Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance Fluid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Implementation of rapid diagnostics assays for detection of histoplasmosis and cryptococcosis in central american people living with HIV

Abstract Objectives Histoplasmosis and cryptococcosis are important public health problems in people living with HIV (PLHIV) in Central America. Conventional laboratory assays, based on microscopy and culture, are not optimal for the diagnosis of either disease. However, antigen (Ag) assays are rapid and highly accurate for the diagnosis of these infections. Methods Laboratory surveillance of PLHIV was carried out in four hospitals in Panama, Honduras and Nicaragua, between 2015 and 2019. Detection of Histoplasma antigens in urine was performed by enzyme immunoassay (EIA), and Cryptococcus antigen detection in sera and cerebrospinal fluid specimens was performed by lateral flow assay (LFA). Results A total of 4,453 PLHIV with clinical suspicion of histoplasmosis ( n = 1,343) or cryptococcosis ( n = 3,110; 2,721 sera and 389 CSF) were tested. Of 1,343 patients suspected of having histoplasmosis, 269 (20%) were Histoplasma Ag positive. Of 3,110 patients tested using the Cryptococcus Ag assay, 329 (11%) were positive. Honduras reported the highest positivity rates (32% for Histoplasma Ag, and 16% for Cryptococcus Ag); Panama reported the largest number of patients testing positive using the Histoplasma Ag assay ( n = 201); and Nicaragua reported the largest number of patients testing positive using the Cryptococcus Ag assay ( n = 170). Conclusion Here, we show how the implementation of rapid diagnostics assays impacted case detection and was useful for the care of people with advanced HIV. Rapid and accurate diagnosis could reduce mortality associated with histoplasmosis and cryptococcosis in PLHIV.

Caceres, Diego H.↗
DOE OSTI2021

Evaluation of external tubular configurations for a high-temperature chloride molten salt solar receiver operating above 700°C

Next-generation concentrating solar power (CSP) tower technologies target operating temperatures exceeding 700°C to increase the thermal-to-electric conversion efficiency. Molten chloride salts are one possible alternative to current commercial molten nitrate salts to enable the higher operating temperature. This paper analyzes the predicted optical, thermal-fluids, and structural performance of traditional external tubular solar receiver configurations applied with a chloride salt heat transfer fluid (HTF) and inlet/outlet temperatures of 500°C/735°C, and considers sensitivity analysis and optimization relative to receiver sizing, tube sizing, number of panels, flow circuit configurations, and solar flux concentration under constraints on internal velocity, pressure drop, wall thickness, and required creep-fatigue lifetime. The high temperature conditions increase the significance of inelastic deformation mechanisms such as creep relative to that expected in commercial 565°C nitrate salt designs. High-temperature creep and creep-fatigue damage in the metal alloy tubes are the key factors that limit allowable solar flux concentration and achievable receiver thermal efficiency at the near-800°C wall temperature conditions. For a traditional external cylindrical receiver configuration, the design parameters and conditions capable of satisfying all constraints produced, at best, a design point receiver efficiency of 78.2%, or 80.5% when excluding receiver intercept efficiency. Variation in the optimal receiver performance relative to uncertainty in the binding maximum velocity, minimum wall thickness, and minimum lifetime constraints is presented.

14 SOLAR ENERGY↗
DOE OSTI2021

Preparing an Incompressible-Flow Fluid Dynamics Code for Exascale-Class Wind Energy Simulations

The U.S. Department of Energy has identified exascale-class wind farm simulation as critical to wind energy scientific discovery. A primary objective of the ExaWind project is to build high-performance, predictive computational fluid dynamics (CFD) tools that satisfy these modeling needs. GPU accelerators will serve as the computational thoroughbreds of next-generation, exascale-class supercomputers. Here, we report on our efforts in preparing the ExaWind unstructured mesh solver, Nalu-Wind, for exascale-class machines. For computing at this scale, a simple port of the incompressible-flow algorithms to GPUs is insufficient. To achieve high performance, one needs novel algorithms that are application aware, memory efficient, and optimized for the latest-generation GPU devices. The result of our efforts are unstructured-mesh simulations of wind turbines that can effectively leverage thousands of GPUs. In particular, we demonstrate a first-of-its-kind, incompressible-flow simulation using Algebraic Multigrid solvers that strong scales to more than 4000 GPUs on the Summit supercomputer.

algebraic multigrid↗
DOE OSTI2021

Preparing an Incompressible-Flow Fluid Dynamics Code for Exascale-Class Wind Energy Simulations: Preprint

The US Department of Energy has identified Exascale-Class wind farm simulation tools as critical to wind energy scientific discovery. A primary objective of the Exawind project is to build high-performance, predictive Computational Fluid Dynamics tools that satisfy these modeling needs. GPU accelerators will serve as the computational thoroughbreds of next generation, Exascale-Class, platforms. Here, we report on our efforts for preparing the Exawind unstructured mesh solver, Nalu-Wind, for Exascale-Class machines. For computing at this scale, a simple port of the incompressible-flow algorithms to GPUs is not sufficient. One needs novel algorithms that are application aware, memory efficient, and optimized for latest generation GPU devices to get high-performance. The result of our efforts are unstructured mesh simulations of wind turbines that use 1/6 the compute resources of Summit supercomputer at Oak Ridge National Lab. In particular, we demonstrate a first-of-its-kind, simulation using Algebraic Multigrid solvers on over 4000 GPUs.

algebraic multigrid↗
DOE OSTI2025

A high-order computational framework for particle-resolved simulations of disperse multiphase flows

This work presents a high-order numerical approach for particle-resolved simulations of disperse multiphase flows, where the Navier-Stokes equations for fluid flow are solved using a high-order spectral element method in the Eulerian framework, and the particle phase is directly simulated with a discrete element method. The coupling between particles and fluids is explicitly handled using an adapted direct-forcing immersed boundary method. Unlike the conventional schemes, a high-order barycentric Lagrange interpolation method and a Gaussian projection kernel are used to ensure accurate momentum exchange between local boundary points and surrounding fluid nodes in the framework of high-order fluid solver. Benchmark tests of increasing complexity are conducted to demonstrate the accuracy and efficiency of our method. Here, it is found that our approach exhibits an excellent convergence performance, as the fluid element/grid is refined and the number of boundary points increases. Compared to conventional low-order methods, the proposed high-order framework enables the use of substantially larger fluid elements while maintaining high accuracy in modeling fluid-particle interactions, owing to the enhanced resolution of high-order basis functions. Moreover, since the primary unknowns are stored at element or grid nodes, the high-order approach offers improved efficiency in both CPU memory usage and total computational cost.

42 ENGINEERING↗
DOE OSTI2022

Effect of Packing Nonuniformity at the Fiber Bundle–Case Interface on Performance of Hollow Fiber Membrane Gas Separation Modules

High-fidelity simulations of momentum and mass transfer within a hollow fiber gas separation membrane module are here reported. The simulations capture the potential detrimental effects of poor fiber packing at the bundle–case interface on fluid distribution and performance. Results are presented for both circular and planar fiber bundles. The length over which bundle–case gaps affects flow is determined. The length increases dramatically with increasing fiber packing fraction. As the packing fraction approaches 0.6, the impact extends over the entire bundle diameter for small modules (<1000 fibers). The results clearly demonstrate the detrimental effect of poor packing along the case and can be used to develop module manufacturing guidelines. To reduce computational costs, an equivalent planar bundle module approximation is developed. The approximate simulations agree well with results from full 3-D simulations and can reduce computational costs without sacrificing fidelity.

42 ENGINEERING↗
DOE OSTI2026

Energy performance augmentation of domestic refrigerators with microchannel condensers

Refrigerators are one of the most extensively used household appliances, accounting for approximately 4% of total household electricity consumption. Enhancing their energy performance can significantly reduce residential energy demand. As a result, this study focuses on reducing the energy consumption of a French-door, bottom-mount refrigerator using isobutane (R600a) as the working fluid. Here, the performance improvement of the refrigerators has been obtained mainly through improving the vapor compression refrigeration cycle, with a particular emphasis on condenser design. This study explores the impact of three-pass serpentine microchannel condenser on energy performance, along with the effects of two distinct fan combinations. Charge optimization experiments were conducted to identify the optimal refrigerant mass for the refrigerator unit with microchannel condenser. Additionally, a comprehensive numerical model was developed to analyze the behavior of vapor compression cycle under various refrigerant charges. The experimental findings revealed that the refrigerator unit with the three-pass microchannel condenser reduces the energy consumption of isobutane-based domestic refrigerators up to 16% while reducing the refrigerant charge by 11% in comparison to the refrigerator unit with conventional wire-and-tube condenser.

Charge optimization↗
DOE OSTI2022

Single-Phase Dielectric Fluid Thermal Management for Power-Dense Automotive Power Electronics

This paper describes the design and performance of a dielectric fluid cooling concept for automotive power electronics. The concept combines a low-thermal-resistance package (which eliminates metalized ceramic substrates) with a high-performance convective cooling strategy (slot jets impinging on finned surfaces). Modeling was first used to design the cooling system to maximize thermal performance and minimize pumping power. Additionally, a prototype was then fabricated, and experiments were conducted to validate the model predictions using three fluids at various fluid flow rates (16.7 cm 3 /s [1 L/min] to 68.3 cm 3 /s [4.1 L/min]) and inlet temperatures (30C and 70C). The final design was compact (120-cm 3 total volume, including heat exchanger and conceptual power modules) and cooled 12 devices (e.g., silicon carbide). The validated model was then used to predict the junction-to-fluid thermal resistance and pumping power for various conditions, including 40C fluid temperature. The results predict thermal resistance values as low as 19 mm 2 K/W are possible using the dielectric fluid cooling approach. The dielectric fluid cooling system is predicted to provide thermal resistance and pumping power values that are approximately 56% and 90% lower, respectively, compared to an automotive power electronics cooling system.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Coupling Thermal-Hydraulics with Reactor Pressure Vessel Fracture Models

Because of the importance of maintaining the integrity of the reactor pressure vessel (RPV) in light-water reactors, significant effort has been devoted over the last several decades to understand the potential failure mechanisms, characterize how material properties evolve due to environmental conditions, and develop tools to assess the probability of fracture in aged RPVs during potential transient events. One important aspect of this problem that has not yet been fully addressed is the effects of nonuniform cooling on the RPV inner wall due to the way low-temperature water injected into the primary coolant system is distributed within the RPV during potential loss-of-coolant accident transients. Colder temperatures are expected in the regions near the inlets, causing a “cold-plume” effect. Rapid cooling of the RPV wall increases the likelihood of fracture initiation, and localized cooling due to cold-plume effects could potentially exacerbate this problem. The Grizzly code can perform a three-dimensional simulation of the RPV thermomechanical response as well as the probabilistic assessment of fracture for a population of pre-existing flaws, which is necessary to account for spatial variations in coolant temperature. This report documents a first effort to couple Grizzly RPV fracture models with computational fluid dynamics models performed using the Cardinal code, which allows for a realistic representation of the temperature distribution. This report demonstrates this coupling approach on two test cases: a simplified proof-of-concept scenario and a realistic small-break loss-of-coolant accident scenario. In both cases, the effects of the spatially varying temperature are evident; although, because the small-break loss-of-coolant accident scenario was far from challenging the RPV’s margins, it is still inconclusive how important cold-plume effects are in realistic accident scenarios. However, this effort represents an important step toward performing realistic analyses to determine to what extent spatially nonuniform cooling might affect RPV integrity under more aggressive accident scenarios.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

PYSIMFRAC: A Python library for synthetic fracture generation and analysis

In this paper, we introduce PYSIMFRAC, an open-source python library for generating 3-D synthetic fracture realizations, integrating with fluid simulators, and performing analysis. PYSIMFRAC allows the user to specify one of three fracture generation techniques (Box, Gaussian, or Spectral) and perform statistical analysis including the autocorrelation, moments, and probability density functions of the fracture surfaces and aperture. This analysis and accessibility of a python library allows the user to create realistic fracture realizations and vary properties of interest. In addition, PYSIMFRAC includes integration examples to two different pore-scale simulators and the discrete fracture network simulator, dfnWorks. The capabilities developed in this work provides opportunity for quick and smooth adoption and implementation by the wider scientific community for accurate characterization of fluid transport in geologic media. We present PYSIMFRAC along with integration examples and discuss the ability to extend PYSIMFRAC from a single complex fracture to complex fracture networks.

58 GEOSCIENCES↗
DOE OSTI2023

Integration of Experimental Hydroprocessing and FCC Data with Process (Aspen Plus) and Refinery Optimization (Aspen PIMS) Models

NREL's Economic, Sustainability, and Market Analysis (ESMA) team develops process models in Aspen Plus to support techno-economic analysis (TEA) and life-cycle assessment (LCA) of conversion pathways from renewable and circular resources to fuels and chemicals. These tools are being applied to assess probable operational constraints or bottlenecks associated with refinery co-processing and repurposing opportunities. The team also utilizes optimizable refinery models to quantify opportunities for biofuel and bioproduct pathways through integration with existing refining infrastructure. The goals of analysis are to model the transition of refineries to renewable and circular feedstocks and quantify the costs production and CO2 abatement through utilization of existing refineries. At the core of the ESMA team's work is the process data derived from conversion experiments on hydroprocessing and fluid catalytic cracking performed at NREL. The objective of this presentation is to highlight new analysis approaches and capabilities in pathway analysis and refinery optimization modeling with specific emphasis on integration of experimental data.

BIOMASS FUELS,ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Modelling of nanometer scale dust grains in tokamak

Dust poses a serious threat to tokamak operation and safety. It is important to study the behaviour of dust grains under tokamak's discharge conditions, which depends heavily on their size and charge. Existing simulations mainly address issues on dust grains with radii larger than 1 μm, in which case, the drift effect due to electromagnetic fields can be safely ignored. For nanometer scale dust grains, however, the drift effect becomes significant and a new model based on guiding-centre system needs to be established. In this work, the NDS has been done under BOUT++ framework. The simulation contains two parts. Part one, NDS evaluates the charging and ablation processes of the dust grains. In the second part, the guiding-centre orbits of dust particles are tracked in tokamak plasmas, whose parameters are obtained from BOUT++, a highly desirable C++ code package for performing parallel plasma fluid simulations with an arbitrary number of equations in 3D curvilinear coordinates. The orbit of nanodust dynamics is described by guiding centre equations for simplicity, and these equations are numerically solved by conventional fourth-order Runge Kutta method. Simulations provide results such as trajectories and evolutions of dust particles with different sizes and velocities for different tokamak geometries. Results show tungsten dust grains with a radius of a few nanometers launched from outer midplane will oscillate before totally ablated in C-Mod. The oscillation in this case is driven by the ion drag force. Larger Nanodust with a radius of 100 nm, on the contrary, cannot be completely constrained by the electromagnetic field. In conclusion, the high plasma temperature and density in the seperatrix region causes severe dust ablation, resulting in total ablation within several ms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Antifouling strategies for protecting bioelectronic devices

Bioelectronic devices are playing an increasingly important role in many areas of our lives. They power a significant portion of medical diagnostics and are becoming more and more important for delivery of therapeutics and monitoring of chronic symptoms. However, surface fouling phenomena, and especially biofouling in complex biological fluids, restricts the performance of these devices and severely reduces their useful lifespan. In this Research Update, we discuss the main principles and strategies that researchers use to prevent fouling and minimize or remove the foulants from bioelectronic device surfaces. We also survey a variety of antifouling approaches that can enhance device performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling of small tungsten dust grains in EAST tokamak with NDS-BOUT ++

In order to investigate the transport of small dusts as well as their evolution property along their trajectories, the NDS module is developed under the BOUT++ framework, a highly desirable C++ code package to perform parallel plasma fluid simulations with an arbitrary number of equations in three-dimensional curvilinear coordinates. Due to the severe dust ablation in fusion plasmas, the dust size would decrease from micrometer to nanometer, resulting in impurities. Small dusts in the simulations here are specified as tungsten spheres with the radii on or below the order of submicrometer. The Rayleigh limit is included in the charging process when the dust is ablated to the droplet phase. The simulation results from the NDS module show that a 200 nm radius spherical tungsten dust originated from upper divertor region of EAST Tokamak is ablated completely due to the intense heating from the incoming plasma inside the core region, well consistent with the CCD footage of EAST shot # 81459. Furthermore it is found that the magnetic field dominates the dust transport when the dust radius is below 100 nm during the ablation along the trajectory. Our simulations predict that a 10 nm radius spherical tungsten dust injected from the inner midplane is well constrained by the magnetic field, and it reaches the inner divertor target with a velocity on the order of km/s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

pySimFrac

pySimFrac is a python library for generating 3D synthetic fracture realizations, integrating with fluid simulators, and performing analysis.

Guiltinan, Eric↗
DOE OSTI2023

Stability and Control of Burning Tokamak Plasmas with Resistive Walls (Final Report)

Work supported by the grant, "Stability and Control of Burning Tokamak Plasmas with Resistive Walls" in the period Aug 2017 to 2023 can be cast in three general categories: (1) linear tearing regimes and the effects on the response to error fields and resistive walls: (2) nonlinear tearing modes in the presence of error fields, with locking; and (3) energetic particle effects. In the first category, we have completed a study of tearing mode regimes with extended MHD effects, including parallel dynamics and toroidal effects, notably favorable average curvature. This work has been presented at the 2018 Sherwood Conference. This work has been published in the ArXiv and is being prepared for publication in Physics of Plasmas. A systematic study of shaping in a tokamak plasma with resistive tearing layers and a resistive wall has been presented in the PhD dissertation by Dov Rhodes, a student of Andrew Cole at Columbia University. John Finn was on Rhodes's PhD committee, and was a co-author of a paper published in Physics of Plasmas on that work. A detailed study of nonlinear tearing modes in the presence of finite beta, favorable average curvature, and an error field has been nearly completed. In this study it was found that the response to an error field with real frequency a tearing layer agreed with analytic results, and that tearing mode saturation by flattening of the current profile as well as destabilization due to flattening of the pressure profile were important factors in the locking process. This work was presented at the 2017 APS/DPP Conference and at the 2018 Sherwood Conference. The effects of energetic ions on tearing modes was presented at the 2017 APS/DPP Conference and in the PhD dissertation of Michael Halfmoon. John Finn served as a committee member on Halfmoon's PhD committee. Extensions to this work including two fluid effects were performed and presented at the APS/DPP Conference in 2017.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Contribution to: UNM-UNR-VT Project Research Performance Progress Report 'Seeding and Evolution of Magnetohydrodynamic Instabilities of a Metal Surface Driven by Intense Current' Year 4 (no-cost extension for FY 2022): Oct 2021 - Sept 2022

The multiphysics code Ares has been used to perform resistive MHD fluid simulations of the METI-II experiments (described in Section 1.1.2). The simulations include both 1D Lagrangian simulations and axisymmetric 2D ALE simulations. The results of these simulations are summarized here and a full manuscript is nearing completion for submission.

36 MATERIALS SCIENCE↗