Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A consistent and conservative Phase-Field method for multiphase incompressible flows

In the present study, a consistent and conservative Phase-Field method, including both the model and scheme, is developed for multiphase flows with an arbitrary number of immiscible and incompressible fluid phases. The consistency of mass conservation and the consistency of mass and momentum transport are implemented to address the issue of physically coupling the Phase-Field equation, which locates different phases, to the hydrodynamics. These two consistency conditions, as illustrated, provide the “optimal” coupling because (i) the new momentum equation resulting from them is Galilean invariant and implies the kinetic energy conservation, regardless of the details of the Phase-Field equation, and (ii) failures of satisfying the second law of thermodynamics or the consistency of reduction of the multiphase flow model only result from the same failures of the Phase-Field equation but are not due to the new momentum equation. Physical interpretation of the consistency conditions and their formulations are first provided, and general formulations that are obtained from the consistency conditions and independent of the interpretation of the velocity are summarized. Then, the present consistent and conservative multiphase flow model is completed by selecting a reduction consistent Phase-Field equation. Several novel techniques are developed to inherit the physical properties of the multiphase flows after discretization, including the gradient-based phase selection procedure, the momentum conservative method for the surface force, and the general theorems to preserve the consistency conditions on the discrete level. Equipped with those novel techniques, a consistent and conservative scheme for the present multiphase flow model is developed and analyzed. The scheme satisfies the consistency conditions, conserves the mass and momentum, and assures the summation of the volume fractions to be unity, on the fully discrete level and for an arbitrary number of phases. All those properties are numerically validated. Finally, numerical applications demonstrate that the present model and scheme are robust and effective in studying complicated multiphase dynamics, especially for those with large-density ratios.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

An implementation of the phase-field model based on coupled thermomechanical finite element solvers for large-strain twinning, explicit dynamic fracture and the classical Stefan problem

The implementation of a phase-field model in finite elements usually requires significant expertise and involves the development of a user element with additional degrees of freedom. An alternative implementation of the phase-field model within a thermo-mechanical finite element simulation package was presented in (Cho et al 2012 Int. J. Solids Struct. 49 1973–1992), where the phase-field variable is treated as the temperature degree of freedom. However, this approach has only been used for small strain phase-field modelling of martensitic transformations and quasistatic phase-field modelling of fracture. Here, we present a phase-field finite element implementation via the temperature degree of freedom for several additional cases from the literature: (i) the large-strain phase-field description of deformation twinning presented in (Clayton and Knap 2011 Physica D 240 841–858), (ii) phase-field description of brittle fracture with inertial effects based on the theory from (Molnár and Gravouil 2017, Finite Elem. Anal. Des. 130 27–38) and (Miehe et al 2010 Int. J. Numer. Methods Eng. 83 1273–1311) and (iii) the classical Stefan problem of solidification presented in (Mackenzie and Robertson 2002 J. Comput. Phys. 181 526–544). The last problem involves the temperature and phase-field variables as unknowns.

36 MATERIALS SCIENCE↗
DOE OSTI2020

FFT-based solver for higher-order and multi-phase-field fracture models applied to strongly anisotropic brittle materials

This paper presents the application of a fast Fourier transform (FFT) based method to solve two phase field models designed to simulate crack growth of strongly anisotropic materials in the brittle regime. By leveraging the ability of the FFT-based solver to generate solutions with higher-order and global continuities, we design two simple algorithms to capture the complex fracture patterns (e.g. sawtooth, and curved crack growth) common in materials with strongly anisotropic surface energy via the multi-phase-field and high-order phase-field frameworks. A staggered operator-split solver is used where both the balance of linear momentum and the phase field governing equations are formulated in the periodic domain. The unit phase field of the initial failure region is prescribed by the penalty method to alleviate the sharp material contrast between the initial failure region and the base material. The discrete frequency vectors are generalized to estimate the second and fourth order gradients such that the Gibbs effect near shape interfaces or jump conditions can be suppressed. Furthermore, a preconditioner is adopted to improve the convergence rate of the iterative linear solver. Three numerical experiments are used to systematically compare the performance of the FFT-based method in the multi-phase-field and high-order phase-field frameworks.

42 ENGINEERING↗
DOE OSTI2024

A brief review on strain engineering of ferroelectric K x Na 1- x NbO 3 epitaxial thin films: Insights from phase-field simulations

Strains play a pivotal role in determining the phase equilibrium, domain configuration, and functional properties of the low-dimensional ferroelectrics. There is growing interest in the strain engineering of ferroelectric K x Na 1- x NbO 3 (KNN) epitaxial thin films, which exhibit excellent physical properties and promise as eco-friendly alternatives to lead-based ferroelectrics for microdevice applications. Further, advances have been made in understanding the phase equilibria and transitions, domains and domain walls, and their relations to the physical properties of KNN epitaxial thin films using a combination of experiments and theoretical modeling, particularly phase-field simulations. Here, we review recent progress in these aspects and showcase the phase-field method for establishing strain phase diagrams, elucidating the domain and domain wall structures at equilibrium, and predicting the structure–property relationships in ferroelectric KNN thin films. We also discuss challenges and opportunities to further advance our understanding of KNN thin films and potentially unlock new functionalities by leveraging phase-field simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Crack opening calculation in phase-field modeling of fluid-filled fracture: A robust and efficient strain-based method

The phase-field method has become popular for the numerical modeling of fluid-filled fractures, thanks to its ability to represent complex fracture geometry without algorithms. However, the algorithm-free representation of fracture geometry poses a significant challenge in calculating the crack opening (aperture) of phase-field fracture, which governs the fracture permeability and hence the overall hydromechanical behavior. Although several approaches have been devised to compute the crack opening of phase-field fracture, they require a sophisticated algorithm for post-processing the phase-field values or an additional parameter sensitive to the element size and alignment. Here, we develop a novel method for calculating the crack opening of fluid-filled phase-field fracture, which enables one to obtain the crack opening without additional algorithms or parameters. Here we transform the displacement-jump-based kinematics of a fracture into a continuous strain-based version, insert it into a force balance equation on the fracture, and apply the phase-field approximation. Through this procedure, we obtain a simple equation for the crack opening which can be calculated with quantities at individual material points. We verify the proposed method with analytical and numerical solutions obtained based on discrete representations of fractures, demonstrating its capability to calculate the crack opening regardless of the element size or alignment.

58 GEOSCIENCES↗
DOE OSTI2019

Phase field simulation of grain size effects on the phase coexistence and magnetostrictive behavior near the ferromagnetic morphotropic phase boundary

The grain size effects on the phase coexistence and magnetostrictive response of Tb 1-x Dy x Fe 2 polycrystals near the ferromagnetic morphotropic phase boundary (MPB) are revealed through phase-field modeling. It shows that phase coexistence is a universal phenomenon in polycrystals for both ferromagnetic and ferroelectric MPB and that the range of compositions for phase coexistence increases with decreasing grain sizes. A large, reversible, and anhysteretic magnetostrictive response at low external fields is also found in the fine-grained polycrystals around the ferromagnetic MPB, which offers us a route to developing nanocrystalline magnetostrictive materials.

42 ENGINEERING↗
DOE OSTI2022

A thermodynamically consistent finite strain phase field approach to ductile fracture considering multi-axial stress states

Phase field models for ductile fracture have gained significant attention in the last two decades due to their ability in implicitly tracking the nucleation and propagation of cracks. However, most crack phase field formulations for elastoplastic solids focus only on the effects of plastic deformation, and do not consider the different multi-axial stress states that may arise in practical designs. In this work, a thermodynamically consistent phase field approach coupled with finite strain plasticity, considering multi-axial stress states is presented. In order to account for the coupling between plasticity and stress states, the Stress-Weighted Ductile Fracture Model (SWDFM) is utilized. The SWDFM represents a criterion for predicting ductile crack initiation under both monotonic and cyclic loadings based on histories of an internal plastic variable, stress triaxiality, and the Lode angle parameter. The excellent performance of the SWDFM for predicting ductile crack initiation motivates for its incorporation into a phase field approach for predicting both crack initiation and propagation through degradation of the fracture toughness. Moreover, based on the second law of thermodynamics, exact requirements are imposed on the rate at which the fracture toughness can evolve. Here, a novel function for degrading the plastic yield surface during the evolution of damage is introduced. This function, in line with experimental observations, leads to an accumulation of plastic deformation in damaged regions of a solid, and avoids numerical instabilities arising from concentrations of large plastic deformations in severely damaged regions. For validating the proposed model, results of computational simulations are compared to data from selected tests considering different multi-axial stress states. Comparisons of the numerical results with data from laboratory experiments demonstrate the capabilities of the proposed framework.

42 ENGINEERING↗
DOE OSTI2024

Parameterization of vacancy production rate in phase-field models of fission gas bubble evolution in nuclear fuel

Phase-field modeling has increasingly been used to study microstructural evolution in fission gas bubbles in nuclear fuel to improve understanding of fission gas release. To improve computational efficiency, often only vacancies and gas atoms are included as defect species. In this case, the net effects of vacancy and interstitial production, recombination, and biased sink absorption are included as a net vacancy source, or net vacancy source combined with an effective sink. However, there has been a lack of clarity on what parameter values should be used for these approaches to best match the more complete physical picture that includes interstitials and vacancies. Here, we compare a phase-field model of void growth to analytical models for the source-only and source plus sink approach to gain insight into how the phase-field models can be parameterized effectively. The source-only approach provides greater flexibility to match growth rates determined from the full vacancy-interstitial picture. A strategy was developed for determining the value of the net vacancy source term by comparing to an analytical model that includes vacancy and interstitial production, recombination, and biased sink absorption. Finally, this strategy can be used to parameterize phase-field models of fission gas bubble growth.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

MARMOT Phase-Field Model for the U-Si System

A phase-field model for the U-Si system has been implemented in MARMOT. The free energies for the phases relevant to accident-tolerant fuel applications (U 3 Si 2 , USi, U 3 Si, and liquid) were implemented as free energy materials within MARMOT. A new three-phase phase-field model based on the concepts of the Kim-Kim-Suzuki two-phase model was developed and implemented in the MOOSE phase-field module. Key features of this model are that two-phase interfaces are stable with respect to formation of the third phase, and that arbitrary phase free energies can be used. The model was validated using a simplified three-phase system and the U-Si system. In the U-Si system, the model correctly reproduced three-phase coexistence in a U 3 Si 2 -liquid-USi system at the eutectic temperature, solidification of a three-phase mixture below the eutectic temperature, and complete melting of a three-phase mixture above the eutectic temperature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Thermo4PFM: Facilitating Phase-field simulations of alloys with thermodynamic driving forces

Phase-field modeling is a popular front-tracking approach used to model solidification. Its time-evolution equations are often coupled to alloy composition and/or thermal diffusion in high-resolution multiphysics approaches. Materials thermodynamic properties tabulated in CALPHAD databases can be used for phase-field modeling to parameterize bulk energies of alloys. In addition, they can be naturally integrated into models such as the Kim-Kim-Suzuki (KKS) model where driving forces depend on the differences between chemical potentials of co-existing phases. In that case, a small system of coupled nonlinear equations needs to be solved at every point in space where the phase-field order parameter is to be updated and evolved in time. Here we present Thermo4PFM, a solver for the KKS equations for binary and ternary alloys, with two or three phases, and parameterized with CALPHAD models. Thermo4PFM is open source, written in C++, and can take advantage of Graphics Processing Units (GPU) accelerators. Using OpenMP offload capabilities for C++ classes, an excellent performance is demonstrated on GPU using the LLVM compiler. CALPHAD data is read from simple JSON files using an open source parser from the boost library.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Effects of confinements on morphology of In{sub x}Ga{sub 1–x}As thin film grown on sub-micron patterned GaAs substrate: Elastoplastic phase field model

An elastoplastic phase field model is developed to investigate the role of lateral confinement on morphology of thin films grown heteroepitaxially on patterned substrates. Parameters of the model are chosen to represent In{sub x}Ga{sub 1-x}As thin films growing on GaAs patterned with SiO₂. We determined the effect of misfit strain on morphology of thin films grown in 0.5 μm patterns with non-uniform deposition flux. Growth of islands inside patterns can be controlled by non-uniformity of deposition flux, misfit strain between film and the substrate, and also strain energy relaxation due to plastic deformation. Our results show that the evolution of island morphology depends non-monotonically on indium content and associated misfit strain due to coupling between the plastic relaxation and the confinements effects. Low indium concentration (0%–40%) causes formation of instabilities with relatively long wavelengths across the width of the pattern. Low surface diffusion (due to low indium concentration) and fewer islands across the pattern (due to small misfit strain) lead to formation and growth of islands near the walls driven by overflow flux. Further increase in indium concentration (40%–75%) increases the lattice mismatch and surface diffusivity of the film, and also activates plastic deformation mechanism, which leads to coalescence of islands usually away from the edges. By further increasing the indium concentration (up to 100%), plastic deformation relaxes most of the strain energy density of the film, which prevents formation of instabilities in the film. Hence, in this case, islands are only formed near the walls.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Report on the Implementation of Homogeneous Nucleation Scheme in MARMOT-based Phase Field Simulation

In this report, we summarized our effort in developing mesoscale phase field models for predicting precipitation kinetics in alloys during thermal aging and/or under irradiation in nuclear reactors. The first part focused on developing a method to predict the thermodynamic properties of critical nuclei such as the sizes and concentration profiles of critical nuclei, and nucleation barrier. These properties are crucial for quantitative simulations of precipitate evolution kinetics with phase field models. Fe-Cr alloy was chosen as a model alloy because it has valid thermodynamic and kinetic data as well as it is an important structural material in nuclear reactors. A constrained shrinking dimer dynamics (CSDD) method was developed to search for the energy minimum path during nucleation. With the method we are able to predict the concentration profiles of the critical nuclei of Cr-rich precipitates and nucleation energy barriers. Simulations showed that Cr concentration distribution in the critical nucleus strongly depends on the overall Cr concentration as well as temperature. The Cr concentration inside the critical nucleus is much smaller than the equilibrium concentration calculated by the equilibrium phase diagram. This implies that a non-classical nucleation theory should be used to deal with the nucleation of Cr precipitates in Fe-Cr alloys. The growth kinetics of both classical and non-classical nuclei was investigated by the phase field approach. A number of interesting phenomena were observed from the simulations: 1) a critical classical nucleus first shrinks toward its non-classical nucleus and then grows; 2) a non-classical nucleus has much slower growth kinetics at its earlier growth stage compared to the diffusion-controlled growth kinetics. 3) a critical classical nucleus grows faster at the earlier growth stage than the non-classical nucleus. All of these results demonstrated that it is critical to introduce the correct critical nuclei into phase field modeling in order to correctly capture the kinetics of precipitation. In most alloys the matrix phase and precipitate phase have different concentrations as well as different crystal structures. For example, Cu precipitates in FeCu alloys have fcc crystal structure while the matrix Fe-Cu solid solution has bcc structure at low temperature. The WBM model and KimS model, where both concentrations and order parameters are chosen to describe the microstructures, are commonly used to model precipitations in such alloys. The WBM and KimS models have not been implemented into Marmot yet. In the second part of this report, we focused on implementing the WBM and KimS models into Marmot. The Fe-Cu alloys, which are important structure materials in nuclear reactors, was taken as the model alloys to test the models.

Fe Alloys↗
DOE OSTI2020

The effects of introducing elasticity using different interpolation schemes to the grand potential phase field model

Introducing elastic energy in the phase field method has been shown to influence interfacial energy, depending on the elastic interpolation scheme. This study investigates the impact of the elastic energy when using a grand potential-based phase field method, comparing the result of Khachaturyan’s strain interpolation scheme (KHS) and Voight-Taylor’s elastic energy interpolation scheme (VTS). The KHS model leads to a decrease in the interfacial energy, while the VTS model leads to an increase. The change in interfacial energy is greater with the VTS model than the KHS model, which suggests that the KHS model is more appropriate to limit the artificial impact of the elastic energy on the interfacial energy. When the contribution at the interface is not negligible, it is shown that both the microstructure evolution kinetics and the equilibrium microstructure can be influenced by the choice of the elastic scheme being used. In addition, this paper shows that the grand potential model might not be appropriate when the system requires the introduction of a composition-dependent term in the elastic energy contribution. This limitation is due to the need for an explicit and invertible relation between the total potential and the composition.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Black and gray box learning of amplitude equations: Application to phase field systems

Here, we present a data-driven approach to learning surrogate models for amplitude equations and illustrate its application to interfacial dynamics of phase field systems. In particular, we demonstrate learning effective partial differential equations describing the evolution of phase field interfaces from full phase field data. We illustrate this on a model phase field system, where analytical approximate equations for the dynamics of the phase field interface (a higher-order eikonal equation and its approximation, the Kardar-Parisi-Zhang equation) are known. For this system, we discuss data-driven approaches for the identification of equations that accurately describe the front interface dynamics. When the analytical approximate models mentioned above become inaccurate, as we move beyond the region of validity of the underlying assumptions, the data-driven equations outperform them. In these regimes, going beyond black box identification, we explore different approaches to learning data-driven corrections to the analytically approximate models, leading to effective gray box partial differential equations.

42 ENGINEERING↗
DOE OSTI2021

Evolution of microstructures in radiation fields using a coupled binary-collision Monte Carlo phase field approach

The simulation of radiation effects in materials broadly falls into two categories. At short time and length scales lies the modeling of primary radiation damage, such as point defect creation, energy deposition, and ballistic mixing. This is followed by the modeling at longer time scales of thermally activated microstructure evolution and defect reactions, such as recombination, clustering, and coarsening. The binary collision Monte Carlo method is an established, numerically efficient method for the computation of primary radiation damage. Conversely, the phase field method is a state of the art method for microstructure evolution on longer time and length scales. Here we present a concurrent coupling of these two methods, overcoming the difference between the discrete object Monte Carlo paradigm for primary radiation damage and the continuum field variable approach for microstructure evolution. The coupling is bidirectional, in which the microstructure evolution in the MOOSE finite element frame- work provides the spatial scattering data set for the charged particle trans- port and receives point defect, mass transport, and heat source terms from the simulated collision cascades that contribute to the field variable evolution. The concurrent coupling scheme is implemented in the code Magpie and demonstrated by investigating patterning for a model irradiated immiscible binary alloy. The results from the coupled binary collision Monte Carlo/phase field simulations reproduce the results of analytical models for phase separation, phase mixing, and patterning, supporting the approach and indicating its utility for modeling real materials systems.

36 MATERIALS SCIENCE↗