Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance Trace”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Impacts of cloud superparameterization on projected daily rainfall intensity climate changes in multiple versions of the Community Earth System Model

Abstract Changes in the character of rainfall are assessed using a holistic set of statistics based on rainfall frequency and amount distributions in climate change experiments with three conventional and superparameterized versions of the Community Atmosphere Model (CAM and SPCAM). Previous work has shown that high‐order statistics of present‐day rainfall intensity are significantly improved with superparameterization, especially in regions of tropical convection. Globally, the two modeling approaches project a similar future increase in mean rainfall, especially across the Inter‐Tropical Convergence Zone (ITCZ) and at high latitudes, but over land, SPCAM predicts a smaller mean change than CAM. Changes in high‐order statistics are similar at high latitudes in the two models but diverge at lower latitudes. In the tropics, SPCAM projects a large intensification of moderate and extreme rain rates in regions of organized convection associated with the Madden Julian Oscillation, ITCZ, monsoons, and tropical waves. In contrast, this signal is missing in all versions of CAM, which are found to be prone to predicting increases in the amount but not intensity of moderate rates. Predictions from SPCAM exhibit a scale‐insensitive behavior with little dependence on horizontal resolution for extreme rates, while lower resolution (∼2°) versions of CAM are not able to capture the response simulated with higher resolution (∼1°). Moderate rain rates analyzed by the “amount mode” and “amount median” are found to be especially telling as a diagnostic for evaluating climate model performance and tracing future changes in rainfall statistics to tropical wave modes in SPCAM.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Elucidating the Formation Mechanisms of Silver Nanoparticles from a Comprehensive Simulation Based on First-Principles Calculations

The nucleation and growth of silver nanoparticles are modeled and simulated based on first-principles calculations. The formation energy of single-crystal and multiply twinned particles is calculated to elucidate the thermodynamic properties of particles and modeled as a function of geometric parameters. On the basis of the calculated formation energy and the molecular collision theory, Kinetic Monte Carlo simulations are performed to trace the formation process of silver nanoparticles. In particular, the temporal change of size distribution and morphology are obtained and used to elucidate the governing mechanism in each stage of the formation process. It is demonstrated that the formation process is separated into four phases depending on the power-law time dependence of the particle formation and they are characterized by the size difference between coalescent particles. The temperature dependence of size distribution and morphology is also studied to elucidate the underlying mechanisms. The findings are compared with classical theories quantitatively and a strategy to control the morphology of silver nanoparticles is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pivotal role of organic adsorbates for the creation of catalytic sites during dry reforming of methane

Inadvertent factors can sometimes be crucial for synthesis of catalysts. The use of polyalcohols is common in the synthesis of heterogeneous catalysts. Interactions between alcohols and heterogeneous catalysts have been shown to induce surface reconstructions that greatly impact catalytic performance. Thus, traces of these alcohol functionalities on the as-synthesized catalysts, combined with heat treatment, could be critical in the generation of catalytic sites. Here, we show that during the synthesis of a Ni–Mo/MgO catalyst using a polyol process, residual ethylene glycol (EG) on the surface plays a significant role in the generation of catalytic sites for dry reforming of methane (DRM). The as-synthesized catalyst presents dispersed cationic Ni. Under DRM reaction conditions, the presence of EG, and H2 generated in situ, promote the generation of co-localized Ni–Mo nanoparticles (NPs). Greater amount of EG in the as-synthesized catalyst prevented sintering, leading to better catalyst stability and higher rates. If the residual EG remaining post-synthesis is removed through calcination, before conducting DRM, NiO NPs are formed and the material is completely inactive for catalyzing the reaction. When using a different support, denoted MgO*, EG also proved indispensable to generate active sites, although Ni–Mo co-localization was not evident, and a combination of DRM-related species was needed to activate the catalyst, not just H2. This work systematically uncovers how the interactions between organic adsorbates, the supported metals and the catalyst support dictate the creation of catalytic active sites.

Polo Garzon, Felipe [ORNL] (ORCID:0000000265076183↗

Binary nucleation rates for ethanol/water mixtures in supersonic Laval nozzles: Analyses by the first and second nucleation theorems

We performed pressure trace measurements and small angle x-ray scattering measurements to determine the vapor-liquid nucleation rates of EtOH/H{sub 2}O mixtures including pure EtOH and pure H{sub 2}O in two supersonic Laval nozzles with different expansion rates. The nucleation rates varied from 0.9 × 10{sup 17} to 16 × 10{sup 17} cm{sup −3} s{sup −1} over the temperature range of 210 K to 230 K, EtOH activity range of 0 to 11.6, and H{sub 2}O activity range of 0 to 124. The first and second nucleation theorems were applied to the nucleation rates to estimate the sizes, compositions, and excess energies of the critical clusters. The critical clusters contained from 4 to 15 molecules for pure H{sub 2}O and EtOH/H{sub 2}O clusters, and from 16 to 23 molecules for pure EtOH clusters. Comparing the excess energies of the pure H{sub 2}O critical clusters with the results of a quantum-chemistry calculation suggested that the pre-factor of the theoretical nucleation rate is almost constant regardless of the monomer concentration. One possible explanation for this result is that cooling of the critical clusters limits the nucleation rate under the highly supersaturated conditions. The results of the analyses also yielded the relation between the surface energy and the composition of the critical clusters, where the latter are predicted to consist only of surface molecules. Applying this relationship to the EtOH/H{sub 2}O bulk liquid mixtures, we estimated the EtOH mole fraction in the surface layer and found it is higher than that derived from the surface tension based on the Gibbs adsorption equation when the EtOH mole fraction in the liquid is higher than about 0.2 mol/mol. This discrepancy was attributed to the existence of the EtOH depletion layer just below the surface layer of the liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ICP MS selection of radiopure materials for the GERDA experiment

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the {sup 76}Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10{sup −3} counts/keV kg y) at the Q{sub ββ}. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designed and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the oxidation effects on isothermal solidification based high temperature stable Pt/In/Au and Pt/In/Ag thick film interconnections on LTCC substrate

The objective of the presented paper is to determine the oxidized phase compositions of indium lead-free solders during solidification at 190 ° C under room environment with the help of X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDX). Many lead-free solders alloys available oxidizes and have poor wetting properties. The oxidation of pure indium solder foil, Au, Pt, and Ag alloys were identified and investigated, in the process of isothermal solidification based solder joints construction at room environment and humidity. Both EDX and XRD characterization techniques were performed to trace out the amount of oxide levels and variety of oxide formations at solder interface respectively. The paper also aims to report the isothermal solidification technique to provide interconnections to pads on Low temperature co-fired ceramic (LTCC) substrate. It also elaborates advantages of isothermal solidification over the other methods of interconnection. Scanning electron microscope (SEM) used to identify the oxidized spots on the surface of Pt, Ag substrates and In solder. The identified oxides were reported.

36 MATERIALS SCIENCE↗

RADIATIVE COOLING IMPLEMENTATIONS IN SIMULATIONS OF PRIMORDIAL STAR FORMATION

We study the thermal evolution of primordial star-forming gas clouds using three-dimensional cosmological simulations. We critically examine how assumptions and approximations made in calculating radiative cooling rates affect the dynamics of the collapsing gas clouds. We consider two important molecular hydrogen cooling processes that operate in a dense primordial gas: H{sub 2} line cooling and continuum cooling by H{sub 2} collision-induced emission. To calculate the optically thick cooling rates, we follow the Sobolev method for the former, whereas we perform ray tracing for the latter. We also run the same set of simulations using simplified fitting functions for the net cooling rates. We compare the simulation results in detail. We show that the time- and direction-dependence of hydrodynamic quantities such as gas temperature and local velocity gradients significantly affects the optically thick cooling rates. Gravitational collapse of the cloud core is accelerated when the cooling rates are calculated by using the fitting functions. The structure and evolution of the central pre-stellar disk are also affected. We conclude that physically motivated implementations of radiative transfer are necessary to follow accurately the thermal and chemical evolution of a primordial gas to high densities.

79 ASTRONOMY AND ASTROPHYSICS↗

Associative nitrogen fixation linked with three perennial bioenergy grasses in field and greenhouse experiments

Abstract Associative nitrogen (N 2 )‐fixation (ANF) by bacteria in the root‐zone of perennial bioenergy grasses has the potential to replace or supplement N fertilizer and support sustainable production of biomass, but its application in marginal ecosystems requires further evaluation. In this study, we first combined both greenhouse and field experiments, to explore the N 2 fixation effects of three temperate feedstocks Miscanthus × giganteus (giant miscanthus, Freedom), Panicum virgatum (switchgrass, Alamo), and Saccharum sp. (energycane, Ho 02‐147). In field studies across three growing seasons, plant and soil pools of candidate feedstocks were partially composed of N derived from the atmosphere (Ndfa). Energycane, giant miscanthus, and switchgrass were estimated to derive >30%, %Ndfa. Greenhouse studies were also performed to trace isotopically labeled 15 N 2 into plant biomass and soil pools. Evidence for Ndfa was detected in all three feedstock grasses (using reference 15 N of soil, chicory, and sorghum, δ 15 N~+7.0). Isotopically labeled 15 N 2 was traced into biomass (during grass elongation stage) and soil pools. Extrapolation of rates during the 24 hr labeling period to 50 days estimated 30%–55% of plant Ndfa, with the greatest Ndfa for energycane. The findings of the field natural abundance and greenhouse 15 N 2 feeding experiments provided complementary evidence that perennial bioenergy grasses have the potential to support relatively high rates of ANF, and accumulate diazotroph‐derived N into biomass when grown on non‐fertilized soil.

09 BIOMASS FUELS↗

Modeling Large-Scale Slim Fly Networks Using Parallel Discrete-Event Simulation

As supercomputers approach exascale performance, the increased number of processors translates to an increased demand on the underlying network interconnect. We present that the slim fly network topology, a new low-diameter, low-latency, and low-cost interconnection network, is gaining interest as one possible solution for next-generation supercomputing interconnect systems. In this article, we present a high-fidelity slim fly packet-level model leveraging the Rensselaer Optimistic Simulation System (ROSS) and Co-Design of Exascale Storage (CODES) frameworks. We validate the model with published work before scaling the network size up to an unprecedented 1 million compute nodes and confirming that the slim fly observes peak network throughput at extreme scale. In addition to synthetic workloads, we evaluate large-scale slim fly models with real communication workloads from applications in the Design Forward program with over 110,000 MPI processes. We show strong scaling of the slim fly model on an Intel cluster achieving a peak network packet transfer rate of 2.3 million packets per second and processing over 7 billion discrete events using 128 MPI tasks. Enabled by the strong performance capabilities of the model, we perform a detailed application trace and routing protocol performance study. Lastly, through analysis of metrics such as packet latency, hop count, and congestion, we find that the slim fly network is able to leverage simple minimal routing and achieve the same performance as more complex adaptive routing for tested DOE benchmark applications.

97 MATHEMATICS AND COMPUTING↗

Kip, Version 1.0

This high-performance ray tracing library provides very fast rendering, compact code, type flexibility via C++ 'generic programming' techniques, and ease of use through an application programming interface (API) that functions independently of any GUI, on-screen display, or other enclosing application. Kip supports constructive solid geometry models based on any of several built-in shapes and operators and allows for new, user-defined shapes and operators. Additional features include basic texturing, input/output of models using a simple human-readable file format with full error checking and detailed diagnostics, and support for shared data parallelism. Kip is written in pure, ANSI Standard C++, is entirely platform independent, and is very easy to use, as it requires no build system, configuration or installation scripts, wizards, special preprocessing, makefiles, or external libraries.

Staley, Martin↗

NB6 HBRR Science Design

This report describes the calculations and the Monte Carlo Ray Tracing simulations performed using the McStas package to determine the coatings and geometry for the NB-6 guide. It provides the information to inform the mechanical design, validation tests and verification that it meets the science requirements.

42 ENGINEERING↗

Modeling and Simulation of Fuel Dispersal During the Loss-of-Coolant Accident

This document is the compilation of the milestone portion to a larger end of project NEUP report. The executive summary of the modeling portion is provided below: In the event of cladding rupture during a postulated LOCA in a pressurized water reactor, fuel particles, along with fission gases, can be expelled into the reactor core from the fractured fuel rod, a phenomenon referred to as fuel dispersal. The initial stage of fuel dispersal is strongly influenced by the high-pressure ejection of fuel fragments, the size and geometry of the ruptured cladding, and the depressurization history of the fuel rod during the postulated LOCA transient. Depending on the location of the burst orifice relative to the quench front, the dispersal event represents an intricate three-phase flow and heat transfer phenomenon, where high-temperature fuel particles carried by the fission gases interact with the coolant within the narrow subchannels of the fuel assemblies, inducing localized phase change. Given the unique multiphysics nature of this phenomena, the current study develops a dedicated computational framework to predict the mass distribution and cooling of dispersing fuel particles, facilitating post-accident assessment and management of the fuel assemblies. Considering the scale of nuclear reactor applications, a continuum three-fluid model is proposed for simulating the transport of solids within the reactor core. With high-temperature fuel fragments within the liquid media, nucleation sites inducing phase changes are dispersed within the flow domain. Coupled with the fact that the transient dispersal event occurs on different time scales than other three-phase flow applications, this study derives a time-averaged three-fluid flow model without losing generality. The assumptions regarding the continuum treatment of the solid phase and the modeling of fuel dispersal behavior are incorporated to simplify the governing equations and derive applicable closure relations. The computational validation of the model was conducted using adiabatic experimental results obtained from ongoing research at Oregon State University, focusing on characterizing fuel dispersal behavior during simulated LOCA conditions. Settlement characteristics of the solids, quantified by the probability distribution of equivalent particles, closely matched the probability density functions reported in experimental studies. The transport of fuel particles within a scaled 5 × 5 lattice of a pressurized-water reactor rod bundle geometry was modeled through a two-fluid Eulerian framework. The required boundary conditions were evaluated from the fuel performance code BISON in a postulated large-break LOCA scenario. The modeling framework considered solid fuel particles as granular matter, interacting with the gaseous dry steam phase and fission gases through the governing interfacial momentum exchange between the participating fluids. The simulation results provided the volume fraction of the solids obtained at the bottom surface of the enclosing tank geometry. Postulated LOCA leading to fuel dispersal phenomena involves the strong coupling between fuel thermomechanics, cladding deformation, thermal-hydraulics, and fuel particle transport. Incorporation of such a strong coupling in numerical simulation is performed by coupling the multiphysics solvers. In the case of fuel dispersal, a strong coupled simulation can be performed by coupling the BISON code for fuel performance, the TRACE code for system-level thermal hydraulics, and fuel particle transport in Multiphysics Object-Oriented Simulation Environment (MOOSE). For such intricate infrastructure, the MOOSE Framework eases the data transfer between codes. The recent version of MOOSE has incorporated the Navier-Stokes module for the fluid flow. An exploratory exercise was done to gain familiarity with finite volume capabilities in the MOOSE framework to incorporate the Spalart-Allmaras (SA) turbulence model. New finite-volume and auxiliary kernels were introduced to assemble the SA transport equation, compute turbulent viscosity, and evaluate wall distance and diagnostic turbulence terms, fully integrated with existing Navier-Stokes modules. A turbulent lid-driven cavity at a Reynolds number of approximately 10,000 is used for verification. MOOSE shows the robust solver convergence and produces the turbulent features. But it underpredicts the velocity profile and turbulent quantities, emphasizing the need to develop improved SA near-wall treatments (e.g., low-Re corrections or wall functions) as a key direction for future work.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Contribution of Road Grade to the Energy Use of Modern Automobiles Across Large Datasets of Real-World Drive Cycles: Preprint

Understanding the real-world power demand of modern automobiles is of critical importance to engineers using modeling and simulation to inform the intelligent design of increasingly efficient powertrains. Increased use of global positioning system (GPS) devices has made large scale data collection of vehicle speed (and associated power demand) a reality. While the availability of real-world GPS data has improved the industry's understanding of in-use vehicle power demand, relatively little attention has been paid to the incremental power requirements imposed by road grade. This analysis quantifies the incremental efficiency impacts of real-world road grade by appending high fidelity elevation profiles to GPS speed traces and performing a large simulation study. Employing a large real-world dataset from the National Renewable Energy Laboratory's Transportation Secure Data Center, vehicle powertrain simulations are performed with and without road grade under five vehicle models. Aggregate results of this study suggest that road grade could be responsible for 1% to 3% of fuel use in light-duty automobiles.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Computer simulation of engine systems

The paper discusses the availability throughout the government and industry of analytical methods for calculating both the steady state and transient performance of an aircraft engine during an entire flight regime. The historical development of some of the analytical tools capable of evaluating installation effects on engine performance is traced and their present status is described.

Fishbach, L. H.↗

Radio frequency performance of DSS 14 64-meter antenna at X-band using an improved subreflector

The performance of the Deep Space Station (DSS) 14 64-meter antenna X-band gain determined using the X- and K-band Radar feedcone is discussed. Tests prior to, and following the installation of an improved subreflector, proved the unit largely (if not totally) restored initial performance levels at that station. The X-band peak gain with the subreflector is +17.8dBi(area efficiency of 47.3 percent); an increase of +0.47 dB due to the unit installation. The test further showed a significant shift in the axial focus required (function of elevation angle) which, if not implemented operationally, will cause a serious degradation. An historical summary of all documented X-band gain measurements at DSS 14 is included and reviewed. The initial performance is traced through various major configuration changes such as the installation of the X-band dual hybrid mode horn within the operational XRO feedcone. Finally, based on the summary and recent data, a peak X-band antenna gain of +72.1 dBi (area efficiency of 50.8 percent) is projected for the operational feedcone.

Freiley, A. J.↗

SPP: A data base processor data communications protocol

The design and implementation of a data communications protocol for the Intel Data Base Processor (DBP) is defined. The protocol is termed SPP (Service Port Protocol) since it enables data transfer between the host computer and the DBP service port. The protocol implementation is extensible in that it is explicitly layered and the protocol functionality is hierarchically organized. Extensive trace and performance capabilities have been supplied with the protocol software to permit optional efficient monitoring of the data transfer between the host and the Intel data base processor. Machine independence was considered to be an important attribute during the design and implementation of SPP. The protocol source is fully commented and is included in Appendix A of this report.

Fishwick, P. A.↗