to increase due to the increase of the spin-flip channels allowed by the broken symmetry. It is demonstrated that this corresponds to an enhanced density of states (DOS) at the Fermi level, owing to the rounding of the DOS with loss of long-range order. Both the damping and the DOS of the Co-based alloy are found to be less affected by the disorder. Pd-based alloys are predicted to have lower damping than Pt-based alloys, making them more suitable for high density spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic properties and atomic bonding character in metallic glasses

The elastic properties of glasses from different metallic systems were studied in the light of the atomic packing density and bonding character. We found that the electronegativity mismatch (Δe{sup −}) between the host- and the major solute-elements provides a plausible explanation to the large variation observed for Poisson's ratio (ν) among metallic glasses (MGs) (from 0.28 for Fe-based to 0.43 for Pd-based MGs), notwithstanding a similar atomic packing efficiency (C{sub g}). Besides, it is found that ductile MGs correspond to Δe{sup −} smaller than 0.5 and to a relatively steep atomic potential well. Ductility is, thus, favored in MGs exhibiting a weak bond directionality on average and opposing a strong resistance to volume change.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Palladium oxidation leads to methane combustion activity: Effects of particle size and alloying with platinum

Pd- and Pt-based catalysts are highly studied materials due to their widespread use in emissions control catalysis. However, claims continue to vary regarding the active phase and oxidation state of the metals. Different conclusions have likely been reached due to the heterogeneous nature of such materials containing various metal nanoparticle sizes and compositions, which may each possess unique redox features. In this work, using uniform nanocrystal catalysts, we study the effect of particle size and alloying on redox properties of Pd-based catalysts and show their contribution to methane combustion activity using operando quick extended x-ray absorption fine structure measurements. Results demonstrate that for all studied Pd sizes (3 nm–16 nm), Pd oxidation directly precedes CH 4 combustion to CO 2 , suggesting Pd oxidation as a prerequisite step to methane combustion, and an oxidation pretreatment shows equal or better catalysis than a reduction pretreatment. Results are then extended herein to uniform alloyed Pt x Pd 1–x nanoparticles, where oxidative pretreatments are shown to enhance low-temperature combustion. In these uniform alloys, we observe a composition-dependent effect with Pt-rich alloys showing the maximum difference between oxidative and reductive pretreatments. In Pt-rich alloys, we initially observe that the presence of Pt maintains Pd in a lower-activity reduced state. However, with time on stream, PdO eventually segregates under oxidizing combustion conditions, leading to a slowly increasing activity. Overall, across particle sizes and alloy compositions, we relate increased catalytic activity to Pd oxidation, thus shedding light on previous contrasting results related to the methane combustion activity of these catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pulsed-laser epitaxy of metallic delafossite PdCrO 2 films

Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO 2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of delafossites may enable not only the tuning of the basic physical properties beyond what bulk materials can exhibit, but also the development of novel hybrid materials by interfacing with dissimilar materials, yet this has proven to be extremely challenging. Here, we report the epitaxial growth of metallic delafossite PdCrO 2 films by pulsed laser epitaxy (PLE). The fundamental role of the PLE growth conditions, epitaxial strain, and chemical and structural characteristics of the substrate is investigated by growing under various growth conditions and on various types of substrates. While strain plays a large role in improving the crystallinity, the direct growth of epitaxial PdCrO 2 films without impurity phases was not successful. We attribute this difficulty to both the chemical and structural dissimilarities with the substrate and volatile nature of the PdO sublayer, which make nucleation of the right phase difficult. This difficulty was overcome by growing CuCrO 2 buffer layers before PdCrO 2 films were grown. Unlike PdCrO 2 , CuCrO 2 films were readily grown with a relatively wide growth window. Only a monolayer thick buffer layer was sufficient to grow the correct PdCrO 2 phase. This result indicates that the epitaxy of Pd-based delafossites is extremely sensitive to the chemistry and structure of the interface, necessitating near perfect substrate materials. The resulting films are commensurately strained and show an antiferromagnetic transition at 40 K that persists down to as thin as 3.6 nm in thickness. This work provides key insights into advancing the epitaxial growth of the broader class of metallic delafossites for both studying the basic physical properties and developing new spintronic and computing devices.

36 MATERIALS SCIENCE↗

The impact of helium on plasma-driven hydrogen permeation and implications for direct internal recycling in the fusion fuel cycle

Abstract Metal foil pumps (MFPs) are the leading technology for direct internal recycling (DIR) of hydrogen isotopes from the plasma exhaust in future fusion plants. MFPs rely on the concept of superpermeation, where superthermal H atoms directly absorb into the metal foil, rapidly diffuse, and desorb downstream. To date, studies of superpermeation have predominantly employed either pure hydrogen or in some cases trace levels of impurities. The plasma exhaust is expected to contain just ∼1% helium, but in DIR the source gas would be enriched in helium as hydrogen isotopes are extracted. In this work, we explore the impact of helium on hydrogen superpermeation at low temperature (75 °C–200 °C) using Pd-based foils. To first order, the flux scaled linearly with the hydrogen mole fraction. Stable permeation was observed until the helium fraction reached ∼80%, where the flux began to decline slowly with time. In addition, short term (1–5 min) exposure to pure helium plasma significantly attenuated subsequent hydrogen plasma permeation, and the degree was more dramatic at elevated temperature. This attenuation was correlated with He retention in the foils, which was detected by time-of-flight secondary ion mass spectrometry at low levels (<0.1 at. %) and limited to the near surface (<10 nm). Similar trends were observed among all alloys (Pd, PdAg, PdCu), and the foils were restored to full performance with an Ar + sputter clean. The potential for helium plasma exposure to impact MFP performance under these conditions has not been previously reported, and these findings have significant implications to the design and implementation of practical DIR systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Joining of SiC Fiber-Bonded Ceramics using Silver, Copper, Nickel, Palladium, and Silicon-Based Alloy Interlayers

SiC fiber-bonded ceramics, SA-Tyrannohex, (SA-THX) with perpendicular and parallel fiber orientations were brazed using Ag-, Ni- and Pd-base brazes, and four Si X (X: Ti, Cr, Y, Ta) eutectics. Outcomes were variable, ranging from bonded joints through partially bonded to un-bonded joints. Prominent Ti- and Si-rich interfaces developed with Cusil-ABA, Ticusil, and Copper-ABA and Ni- and Si-rich layers with MBF-20. Stress rupture tests at 650 and 750 C on Cusil-ABA-bonded joints revealed a temperature-dependent behavior for the perpendicular joints but not for the parallel joints with failure occurring at brazed interface. Higher-use temperatures can be targeted with eutectic Si Ti and Si Cr alloys.

brazing↗

Palladium-tin catalysts for the direct synthesis of H 2 O 2 with high selectivity

The direct synthesis of hydrogen peroxide (H 2 O 2 ) from H 2 and O 2 represents a potentially atom-efficient alternative to the current industrial indirect process. We show that the addition of tin to palladium catalysts coupled with an appropriate heat treatment cycle switches off the sequential hydrogenation and decomposition reactions, enabling selectivities of >95% toward H 2 O 2 . This effect arises from a tin oxide surface layer that encapsulates small Pd-rich particles while leaving larger Pd-Sn alloy particles exposed. In conclusion, we show that this effect is a general feature for oxide-supported Pd catalysts containing an appropriate second metal oxide component, and we set out the design principles for producing high-selectivity Pd-based catalysts for direct H 2 O 2 production that do not contain gold.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composite Pd and Pd Alloy Porous Stainless Steel Membranes for Hydrogen Production and Process Intensification

The synthesis of composite Pd membranes has been modified by the addition of an Al(OH) 3 graded layer and sequential annealing at high temperatures to obtain membranes with high permeance and outstanding selectivity stability for over 4000 hours at 450°C. Most of the membranes achieved in this work showed H 2 flux well above 2010 DOE targets and in some case, also above 2015 DOE targets. Similar composite membranes were tested in water gas shift reaction atmospheres and showed to be stable with high CO conversion and high hydrogen recovery for over 1000 hours. The H 2 permeance of composite Pd-Au membranes was studied as well as its resistance in H 2 S containing atmospheres. H 2 S poisoning of Pd-based membranes was reduced by the addition of Au and the loss undergone by membranes was found to be almost totally recoverable with 10-30 wt%Au. PSA technique was studied to test the possibility of H 2 S and COS removal from feed stream with limited success since the removal of H 2 S also led to the removal of a large fraction of the CO 2 . The economics of a WGS bundle reactor, using the information of the membranes fabricated under this project and integrated into an IGCC plant were studied based on a 2D reactor modeling. The calculations showed that without a government incentive to impose a CO 2 tax, application of WGS membrane reactors in IGCC would be not as economically attractive as regular pulverized coal plants.

08 HYDROGEN↗

Sorption Enhanced Mixed Matrix Membranes for Hydrogen (H 2 ) Purification and Carbon Dioxide (CO 2 ) Capture

The technical objective of this project was to develop sorption enhanced mixed matrix membranes with H 2 permeance of 500 gas permeance units (GPU) and H 2 /CO 2 selectivity of 30 at 150-200 °C. These membranes will be the central component in the design of membrane based systems for 90% capture of CO 2 from coal-derived syngas, with 95% CO 2 purity at a cost of electricity 30% less than baseline capture approaches. The unique approach in this proposal is to design crosslinked polymers containing Pd-based nanoparticles achieving strong H 2 sorption and size sieving ability and thus H 2 /CO 2 selectivity. The specific objectives for each budget period (BP) are described below. BP 1: Identify polymer matrix with strong size sieving ability and palladium (Pd)-containing nanomaterials to prepare freestanding mixed matrix films with H 2 permeability of 50 Barrer and H 2 /CO 2 selectivity of 30 at 150-200°C with simulated syngas. BP 2: Prepare and optimize thin film mixed matrix composite membranes materials with H 2 permeance of 500 GPU and H 2 /CO 2 selectivity of 30 at 150-200 °C, and complete the modification of the membrane test unit for the field test in the BP 3. BP 3: Conduct a 20-day field test of the membranes with real syngas at Center for Advanced Energy Research (CAER) of the University of Kentucky (UKy). During the BP2, we have successfully prepared thin-film composite (TFC) membranes based on mixed matrix materials (MMMs) containing Pd nanoparticles in polymers, and demonstrated their superior and robust performance for H 2 /CO 2 separation at 150 – 225 °C. (1) Production of the Pd based nanoparticles with a diameter of 4 nm has been scaled up to 200 mg/day. (2) We have prepared TFC membranes with H 2 permeance above 500 GPU and H 2 /CO 2 selectivity above 30 at temperatures up to 225 °C, which meet the targets for the BP2. (3) We have conducted parametric studies of TFC membranes with a mixed gas containing H 2 S and H 2 O and demonstrated the stability of the membranes. (4) We have established a new testing plan at the Center for Advanced Energy Studies (CAER) at the University of Kentucky because NCCC decided to shut down their gasifier. During this project, four Ph.D. students received the inter-disciplinary training and graduated, including Shailesh Konda, Maryam Omidvar, Deqiang Yin, and Lingxiang Zhu. One postdoctoral researcher (Dr. Liang Huang) and two Ph.D. students (Abhishek Kumar and Hien Nguyen) are involved in this project. The project leads to one provisional patent application, eight peer-reviewed articles, and one manuscript in preparation. The details are shown below.

01 COAL, LIGNITE, AND PEAT↗

STRUCTURAL INTERACTIONS OF HYDROGEN WITH BULK AMORPHOUS MICROSTRUCTURES IN METALLIC SYSTEMS UNDERSTANDING THE ROLE OF PARTIAL CRYSTALLINITY ON PERMEATION AND EMBRITTLEMENT

The development of metallic glasses in bulk form has led to a resurgence of interest into the utilization of these materials for a variety of applications. A potentially exciting application for these bulk metallic glass (BMG) materials is their use as composite membranes to replace high cost Pd/Pd-alloy membranes for enhanced gas separation processes. One of the major drawbacks to the industrial use of Pd/Pd-alloy membranes is that during cycling above and below a critical temperature an irreversible change takes place in the palladium lattice structure which can result in significant damage to the membrane. Furthermore, the cost associated with Pd-based membranes is a potential detractor for their continued use and BMG alloys offer a potentially attractive alternative. Several BMG alloys have been shown to possess high permeation rates, comparable to those measured for pure Pd metal. In addition, high strength and toughness when either in-situ or ex-situ second phase dispersoids are present. Both of these properties, high permeation and high strength/toughness, potentially make these materials attractive for gas separation membranes that could resist hydrogen 'embrittlement'. However, a fundamental understanding of the relationship between partially crystalline 'structure'/devitrification and permeation/embrittlement in these BMG materials is required in order to determine the operating window for separation membranes and provide additional input to the material synthesis community for improved alloy design. This project aims to fill the knowledge gap regarding the impact of crystallization on the permeation properties of metallic glass materials. The objectives of this study are to (i) determine the crystallization behavior in different gas environments of Fe and Zr based commercially available bulk metallic glass and (ii) quantify the effects of partial crystallinity on the hydrogen permeation properties of these metallic glass membranes.

08 HYDROGEN↗

Hydrogen Induced Abrupt Structural Expansion at High Temperatures of a Ni 32 Nb 28 Zr 30 Cu 10 Membrane for H 2 Purification

Ni-Nb-Zr amorphous membranes, prepared by melt-spinning, show great potential for replacing crystalline Pd-based materials in the field of hydrogen purification to an ultrapure grade (>99.999%). In this study, we investigate the temperature evolution of the structure of an amorphous ribbon with the composition Ni 32 Nb 28 Zr 30 Cu 10 (expressed in atom %) by means of XRD and DTA measurements. An abrupt structural expansion is induced between 240 and 300 °C by hydrogenation. This structural modification deeply modifies the hydrogen sorption properties of the membrane, which indeed shows a strong reduction of the hydrogen capacity above 270 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective catalytic reduction system and process using a pre-sulfated zirconia binder

A selective catalytic reduction (SCR) process with a palladium catalyst for reducing NOx in a gas, using hydrogen as a reducing agent is provided. The process comprises contacting the gas stream with a catalyst system, the catalyst system comprising (ZrO.sub.2)SO.sub.4, palladium, and a pre-sulfated zirconia binder. The inclusion of a pre-sulfated zirconia binder substantially increases the durability of a Pd-based SCR catalyst system. A system for implementing the disclosed process is further provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Palladium and platinum-based nanoparticle functional sensor layers for selective H2 sensing

The disclosure relates to a plasmon resonance-based method for H.sub.2 sensing in a gas stream utilizing a hydrogen sensing material. The hydrogen sensing material is comprises Pd-based or Pt-based nanoparticles having an average nanoparticle diameter of less than about 100 nanometers dispersed in an inert matrix having a bandgap greater than or equal to 5 eV, and an oxygen ion conductivity less than approximately 10.sup.-7 S/cm at a temperature of 700.degree. C. Exemplary inert matrix materials include SiO.sub.2, Al.sub.2O.sub.3, and Si.sub.3N.sub.4 as well as modifications to modify the effective refractive indices through combinations and/or doping of such materials. The hydrogen sensing material utilized in the method of this disclosure may be prepared using means known in the art for the production of nanoparticles dispersed within a supporting matrix including sol-gel based wet chemistry techniques, impregnation techniques, implantation techniques, sputtering techniques, and others.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic Layer Deposition for Enhanced Reactivity and Stability of Biomass Conversion Catalysts

Heterogeneous catalysts are an essential tool in the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions (e.g., high temperatures, acidity, oxidizing/reducing environments) of many key biomass conversion processes give rise to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Active site poisoning due to the relatively high sulfur content of most biomass feedstocks further compounds these durability problems. Next-generation catalysts must be developed to address these stability challenges. In this work, we used a scalable atomic layer deposition (ALD) process to modify conventional Pd-based hydrogenation catalysts to generate significant performance improvements. TiO2 ALD coatings were found to increase the activity of Pd/Al2O3 catalysts towards naphthalene hydrogenation; additionally, these coatings improved the catalyst's resistance to sulfur poisoning and thermal stability under oxidative calcination. Additional work in which Al2O3 ALD coatings were applied to Pd/TiO2 catalysts for muconic acid hydrogenation found similar stability benefits, including improved resistance to Pd leaching in the acidic environment. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts and this work constitutes an important examination of applying ALD coatings to supported Pd hydrogenation catalysts.

ALD↗

Spent Fuel Reprocessing Development and Usage of Fission Products as Starting Precursor for Ceramic Waste-Forms - 16498

The principal purpose of spent fuel reprocessing consists in the recovery of the uranium and plutonium and the separation of fission products so as to allow re-use of fissile isotopes and waste preparing for disposal. Reprocessing is a series of chemical operations that separates plutonium and uranium from other constituents in nuclear waste. Indeed, the plutonium separated can be used to fuel reactors, but also to make nuclear weapons. Since reprocessing operations are far more expensive than using uranium fuel and disposing of the spent fuel directly, this process is not readily considered. Without doubts the reprocessing price of $1000 per kilogram of heavy metal (kgHM), like uranium must be less by at least 2-3 times compared to directly deposing the spent fuel. And some more simple technology (in comparison with PUREX process) must be developed, for example, technology based on precipitation processes. One of the options to change reprocessing technology is the idea to use certain fission products occurring in spent fuel in considerable amount and capable to form insoluble substances as suitable materials for long-term storage or final disposal of radioactive wastes. The development of new materials for HLW immobilization are intended to reduce disposal cost. The present work was aimed at the search for the simple engineering decisions that would provide opportunity of fission products usage as starting precursor for ceramic waste-forms. The results of experiments on synthesis of Pd-based metallo-ceramic compositions are presented in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗