Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point defect diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reaction–drift–diffusion models from master equations: application to material defects

We present a general method to produce well-conditioned continuum reaction–drift–diffusion equations directly from master equations on a discrete, periodic state space. We assume the underlying data to be kinetic Monte Carlo models (i.e. continuous-time Markov chains) produced from atomic sampling of point defects in locally periodic environments, such as perfect lattices, ordered surface structures or dislocation cores, possibly under the influence of a slowly varying external field. Our approach also applies to any discrete, periodic Markov chain. Here, the analysis identifies a previously omitted non-equilibrium drift term, present even in the absence of external forces, which can compete in magnitude with the reaction rates, thus being essential to correctly capture the kinetics. To remove fast modes which hinder time integration, we use a generalized Bloch relation to efficiently calculate the eigenspectrum of the master equation. A well conditioned continuum equation then emerges by searching for spectral gaps in the long wavelength limit, using an established kinetic clustering algorithm to define a proper reduced, Markovian state space.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Oxygen tracer diffusion in single-crystal alumina

Oxygen tracer diffusion coefficients are determined in single-crystal alumina samples with differing dopant levels using the gas-exchange technique. The diffusion direction is parallel to the c-axis and the ambient PO2 is 1 atm (100,000 Pa) for all experiments except a single run with a low PO2, approximately 10 to the -15th atm (10 to the -10th Pa) produced by a CO/CO2 mixture. The diffusion is insensitive to both impurities and ambient PO2. The insensitivities are discussed in terms of point-defect clustering. Prior tracer studies are compared and discussed.

Cawley, James D.↗
DOE OSTI2020

Comparative Studies of Optoelectrical Properties of Prominent PV Materials: Halide Perovskite, CdTe, and GaAs

We compare three representative high performance PV materials: halide perovskite MAPbI3, CdTe, and GaAs, in terms of photoluminescence (PL) efficiency, PL lineshape, carrier diffusion, and surface recombination and passivation, over multiple orders of photo-excitation density or carrier density appropriate for different applications. An analytic model is used to describe the excitation density dependence of PL intensity and extract the internal PL efficiency and multiple pertinent recombination parameters. A PL imaging technique is used to obtain carrier diffusion length without using a PL quencher, thus, free of unintended influence beyond pure diffusion. Our results show that perovskite samples tend to exhibit lower Shockley-Read-Hall (SRH) recombination rate in both bulk and surface, thus higher PL efficiency than the inorganic counterparts, particularly under low excitation density, even with no or preliminary surface passivation. PL lineshape and diffusion analysis indicate that there is considerable structural disordering in the perovskite materials, and thus photo-generated carriers are not in global thermal equilibrium, which in turn suppresses the nonradiative recombination. This study suggests that relatively low point-defect density, less detrimental surface recombination, and moderate structural disordering contribute to the high PV efficiency in the perovskite. This comparative photovoltaics study provides more insights into the fundamental material science and the search for optimal device designs by learning from different technologies.

14 SOLAR ENERGY↗
NASA NTRS1984

Stress studies in EFG

Electrical characterization of defects induced in FZ and CZ silicon stress in four-point bending above 1200 C was started. Techniques to study electrical activity that will permit correlation of defect activity with diffusion length and with room and low temperature EBIC are being developed. Preliminary characterization of defects in ribbon grown at very low speeds of less than 1 cm/min shows that the dislocation density is very low over significant regions of cross section, while regions of high dislocation density (approx. 5 x 10(6)/cm(2)) occur in bands in a number of places. Addition measurements of stress distributions in EFG material were obtained at the University of Illinois using shadow-Moire interferometry.

Source record↗
NASA NTRS2004

Stimulated Mid-Infrared Luminescence Experiment: Contribution to the Study of Pre-Earthquake Phenomena and UV Absorption by Interstellar Dust

The work performed under this proposal is based on the experimentally supported observation - or inference - that a small fraction of the oxygen anions in silicate minerals in igneous and high-grade metamorphic rocks on Earth may not be in the usual 2- oxidation state, O(sup 2-), but in a higher oxidation state, as O(sup -). If this is true, the same would likely apply to the fine dust that fills the diffuse interstellar medium. An (sup -) in a matrix of O(sup 2-) represents a defect electron in the valence band, also known as positive hole or p-hole for short. When two O(sup -) combine, they undergo spin-pairing and form a positive hole pair, PHP. Chemically speaking a PHP is a peroxy bond. In an oxide matrix a peroxy bond takes the form of a peroxy anion, O2(sup 2-). In a silicate matrix it probably exists in the form of peroxy links between adjacent [SiO4] tetrahedral, O3Si00\SiO3. From a physics perspective a PHP is an electrically inactive point defect, which contains dormant electronic charge carriers. When the peroxy bond breaks, p-hole charge carriers are released. These p-holes are diffusively mobile and spread through the O 2p-dominated valence band of the otherwise insulating mineral matrix.

Freund, Friedemann↗
DOE OSTI2021

Molecular dynamics simulations of radiation cascade evolution near cellular dislocation structures in additively manufactured stainless steels

The dislocation dense cellular structures observed in additively manufactured (AM) stainless steels can allow these materials to have enhanced strength and ductility compared to conventionally manufactured materials. Effective design of radiation resistant materials often necessitates creating microstructures containing of a high density of dislocations that act as sinks for radiation induced defects. This work uses molecular dynamics simulations to study the impact of pre-existing defects on radiation damage in stainless steel 316L fabricated by the laser powder bed fusion process. The evolution of synthetically generated dislocations in a crystal system in response to multiple radiation collision cascades suggest that dislocation dense regions reduce the probability of surviving point defects forming clusters. This finding seems to result from the dislocation cores’ ability to absorb point defects, thereby limiting the formation of clusters during the recombination phase. However, after successive cascades, the ability of the dislocation entanglement to prevent defect formation is diminished and defect cluster formation trends to an equilibrium. Accordingly, it is hypothesized that in an experimental setting the dislocation cells will initially act as neutral sinks for point defects, potentially delaying the onset of radiation damage effects; but, these structures will be degraded due to radiation-enhanced diffusion and lose their effectiveness at doses above 1.5–2 displacements per atom. Nevertheless, the ability to produce complex and feature-specific microstructures suggests promise for the design of radiation tolerant materials using AM methods.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In situ microstructural evolution in face-centered and body-centered cubic complex concentrated solid-solution alloys under heavy ion irradiation

This study characterizes the microstructural evolution of single-phase complex concentrated solid-solution alloy (CSA) compositions under heavy ion irradiation with the goal of evaluating mechanisms for CSA radiation tolerance in advanced fission systems. Three such alloys, Cr 18 Fe 27 Mn 27 Ni 28 , Cr 15 Fe 35 Mn 15 Ni 35 , and equimolar NbTaTiV, along with reference materials (pure Ni and E90 for the Cr-FeMnNi family and pure V for NbTaTiV) were irradiated at 50 K and 773 K with 1 MeV Kr ++ ions to various levels of displacements per atom (dpa) using in-situ transmission electron microscopy. Cryogenic irradiation resulted in small defect clusters and faulted dislocation loops as large as 12 nm in face-centered cubic (FCC) CSAs. With thermal diffusion suppressed at cryogenic temperatures, defect densities were lower in all CSAs than in their less compositionally complex reference materials indicating that point defect production is reduced during the displacement cascade stage. High temperature irradiation of the two FCC CSA resulted in the formation of interstitial dislocation loops which by 2 dpa grew to an average size of 27 nm in Cr 18 Fe 27 Mn 27 Ni 28 and 10 nm in Cr 15 Fe 35 Mn 15 Ni 35 . This difference in loop growth kinetics was attributed to the difference in Mn-content due to its effect on the nucleation rate by increasing vacancy mobility or reducing the stacking-fault energy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Solute segregation and precipitation across damage rates in dual-ion–irradiated T91 steel

We report that dual-ion irradiations using 5.0 MeV defocused Fe 2+ ions and co-injected energy degraded 2.00 to 2.85 MeV He 2+ ions were conducted on a Fe9CrMo ferritic-martensitic steel T91 to 17 dpa at a damage rate range of 5 × 10 -5 dpa/s to 3 × 10 -3 dpa/s at 445°C, followed by characterization of the microstructure using conventional and scanning transmission electron microscopy. Radiation induced Ni/Si clusters and radiation induced segregation were quantified using energy dispersive X-ray spectroscopy at each condition and were compared with the same material irradiated in the BOR-60 reactor and in the as-received condition. No significant Cr segregation was found at lath boundaries after dual-ion irradiation, while Ni and Si enrichments both decreased with increasing damage rate leading to a sharp decrease in the density of Ni/Si clusters with damage rate. Increased point defect recombination at higher ion damage rates likely reduced the Ni/Si cluster density compared with BOR-60. Although the overall vacancy concentration and diffusion are enhanced by the irradiation damage rate, the lack of time for thermal diffusion and ballistic displacements of solutes are significant limiting factors for Ni/Si cluster formation. This work demonstrates the effect of irradiation damage rate on elemental segregation and clustering when using ion irradiation to simulate reactor irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coupled Process/Device Modeling and Point Defect Engineering of Cu(In,Ga)Se 2 Solar Cells

Point defects directly impact solar cell device performance by limiting the carrier lifetime. In this work, density functional theory calculations are first used to determine the formation energy and diffusion energy barriers of dominant defects in Cu(In,Ga)Se 2 . Next, continuum reaction–diffusion models are developed to analyze the redistribution of defects during manufacturing processes. We estimate defect capture cross sections using a first-principles-based approach. Here, these cross sections are combined with our calculated defect profiles and trap energy levels to parameterize a Shockley–Read–Hall recombination model, which we implement into a device simulator to predict carrier lifetimes and device performance. In that way, a predictive technology computer aided design model is built to predict and optimize the performance of Cu(In,Ga)Se 2 solar cells.

14 SOLAR ENERGY↗
DOE OSTI2023

Nanoscale mapping of point defect concentrations with $\mathrm{4D-STEM}$

Vacancies are missing atoms in a crystalline material, and occur both at equilibrium (varying with temperature) and out of equilibrium such as when crystalline materials are damaged with radiation or corrosion. While we know of their importance, particularly regarding diffusive mechanisms, it is not straightforward to experimentally measure their concentration or to visualize them directly. Traditionally, measurements such as positron annihilation spectroscopy and to some degree X-ray diffraction can measure average concentrations, but generally lack the ability to visualize or quantify a heterogenous concentration of vacancies that can occur at the level of individual defects and microstructural features. Here, we present a method to map vacancy concentrations and their distribution using local lattice parameter measurements with a high-resolution electron microscope. Our method utilizes a Au thin film as a model to demonstrate the method via four-dimensional scanning transmission electron microscopy (4D-STEM) by correlating the differences between changes in lattice parameter and the volumetric thermal expansion during in situ heating experiments. The vacancy mapping methodology is also applied to non-equilibrium defects accumulated in pure Al via knock-on electron beam irradiation. Our method demonstrates the ability to map point defect concentrations in heterogeneous systems in situ with nanometer spatial resolution. The result is a technique that can provide direct measurements of vacancy concentrations at the level of individual defects in studies of materials in and out of equilibrium.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Modeling of Ternary Element Site Substitution in NiAl

It is well recognized that ternary alloying additions can have a dramatic impact on the behavior of ordered intermetallic alloys such as nickel aluminides. Properties as diverse as yield strength, fracture strength, fracture mode, cyclic oxidation resistance, creep strength, and thermal and electrical diffusivity can change by orders of magnitude when a few percent or less of a ternary element is added. Yet our understanding of the resulting point defect structures and the simple site preferences of ternary alloying additions is poor because these are extremely difficult characteristics to determine. This disconnection between the understanding of the structure and properties in ordered alloys is at least in part responsible for the limited development and commercialization of these materials. Theoretical methods have provided useful but limited insight in this area, since most techniques suffer from constraints in the type of elements and the crystallographic structures that can be modeled. In an effort to overcome these limitations, the Bozzolo-Ferrante-Smith (BFS) method for alloys was designed. After a brief description of this approximate quantum mechanical approach, we use BFS to investigate the energetics of Si, Ti, V, Cr, Fe, Co, Cu, Zr, Nb, Mo, Ru, Hf, Ta and W additions to B2-ordered, stoichiometric NiAl. In addition to determining the site preference for these alloying additions over a range of compositions, we include results for the concentration dependence of the lattice parameter. In this introductory paper, we performed our analyses in the absence of constitutional and thermal vacancies for alloys of the form Ni50(Al,X)50. Where data exist, a comparison between experimental, theoretical, and BFS results is also included.

Bozzolo, Guillermo↗
DOE OSTI2022

Estimates of Quantum Tunneling Effects for Hydrogen Diffusion in PuO 2

We detail the estimation of activation energies and quantum nuclear vibrational tunneling effects for hydrogen diffusion in PuO 2 based on Density Functional Theory calculations and a quantum double well approximation. We find that results are relatively insensitive to choice of exchange correlation functional. In addition, the representation of spin in the system and use of an extended Hubbard U correction has only a small effect on hydrogen point defect formation energies when the PuO 2 lattice is held fixed at the experimental density. We then compute approximate activation energies for transitions between hydrogen interstitial sites seeded by a semi-empirical quantum model and determine the quantum tunneling enhancement relative to classical kinetic rates. Our model indicates that diffusion rates in H/PuO 2 systems could be enhanced by more than one order of magnitude at ambient conditions and that these effects persist at high temperature. The method we propose here can be used as a fast screening tool for assessing possible quantum nuclear vibrational effects in any number of condensed phase materials and surfaces, where hydrogen hopping tends to follow well defined minimum energy pathways.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Visualization of dynamic polaronic strain fields in hybrid lead halide perovskites

Excitation localization involving dynamic nanoscale distortions is a central aspect of photocatalysis, quantum materials and molecular optoelectronics. Experimental characterization of such distortions requires techniques sensitive to the formation of point-defect-like local structural rearrangements in real time. Here, we visualize excitation-induced strain fields in a prototypical member of the lead halide perovskites via femtosecond resolution diffuse X-ray scattering measurements. Here, this enables momentum-resolved phonon spectroscopy of the locally distorted structure and reveals radially expanding nanometre-scale strain fields associated with the formation and relaxation of polarons in photoexcited perovskites. Quantitative estimates of the magnitude and shape of this polaronic distortion are obtained, providing direct insights into the dynamic structural distortions that occur in these materials. Optical pump–probe reflection spectroscopy corroborates these results and shows how these large polaronic distortions transiently modify the carrier effective mass, providing a unified picture of the coupled structural and electronic dynamics that underlie the optoelectronic functionality of the hybrid perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

The ramp-reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non-volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non-volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (VO 2 ), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion-segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest-neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much-needed theoretical framework for optimizing device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of native defects and their diffusivity in CdTe

CdTe is a leading thin-film technology for solar-cell applications. Basic features such as the optimum band gap of 1.5 eV and simple manufacturing process have been driving the research on improving the current record efficiency of 22% for CdTe solar cells toward the theoretical limit of 32%. Low p-type doping and short carrier lifetimes in the CdTe absorber have been suggested as the main limiting factors and attributed to defect compensation and carrier recombination. Understanding the role of point defects and impurities in CdTe is crucial to solving these problems. Despite many years of research, the sources of compensation and the microscopic recombination mechanisms are still unclear. By using hybrid density functional calculations with spin-orbit coupling and large supercells, we investigate the electronic properties, the formation energies, and the diffusivities of the native defects in CdTe. As possible sources of compensation for p-type conductivity, we discuss the structural and electronic properties of Cd interstitial, Te vacancies, and TeCd antisites. The stability of each defect is discussed in terms of both the defect formation energy and the migration barrier. We also address possible mechanisms that lead to non-radiative recombination.

14 SOLAR ENERGY↗
DOE OSTI2022

Structure, Stability, and Electronic Properties of Boron Suboxide: A Density Functional Theory Study

Boron suboxide (B 6 O) is a boron-rich compound derived from the α-rhombohedral boron lattice with extreme hardness and unusual semiconducting properties. In this work, density functional theory (DFT) was used to show that unit cell volume, mechanical strength, band gaps, and thermodynamic stabilities of B 6 O were influenced by the interstitial elements and point defects at the icosahedral sites. While the hexagonal unit cell volume (HUCV) varies with interstitial occupancy, it is the icosahedral defect that weakens the intrinsic bulk modulus of B 6 O. Using the hybrid HSE functional, we confirmed that the perfect B 6 O bulk is a p-type semiconductor with a direct band gap of 2.8 eV. Furthermore, by screening α-boron compounds systematically, we found that a simple octet rule may offer a consistent explanation for the variations in the computed electronic structures. The formation free energies calculated over a wide range of temperatures (0–2500 K) and pressures (0–80 GPa) predict that formations of interstitial defects become favorable only at higher temperatures (ca. 1800 K) in bulk B 6 O lattices. The nudged elastic band (NEB) method was employed to identify the minimum energy pathways for the diffusions of dislocated B and O atoms. The diffusion of icosahedral B atoms has an energy barrier of 0.16 eV. More complex B diffusion paths involving the reorganization of icosahedral boron atoms incur higher barriers (>1 eV). In contrast, the diffusion of interstitial O atoms is facile with a barrier of 0.4 eV. Lastly, successive O insertions into the α-B lattice were performed using DFT to generate a basic understanding of the oxidation process. Furthermore, these calculations provide fundamental atomistic insights into the growth of B 6 O crystals and control of their point defects.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hole Polaron Transport in Bismuth Vanadate BiVO 4 from Hybrid Density Functional Theory

In this paper, we address the chemical character and the mobility of hole polarons in BiVO 4 (BVO). Two distinct structures for hole polarons in BVO have been reported in the literature to date. “Standard” hybrid density functional theory (DFT) calculations have predicted hole polarons to be (BiO 8 ) dodecahedron-centered polarons, while Hubbard U-DFT (DFT + U) calculations have predicted single oxygen atom-centered polarons. Resolving these contrasting findings is critical to validate theory in materials research. We investigated the structure of hole polarons in BVO using hybrid DFT with varying fractions (α) of the exact exchange interaction that enters hybrid functionals. For values of the fraction α, from α = 0.25 to α = 0.45, we obtained both structures, the h + (BiO 8 ) hole structure and the h + (O) hole structure. For the smaller values of α, the h + (BiO 8 ) structure is lower in energy, while for the larger values of α, the h+(O) structure is more stable. The piece-wise linearity of DFT energies E(q) with respect to a point defect charge q is maintained satisfactorily in all cases, although the deviation is the smallest for hybrid DFT with a small exact exchange fraction. For α = 0.25, we determined the diffusivity of h + (BiO 8 ) holes from the Marcus/Holstein two-state model. The activation barrier for Bi-to-Bi hops (ΔG # ~76 meV) and mobility (μ ~0.029 cm2 V –1 s –1 ) are found to be in close agreement with the published THz experimental data (ΔG # ~90 meV and μ exp ~0.02 cm2 V –1 s –1 , respectively). In h + (BiO 8 ) structures, nearly 25% of the hole charge and unpaired spin reside on the Bi atom and the rest is divided among the eight O atoms. The hole is best described as a Bi-centered hole, rather than a Bi 6s hole. In contrast, in h + (O) structures, about 75% of the unpaired spin population resides on the O atom. These findings suggest that if one wishes to resolve this theoretical dichotomy, there remains a need for further experimental characterization of hole polarons in BVO with techniques that could identify the oxidation state of Bi and O atoms in operando conditions and help validate theoretical results of structure and transport.

14 SOLAR ENERGY↗
DOE OSTI2025

Radiation-induced vacancy injection in heterogeneous multiphase materials

Understanding the synergy between corrosion and defect dynamics is a key consideration in the development of advanced materials for extreme environments. Here, we reveal a surprising phenomenon for the transport of point defects induced by irradiation in a heterogeneous multiphase structure of a metal and an oxide, similar to that formed under metal corrosion that takes place in most environments. Despite the confinement of the produced damage within the oxide, vacancies were injected into the unirradiated metal and coarsened with dose. Furthermore, the results show that the nature of the oxide layer dictates the defect evolution in the metal layer. This work reveals an interesting mechanism for point defect interactions in multiphase materials, with broad implications in many fields, while also emphasizing the complex coupling between corrosion and irradiation. Corrosion leads to the formation of multiphase materials, while irradiation enhances diffusion within the heterogeneous phases, which can impact corrosion rates.

36 MATERIALS SCIENCE↗