SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
CO 2 BOLs are promising CCS solvents, whose mass transfer rates improve upon cooling. We show this unintuitive behavior is due to slow transport of reaction products from the gas–liquid interface, caused by shifts in reaction equilibria.
Significance The exothermic metamorphic reaction in orthopyroxene (Opx), a major component of oceanic lithospheric mantle, is shown to trigger brittle failure in laboratory deformation experiments under conditions where garnet exsolution takes place. The reaction product is an extremely fine-grained material, forming narrow reaction zones that are mechanically weak, thereby facilitating macroscopic faulting. Oceanic subduction zones are characterized by two separate bands of seismicity, known as the double seismic zone. The upper band of seismicity, located in the oceanic crust, is well explained by dehydration-induced mechanical instability. Our newly discovered metamorphism-induced mechanical instability provides an alternative physical mechanism for earthquakes in the lower band of seismicity (located in the oceanic lithospheric mantle), with no requirement of hydration/dehydration processes.
MOSCATO (Molten Salt Chemistry and Transport) is a multiphysics code that provides high-fidelity, coupled simulations of fluid flow, heat transfer, mass transfer, chemistry, electrochemical phenomena, and alloy corrosion for molten salt systems. In FY25, significant developments were made to the code package, enhancing its capabilities for modeling all relevant phenomena within operating moltens salt reactors (MSRs). The developments and activities in FY25 included: 1. Implementation of Level-Set methods to enable modeling of single-bubble behavior in molten salts. In FY25, the Level-Set two-phase flow modeling implementation was improved to simulate single bubble behavior with molten salt media. The large density and viscosity ratios between typical gases and molten salt liquids present challenges for these types of numerical solvers. With enhancements to the pressure projection method, MOSCATO’s Level-Set solver was able to be successfully validated to experiments related to helium bubble rise in stagnant molten salt. The simulated bubble rising velocity showed reasonable good agreement with experimental measurements. The bubble shape and dynamics were also visually compared with experimental snapshots, demonstrating a good qualitative match. 2. Generation of mass transfer correlations for multiphase flow systems. To enable calculations of the tritium transport across the interface between gas bubbles and salt, we modeled high- Schmidt-number mass transfer around a sphere across a broad range of Reynolds numbers. The mesh near the sphere surface was highly refined to resolve steep concentration gradients caused by the low diffusion coefficient. Literature-based mass transfer correlations were compared with the numerical results, and modifications were proposed to improve agreement, particularly at higher Schmidt numbers. These mass transfer correlations were subsequently provided to other national laboratories to help enable high quality mass transfer simulations using lower-order solvers under development within the NEAMS program. 3. Preliminary implementation of a bubbly flow solver. To model bubbly flow in molten salt, we implemented a bubbly flow solver for void fractions less than 5%. To do so, an algebraic relative velocity model that assumes small bubbles with rapid momentum equilibration was added to MOSCATO to compute bubble velocities. Preliminary comparisons with experimental data showed reasonable agreement, and further improvements are underway. 4. Generation of mass transfer correlations for MSRE subchannel The Molten-Salt Reactor Experiment (MSRE) was a landmark historical project that demonstrated the feasibility of molten-salt reactor technology. The MSRE campaign also generated a significant body of experimental data and reports that continue to support molten-salt–related research. In this report, the MSRE core subchannel was used as the reference geometry for a mass transfer study performed with MOSCATO. The geometry and computational mesh were adapted from a previous study, providing adequate resolution for the relatively low Reynolds number in this case. Additional mesh refinement was applied to reach higher Schmidt numbers, enabling the derivation of a reliable mass-transfer correlation for the present scenario. 5. Simulations of oxygen ingressions into molten salt. In the previous fiscal year, we initiated a study to simulate oxygen ingression in stagnant salt. As oxygen enters the salt through its surface, it reacts with Ce 3+ to form solid CeO 2 and other reaction products. To more fully capture the complex diffusion-convection-reaction mechanisms, capabilities for modeling natural convection in the salt vessel were added. These were needed as the flow of the ingressed gas induced flow in the salt caused by surface shear and non-isothermal effects. With these updated physics in place, we were able to successfully reproduce the experimental results for the rate of change of CeCl 3 concentrations versus time. 6. Flow corrosion model validation. In FY24, MOSCATO’s corrosion model was validated against static corrosion experiments. In FY25, this work was extended to a flow corrosion experiment, where FLiNaK salt was driven by natural convection, with initial salt impurities to initiate corrosion. Despite uncertainties in parameters such as elemental diffusion coefficients in the alloy and unknown H + concentrations, the simulations achieved good agreement with experimental results, especially in predicting sample mass losses.
Sulfur atoms serve as key players in diverse chemical processes, from astrochemistry at very low temperature to combustion at high temperature. Building upon our prior findings, showing cyclization to thiophenes following the reaction of ground-state sulfur atoms with dienes, we here extend this investigation to include many additional reaction products, guided by detailed theoretical predictions. The outcomes highlight the complex formation of products during intersystem crossing (ISC) to the singlet surfaces. Here, we employed crossed-beam velocity map imaging and high-level ab initio methods to explore the reaction of S( 3 P) with 1,3-butadiene and isoprene under single-collision conditions and in low-temperature flows. For the butadiene reaction, our experimental results show the formation of thiophene via H 2 loss, a 2H-thiophenyl radical through H loss, and thioketene through ethene loss at a slightly higher collision energy compared to previous observations. Complementary Chirped-Pulse Fourier-Transform mmWave spectroscopy (CP-FTmmW) measurements in a uniform flow confirmed the formation of thioketene in the reaction at 20 K. For the isoprene reaction, we observed analogous products along with the 2H-thiophenyl radical arising from methyl loss and C 3 H 4 S (loss of ethene or H 2 + acetylene). CP-FTmmW detected the formation of thioformaldehyde via loss of 1,3-butadiene, again in the 20 K flow. Coupled-cluster calculations on the pathways found by the automated kinetic workflow code KinBot support these findings and indicate ISC to the singlet surface, leading to the generation of various long-lived intermediates, including 5-membered heterocycles.
This project was motivated primarily by the opportunity of turning photocatalysis into a cost efficient hydrogen generation method for domestic energy and chemical production, and by the need to provide detailed mechanisms of photocatalytic reactions of broad scientific and technological interest. Specifically, we focused on the development of a new technique for analysis of (photo)catalytic reaction mechanisms to guide photocatalyst design. Our approach was based on applying velocity map imaging (VMI) to surface catalyzed reactions in order to identify photocatalytic reaction products, intermediates, and relate these to photocatalyst composition, dimensions, size and other characteristics. By coupling VMI with other spectroscopic and microstructural characterization, we aimed to reveal the features that limit performance of photocatalysis. As a first step to achieve this goal, we constructed a custom VMI microscope specifically designed for investigation of surface photocatalytic reactions and validated it’s design using a photodissociatinon of MnBr(CO) 5 adsorbed on a metallic surface. Using both 230 nm and 266 nm pulsed laser excitations, we observed that there are likely three main pathways for photodissociation of Mn(CO)5Br: from the gas phase, the surface, and ejected Mn complex from the surface increasing the gas phase concentration.
Abstract Cellulases are largely afflicted by inhibition from their reaction products, especially at high-substrate loading, which represents a major challenge for biomass processing. This challenge was overcome for endoglucanase 1 (E1) from Acidothermus cellulolyticus by identifying a large conformational change involving distal residues upon binding cellobiose. Having introduced alanine substitutions at each of these residues, we identified several mutations that reduced cellobiose inhibition of E1, including W212A, W213A, Q247A, W249A and F250A. One of the mutations (W212A) resulted in a 47-fold decrease in binding affinity of cellobiose as well as a 5-fold increase in the kcat. The mutation further increased E1 activity on Avicel and dilute-acid treated corn stover and enhanced its productivity at high-substrate loadings. These findings were corroborated by funnel metadynamics, which showed that the W212A substitution led to reduced affinity for cellobiose in the +1 and +2 binding sites due to rearrangement of key cellobiose-binding residues.
Capturing CO2 from air is urgent to battle against the climate change. Traditional CO2 capture by alkaline solution or aqueous amine has high regeneration cost, equipment corrosion, and amine leakage. Deep eutectic solvents (DESs) are promising alternatives with low corrosion, non-toxicity, and biodegradable nature. Functionalized DESs can capture and convert CO2 at low partial pressures. Developing reactive DESs for efficient CO2 capture needs a foundational understanding of the reaction-transport coupling of CO2 at the air-DES interface. In this study, we develop a deep learning potential (DLP) to investigate the absorption and reaction of CO2 at the air-DES interface (DES: 1-ethyl-3-methylimidazolium 2-cyanopyrrolide ([Emim][2-CNpyr]) and ethylene glycol (EG)). The DLP model allows us to simulate chemical reactions at a lower computational cost with ab initio accuracy. By analyzing reaction free energy surfaces, molecular interactions among CO2, DES components and reaction products, and transport of CO2 through the interface, we identify three main reaction pathways of CO2 at the interface: forming carboxylate with [Emim], carbamate with [2-CNpyr], and carbonate with EG. The mechanistic understanding of CO2 chemisorption at the interface will facilitate the development of novel direct air capture technology using DESs.
Overview of RENEW project that facilitates the education and mentorships of underrepresented students in isotope production research.
The formation of carbon via the triple alpha process is a key step in stellar production reactions of light ions and heavily impacts the life-cycle of red giant stars. Here, we propose a novel theoretical approach for sequential mechanism of the helium burning process, based on the Imaginary Time Method (ITM) and semiclassical models. We compare our results to those of the NACRE collaboration, which has set the standard for the past decades. Our calculations differ by several orders of magnitude in the low temperature region, which may seriously affect the early evolution of helium burning stars.
By providing a large gaseous volume for nuclear interactions while simultaneously recording the tracks of resulting reaction products, an active target serves as both a thick target and a detector. Once a reaction occurs, the emitted charged fragments strip electrons from the target gas along their path as they transverse the detector. Collection of these stripped electrons allow for detection of the product tracks. As beam intensity increases, the resulting ionization in the active target can significantly distort this collection of electrons. If left uncorrected, the resulting measurements could be wrong. In this paper, we investigate the impact of the space charge produced by heavy radioactive beams within the Active Target - Time Projection Chamber at Michigan State University. The beams are injected parallel to the electric field of the time projection chamber which is operated without a magnetic field for this experiment. Furthermore, we analyze the rate dependence of the space charge effects and demonstrate that they can be modeled and effectively corrected.
Here, we combine crossed-beam velocity map imaging with high-level ab initio/transition state theory modeling of the reaction of S( 3 P) with 1,3-butadiene and isoprene under single collision conditions. For the butadiene reaction, we detect both H and H 2 loss from the initial adduct, and from reaction with isoprene, we see both H loss and methyl loss. Theoretical calculations confirm these arise following intersystem crossing to the singlet surface forming long-lived intermediates. For the butadiene reaction, these lose H 2 to form thiophene as the dominant channel, H to form the detected 2H-thiophenyl radical, or ethene, giving thioketene. For isoprene, additional reaction products are suggested by theory, including the observed H and methyl loss radicals, but also methyl thiophene, thioformaldehyde, and thioketene. The results for S( 3 P) + 1,3-butadiene, showing direct cyclization to the aromatic product and yielding few bimolecular product channels, are in striking contrast to those for the analogous O( 3 P) reaction.
Mass spectrometry (MS) enables detection of different chemical species with a very high specificity; however, it can be limited by its throughput. Integrating MS with microfluidics has a tremendous potential to improve throughput and accelerate biochemical research. In this work, we introduce Drop-NIMS, a combination of a passive droplet loading microfluidic device and a matrix-free MS laser desorption ionization technique called nanostructure-initiator mass spectrometry (NIMS). This platform combines different droplets at random to generate a combinatorial library of enzymatic reactions that are deposited directly on the NIMS surface without requiring additional sample handling. The enzyme reaction products are then detected with MS. Drop-NIMS was used to rapidly screen enzymatic reactions containing low (on the order of nL) volumes of glycoside reactants and glycoside hydrolase enzymes per reaction. MS “barcodes” (small compounds with unique masses) were added to the droplets to identify different combinations of substrates and enzymes created by the device. We assigned xylanase activities to several putative glycoside hydrolases, making them relevant to food and biofuel industrial applications. Overall, Drop-NIMS is simple to fabricate, assemble, and operate and it has potential to be used with many other small molecule metabolites.
The reactions of carbonyl oxides (“Criegee intermediates”) with organic and inorganic acids have been postulated to proceed predominantly by an insertion mechanism, and the hydroperoxy-substituted ester products from reactions with organic acids have been spectroscopically observed. Here this work characterizes the products from one of the simplest reactions of carbonyl oxides with inorganic acids, that of formaldehyde oxide, CH 2 OO, with hydrogen chloride, which occurs via a 1,2-insertion in the H–Cl bond. Reactions of both HCl and DCl isotopologues yield product signal at the mass of the insertion product chloro(hydroperoxy)methane and a dissociative ionisation peak at the mass of the protonated (or deuteronated) Criegee intermediate. The isotopic composition of the insertion product has been measured for reaction mixtures where both HCl isotopologues are present, and the H/D ratio of the product is consistently higher (by a factor of 1.6 ± 0.3) than that of the reactants. This isotope selectivity in the products has smaller uncertainty than the ratio of measured rate coefficients and suggests a normal (k H > k D ) kinetic isotope effect in the reaction. Theoretical kinetics calculations predict a small normal kinetic isotope effect for the overall reaction (k H / k D = 1.35 at 20 Torr N 2 and k H / k D = 1.2 for 1 atm N 2 ) but predict a substantial inverse kinetic isotope effect (k D > k H ) for the stabilisation fraction, in disagreement with the experimental observation.
Imidazoles are present in Earth's atmosphere in both the gas-phase and in aerosol particles, and have been implicated in the formation of brown carbon aerosols. The gas-phase oxidation of imidazole (C 3 N 2 H 4 ) by hydroxyl radicals has been shown to be preferentially initiated via OH-addition to position C5, producing the 5-hydroxyimidazolyl radical adduct. However, the fate of this adduct upon reaction with O 2 in the atmospheric gas-phase is currently unknown. We employed an automated approach to investigate the reaction mechanism and kinetics of imidazole's OH-initiated gas-phase oxidation, in the presence of O 2 and NO x . The explored mechanism included reactions available to first-generation RO 2 radicals, as well as alkoxyl radicals produced from RO 2 + NO reactions. Product distributions were obtained by assembling and solving a master equation, under conditions relevant to the Earth's atmosphere. Our calculations show a complex, branched reaction mechanism, which nevertheless converges to yield two major closed-shell products: 4H-imidazol-4-ol (4H-4ol) and N,N′-diformylformamidine (FMF). At 298 K and 1 atm, we estimate the yields of 4H-4ol and FMF from imidazole oxidation initiated via OH-addition to position C5 to be 34 : 66, 12 : 85 and 2 : 95 under 10 ppt, 100 ppt and 1 ppb of NO respectively. This work also revealed O 2 -migration pathways between the α-N-imino peroxyl radical isomers. This reaction channel is fast for the first-generation RO 2 radicals, and may be important during the atmospheric oxidation of other unsaturated organic nitrogen compounds as well.
The inertial confinement fusion program relies upon detailed simulations with inertial confinement fusion (ICF) codes to design targets and to interpret the experimental results. These simulations treat as much physics from essential principles as is practical, including laser deposition, cross beam energy transfer, x-ray production and transport, nonlocal thermal equilibrium kinetics, thermal transport, hydrodynamic instabilities, thermonuclear burn, and transport of reaction products. Improvements in radiation hydrodynamic code capabilities and vast increases in computing power have enabled more realistic, accurate 3D simulations that treat all known asymmetry sources. We describe how numerical simulations helped to guide the program, assess the impediments to breakeven, and optimize every aspect of target design. A preshot simulation of the first National Ignition Facility experiment that surpassed breakeven predicted an increased yield that matches the experimental result, within the preshot predicted uncertainty, with a target gain of 1.5. We will cover the key developments in Lawrence Livermore National Laboratory ICF codes that enabled these simulations and give specific examples of how they helped to guide the program.
Here a relativistic structure model has previously been used to predict a halo structure for 31 Ne, consistent with halo signatures from measured reaction cross sections of Ne isotopes bombarding Carbon targets. However, previous attempts to calculate those cross sections with reaction models were missing contributions from resonances and pairing correlations in their structure input. Use a reaction model with our relativistic fully microscopic structure model input to predict these cross sections and momentum distributions and analyze for possible halo signatures. Structure input for exotic Ne isotopes were obtained via the analytical continuation of the coupling constant (ACCC) method based on the relativistic mean field (RMF) theory with Bardeen - Cooper - Schrieffer (BCS) pairing approximation, the RAB approach. Total reaction cross sections, one-neutron removal cross sections, and momentum distributions of breakup reaction products were calculated with a Glauber model using our relativistic structure input. Our predictions of total reaction and one-neutron removal cross sections of 31 Ne on a Carbon target were significantly enhanced compared with those of neighboring Neon isotopes, agreeing with measurements at 240 MeV/nucleon and consistent with a single neutron halo. Furthermore, our calculations of the inclusive longitudinal momentum distribution of the 30 Ne and valence neutron residues from the 31 Ne breakup reaction indicate a dilute density distribution in coordinate space, another halo signature. We give a full description of the halo nature of 31 Ne that includes a self-consistent use of pairing and continuum contributions that makes predictions consistent with reaction cross section measurements. This approach can be utilized to determine the halo structure of other exotic nuclei.
The 2-methyltetrols have been widely chosen as chemical tracers for isoprene-derived secondary organic aerosols. While they are often assumed to be relatively unreactive, a laboratory study reported that pure erythritol particles (an analog of 2-methyltetrols) can be heterogeneously oxidized by gas-phase OH radicals at a significant rate. This might question the efficacy of these compounds as tracers in aerosol source-apportionment studies. Additional uncertainty could arise as organic compounds and inorganic salts often coexist in atmospheric particles. To gain more insights into the chemical stability of 2-methyltetrols in atmospheric particles, this study investigates the heterogeneous OH oxidation of pure erythritol particles and particles containing erythritol and ammonium sulfate (AS) at different dry inorganic-to-organic mass ratios (IOR) in an aerosol flow tube reactor at a high relative humidity of 85 %. The same reaction products are formed upon heterogenous OH oxidation of erythritol and erythritol–AS particles, suggesting that the reaction pathways are not strongly affected by the presence and amount of AS. On the other hand, the effective OH uptake coefficient, $γ_{eff}$, is found to decrease by about a factor of ~20 from 0.45±0.025 to 0.02±0.001 when the relative abundance of AS increases and the IOR increases from 0.0 to 5.0. One likely explanation is the presence of dissolved ions slows down the reaction rates by decreasing the surface concentration of erythritol and reducing the frequency of collision between erythritol and gas-phase OH radicals at the particle surface. Hence, the heterogeneous OH reactivity of erythritol and likely 2-methyltetrols in atmospheric particles would be slower than previously thought when the salts are present. Given 2-methyltetrols often coexist with a significant amount of AS in many environments, where ambient IOR can vary from ~1.89 to ~250, our kinetic data would suggest that 2-methyltetrols in atmospheric particles are likely chemically stable against heterogeneous OH oxidation under humid conditions.
Reactive sulfane sulfur species such as persulfides (RSSH) and H 2 S 2 are important redox regulators and closely linked to H 2 S signaling. However, the study of these species is still challenging due to their instability, high reactivity, and the lack of suitable donors to produce them. Herein we report a unique compound, 2H-thiopyran-2-thione sulfine (TTS), which can specifically convert H 2 S to HSOH, and then to H 2 S 2 in the presence of excess H 2 S. Meanwhile, the reaction product 2H-thiopyran-2-thione (TT) can be oxidized to reform TTS by biological oxidants. The reaction mechanism of TTS is studied experimentally and computationally. TTS can be conjugated to proteins to achieve specific delivery, and the combination of TTS and H 2 S leads to highly efficient protein persulfidation. When TTS is applied in conjunction with established H 2 S donors, the corresponding donors of H 2 S 2 (or its equivalents) are obtained. Cell-based studies reveal that TTS can effectively increase intracellular sulfane sulfur levels and compensate for certain aspects of sulfide:quinone oxidoreductase (SQR) deficiency. These properties make TTS a conceptually new strategy for the design of donors of reactive sulfane sulfur species.