SEARCH · Search NASA

Results for “RAPID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Final Technical Report - Rapid Surface Microanalysis using a Low Temperature Plasma

This project focused on improving our current understanding and scientific knowledge in the area of plasma-surface interactions and plasma assisted material synthesis related to advanced microelectronics and nanotechnology. Current challenges include: controlling the interaction of Low Temperature Plasma (LTP) with a single layer of atoms to manufacture integrated circuits, continued miniaturization of integrated circuits, LTP processing of material surfaces and thin films to enable industrial scale fabrication of advanced microelectronics, synthesis of new materials, nanomaterials, nanotubes, and complex materials, Technology developed in this subtopic is of value to either (i) enable scans of surfaces (~1 sq. cm area) using various microscopies (electron, optical, other) at high resolution (micron or sub-micron resolution) rapidly (hours or days rather than years to complete a high-resolution scan of such a large surface area), or (ii) enable scans of surfaces (~1 sq. cm area) using various microscopies (electron, optical, other) at relatively low resolution rapidly, then apply algorithms to select spots for micron-scale imaging. Sputtering occurs when particles of a solid material are ejected from its surface by energetic particles from a plasma. While the degradation of the solid material and the subsequent deposition of the ejected material onto vulnerable surfaces are the usual subjects of sputtering studies, plasma science has yet to be combined with sputtering to create new diagnostics devices and systems. Small changes in the design of the plasma discharge device make it possible to create broad plasma beams for rapid scanning or small plasma beams to obtain the distribution of ejected elements with micron resolution. In the high-resolution use, the ion flux is extracted from the gas-discharge plasma and focused by a spherical emission surface to micron sizes onto the target specimen, providing very local sputtering and local elemental analysis. We call this “self-focusing”. The radiation from the excited and ionized sputtered atoms is recorded by a spectrometer through a window and fiberglass cable and analyzed with standard software packages used for optical glow discharge spectroscopy. Computer simulations of beam formation were used to verify and optimize the designs to be tested. A prototype was designed, constructed, and used to start experiments of beam formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

TuFF internal WRAP for Rapid Pipeline Repair (TuFF iWRAP)

The goal of “TuFF internal WRAP for Rapid Pipeline Repair” (TuFF iWRAP) program was to develop a novel material system and placement process to fabricate structural pipe within the existing deteriorated pipelines without disruption of gas delivery. The team (University of Delaware – Center for Composite Materials (UD-CCM) and Plitzie Inc.) addressed this challenge by developing a new material feedstock and pipe in pipe (PIP) repair strategy. This allows the potential for significant cost reduction and has minimum operational impact on gas customers. The new robotic based placement design allows discontinuous placement of pipe sections creating a stand-alone structural liner within the legacy pipeline without the need for pipe shutdown. Here, the material is supplied using a tethered material feeding system and is placed and UV cured with the internal Wound Rapid Automated Placement (iWRAP) system. This provides maximum placement efficiency capable of traversing 90 angle bends in 12-inch pipe and overall design customization to meet pipe repair requirements (e.g., variable wall thickness, bridging gaps, etc.). UV-curable fiber reinforced composite material has been optimized to meet structural performance and placement/cure times. Superior strength and fatigue life has been demonstrated by improving fiber-matrix adhesion using new fiber sizing for UV resins. Rapid cure approaches using new liner and resins have been evaluated with industry. The appropriate design of the section joints has been developed and tested. We estimate coating time to be ~100 hours per mile enabling typical pipe repair within 1 week.

03 NATURAL GAS↗

DOE OSTI2025

Rapid Oxidation of Uranium Steel Alloys: Combustion Synthesis

This project explored the use of combustion synthesis as a rapid, high-temperature method for oxidizing uranium-bearing steel alloys. Traditional laboratory-scale synthesis methods often fail to replicate the thermal and kinetic conditions experienced by real-world particulates, particularly those formed under rapid quenching or high-temperature scenarios. Combustion synthesis offers a promising alternative by enabling fast, localized heating and flexible precursor selection. A series of targeted experiments were conducted using a U 2 NiCrFe 4 alloy as the precursor. The alloy was oxidized using combustion synthesis reactions fueled by uranyl nitrate and glycine, achieving peak temperatures exceeding 1,200 °C. Postreaction analysis using scanning electron microscopy (SEM), elemental mapping, and Raman spectroscopy revealed the formation of iron-based oxides, with limited but detectable evidence of uranium oxide phases such as UO 2 . The results indicate that under the rapid reaction and cooling conditions of combustion synthesis, iron oxides form preferentially, but uranium oxide formation is kinetically limited. These findings validate combustion synthesis as a viable method for simulating the oxidation behavior of uranium steels in extreme environments and lay the groundwork for future studies aimed at enhancing uranium oxide formation through higher temperatures or modified precursor compositions.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Rapid Detection and Quick Characterization of African Swine Fever Virus Using the VolTRAX Automated Library Preparation Platform

African swine fever virus (ASFV) is the causative agent of a severe and highly contagious viral disease affecting domestic and wild swine. The current ASFV pandemic strain has a high mortality rate, severely impacting pig production and, for countries suffering outbreaks, preventing the export of their pig products for international trade. Early detection and diagnosis of ASFV is necessary to control new outbreaks before the disease spreads rapidly. One of the rate-limiting steps to identify ASFV by next-generation sequencing platforms is library preparation. Here, we investigated the capability of the Oxford Nanopore Technologies’ VolTRAX platform for automated DNA library preparation with downstream sequencing on Nanopore sequencing platforms as a proof-of-concept study to rapidly identify the strain of ASFV. Within minutes, DNA libraries prepared using VolTRAX generated near-full genome sequences of ASFV. Thus, our data highlight the use of the VolTRAX as a platform for automated library preparation, coupled with sequencing on the MinION Mk1C for field sequencing or GridION within a laboratory setting. These results suggest a proof-of-concept study that VolTRAX is an effective tool for library preparation that can be used for the rapid and real-time detection of ASFV.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1976

International Conference on Rapidly Quenched Metals, 2nd, Massachusetts Institute of Technology, Cambridge, Mass., November 17-19, 1975, Proceedings

The range of topics covered by the papers includes: rapid quenching (and specifically splat quenching) of metals, spin quenching, levitation melting, rapid quenching from liquid state; amorphous metal phases and metastable phases, metallic glasses, ribbons, splats, films, metal ribbon reinforced resins; crystallization of metallic glasses, and ferromagnetic amorphous alloys. Structural models for amorphous metals, splat-quenching equipment, and measurements of the properties of amorphous and noncrystalline metals and metallic glasses are also discussed, in addition to: fatigue events (crack propagation) in amorphous metals, fracture behavior in rapidly quenched metals, ductile superconducting Cu-Nb-Sn alloys, and semiconducting amorphous V205 alloy. Individual items are announced in this issue.

Source record↗

NASA NTRS1982

Rapid solidification processing

Rapid solidification in materials was studied. Crystalline and noncrystalline metals, polymers, ceramics, solidification mechanism and resulting structure, innovative processing techniques, properties and applications are investigated. The following programs are outlined: alloys which offer high strength at elevated temperatures, and processing methods necessary to achieve these goals; structure and structure property relations in ferrous alloys; Corrosion related aspects and high temperature oxidation resistance of fine grained alloys; relation of solidification theory to structures produced, on innovative processes for rapid solidification, and on solidification at high undercoolings. Studies on rapid solidification of polymeric materials are demonstrated.

Source record↗

NASA NTRS1982

A Corrosion Control Manual for Rail Rapid Transit

This manual addresses corrosion problems in the design, contruction, and maintenance of rapid transit systems. Design and maintenance solutions are provided for each problem covered. The scope encompasses all facilities of urban rapid transit systems: structures and tracks, platforms and stations, power and signals, and cars. The types of corrosion and their causes as well as rapid transit properties are described. Corrosion control committees, and NASA, DOD, and ASTM specifications and design criteria to which reference is made in the manual are listed. A bibliography of papers and excerpts of reports is provided and a glossary of frequently used terms is included.

Gilbert, L. O.↗

NASA NTRS1984

Rapid adhesive bonding concepts

Adhesive bonding in the aerospace industry typically utilizes autoclaves or presses which have considerable thermal mass. As a consequence, the rates of heatup and cooldown of the bonded parts are limited and the total time and cost of the bonding process is often relatively high. Many of the adhesives themselves do not inherently require long processing times. Bonding could be performed rapidly if the heat was concentrated in the bond lines or at least in the adherends. Rapid adhesive bonding concepts were developed to utilize induction heating techniques to provide heat directly to the bond line and/or adherends without heating the entire structure, supports, and fixtures of a bonding assembly. Bonding times for specimens are cut by a factor of 10 to 100 compared to standard press bonding. The development of rapid adhesive bonding for lap shear specimens (per ASTM D1003 and D3163), for aerospace panel bonding, and for field repair needs of metallic and advanced fiber reinforced polymeric matrix composite structures are reviewed.

Stein, B. A.↗

NASA NTRS1985

Rapid adhesive bonding and field repair of aerospace materials

Adhesive bonding in the aerospace industry typically utilizes autoclaves or presses which have considerable thermal mass. As a consequence, the rates of heatup and cooldown of the bonded parts are limited and the total time and cost of the bonding process are often relatively high. Many of the adhesives themselves do not inherently require long processing times. Bonding could be performed rapidly if the heat was concentrated in the bond lines or at least in the adherends. Rapid Adhesive Bonding concepts are developed to utilize induction heating techniques to provide heat directly to the bond line and/or adherends without heating the entire structure, supports, and fixtures of a bonding assembly. Bonding times for specimens can be cut by a factor of 10 to 100 compared to standard press or autoclave bonding. The development of Rapid Adhesive Bonding for lap shear specimens (per ASTM D1002 and D3163), for aerospace panel or component bonding, and for field repair needs of metallic and advanced fiber reinforced polymeric-matrix composite structures is reviewed. Equipment and procedures are described for bonding and repairing thin sheets, simple geometries, and honeycomb core panels.

Stein, B. A.↗

NASA NTRS1986

Testing techniques for mechanical characterization of rapidly solidified materials

Mechanical property testing techniques are reviewed for rapidly solidified materials. Mechanical testing of rapidly solidified materials is complicated by the fact that in most cases at least one dimension of the material is very small (less than 100 microns). For some geometries, i.e., powder or thin surface layers, microhardness is the only feasible mechanical test. The ribbon geometry which is obtained by the melt-spinning method, however, has been used for a variety of mechanical property measurements including elastic properties, tensile properties, fracture toughness, creep, and fatigue. These techniques are described with emphasis placed on the precautions required by the restricted geometry of rapidly solidified specimens.

Koch, C. C.↗

NASA NTRS1988

Furnace For Rapid Melting And Freezing

Proposed furnace rapidly heats and cools specimens in material-processing experiments. Preheated specimen heated rapidly above melting temperature by contact with hotter, more massive object. Once molten, cooled rapidly with flowing gas. Particularly useful for experiments requiring artificial low gravitation produced by flying KC-135 airplanes in parabolic trajectories.

Ethridge, Edwin C.↗

NASA NTRS1987

The decay of isotropic turbulence in a rapidly rotating frame

A direct numerical simulation of the decay of initially isotropic turbulence in a rapidly rotating frame was conducted. This 128 x 128 x 128 simulation was completed for a Reynolds number Re sub lambda = 15.3 and a Rossby number Ro sub lambda = 0.07 based on the initial turbulent kinetic energy and Taylor microscale. The numerical results indicate that the turbulence remains essentially isotropic during the major part of the decay (i.e., beyond the point where the turbulent kinetic energy has decayed to less than 10 percent of its initial value). The rapid rotation has the primary effect of shutting off the energy transfer so that the turbulence dissipation (and hence the rate of decay of the turbulent kinetic energy) is substantially reduced. Consequently, the anisotropy tensor remains essentially unchanged while the energy spectrum undergoes a nearly linear viscous decay (the same results that are predicted by Rapid Distortion Theory which is only formally valid for much shorter elapsed times. Surprisingly, no Taylor-Proudman reorganization of the flow to a two-dimensional state is observed. The implications that these results have on turbulence modeling are discussed briefly along with prospective future research.

Speziale, C. G.↗

NASA NTRS1987

Rapidly solidified metal coatings by peen plating

Specimens of 7075-T6 aluminum alloy were peen plated with rapidly solidified tin-lead and aluminum powders, and the cross-sections of the coated specimens were examined by light and electron microscopy. The properties of the peen plated specimens were also compared with those of shot peened specimens without any coating. It is found that peen plating with rapidly solidified metals improves the fatigue properties of the coated samples to a greater extent than shot peening alone. Specimens of 7075-T6 alloy peen plated with rapidly solidified tin-lead and aluminum exhibited better fatigue resistance than shot peened specimens in both air and salt water.

Chu, H. P.↗

NASA NTRS1989

The role of rapid solidification processing in the fabrication of fiber reinforced metal matrix composites

Advanced composite processing techniques for fiber reinforced metal matrix composites require the flexibility to meet several widespread objectives. The development of uniquely desired matrix microstructures and uniformly arrayed fiber spacing with sufficient bonding between fiber and matrix to transmit load between them without degradation to the fiber or matrix are the minimum requirements necessary of any fabrication process. For most applications these criteria can be met by fabricating composite monotapes which are then consolidated into composite panels or more complicated components such as fiber reinforced turbine blades. Regardless of the end component, composite monotapes are the building blocks from which near net shape composite structures can be formed. The most common methods for forming composite monotapes are the powder cloth, foil/fiber, plasma spray, and arc spray processes. These practices, however, employ rapid solidification techniques in processing of the composite matrix phase. Consequently, rapid solidification processes play a vital and yet generally overlooked role in composite fabrication. The future potential of rapid solidification processing is discussed.

Locci, Ivan E.↗

NASA NTRS1989

A Survey of Measurements and Measuring Techniques in Rapidly Distorted Compressible Turbulent Boundary Layers

A wide range of recent work on compressible turbulent boundary layers is described. Special attention was paid to flows with rapid changes in pressure including flows with shock waves, curved walls, and expansions. The application of rapid distortion theory to flows transversing expansion and shock waves is reviewed. This is followed by an account of experiments aimed at elucidating the large scale structures present in supersonic boundary layers. The current status of laser-Doppler and hot-wire anemometry in supersonic flow is discussed, and a new interferometric technique for the determination of wall-stress is described. The use of small pressure transducers to deduce information about the structure of zero pressure-gradient and severely perturbed boundary layers is investigated. Finally, there is an extension of the data presentation of AGARDographs 223, 253 and 263 to cover rapidly distorted boundary layers.

Fernholz, H. H.↗

NASA NTRS1988

Rapid solidification of Nb-base alloys

New Nb-base alloys are of interest for aerospace structural applications at high temperatures, viz, 800 to 1650 C. Fundamental information regarding the effects of rapid solidification in achieving greatly refined microstructures, extended solid solubility, suppression of embrittling equilibrium phases, and formation of new phases is desired in a number of Nb-X alloys. The microstructures and selected properties of Nb-Si and other Nb-base alloys are presented for materials both rapidly quenched from the equilibrium liquidus and rapidly solidified following deep supercooling. Electromagnetic levitation was used to achieve melting and supercooling in a containerless inert gas environment. A variety of solidification conditions were employed including splatting or drop casting of supercooled samples. The morphology and composition of phases formed are discussed in terms of both solidification history and bulk composition.

Gokhale, A. B.↗

NASA NTRS1991

Marine record of late quaternary glacial-interglacial fluctuations in the Ross Sea and evidence for rapid, episodic sea level change due to marine ice sheet collapse

Some of the questions to be addressed by SeaRISE include: (1) what was the configuration of the West Antarctic ice sheet during the last glacial maximum; (2) What is its configuration during a glacial minimum; and (3) has it, or any marine ice sheet, undergone episodic rapid mass wasting. These questions are addressed in terms of what is known about the history of the marine ice sheet, specifically in Ross Sea, and what further studies are required to resolve these problems. A second question concerns the extent to which disintegration of marine ice sheets may result in rises in sea level that are episodic in nature and extremely rapid, as suggested by several glaciologists. Evidence that rapid, episodic sea level changes have occurred during the Holocene is also reviewed.

Anderson, John B.↗

NASA NTRS1990

Cation distributions on rapidly solidified cobalt ferrite

The cation distributions in two rapidly solidified cobalt ferrites have been determined using Moessbauer spectroscopy at 4.2 K in an 8-T magnetic field. The samples were obtained by gas atomization of a Co0-Fe2O3-P2O5 melt. The degree of cation disorder in both cases was greater than is obtainable by cooling unmelted cobalt ferrite. The more rapidly cooled sample exhibited a smaller departure from the equilibrium cation distribution than did the more slowly cooled sample. This result is explained on the basis of two competing effects of rapid solidification: high cooling rate of the solid, and large undercooling.

De Guire, Mark R.↗